From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/mstar/Kconfig | 16 +++ drivers/clk/mstar/Makefile | 7 ++ drivers/clk/mstar/clk-msc313-cpupll.c | 220 ++++++++++++++++++++++++++++++++++ drivers/clk/mstar/clk-msc313-mpll.c | 155 ++++++++++++++++++++++++ 4 files changed, 398 insertions(+) create mode 100644 drivers/clk/mstar/Kconfig create mode 100644 drivers/clk/mstar/Makefile create mode 100644 drivers/clk/mstar/clk-msc313-cpupll.c create mode 100644 drivers/clk/mstar/clk-msc313-mpll.c (limited to 'drivers/clk/mstar') diff --git a/drivers/clk/mstar/Kconfig b/drivers/clk/mstar/Kconfig new file mode 100644 index 000000000..b9bcb5e02 --- /dev/null +++ b/drivers/clk/mstar/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only +config MSTAR_MSC313_CPUPLL + bool "MStar CPUPLL driver" + depends on ARCH_MSTARV7 || COMPILE_TEST + default ARCH_MSTARV7 + help + Support for the CPU PLL present on MStar/Sigmastar SoCs. + +config MSTAR_MSC313_MPLL + bool "MStar MPLL driver" + depends on ARCH_MSTARV7 || COMPILE_TEST + default ARCH_MSTARV7 + select REGMAP_MMIO + help + Support for the MPLL PLL and dividers block present on + MStar/Sigmastar SoCs. diff --git a/drivers/clk/mstar/Makefile b/drivers/clk/mstar/Makefile new file mode 100644 index 000000000..17d97eedc --- /dev/null +++ b/drivers/clk/mstar/Makefile @@ -0,0 +1,7 @@ +# SPDX-License-Identifier: GPL-2.0 +# +# Makefile for mstar specific clk +# + +obj-$(CONFIG_MSTAR_MSC313_CPUPLL) += clk-msc313-cpupll.o +obj-$(CONFIG_MSTAR_MSC313_MPLL) += clk-msc313-mpll.o diff --git a/drivers/clk/mstar/clk-msc313-cpupll.c b/drivers/clk/mstar/clk-msc313-cpupll.c new file mode 100644 index 000000000..a93e2dba0 --- /dev/null +++ b/drivers/clk/mstar/clk-msc313-cpupll.c @@ -0,0 +1,220 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2019 Daniel Palmer + */ + +#include +#include +#include +#include +#include + +/* + * This IP is not documented outside of the messy vendor driver. + * Below is what we think the registers look like based on looking at + * the vendor code and poking at the hardware: + * + * 0x140 -- LPF low. Seems to store one half of the clock transition + * 0x144 / + * 0x148 -- LPF high. Seems to store one half of the clock transition + * 0x14c / + * 0x150 -- vendor code says "toggle lpf enable" + * 0x154 -- mu? + * 0x15c -- lpf_update_count? + * 0x160 -- vendor code says "switch to LPF". Clock source config? Register bank? + * 0x164 -- vendor code says "from low to high" which seems to mean transition from LPF low to + * LPF high. + * 0x174 -- Seems to be the PLL lock status bit + * 0x180 -- Seems to be the current frequency, this might need to be populated by software? + * 0x184 / The vendor driver uses these to set the initial value of LPF low + * + * Frequency seems to be calculated like this: + * (parent clock (432mhz) / register_magic_value) * 16 * 524288 + * Only the lower 24 bits of the resulting value will be used. In addition, the + * PLL doesn't seem to be able to lock on frequencies lower than 220 MHz, as + * divisor 0xfb586f (220 MHz) works but 0xfb7fff locks up. + * + * Vendor values: + * frequency - register value + * + * 400000000 - 0x0067AE14 + * 600000000 - 0x00451EB8, + * 800000000 - 0x0033D70A, + * 1000000000 - 0x002978d4, + */ + +#define REG_LPF_LOW_L 0x140 +#define REG_LPF_LOW_H 0x144 +#define REG_LPF_HIGH_BOTTOM 0x148 +#define REG_LPF_HIGH_TOP 0x14c +#define REG_LPF_TOGGLE 0x150 +#define REG_LPF_MYSTERYTWO 0x154 +#define REG_LPF_UPDATE_COUNT 0x15c +#define REG_LPF_MYSTERYONE 0x160 +#define REG_LPF_TRANSITIONCTRL 0x164 +#define REG_LPF_LOCK 0x174 +#define REG_CURRENT 0x180 + +#define LPF_LOCK_TIMEOUT 100000000 + +#define MULTIPLIER_1 16 +#define MULTIPLIER_2 524288 +#define MULTIPLIER (MULTIPLIER_1 * MULTIPLIER_2) + +struct msc313_cpupll { + void __iomem *base; + struct clk_hw clk_hw; +}; + +#define to_cpupll(_hw) container_of(_hw, struct msc313_cpupll, clk_hw) + +static u32 msc313_cpupll_reg_read32(struct msc313_cpupll *cpupll, unsigned int reg) +{ + u32 value; + + value = ioread16(cpupll->base + reg + 4) << 16; + value |= ioread16(cpupll->base + reg); + + return value; +} + +static void msc313_cpupll_reg_write32(struct msc313_cpupll *cpupll, unsigned int reg, u32 value) +{ + u16 l = value & 0xffff, h = (value >> 16) & 0xffff; + + iowrite16(l, cpupll->base + reg); + iowrite16(h, cpupll->base + reg + 4); +} + +static void msc313_cpupll_setfreq(struct msc313_cpupll *cpupll, u32 regvalue) +{ + ktime_t timeout; + + msc313_cpupll_reg_write32(cpupll, REG_LPF_HIGH_BOTTOM, regvalue); + + iowrite16(0x1, cpupll->base + REG_LPF_MYSTERYONE); + iowrite16(0x6, cpupll->base + REG_LPF_MYSTERYTWO); + iowrite16(0x8, cpupll->base + REG_LPF_UPDATE_COUNT); + iowrite16(BIT(12), cpupll->base + REG_LPF_TRANSITIONCTRL); + + iowrite16(0, cpupll->base + REG_LPF_TOGGLE); + iowrite16(1, cpupll->base + REG_LPF_TOGGLE); + + timeout = ktime_add_ns(ktime_get(), LPF_LOCK_TIMEOUT); + while (!(ioread16(cpupll->base + REG_LPF_LOCK))) { + if (ktime_after(ktime_get(), timeout)) { + pr_err("timeout waiting for LPF_LOCK\n"); + return; + } + cpu_relax(); + } + + iowrite16(0, cpupll->base + REG_LPF_TOGGLE); + + msc313_cpupll_reg_write32(cpupll, REG_LPF_LOW_L, regvalue); +} + +static unsigned long msc313_cpupll_frequencyforreg(u32 reg, unsigned long parent_rate) +{ + unsigned long long prescaled = ((unsigned long long)parent_rate) * MULTIPLIER; + + if (prescaled == 0 || reg == 0) + return 0; + return DIV_ROUND_DOWN_ULL(prescaled, reg); +} + +static u32 msc313_cpupll_regforfrequecy(unsigned long rate, unsigned long parent_rate) +{ + unsigned long long prescaled = ((unsigned long long)parent_rate) * MULTIPLIER; + + if (prescaled == 0 || rate == 0) + return 0; + return DIV_ROUND_UP_ULL(prescaled, rate); +} + +static unsigned long msc313_cpupll_recalc_rate(struct clk_hw *hw, unsigned long parent_rate) +{ + struct msc313_cpupll *cpupll = to_cpupll(hw); + + return msc313_cpupll_frequencyforreg(msc313_cpupll_reg_read32(cpupll, REG_LPF_LOW_L), + parent_rate); +} + +static long msc313_cpupll_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + u32 reg = msc313_cpupll_regforfrequecy(rate, *parent_rate); + long rounded = msc313_cpupll_frequencyforreg(reg, *parent_rate); + + /* + * This is my poor attempt at making sure the resulting + * rate doesn't overshoot the requested rate. + */ + for (; rounded >= rate && reg > 0; reg--) + rounded = msc313_cpupll_frequencyforreg(reg, *parent_rate); + + return rounded; +} + +static int msc313_cpupll_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long parent_rate) +{ + struct msc313_cpupll *cpupll = to_cpupll(hw); + u32 reg = msc313_cpupll_regforfrequecy(rate, parent_rate); + + msc313_cpupll_setfreq(cpupll, reg); + + return 0; +} + +static const struct clk_ops msc313_cpupll_ops = { + .recalc_rate = msc313_cpupll_recalc_rate, + .round_rate = msc313_cpupll_round_rate, + .set_rate = msc313_cpupll_set_rate, +}; + +static const struct of_device_id msc313_cpupll_of_match[] = { + { .compatible = "mstar,msc313-cpupll" }, + {} +}; + +static int msc313_cpupll_probe(struct platform_device *pdev) +{ + struct clk_init_data clk_init = {}; + struct clk_parent_data cpupll_parent = { .index = 0 }; + struct device *dev = &pdev->dev; + struct msc313_cpupll *cpupll; + int ret; + + cpupll = devm_kzalloc(&pdev->dev, sizeof(*cpupll), GFP_KERNEL); + if (!cpupll) + return -ENOMEM; + + cpupll->base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(cpupll->base)) + return PTR_ERR(cpupll->base); + + /* LPF might not contain the current frequency so fix that up */ + msc313_cpupll_reg_write32(cpupll, REG_LPF_LOW_L, + msc313_cpupll_reg_read32(cpupll, REG_CURRENT)); + + clk_init.name = dev_name(dev); + clk_init.ops = &msc313_cpupll_ops; + clk_init.parent_data = &cpupll_parent; + clk_init.num_parents = 1; + cpupll->clk_hw.init = &clk_init; + + ret = devm_clk_hw_register(dev, &cpupll->clk_hw); + if (ret) + return ret; + + return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_simple_get, &cpupll->clk_hw); +} + +static struct platform_driver msc313_cpupll_driver = { + .driver = { + .name = "mstar-msc313-cpupll", + .of_match_table = msc313_cpupll_of_match, + }, + .probe = msc313_cpupll_probe, +}; +builtin_platform_driver(msc313_cpupll_driver); diff --git a/drivers/clk/mstar/clk-msc313-mpll.c b/drivers/clk/mstar/clk-msc313-mpll.c new file mode 100644 index 000000000..61beb4e87 --- /dev/null +++ b/drivers/clk/mstar/clk-msc313-mpll.c @@ -0,0 +1,155 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * MStar MSC313 MPLL driver + * + * Copyright (C) 2020 Daniel Palmer + */ + +#include +#include +#include +#include + +#define REG_CONFIG1 0x8 +#define REG_CONFIG2 0xc + +static const struct regmap_config msc313_mpll_regmap_config = { + .reg_bits = 16, + .val_bits = 16, + .reg_stride = 4, +}; + +static const struct reg_field config1_loop_div_first = REG_FIELD(REG_CONFIG1, 8, 9); +static const struct reg_field config1_input_div_first = REG_FIELD(REG_CONFIG1, 4, 5); +static const struct reg_field config2_output_div_first = REG_FIELD(REG_CONFIG2, 12, 13); +static const struct reg_field config2_loop_div_second = REG_FIELD(REG_CONFIG2, 0, 7); + +static const unsigned int output_dividers[] = { + 2, 3, 4, 5, 6, 7, 10 +}; + +#define NUMOUTPUTS (ARRAY_SIZE(output_dividers) + 1) + +struct msc313_mpll { + struct clk_hw clk_hw; + struct regmap_field *input_div; + struct regmap_field *loop_div_first; + struct regmap_field *loop_div_second; + struct regmap_field *output_div; + struct clk_hw_onecell_data *clk_data; +}; + +#define to_mpll(_hw) container_of(_hw, struct msc313_mpll, clk_hw) + +static unsigned long msc313_mpll_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct msc313_mpll *mpll = to_mpll(hw); + unsigned int input_div, output_div, loop_first, loop_second; + unsigned long output_rate; + + regmap_field_read(mpll->input_div, &input_div); + regmap_field_read(mpll->output_div, &output_div); + regmap_field_read(mpll->loop_div_first, &loop_first); + regmap_field_read(mpll->loop_div_second, &loop_second); + + output_rate = parent_rate / (1 << input_div); + output_rate *= (1 << loop_first) * max(loop_second, 1U); + output_rate /= max(output_div, 1U); + + return output_rate; +} + +static const struct clk_ops msc313_mpll_ops = { + .recalc_rate = msc313_mpll_recalc_rate, +}; + +static const struct clk_parent_data mpll_parent = { + .index = 0, +}; + +static int msc313_mpll_probe(struct platform_device *pdev) +{ + void __iomem *base; + struct msc313_mpll *mpll; + struct clk_init_data clk_init = { }; + struct device *dev = &pdev->dev; + struct regmap *regmap; + char *outputname; + struct clk_hw *divhw; + int ret, i; + + mpll = devm_kzalloc(dev, sizeof(*mpll), GFP_KERNEL); + if (!mpll) + return -ENOMEM; + + base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(base)) + return PTR_ERR(base); + + regmap = devm_regmap_init_mmio(dev, base, &msc313_mpll_regmap_config); + if (IS_ERR(regmap)) + return PTR_ERR(regmap); + + mpll->input_div = devm_regmap_field_alloc(dev, regmap, config1_input_div_first); + if (IS_ERR(mpll->input_div)) + return PTR_ERR(mpll->input_div); + mpll->output_div = devm_regmap_field_alloc(dev, regmap, config2_output_div_first); + if (IS_ERR(mpll->output_div)) + return PTR_ERR(mpll->output_div); + mpll->loop_div_first = devm_regmap_field_alloc(dev, regmap, config1_loop_div_first); + if (IS_ERR(mpll->loop_div_first)) + return PTR_ERR(mpll->loop_div_first); + mpll->loop_div_second = devm_regmap_field_alloc(dev, regmap, config2_loop_div_second); + if (IS_ERR(mpll->loop_div_second)) + return PTR_ERR(mpll->loop_div_second); + + mpll->clk_data = devm_kzalloc(dev, struct_size(mpll->clk_data, hws, + ARRAY_SIZE(output_dividers)), GFP_KERNEL); + if (!mpll->clk_data) + return -ENOMEM; + + clk_init.name = dev_name(dev); + clk_init.ops = &msc313_mpll_ops; + clk_init.parent_data = &mpll_parent; + clk_init.num_parents = 1; + mpll->clk_hw.init = &clk_init; + + ret = devm_clk_hw_register(dev, &mpll->clk_hw); + if (ret) + return ret; + + mpll->clk_data->num = NUMOUTPUTS; + mpll->clk_data->hws[0] = &mpll->clk_hw; + + for (i = 0; i < ARRAY_SIZE(output_dividers); i++) { + outputname = devm_kasprintf(dev, GFP_KERNEL, "%s_div_%u", + clk_init.name, output_dividers[i]); + if (!outputname) + return -ENOMEM; + divhw = devm_clk_hw_register_fixed_factor(dev, outputname, + clk_init.name, 0, 1, output_dividers[i]); + if (IS_ERR(divhw)) + return PTR_ERR(divhw); + mpll->clk_data->hws[i + 1] = divhw; + } + + platform_set_drvdata(pdev, mpll); + + return devm_of_clk_add_hw_provider(&pdev->dev, of_clk_hw_onecell_get, + mpll->clk_data); +} + +static const struct of_device_id msc313_mpll_of_match[] = { + { .compatible = "mstar,msc313-mpll", }, + {} +}; + +static struct platform_driver msc313_mpll_driver = { + .driver = { + .name = "mstar-msc313-mpll", + .of_match_table = msc313_mpll_of_match, + }, + .probe = msc313_mpll_probe, +}; +builtin_platform_driver(msc313_mpll_driver); -- cgit v1.2.3