From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/samsung/clk-s5pv210-audss.c | 209 ++++++++++++++++++++++++++++++++ 1 file changed, 209 insertions(+) create mode 100644 drivers/clk/samsung/clk-s5pv210-audss.c (limited to 'drivers/clk/samsung/clk-s5pv210-audss.c') diff --git a/drivers/clk/samsung/clk-s5pv210-audss.c b/drivers/clk/samsung/clk-s5pv210-audss.c new file mode 100644 index 000000000..b31c00ea3 --- /dev/null +++ b/drivers/clk/samsung/clk-s5pv210-audss.c @@ -0,0 +1,209 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (c) 2014 Tomasz Figa + * + * Based on Exynos Audio Subsystem Clock Controller driver: + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * Author: Padmavathi Venna + * + * Driver for Audio Subsystem Clock Controller of S5PV210-compatible SoCs. +*/ + +#include +#include +#include +#include +#include +#include +#include + +#include + +static DEFINE_SPINLOCK(lock); +static void __iomem *reg_base; +static struct clk_hw_onecell_data *clk_data; + +#define ASS_CLK_SRC 0x0 +#define ASS_CLK_DIV 0x4 +#define ASS_CLK_GATE 0x8 + +#ifdef CONFIG_PM_SLEEP +static unsigned long reg_save[][2] = { + {ASS_CLK_SRC, 0}, + {ASS_CLK_DIV, 0}, + {ASS_CLK_GATE, 0}, +}; + +static int s5pv210_audss_clk_suspend(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + reg_save[i][1] = readl(reg_base + reg_save[i][0]); + + return 0; +} + +static void s5pv210_audss_clk_resume(void) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(reg_save); i++) + writel(reg_save[i][1], reg_base + reg_save[i][0]); +} + +static struct syscore_ops s5pv210_audss_clk_syscore_ops = { + .suspend = s5pv210_audss_clk_suspend, + .resume = s5pv210_audss_clk_resume, +}; +#endif /* CONFIG_PM_SLEEP */ + +/* register s5pv210_audss clocks */ +static int s5pv210_audss_clk_probe(struct platform_device *pdev) +{ + int i, ret = 0; + const char *mout_audss_p[2]; + const char *mout_i2s_p[3]; + const char *hclk_p; + struct clk_hw **clk_table; + struct clk *hclk, *pll_ref, *pll_in, *cdclk, *sclk_audio; + + reg_base = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(reg_base)) + return PTR_ERR(reg_base); + + clk_data = devm_kzalloc(&pdev->dev, + struct_size(clk_data, hws, AUDSS_MAX_CLKS), + GFP_KERNEL); + + if (!clk_data) + return -ENOMEM; + + clk_data->num = AUDSS_MAX_CLKS; + clk_table = clk_data->hws; + + hclk = devm_clk_get(&pdev->dev, "hclk"); + if (IS_ERR(hclk)) { + dev_err(&pdev->dev, "failed to get hclk clock\n"); + return PTR_ERR(hclk); + } + + pll_in = devm_clk_get(&pdev->dev, "fout_epll"); + if (IS_ERR(pll_in)) { + dev_err(&pdev->dev, "failed to get fout_epll clock\n"); + return PTR_ERR(pll_in); + } + + sclk_audio = devm_clk_get(&pdev->dev, "sclk_audio0"); + if (IS_ERR(sclk_audio)) { + dev_err(&pdev->dev, "failed to get sclk_audio0 clock\n"); + return PTR_ERR(sclk_audio); + } + + /* iiscdclk0 is an optional external I2S codec clock */ + cdclk = devm_clk_get(&pdev->dev, "iiscdclk0"); + pll_ref = devm_clk_get(&pdev->dev, "xxti"); + + if (!IS_ERR(pll_ref)) + mout_audss_p[0] = __clk_get_name(pll_ref); + else + mout_audss_p[0] = "xxti"; + mout_audss_p[1] = __clk_get_name(pll_in); + clk_table[CLK_MOUT_AUDSS] = clk_hw_register_mux(NULL, "mout_audss", + mout_audss_p, ARRAY_SIZE(mout_audss_p), + CLK_SET_RATE_NO_REPARENT, + reg_base + ASS_CLK_SRC, 0, 1, 0, &lock); + + mout_i2s_p[0] = "mout_audss"; + if (!IS_ERR(cdclk)) + mout_i2s_p[1] = __clk_get_name(cdclk); + else + mout_i2s_p[1] = "iiscdclk0"; + mout_i2s_p[2] = __clk_get_name(sclk_audio); + clk_table[CLK_MOUT_I2S_A] = clk_hw_register_mux(NULL, "mout_i2s_audss", + mout_i2s_p, ARRAY_SIZE(mout_i2s_p), + CLK_SET_RATE_NO_REPARENT, + reg_base + ASS_CLK_SRC, 2, 2, 0, &lock); + + clk_table[CLK_DOUT_AUD_BUS] = clk_hw_register_divider(NULL, + "dout_aud_bus", "mout_audss", 0, + reg_base + ASS_CLK_DIV, 0, 4, 0, &lock); + clk_table[CLK_DOUT_I2S_A] = clk_hw_register_divider(NULL, + "dout_i2s_audss", "mout_i2s_audss", 0, + reg_base + ASS_CLK_DIV, 4, 4, 0, &lock); + + clk_table[CLK_I2S] = clk_hw_register_gate(NULL, "i2s_audss", + "dout_i2s_audss", CLK_SET_RATE_PARENT, + reg_base + ASS_CLK_GATE, 6, 0, &lock); + + hclk_p = __clk_get_name(hclk); + + clk_table[CLK_HCLK_I2S] = clk_hw_register_gate(NULL, "hclk_i2s_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 5, 0, &lock); + clk_table[CLK_HCLK_UART] = clk_hw_register_gate(NULL, "hclk_uart_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 4, 0, &lock); + clk_table[CLK_HCLK_HWA] = clk_hw_register_gate(NULL, "hclk_hwa_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 3, 0, &lock); + clk_table[CLK_HCLK_DMA] = clk_hw_register_gate(NULL, "hclk_dma_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 2, 0, &lock); + clk_table[CLK_HCLK_BUF] = clk_hw_register_gate(NULL, "hclk_buf_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 1, 0, &lock); + clk_table[CLK_HCLK_RP] = clk_hw_register_gate(NULL, "hclk_rp_audss", + hclk_p, CLK_IGNORE_UNUSED, + reg_base + ASS_CLK_GATE, 0, 0, &lock); + + for (i = 0; i < clk_data->num; i++) { + if (IS_ERR(clk_table[i])) { + dev_err(&pdev->dev, "failed to register clock %d\n", i); + ret = PTR_ERR(clk_table[i]); + goto unregister; + } + } + + ret = of_clk_add_hw_provider(pdev->dev.of_node, of_clk_hw_onecell_get, + clk_data); + if (ret) { + dev_err(&pdev->dev, "failed to add clock provider\n"); + goto unregister; + } + +#ifdef CONFIG_PM_SLEEP + register_syscore_ops(&s5pv210_audss_clk_syscore_ops); +#endif + + return 0; + +unregister: + for (i = 0; i < clk_data->num; i++) { + if (!IS_ERR(clk_table[i])) + clk_hw_unregister(clk_table[i]); + } + + return ret; +} + +static const struct of_device_id s5pv210_audss_clk_of_match[] = { + { .compatible = "samsung,s5pv210-audss-clock", }, + {}, +}; + +static struct platform_driver s5pv210_audss_clk_driver = { + .driver = { + .name = "s5pv210-audss-clk", + .suppress_bind_attrs = true, + .of_match_table = s5pv210_audss_clk_of_match, + }, + .probe = s5pv210_audss_clk_probe, +}; + +static int __init s5pv210_audss_clk_init(void) +{ + return platform_driver_register(&s5pv210_audss_clk_driver); +} +core_initcall(s5pv210_audss_clk_init); -- cgit v1.2.3