From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/st/clk-flexgen.c | 748 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 748 insertions(+) create mode 100644 drivers/clk/st/clk-flexgen.c (limited to 'drivers/clk/st/clk-flexgen.c') diff --git a/drivers/clk/st/clk-flexgen.c b/drivers/clk/st/clk-flexgen.c new file mode 100644 index 000000000..7ae4f6561 --- /dev/null +++ b/drivers/clk/st/clk-flexgen.c @@ -0,0 +1,748 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * clk-flexgen.c + * + * Copyright (C) ST-Microelectronics SA 2013 + * Author: Maxime Coquelin for ST-Microelectronics. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct clkgen_clk_out { + const char *name; + unsigned long flags; +}; + +struct clkgen_data { + unsigned long flags; + bool mode; + const struct clkgen_clk_out *outputs; + const unsigned int outputs_nb; +}; + +struct flexgen { + struct clk_hw hw; + + /* Crossbar */ + struct clk_mux mux; + /* Pre-divisor's gate */ + struct clk_gate pgate; + /* Pre-divisor */ + struct clk_divider pdiv; + /* Final divisor's gate */ + struct clk_gate fgate; + /* Final divisor */ + struct clk_divider fdiv; + /* Asynchronous mode control */ + struct clk_gate sync; + /* hw control flags */ + bool control_mode; +}; + +#define to_flexgen(_hw) container_of(_hw, struct flexgen, hw) +#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw) + +static int flexgen_enable(struct clk_hw *hw) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *pgate_hw = &flexgen->pgate.hw; + struct clk_hw *fgate_hw = &flexgen->fgate.hw; + + __clk_hw_set_clk(pgate_hw, hw); + __clk_hw_set_clk(fgate_hw, hw); + + clk_gate_ops.enable(pgate_hw); + + clk_gate_ops.enable(fgate_hw); + + pr_debug("%s: flexgen output enabled\n", clk_hw_get_name(hw)); + return 0; +} + +static void flexgen_disable(struct clk_hw *hw) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *fgate_hw = &flexgen->fgate.hw; + + /* disable only the final gate */ + __clk_hw_set_clk(fgate_hw, hw); + + clk_gate_ops.disable(fgate_hw); + + pr_debug("%s: flexgen output disabled\n", clk_hw_get_name(hw)); +} + +static int flexgen_is_enabled(struct clk_hw *hw) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *fgate_hw = &flexgen->fgate.hw; + + __clk_hw_set_clk(fgate_hw, hw); + + if (!clk_gate_ops.is_enabled(fgate_hw)) + return 0; + + return 1; +} + +static u8 flexgen_get_parent(struct clk_hw *hw) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *mux_hw = &flexgen->mux.hw; + + __clk_hw_set_clk(mux_hw, hw); + + return clk_mux_ops.get_parent(mux_hw); +} + +static int flexgen_set_parent(struct clk_hw *hw, u8 index) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *mux_hw = &flexgen->mux.hw; + + __clk_hw_set_clk(mux_hw, hw); + + return clk_mux_ops.set_parent(mux_hw, index); +} + +static inline unsigned long +clk_best_div(unsigned long parent_rate, unsigned long rate) +{ + return parent_rate / rate + ((rate > (2*(parent_rate % rate))) ? 0 : 1); +} + +static long flexgen_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + unsigned long div; + + /* Round div according to exact prate and wished rate */ + div = clk_best_div(*prate, rate); + + if (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) { + *prate = rate * div; + return rate; + } + + return *prate / div; +} + +static unsigned long flexgen_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *pdiv_hw = &flexgen->pdiv.hw; + struct clk_hw *fdiv_hw = &flexgen->fdiv.hw; + unsigned long mid_rate; + + __clk_hw_set_clk(pdiv_hw, hw); + __clk_hw_set_clk(fdiv_hw, hw); + + mid_rate = clk_divider_ops.recalc_rate(pdiv_hw, parent_rate); + + return clk_divider_ops.recalc_rate(fdiv_hw, mid_rate); +} + +static int flexgen_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct flexgen *flexgen = to_flexgen(hw); + struct clk_hw *pdiv_hw = &flexgen->pdiv.hw; + struct clk_hw *fdiv_hw = &flexgen->fdiv.hw; + struct clk_hw *sync_hw = &flexgen->sync.hw; + struct clk_gate *config = to_clk_gate(sync_hw); + unsigned long div = 0; + int ret = 0; + u32 reg; + + __clk_hw_set_clk(pdiv_hw, hw); + __clk_hw_set_clk(fdiv_hw, hw); + + if (flexgen->control_mode) { + reg = readl(config->reg); + reg &= ~BIT(config->bit_idx); + writel(reg, config->reg); + } + + div = clk_best_div(parent_rate, rate); + + /* + * pdiv is mainly targeted for low freq results, while fdiv + * should be used for div <= 64. The other way round can + * lead to 'duty cycle' issues. + */ + + if (div <= 64) { + clk_divider_ops.set_rate(pdiv_hw, parent_rate, parent_rate); + ret = clk_divider_ops.set_rate(fdiv_hw, rate, rate * div); + } else { + clk_divider_ops.set_rate(fdiv_hw, parent_rate, parent_rate); + ret = clk_divider_ops.set_rate(pdiv_hw, rate, rate * div); + } + + return ret; +} + +static const struct clk_ops flexgen_ops = { + .enable = flexgen_enable, + .disable = flexgen_disable, + .is_enabled = flexgen_is_enabled, + .get_parent = flexgen_get_parent, + .set_parent = flexgen_set_parent, + .round_rate = flexgen_round_rate, + .recalc_rate = flexgen_recalc_rate, + .set_rate = flexgen_set_rate, +}; + +static struct clk *clk_register_flexgen(const char *name, + const char **parent_names, u8 num_parents, + void __iomem *reg, spinlock_t *lock, u32 idx, + unsigned long flexgen_flags, bool mode) { + struct flexgen *fgxbar; + struct clk *clk; + struct clk_init_data init; + u32 xbar_shift; + void __iomem *xbar_reg, *fdiv_reg; + + fgxbar = kzalloc(sizeof(struct flexgen), GFP_KERNEL); + if (!fgxbar) + return ERR_PTR(-ENOMEM); + + init.name = name; + init.ops = &flexgen_ops; + init.flags = CLK_GET_RATE_NOCACHE | flexgen_flags; + init.parent_names = parent_names; + init.num_parents = num_parents; + + xbar_reg = reg + 0x18 + (idx & ~0x3); + xbar_shift = (idx % 4) * 0x8; + fdiv_reg = reg + 0x164 + idx * 4; + + /* Crossbar element config */ + fgxbar->mux.lock = lock; + fgxbar->mux.mask = BIT(6) - 1; + fgxbar->mux.reg = xbar_reg; + fgxbar->mux.shift = xbar_shift; + fgxbar->mux.table = NULL; + + + /* Pre-divider's gate config (in xbar register)*/ + fgxbar->pgate.lock = lock; + fgxbar->pgate.reg = xbar_reg; + fgxbar->pgate.bit_idx = xbar_shift + 6; + + /* Pre-divider config */ + fgxbar->pdiv.lock = lock; + fgxbar->pdiv.reg = reg + 0x58 + idx * 4; + fgxbar->pdiv.width = 10; + + /* Final divider's gate config */ + fgxbar->fgate.lock = lock; + fgxbar->fgate.reg = fdiv_reg; + fgxbar->fgate.bit_idx = 6; + + /* Final divider config */ + fgxbar->fdiv.lock = lock; + fgxbar->fdiv.reg = fdiv_reg; + fgxbar->fdiv.width = 6; + + /* Final divider sync config */ + fgxbar->sync.lock = lock; + fgxbar->sync.reg = fdiv_reg; + fgxbar->sync.bit_idx = 7; + + fgxbar->control_mode = mode; + + fgxbar->hw.init = &init; + + clk = clk_register(NULL, &fgxbar->hw); + if (IS_ERR(clk)) + kfree(fgxbar); + else + pr_debug("%s: parent %s rate %u\n", + __clk_get_name(clk), + __clk_get_name(clk_get_parent(clk)), + (unsigned int)clk_get_rate(clk)); + return clk; +} + +static const char ** __init flexgen_get_parents(struct device_node *np, + int *num_parents) +{ + const char **parents; + unsigned int nparents; + + nparents = of_clk_get_parent_count(np); + if (WARN_ON(!nparents)) + return NULL; + + parents = kcalloc(nparents, sizeof(const char *), GFP_KERNEL); + if (!parents) + return NULL; + + *num_parents = of_clk_parent_fill(np, parents, nparents); + + return parents; +} + +static const struct clkgen_data clkgen_audio = { + .flags = CLK_SET_RATE_PARENT, +}; + +static const struct clkgen_data clkgen_video = { + .flags = CLK_SET_RATE_PARENT, + .mode = 1, +}; + +static const struct clkgen_clk_out clkgen_stih407_a0_clk_out[] = { + /* This clk needs to be on so that memory interface is accessible */ + { .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL }, +}; + +static const struct clkgen_data clkgen_stih407_a0 = { + .outputs = clkgen_stih407_a0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih407_a0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih410_a0_clk_out[] = { + /* Those clks need to be on so that memory interface is accessible */ + { .name = "clk-ic-lmi0", .flags = CLK_IS_CRITICAL }, + { .name = "clk-ic-lmi1", .flags = CLK_IS_CRITICAL }, +}; + +static const struct clkgen_data clkgen_stih410_a0 = { + .outputs = clkgen_stih410_a0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih410_a0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih407_c0_clk_out[] = { + { .name = "clk-icn-gpu", }, + { .name = "clk-fdma", }, + { .name = "clk-nand", }, + { .name = "clk-hva", }, + { .name = "clk-proc-stfe", }, + { .name = "clk-proc-tp", }, + { .name = "clk-rx-icn-dmu", }, + { .name = "clk-rx-icn-hva", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL }, + { .name = "clk-mmc-0", }, + { .name = "clk-mmc-1", }, + { .name = "clk-jpegdec", }, + /* This clk needs to be on to keep A9 running */ + { .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL }, + { .name = "clk-ic-bdisp-0", }, + { .name = "clk-ic-bdisp-1", }, + { .name = "clk-pp-dmu", }, + { .name = "clk-vid-dmu", }, + { .name = "clk-dss-lpc", }, + { .name = "clk-st231-aud-0", }, + { .name = "clk-st231-gp-1", }, + { .name = "clk-st231-dmu", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL }, + { .name = "clk-tx-icn-disp-1", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL }, + { .name = "clk-stfe-frc2", }, + { .name = "clk-eth-phy", }, + { .name = "clk-eth-ref-phyclk", }, + { .name = "clk-flash-promip", }, + { .name = "clk-main-disp", }, + { .name = "clk-aux-disp", }, + { .name = "clk-compo-dvp", }, +}; + +static const struct clkgen_data clkgen_stih407_c0 = { + .outputs = clkgen_stih407_c0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih407_c0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih410_c0_clk_out[] = { + { .name = "clk-icn-gpu", }, + { .name = "clk-fdma", }, + { .name = "clk-nand", }, + { .name = "clk-hva", }, + { .name = "clk-proc-stfe", }, + { .name = "clk-proc-tp", }, + { .name = "clk-rx-icn-dmu", }, + { .name = "clk-rx-icn-hva", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL }, + { .name = "clk-mmc-0", }, + { .name = "clk-mmc-1", }, + { .name = "clk-jpegdec", }, + /* This clk needs to be on to keep A9 running */ + { .name = "clk-ext2fa9", .flags = CLK_IS_CRITICAL }, + { .name = "clk-ic-bdisp-0", }, + { .name = "clk-ic-bdisp-1", }, + { .name = "clk-pp-dmu", }, + { .name = "clk-vid-dmu", }, + { .name = "clk-dss-lpc", }, + { .name = "clk-st231-aud-0", }, + { .name = "clk-st231-gp-1", }, + { .name = "clk-st231-dmu", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL }, + { .name = "clk-tx-icn-disp-1", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL }, + { .name = "clk-stfe-frc2", }, + { .name = "clk-eth-phy", }, + { .name = "clk-eth-ref-phyclk", }, + { .name = "clk-flash-promip", }, + { .name = "clk-main-disp", }, + { .name = "clk-aux-disp", }, + { .name = "clk-compo-dvp", }, + { .name = "clk-tx-icn-hades", }, + { .name = "clk-rx-icn-hades", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL }, + { .name = "clk-pp-hades", }, + { .name = "clk-clust-hades", }, + { .name = "clk-hwpe-hades", }, + { .name = "clk-fc-hades", }, +}; + +static const struct clkgen_data clkgen_stih410_c0 = { + .outputs = clkgen_stih410_c0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih410_c0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih418_c0_clk_out[] = { + { .name = "clk-icn-gpu", }, + { .name = "clk-fdma", }, + { .name = "clk-nand", }, + { .name = "clk-hva", }, + { .name = "clk-proc-stfe", }, + { .name = "clk-tp", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-rx-icn-dmu", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-rx-icn-hva", .flags = CLK_IS_CRITICAL }, + { .name = "clk-icn-cpu", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-tx-icn-dmu", .flags = CLK_IS_CRITICAL }, + { .name = "clk-mmc-0", }, + { .name = "clk-mmc-1", }, + { .name = "clk-jpegdec", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-reg", .flags = CLK_IS_CRITICAL }, + { .name = "clk-proc-bdisp-0", }, + { .name = "clk-proc-bdisp-1", }, + { .name = "clk-pp-dmu", }, + { .name = "clk-vid-dmu", }, + { .name = "clk-dss-lpc", }, + { .name = "clk-st231-aud-0", }, + { .name = "clk-st231-gp-1", }, + { .name = "clk-st231-dmu", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-lmi", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-tx-icn-1", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-sbc", .flags = CLK_IS_CRITICAL }, + { .name = "clk-stfe-frc2", }, + { .name = "clk-eth-phyref", }, + { .name = "clk-eth-ref-phyclk", }, + { .name = "clk-flash-promip", }, + { .name = "clk-main-disp", }, + { .name = "clk-aux-disp", }, + { .name = "clk-compo-dvp", }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-tx-icn-hades", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-rx-icn-hades", .flags = CLK_IS_CRITICAL }, + /* This clk needs to be on to keep bus interconnect alive */ + { .name = "clk-icn-reg-16", .flags = CLK_IS_CRITICAL }, + { .name = "clk-pp-hevc", }, + { .name = "clk-clust-hevc", }, + { .name = "clk-hwpe-hevc", }, + { .name = "clk-fc-hevc", }, + { .name = "clk-proc-mixer", }, + { .name = "clk-proc-sc", }, + { .name = "clk-avsp-hevc", }, +}; + +static const struct clkgen_data clkgen_stih418_c0 = { + .outputs = clkgen_stih418_c0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih418_c0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih407_d0_clk_out[] = { + { .name = "clk-pcm-0", }, + { .name = "clk-pcm-1", }, + { .name = "clk-pcm-2", }, + { .name = "clk-spdiff", }, +}; + +static const struct clkgen_data clkgen_stih407_d0 = { + .flags = CLK_SET_RATE_PARENT, + .outputs = clkgen_stih407_d0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih407_d0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih410_d0_clk_out[] = { + { .name = "clk-pcm-0", }, + { .name = "clk-pcm-1", }, + { .name = "clk-pcm-2", }, + { .name = "clk-spdiff", }, + { .name = "clk-pcmr10-master", }, + { .name = "clk-usb2-phy", }, +}; + +static const struct clkgen_data clkgen_stih410_d0 = { + .flags = CLK_SET_RATE_PARENT, + .outputs = clkgen_stih410_d0_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih410_d0_clk_out), +}; + +static const struct clkgen_clk_out clkgen_stih407_d2_clk_out[] = { + { .name = "clk-pix-main-disp", }, + { .name = "clk-pix-pip", }, + { .name = "clk-pix-gdp1", }, + { .name = "clk-pix-gdp2", }, + { .name = "clk-pix-gdp3", }, + { .name = "clk-pix-gdp4", }, + { .name = "clk-pix-aux-disp", }, + { .name = "clk-denc", }, + { .name = "clk-pix-hddac", }, + { .name = "clk-hddac", }, + { .name = "clk-sddac", }, + { .name = "clk-pix-dvo", }, + { .name = "clk-dvo", }, + { .name = "clk-pix-hdmi", }, + { .name = "clk-tmds-hdmi", }, + { .name = "clk-ref-hdmiphy", }, +}; + +static const struct clkgen_data clkgen_stih407_d2 = { + .outputs = clkgen_stih407_d2_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih407_d2_clk_out), + .flags = CLK_SET_RATE_PARENT, + .mode = 1, +}; + +static const struct clkgen_clk_out clkgen_stih418_d2_clk_out[] = { + { .name = "clk-pix-main-disp", }, + { .name = "", }, + { .name = "", }, + { .name = "", }, + { .name = "", }, + { .name = "clk-tmds-hdmi-div2", }, + { .name = "clk-pix-aux-disp", }, + { .name = "clk-denc", }, + { .name = "clk-pix-hddac", }, + { .name = "clk-hddac", }, + { .name = "clk-sddac", }, + { .name = "clk-pix-dvo", }, + { .name = "clk-dvo", }, + { .name = "clk-pix-hdmi", }, + { .name = "clk-tmds-hdmi", }, + { .name = "clk-ref-hdmiphy", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "", }, { .name = "", }, { .name = "", }, + { .name = "clk-vp9", }, +}; + +static const struct clkgen_data clkgen_stih418_d2 = { + .outputs = clkgen_stih418_d2_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih418_d2_clk_out), + .flags = CLK_SET_RATE_PARENT, + .mode = 1, +}; + +static const struct clkgen_clk_out clkgen_stih407_d3_clk_out[] = { + { .name = "clk-stfe-frc1", }, + { .name = "clk-tsout-0", }, + { .name = "clk-tsout-1", }, + { .name = "clk-mchi", }, + { .name = "clk-vsens-compo", }, + { .name = "clk-frc1-remote", }, + { .name = "clk-lpc-0", }, + { .name = "clk-lpc-1", }, +}; + +static const struct clkgen_data clkgen_stih407_d3 = { + .outputs = clkgen_stih407_d3_clk_out, + .outputs_nb = ARRAY_SIZE(clkgen_stih407_d3_clk_out), +}; + +static const struct of_device_id flexgen_of_match[] = { + { + .compatible = "st,flexgen-audio", + .data = &clkgen_audio, + }, + { + .compatible = "st,flexgen-video", + .data = &clkgen_video, + }, + { + .compatible = "st,flexgen-stih407-a0", + .data = &clkgen_stih407_a0, + }, + { + .compatible = "st,flexgen-stih410-a0", + .data = &clkgen_stih410_a0, + }, + { + .compatible = "st,flexgen-stih407-c0", + .data = &clkgen_stih407_c0, + }, + { + .compatible = "st,flexgen-stih410-c0", + .data = &clkgen_stih410_c0, + }, + { + .compatible = "st,flexgen-stih418-c0", + .data = &clkgen_stih418_c0, + }, + { + .compatible = "st,flexgen-stih407-d0", + .data = &clkgen_stih407_d0, + }, + { + .compatible = "st,flexgen-stih410-d0", + .data = &clkgen_stih410_d0, + }, + { + .compatible = "st,flexgen-stih407-d2", + .data = &clkgen_stih407_d2, + }, + { + .compatible = "st,flexgen-stih418-d2", + .data = &clkgen_stih418_d2, + }, + { + .compatible = "st,flexgen-stih407-d3", + .data = &clkgen_stih407_d3, + }, + {} +}; + +static void __init st_of_flexgen_setup(struct device_node *np) +{ + struct device_node *pnode; + void __iomem *reg; + struct clk_onecell_data *clk_data; + const char **parents; + int num_parents, i; + spinlock_t *rlock = NULL; + const struct of_device_id *match; + struct clkgen_data *data = NULL; + unsigned long flex_flags = 0; + int ret; + bool clk_mode = 0; + const char *clk_name; + + pnode = of_get_parent(np); + if (!pnode) + return; + + reg = of_iomap(pnode, 0); + of_node_put(pnode); + if (!reg) + return; + + parents = flexgen_get_parents(np, &num_parents); + if (!parents) { + iounmap(reg); + return; + } + + match = of_match_node(flexgen_of_match, np); + if (match) { + data = (struct clkgen_data *)match->data; + flex_flags = data->flags; + clk_mode = data->mode; + } + + clk_data = kzalloc(sizeof(*clk_data), GFP_KERNEL); + if (!clk_data) + goto err; + + /* First try to get output information from the compatible data */ + if (!data || !data->outputs_nb || !data->outputs) { + ret = of_property_count_strings(np, "clock-output-names"); + if (ret <= 0) { + pr_err("%s: Failed to get number of output clocks (%d)", + __func__, clk_data->clk_num); + goto err; + } + clk_data->clk_num = ret; + } else + clk_data->clk_num = data->outputs_nb; + + clk_data->clks = kcalloc(clk_data->clk_num, sizeof(struct clk *), + GFP_KERNEL); + if (!clk_data->clks) + goto err; + + rlock = kzalloc(sizeof(spinlock_t), GFP_KERNEL); + if (!rlock) + goto err; + + spin_lock_init(rlock); + + for (i = 0; i < clk_data->clk_num; i++) { + struct clk *clk; + + if (!data || !data->outputs_nb || !data->outputs) { + if (of_property_read_string_index(np, + "clock-output-names", + i, &clk_name)) + break; + flex_flags &= ~CLK_IS_CRITICAL; + of_clk_detect_critical(np, i, &flex_flags); + } else { + clk_name = data->outputs[i].name; + flex_flags = data->flags | data->outputs[i].flags; + } + + /* + * If we read an empty clock name then the output is unused + */ + if (*clk_name == '\0') + continue; + + clk = clk_register_flexgen(clk_name, parents, num_parents, + reg, rlock, i, flex_flags, clk_mode); + + if (IS_ERR(clk)) + goto err; + + clk_data->clks[i] = clk; + } + + kfree(parents); + of_clk_add_provider(np, of_clk_src_onecell_get, clk_data); + + return; + +err: + iounmap(reg); + if (clk_data) + kfree(clk_data->clks); + kfree(clk_data); + kfree(parents); + kfree(rlock); +} +CLK_OF_DECLARE(flexgen, "st,flexgen", st_of_flexgen_setup); -- cgit v1.2.3