From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/renesas/r7s9210-cpg-mssr.c | 226 +++++++++++++++++++++++++++++++++ 1 file changed, 226 insertions(+) create mode 100644 drivers/clk/renesas/r7s9210-cpg-mssr.c (limited to 'drivers/clk/renesas/r7s9210-cpg-mssr.c') diff --git a/drivers/clk/renesas/r7s9210-cpg-mssr.c b/drivers/clk/renesas/r7s9210-cpg-mssr.c new file mode 100644 index 000000000..a85227c24 --- /dev/null +++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c @@ -0,0 +1,226 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * R7S9210 Clock Pulse Generator / Module Standby + * + * Based on r8a7795-cpg-mssr.c + * + * Copyright (C) 2018 Chris Brandt + * Copyright (C) 2018 Renesas Electronics Corp. + * + */ + +#include +#include +#include +#include +#include "renesas-cpg-mssr.h" + +#define CPG_FRQCR 0x00 + +static u8 cpg_mode; + +/* Internal Clock ratio table */ +static const struct { + unsigned int i; + unsigned int g; + unsigned int b; + unsigned int p1; + /* p0 is always 32 */; +} ratio_tab[5] = { /* I, G, B, P1 */ + { 2, 4, 8, 16}, /* FRQCR = 0x012 */ + { 4, 4, 8, 16}, /* FRQCR = 0x112 */ + { 8, 4, 8, 16}, /* FRQCR = 0x212 */ + { 16, 8, 16, 16}, /* FRQCR = 0x322 */ + { 16, 16, 32, 32}, /* FRQCR = 0x333 */ + }; + +enum rz_clk_types { + CLK_TYPE_RZA_MAIN = CLK_TYPE_CUSTOM, + CLK_TYPE_RZA_PLL, +}; + +enum clk_ids { + /* Core Clock Outputs exported to DT */ + LAST_DT_CORE_CLK = R7S9210_CLK_P0, + + /* External Input Clocks */ + CLK_EXTAL, + + /* Internal Core Clocks */ + CLK_MAIN, + CLK_PLL, + + /* Module Clocks */ + MOD_CLK_BASE +}; + +static struct cpg_core_clk r7s9210_early_core_clks[] = { + /* External Clock Inputs */ + DEF_INPUT("extal", CLK_EXTAL), + + /* Internal Core Clocks */ + DEF_BASE(".main", CLK_MAIN, CLK_TYPE_RZA_MAIN, CLK_EXTAL), + DEF_BASE(".pll", CLK_PLL, CLK_TYPE_RZA_PLL, CLK_MAIN), + + /* Core Clock Outputs */ + DEF_FIXED("p1c", R7S9210_CLK_P1C, CLK_PLL, 16, 1), +}; + +static const struct mssr_mod_clk r7s9210_early_mod_clks[] __initconst = { + DEF_MOD_STB("ostm2", 34, R7S9210_CLK_P1C), + DEF_MOD_STB("ostm1", 35, R7S9210_CLK_P1C), + DEF_MOD_STB("ostm0", 36, R7S9210_CLK_P1C), +}; + +static struct cpg_core_clk r7s9210_core_clks[] = { + /* Core Clock Outputs */ + DEF_FIXED("i", R7S9210_CLK_I, CLK_PLL, 2, 1), + DEF_FIXED("g", R7S9210_CLK_G, CLK_PLL, 4, 1), + DEF_FIXED("b", R7S9210_CLK_B, CLK_PLL, 8, 1), + DEF_FIXED("p1", R7S9210_CLK_P1, CLK_PLL, 16, 1), + DEF_FIXED("p0", R7S9210_CLK_P0, CLK_PLL, 32, 1), +}; + +static const struct mssr_mod_clk r7s9210_mod_clks[] __initconst = { + DEF_MOD_STB("scif4", 43, R7S9210_CLK_P1C), + DEF_MOD_STB("scif3", 44, R7S9210_CLK_P1C), + DEF_MOD_STB("scif2", 45, R7S9210_CLK_P1C), + DEF_MOD_STB("scif1", 46, R7S9210_CLK_P1C), + DEF_MOD_STB("scif0", 47, R7S9210_CLK_P1C), + + DEF_MOD_STB("usb1", 60, R7S9210_CLK_B), + DEF_MOD_STB("usb0", 61, R7S9210_CLK_B), + DEF_MOD_STB("ether1", 64, R7S9210_CLK_B), + DEF_MOD_STB("ether0", 65, R7S9210_CLK_B), + + DEF_MOD_STB("spibsc", 83, R7S9210_CLK_P1), + DEF_MOD_STB("i2c3", 84, R7S9210_CLK_P1), + DEF_MOD_STB("i2c2", 85, R7S9210_CLK_P1), + DEF_MOD_STB("i2c1", 86, R7S9210_CLK_P1), + DEF_MOD_STB("i2c0", 87, R7S9210_CLK_P1), + + DEF_MOD_STB("spi2", 95, R7S9210_CLK_P1), + DEF_MOD_STB("spi1", 96, R7S9210_CLK_P1), + DEF_MOD_STB("spi0", 97, R7S9210_CLK_P1), + + DEF_MOD_STB("sdhi11", 100, R7S9210_CLK_B), + DEF_MOD_STB("sdhi10", 101, R7S9210_CLK_B), + DEF_MOD_STB("sdhi01", 102, R7S9210_CLK_B), + DEF_MOD_STB("sdhi00", 103, R7S9210_CLK_B), +}; + +/* The clock dividers in the table vary based on DT and register settings */ +static void __init r7s9210_update_clk_table(struct clk *extal_clk, + void __iomem *base) +{ + int i; + u16 frqcr; + u8 index; + + /* If EXTAL is above 12MHz, then we know it is Mode 1 */ + if (clk_get_rate(extal_clk) > 12000000) + cpg_mode = 1; + + frqcr = readl(base + CPG_FRQCR) & 0xFFF; + if (frqcr == 0x012) + index = 0; + else if (frqcr == 0x112) + index = 1; + else if (frqcr == 0x212) + index = 2; + else if (frqcr == 0x322) + index = 3; + else if (frqcr == 0x333) + index = 4; + else + BUG_ON(1); /* Illegal FRQCR value */ + + for (i = 0; i < ARRAY_SIZE(r7s9210_core_clks); i++) { + switch (r7s9210_core_clks[i].id) { + case R7S9210_CLK_I: + r7s9210_core_clks[i].div = ratio_tab[index].i; + break; + case R7S9210_CLK_G: + r7s9210_core_clks[i].div = ratio_tab[index].g; + break; + case R7S9210_CLK_B: + r7s9210_core_clks[i].div = ratio_tab[index].b; + break; + case R7S9210_CLK_P1: + case R7S9210_CLK_P1C: + r7s9210_core_clks[i].div = ratio_tab[index].p1; + break; + case R7S9210_CLK_P0: + r7s9210_core_clks[i].div = 32; + break; + } + } +} + +static struct clk * __init rza2_cpg_clk_register(struct device *dev, + const struct cpg_core_clk *core, const struct cpg_mssr_info *info, + struct clk **clks, void __iomem *base, + struct raw_notifier_head *notifiers) +{ + struct clk *parent; + unsigned int mult = 1; + unsigned int div = 1; + + parent = clks[core->parent]; + if (IS_ERR(parent)) + return ERR_CAST(parent); + + switch (core->id) { + case CLK_MAIN: + break; + + case CLK_PLL: + if (cpg_mode) + mult = 44; /* Divider 1 is 1/2 */ + else + mult = 88; /* Divider 1 is 1 */ + break; + + default: + return ERR_PTR(-EINVAL); + } + + if (core->id == CLK_MAIN) + r7s9210_update_clk_table(parent, base); + + return clk_register_fixed_factor(NULL, core->name, + __clk_get_name(parent), 0, mult, div); +} + +const struct cpg_mssr_info r7s9210_cpg_mssr_info __initconst = { + /* Early Clocks */ + .early_core_clks = r7s9210_early_core_clks, + .num_early_core_clks = ARRAY_SIZE(r7s9210_early_core_clks), + .early_mod_clks = r7s9210_early_mod_clks, + .num_early_mod_clks = ARRAY_SIZE(r7s9210_early_mod_clks), + + /* Core Clocks */ + .core_clks = r7s9210_core_clks, + .num_core_clks = ARRAY_SIZE(r7s9210_core_clks), + .last_dt_core_clk = LAST_DT_CORE_CLK, + .num_total_core_clks = MOD_CLK_BASE, + + /* Module Clocks */ + .mod_clks = r7s9210_mod_clks, + .num_mod_clks = ARRAY_SIZE(r7s9210_mod_clks), + .num_hw_mod_clks = 11 * 32, /* includes STBCR0 which doesn't exist */ + + /* Callbacks */ + .cpg_clk_register = rza2_cpg_clk_register, + + /* RZ/A2 has Standby Control Registers */ + .reg_layout = CLK_REG_LAYOUT_RZ_A, +}; + +static void __init r7s9210_cpg_mssr_early_init(struct device_node *np) +{ + cpg_mssr_early_init(np, &r7s9210_cpg_mssr_info); +} + +CLK_OF_DECLARE_DRIVER(cpg_mstp_clks, "renesas,r7s9210-cpg-mssr", + r7s9210_cpg_mssr_early_init); -- cgit v1.2.3