From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/sunxi/clk-sunxi.c | 1167 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 1167 insertions(+) create mode 100644 drivers/clk/sunxi/clk-sunxi.c (limited to 'drivers/clk/sunxi/clk-sunxi.c') diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c new file mode 100644 index 000000000..5fe7049ea --- /dev/null +++ b/drivers/clk/sunxi/clk-sunxi.c @@ -0,0 +1,1167 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2013 Emilio López + * + * Emilio López + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clk-factors.h" + +static DEFINE_SPINLOCK(clk_lock); + +/* Maximum number of parents our clocks have */ +#define SUNXI_MAX_PARENTS 5 + +/* + * sun4i_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * n * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sun4i_get_pll1_factors(struct factors_request *req) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = req->rate / 6000000; + req->rate = 6000000 * div; + + /* m is always zero for pll1 */ + req->m = 0; + + /* k is 1 only on these cases */ + if (req->rate >= 768000000 || req->rate == 42000000 || + req->rate == 54000000) + req->k = 1; + else + req->k = 0; + + /* p will be 3 for divs under 10 */ + if (div < 10) + req->p = 3; + + /* p will be 2 for divs between 10 - 20 and odd divs under 32 */ + else if (div < 20 || (div < 32 && (div & 1))) + req->p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + req->p = 1; + + /* any other entries have p = 0 */ + else + req->p = 0; + + /* calculate a suitable n based on k and p */ + div <<= req->p; + div /= (req->k + 1); + req->n = div / 4; +} + +/* + * sun6i_a31_get_pll1_factors() - calculates n, k and m factors for PLL1 + * PLL1 rate is calculated as follows + * rate = parent_rate * (n + 1) * (k + 1) / (m + 1); + * parent_rate should always be 24MHz + */ +static void sun6i_a31_get_pll1_factors(struct factors_request *req) +{ + /* + * We can operate only on MHz, this will make our life easier + * later. + */ + u32 freq_mhz = req->rate / 1000000; + u32 parent_freq_mhz = req->parent_rate / 1000000; + + /* + * Round down the frequency to the closest multiple of either + * 6 or 16 + */ + u32 round_freq_6 = rounddown(freq_mhz, 6); + u32 round_freq_16 = round_down(freq_mhz, 16); + + if (round_freq_6 > round_freq_16) + freq_mhz = round_freq_6; + else + freq_mhz = round_freq_16; + + req->rate = freq_mhz * 1000000; + + /* If the frequency is a multiple of 32 MHz, k is always 3 */ + if (!(freq_mhz % 32)) + req->k = 3; + /* If the frequency is a multiple of 9 MHz, k is always 2 */ + else if (!(freq_mhz % 9)) + req->k = 2; + /* If the frequency is a multiple of 8 MHz, k is always 1 */ + else if (!(freq_mhz % 8)) + req->k = 1; + /* Otherwise, we don't use the k factor */ + else + req->k = 0; + + /* + * If the frequency is a multiple of 2 but not a multiple of + * 3, m is 3. This is the first time we use 6 here, yet we + * will use it on several other places. + * We use this number because it's the lowest frequency we can + * generate (with n = 0, k = 0, m = 3), so every other frequency + * somehow relates to this frequency. + */ + if ((freq_mhz % 6) == 2 || (freq_mhz % 6) == 4) + req->m = 2; + /* + * If the frequency is a multiple of 6MHz, but the factor is + * odd, m will be 3 + */ + else if ((freq_mhz / 6) & 1) + req->m = 3; + /* Otherwise, we end up with m = 1 */ + else + req->m = 1; + + /* Calculate n thanks to the above factors we already got */ + req->n = freq_mhz * (req->m + 1) / ((req->k + 1) * parent_freq_mhz) + - 1; + + /* + * If n end up being outbound, and that we can still decrease + * m, do it. + */ + if ((req->n + 1) > 31 && (req->m + 1) > 1) { + req->n = (req->n + 1) / 2 - 1; + req->m = (req->m + 1) / 2 - 1; + } +} + +/* + * sun8i_a23_get_pll1_factors() - calculates n, k, m, p factors for PLL1 + * PLL1 rate is calculated as follows + * rate = (parent_rate * (n + 1) * (k + 1) >> p) / (m + 1); + * parent_rate is always 24Mhz + */ + +static void sun8i_a23_get_pll1_factors(struct factors_request *req) +{ + u8 div; + + /* Normalize value to a 6M multiple */ + div = req->rate / 6000000; + req->rate = 6000000 * div; + + /* m is always zero for pll1 */ + req->m = 0; + + /* k is 1 only on these cases */ + if (req->rate >= 768000000 || req->rate == 42000000 || + req->rate == 54000000) + req->k = 1; + else + req->k = 0; + + /* p will be 2 for divs under 20 and odd divs under 32 */ + if (div < 20 || (div < 32 && (div & 1))) + req->p = 2; + + /* p will be 1 for even divs under 32, divs under 40 and odd pairs + * of divs between 40-62 */ + else if (div < 40 || (div < 64 && (div & 2))) + req->p = 1; + + /* any other entries have p = 0 */ + else + req->p = 0; + + /* calculate a suitable n based on k and p */ + div <<= req->p; + div /= (req->k + 1); + req->n = div / 4 - 1; +} + +/* + * sun4i_get_pll5_factors() - calculates n, k factors for PLL5 + * PLL5 rate is calculated as follows + * rate = parent_rate * n * (k + 1) + * parent_rate is always 24Mhz + */ + +static void sun4i_get_pll5_factors(struct factors_request *req) +{ + u8 div; + + /* Normalize value to a parent_rate multiple (24M) */ + div = req->rate / req->parent_rate; + req->rate = req->parent_rate * div; + + if (div < 31) + req->k = 0; + else if (div / 2 < 31) + req->k = 1; + else if (div / 3 < 31) + req->k = 2; + else + req->k = 3; + + req->n = DIV_ROUND_UP(div, (req->k + 1)); +} + +/* + * sun6i_a31_get_pll6_factors() - calculates n, k factors for A31 PLL6x2 + * PLL6x2 rate is calculated as follows + * rate = parent_rate * (n + 1) * (k + 1) + * parent_rate is always 24Mhz + */ + +static void sun6i_a31_get_pll6_factors(struct factors_request *req) +{ + u8 div; + + /* Normalize value to a parent_rate multiple (24M) */ + div = req->rate / req->parent_rate; + req->rate = req->parent_rate * div; + + req->k = div / 32; + if (req->k > 3) + req->k = 3; + + req->n = DIV_ROUND_UP(div, (req->k + 1)) - 1; +} + +/* + * sun5i_a13_get_ahb_factors() - calculates m, p factors for AHB + * AHB rate is calculated as follows + * rate = parent_rate >> p + */ + +static void sun5i_a13_get_ahb_factors(struct factors_request *req) +{ + u32 div; + + /* divide only */ + if (req->parent_rate < req->rate) + req->rate = req->parent_rate; + + /* + * user manual says valid speed is 8k ~ 276M, but tests show it + * can work at speeds up to 300M, just after reparenting to pll6 + */ + if (req->rate < 8000) + req->rate = 8000; + if (req->rate > 300000000) + req->rate = 300000000; + + div = order_base_2(DIV_ROUND_UP(req->parent_rate, req->rate)); + + /* p = 0 ~ 3 */ + if (div > 3) + div = 3; + + req->rate = req->parent_rate >> div; + + req->p = div; +} + +#define SUN6I_AHB1_PARENT_PLL6 3 + +/* + * sun6i_a31_get_ahb_factors() - calculates m, p factors for AHB + * AHB rate is calculated as follows + * rate = parent_rate >> p + * + * if parent is pll6, then + * parent_rate = pll6 rate / (m + 1) + */ + +static void sun6i_get_ahb1_factors(struct factors_request *req) +{ + u8 div, calcp, calcm = 1; + + /* + * clock can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency + */ + if (req->parent_rate && req->rate > req->parent_rate) + req->rate = req->parent_rate; + + div = DIV_ROUND_UP(req->parent_rate, req->rate); + + /* calculate pre-divider if parent is pll6 */ + if (req->parent_index == SUN6I_AHB1_PARENT_PLL6) { + if (div < 4) + calcp = 0; + else if (div / 2 < 4) + calcp = 1; + else if (div / 4 < 4) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + } else { + calcp = __roundup_pow_of_two(div); + calcp = calcp > 3 ? 3 : calcp; + } + + req->rate = (req->parent_rate / calcm) >> calcp; + req->p = calcp; + req->m = calcm - 1; +} + +/* + * sun6i_ahb1_recalc() - calculates AHB clock rate from m, p factors and + * parent index + */ +static void sun6i_ahb1_recalc(struct factors_request *req) +{ + req->rate = req->parent_rate; + + /* apply pre-divider first if parent is pll6 */ + if (req->parent_index == SUN6I_AHB1_PARENT_PLL6) + req->rate /= req->m + 1; + + /* clk divider */ + req->rate >>= req->p; +} + +/* + * sun4i_get_apb1_factors() - calculates m, p factors for APB1 + * APB1 rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun4i_get_apb1_factors(struct factors_request *req) +{ + u8 calcm, calcp; + int div; + + if (req->parent_rate < req->rate) + req->rate = req->parent_rate; + + div = DIV_ROUND_UP(req->parent_rate, req->rate); + + /* Invalid rate! */ + if (div > 32) + return; + + if (div <= 4) + calcp = 0; + else if (div <= 8) + calcp = 1; + else if (div <= 16) + calcp = 2; + else + calcp = 3; + + calcm = (div >> calcp) - 1; + + req->rate = (req->parent_rate >> calcp) / (calcm + 1); + req->m = calcm; + req->p = calcp; +} + + + + +/* + * sun7i_a20_get_out_factors() - calculates m, p factors for CLK_OUT_A/B + * CLK_OUT rate is calculated as follows + * rate = (parent_rate >> p) / (m + 1); + */ + +static void sun7i_a20_get_out_factors(struct factors_request *req) +{ + u8 div, calcm, calcp; + + /* These clocks can only divide, so we will never be able to achieve + * frequencies higher than the parent frequency */ + if (req->rate > req->parent_rate) + req->rate = req->parent_rate; + + div = DIV_ROUND_UP(req->parent_rate, req->rate); + + if (div < 32) + calcp = 0; + else if (div / 2 < 32) + calcp = 1; + else if (div / 4 < 32) + calcp = 2; + else + calcp = 3; + + calcm = DIV_ROUND_UP(div, 1 << calcp); + + req->rate = (req->parent_rate >> calcp) / calcm; + req->m = calcm - 1; + req->p = calcp; +} + +/* + * sunxi_factors_clk_setup() - Setup function for factor clocks + */ + +static const struct clk_factors_config sun4i_pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, +}; + +static const struct clk_factors_config sun6i_a31_pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .n_start = 1, +}; + +static const struct clk_factors_config sun8i_a23_pll1_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .mshift = 0, + .mwidth = 2, + .pshift = 16, + .pwidth = 2, + .n_start = 1, +}; + +static const struct clk_factors_config sun4i_pll5_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, +}; + +static const struct clk_factors_config sun6i_a31_pll6_config = { + .nshift = 8, + .nwidth = 5, + .kshift = 4, + .kwidth = 2, + .n_start = 1, +}; + +static const struct clk_factors_config sun5i_a13_ahb_config = { + .pshift = 4, + .pwidth = 2, +}; + +static const struct clk_factors_config sun6i_ahb1_config = { + .mshift = 6, + .mwidth = 2, + .pshift = 4, + .pwidth = 2, +}; + +static const struct clk_factors_config sun4i_apb1_config = { + .mshift = 0, + .mwidth = 5, + .pshift = 16, + .pwidth = 2, +}; + +/* user manual says "n" but it's really "p" */ +static const struct clk_factors_config sun7i_a20_out_config = { + .mshift = 8, + .mwidth = 5, + .pshift = 20, + .pwidth = 2, +}; + +static const struct factors_data sun4i_pll1_data __initconst = { + .enable = 31, + .table = &sun4i_pll1_config, + .getter = sun4i_get_pll1_factors, +}; + +static const struct factors_data sun6i_a31_pll1_data __initconst = { + .enable = 31, + .table = &sun6i_a31_pll1_config, + .getter = sun6i_a31_get_pll1_factors, +}; + +static const struct factors_data sun8i_a23_pll1_data __initconst = { + .enable = 31, + .table = &sun8i_a23_pll1_config, + .getter = sun8i_a23_get_pll1_factors, +}; + +static const struct factors_data sun7i_a20_pll4_data __initconst = { + .enable = 31, + .table = &sun4i_pll5_config, + .getter = sun4i_get_pll5_factors, +}; + +static const struct factors_data sun4i_pll5_data __initconst = { + .enable = 31, + .table = &sun4i_pll5_config, + .getter = sun4i_get_pll5_factors, +}; + +static const struct factors_data sun6i_a31_pll6_data __initconst = { + .enable = 31, + .table = &sun6i_a31_pll6_config, + .getter = sun6i_a31_get_pll6_factors, +}; + +static const struct factors_data sun5i_a13_ahb_data __initconst = { + .mux = 6, + .muxmask = BIT(1) | BIT(0), + .table = &sun5i_a13_ahb_config, + .getter = sun5i_a13_get_ahb_factors, +}; + +static const struct factors_data sun6i_ahb1_data __initconst = { + .mux = 12, + .muxmask = BIT(1) | BIT(0), + .table = &sun6i_ahb1_config, + .getter = sun6i_get_ahb1_factors, + .recalc = sun6i_ahb1_recalc, +}; + +static const struct factors_data sun4i_apb1_data __initconst = { + .mux = 24, + .muxmask = BIT(1) | BIT(0), + .table = &sun4i_apb1_config, + .getter = sun4i_get_apb1_factors, +}; + +static const struct factors_data sun7i_a20_out_data __initconst = { + .enable = 31, + .mux = 24, + .muxmask = BIT(1) | BIT(0), + .table = &sun7i_a20_out_config, + .getter = sun7i_a20_get_out_factors, +}; + +static struct clk * __init sunxi_factors_clk_setup(struct device_node *node, + const struct factors_data *data) +{ + void __iomem *reg; + + reg = of_iomap(node, 0); + if (!reg) { + pr_err("Could not get registers for factors-clk: %pOFn\n", + node); + return NULL; + } + + return sunxi_factors_register(node, data, &clk_lock, reg); +} + +static void __init sun4i_pll1_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun4i_pll1_data); +} +CLK_OF_DECLARE(sun4i_pll1, "allwinner,sun4i-a10-pll1-clk", + sun4i_pll1_clk_setup); + +static void __init sun6i_pll1_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun6i_a31_pll1_data); +} +CLK_OF_DECLARE(sun6i_pll1, "allwinner,sun6i-a31-pll1-clk", + sun6i_pll1_clk_setup); + +static void __init sun8i_pll1_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun8i_a23_pll1_data); +} +CLK_OF_DECLARE(sun8i_pll1, "allwinner,sun8i-a23-pll1-clk", + sun8i_pll1_clk_setup); + +static void __init sun7i_pll4_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun7i_a20_pll4_data); +} +CLK_OF_DECLARE(sun7i_pll4, "allwinner,sun7i-a20-pll4-clk", + sun7i_pll4_clk_setup); + +static void __init sun5i_ahb_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun5i_a13_ahb_data); +} +CLK_OF_DECLARE(sun5i_ahb, "allwinner,sun5i-a13-ahb-clk", + sun5i_ahb_clk_setup); + +static void __init sun6i_ahb1_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun6i_ahb1_data); +} +CLK_OF_DECLARE(sun6i_a31_ahb1, "allwinner,sun6i-a31-ahb1-clk", + sun6i_ahb1_clk_setup); + +static void __init sun4i_apb1_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun4i_apb1_data); +} +CLK_OF_DECLARE(sun4i_apb1, "allwinner,sun4i-a10-apb1-clk", + sun4i_apb1_clk_setup); + +static void __init sun7i_out_clk_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun7i_a20_out_data); +} +CLK_OF_DECLARE(sun7i_out, "allwinner,sun7i-a20-out-clk", + sun7i_out_clk_setup); + + +/* + * sunxi_mux_clk_setup() - Setup function for muxes + */ + +#define SUNXI_MUX_GATE_WIDTH 2 + +struct mux_data { + u8 shift; +}; + +static const struct mux_data sun4i_cpu_mux_data __initconst = { + .shift = 16, +}; + +static const struct mux_data sun6i_a31_ahb1_mux_data __initconst = { + .shift = 12, +}; + +static const struct mux_data sun8i_h3_ahb2_mux_data __initconst = { + .shift = 0, +}; + +static struct clk * __init sunxi_mux_clk_setup(struct device_node *node, + const struct mux_data *data, + unsigned long flags) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *parents[SUNXI_MAX_PARENTS]; + void __iomem *reg; + int i; + + reg = of_iomap(node, 0); + if (!reg) { + pr_err("Could not map registers for mux-clk: %pOF\n", node); + return NULL; + } + + i = of_clk_parent_fill(node, parents, SUNXI_MAX_PARENTS); + if (of_property_read_string(node, "clock-output-names", &clk_name)) { + pr_err("%s: could not read clock-output-names from \"%pOF\"\n", + __func__, node); + goto out_unmap; + } + + clk = clk_register_mux(NULL, clk_name, parents, i, + CLK_SET_RATE_PARENT | flags, reg, + data->shift, SUNXI_MUX_GATE_WIDTH, + 0, &clk_lock); + + if (IS_ERR(clk)) { + pr_err("%s: failed to register mux clock %s: %ld\n", __func__, + clk_name, PTR_ERR(clk)); + goto out_unmap; + } + + if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) { + pr_err("%s: failed to add clock provider for %s\n", + __func__, clk_name); + clk_unregister_divider(clk); + goto out_unmap; + } + + return clk; +out_unmap: + iounmap(reg); + return NULL; +} + +static void __init sun4i_cpu_clk_setup(struct device_node *node) +{ + /* Protect CPU clock */ + sunxi_mux_clk_setup(node, &sun4i_cpu_mux_data, CLK_IS_CRITICAL); +} +CLK_OF_DECLARE(sun4i_cpu, "allwinner,sun4i-a10-cpu-clk", + sun4i_cpu_clk_setup); + +static void __init sun6i_ahb1_mux_clk_setup(struct device_node *node) +{ + sunxi_mux_clk_setup(node, &sun6i_a31_ahb1_mux_data, 0); +} +CLK_OF_DECLARE(sun6i_ahb1_mux, "allwinner,sun6i-a31-ahb1-mux-clk", + sun6i_ahb1_mux_clk_setup); + +static void __init sun8i_ahb2_clk_setup(struct device_node *node) +{ + sunxi_mux_clk_setup(node, &sun8i_h3_ahb2_mux_data, 0); +} +CLK_OF_DECLARE(sun8i_ahb2, "allwinner,sun8i-h3-ahb2-clk", + sun8i_ahb2_clk_setup); + + +/* + * sunxi_divider_clk_setup() - Setup function for simple divider clocks + */ + +struct div_data { + u8 shift; + u8 pow; + u8 width; + const struct clk_div_table *table; +}; + +static const struct div_data sun4i_axi_data __initconst = { + .shift = 0, + .pow = 0, + .width = 2, +}; + +static const struct clk_div_table sun8i_a23_axi_table[] __initconst = { + { .val = 0, .div = 1 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 3 }, + { .val = 3, .div = 4 }, + { .val = 4, .div = 4 }, + { .val = 5, .div = 4 }, + { .val = 6, .div = 4 }, + { .val = 7, .div = 4 }, + { } /* sentinel */ +}; + +static const struct div_data sun8i_a23_axi_data __initconst = { + .width = 3, + .table = sun8i_a23_axi_table, +}; + +static const struct div_data sun4i_ahb_data __initconst = { + .shift = 4, + .pow = 1, + .width = 2, +}; + +static const struct clk_div_table sun4i_apb0_table[] __initconst = { + { .val = 0, .div = 2 }, + { .val = 1, .div = 2 }, + { .val = 2, .div = 4 }, + { .val = 3, .div = 8 }, + { } /* sentinel */ +}; + +static const struct div_data sun4i_apb0_data __initconst = { + .shift = 8, + .pow = 1, + .width = 2, + .table = sun4i_apb0_table, +}; + +static void __init sunxi_divider_clk_setup(struct device_node *node, + const struct div_data *data) +{ + struct clk *clk; + const char *clk_name = node->name; + const char *clk_parent; + void __iomem *reg; + + reg = of_iomap(node, 0); + if (!reg) { + pr_err("Could not map registers for mux-clk: %pOF\n", node); + return; + } + + clk_parent = of_clk_get_parent_name(node, 0); + + if (of_property_read_string(node, "clock-output-names", &clk_name)) { + pr_err("%s: could not read clock-output-names from \"%pOF\"\n", + __func__, node); + goto out_unmap; + } + + clk = clk_register_divider_table(NULL, clk_name, clk_parent, 0, + reg, data->shift, data->width, + data->pow ? CLK_DIVIDER_POWER_OF_TWO : 0, + data->table, &clk_lock); + if (IS_ERR(clk)) { + pr_err("%s: failed to register divider clock %s: %ld\n", + __func__, clk_name, PTR_ERR(clk)); + goto out_unmap; + } + + if (of_clk_add_provider(node, of_clk_src_simple_get, clk)) { + pr_err("%s: failed to add clock provider for %s\n", + __func__, clk_name); + goto out_unregister; + } + + if (clk_register_clkdev(clk, clk_name, NULL)) { + of_clk_del_provider(node); + goto out_unregister; + } + + return; +out_unregister: + clk_unregister_divider(clk); + +out_unmap: + iounmap(reg); +} + +static void __init sun4i_ahb_clk_setup(struct device_node *node) +{ + sunxi_divider_clk_setup(node, &sun4i_ahb_data); +} +CLK_OF_DECLARE(sun4i_ahb, "allwinner,sun4i-a10-ahb-clk", + sun4i_ahb_clk_setup); + +static void __init sun4i_apb0_clk_setup(struct device_node *node) +{ + sunxi_divider_clk_setup(node, &sun4i_apb0_data); +} +CLK_OF_DECLARE(sun4i_apb0, "allwinner,sun4i-a10-apb0-clk", + sun4i_apb0_clk_setup); + +static void __init sun4i_axi_clk_setup(struct device_node *node) +{ + sunxi_divider_clk_setup(node, &sun4i_axi_data); +} +CLK_OF_DECLARE(sun4i_axi, "allwinner,sun4i-a10-axi-clk", + sun4i_axi_clk_setup); + +static void __init sun8i_axi_clk_setup(struct device_node *node) +{ + sunxi_divider_clk_setup(node, &sun8i_a23_axi_data); +} +CLK_OF_DECLARE(sun8i_axi, "allwinner,sun8i-a23-axi-clk", + sun8i_axi_clk_setup); + + + +/* + * sunxi_gates_clk_setup() - Setup function for leaf gates on clocks + */ + +#define SUNXI_GATES_MAX_SIZE 64 + +struct gates_data { + DECLARE_BITMAP(mask, SUNXI_GATES_MAX_SIZE); +}; + +/* + * sunxi_divs_clk_setup() helper data + */ + +#define SUNXI_DIVS_MAX_QTY 4 +#define SUNXI_DIVISOR_WIDTH 2 + +struct divs_data { + const struct factors_data *factors; /* data for the factor clock */ + int ndivs; /* number of outputs */ + /* + * List of outputs. Refer to the diagram for sunxi_divs_clk_setup(): + * self or base factor clock refers to the output from the pll + * itself. The remaining refer to fixed or configurable divider + * outputs. + */ + struct { + u8 self; /* is it the base factor clock? (only one) */ + u8 fixed; /* is it a fixed divisor? if not... */ + struct clk_div_table *table; /* is it a table based divisor? */ + u8 shift; /* otherwise it's a normal divisor with this shift */ + u8 pow; /* is it power-of-two based? */ + u8 gate; /* is it independently gateable? */ + bool critical; + } div[SUNXI_DIVS_MAX_QTY]; +}; + +static struct clk_div_table pll6_sata_tbl[] = { + { .val = 0, .div = 6, }, + { .val = 1, .div = 12, }, + { .val = 2, .div = 18, }, + { .val = 3, .div = 24, }, + { } /* sentinel */ +}; + +static const struct divs_data pll5_divs_data __initconst = { + .factors = &sun4i_pll5_data, + .ndivs = 2, + .div = { + /* Protect PLL5_DDR */ + { .shift = 0, .pow = 0, .critical = true }, /* M, DDR */ + { .shift = 16, .pow = 1, }, /* P, other */ + /* No output for the base factor clock */ + } +}; + +static const struct divs_data pll6_divs_data __initconst = { + .factors = &sun4i_pll5_data, + .ndivs = 4, + .div = { + { .shift = 0, .table = pll6_sata_tbl, .gate = 14 }, /* M, SATA */ + { .fixed = 2 }, /* P, other */ + { .self = 1 }, /* base factor clock, 2x */ + { .fixed = 4 }, /* pll6 / 4, used as ahb input */ + } +}; + +static const struct divs_data sun6i_a31_pll6_divs_data __initconst = { + .factors = &sun6i_a31_pll6_data, + .ndivs = 2, + .div = { + { .fixed = 2 }, /* normal output */ + { .self = 1 }, /* base factor clock, 2x */ + } +}; + +/* + * sunxi_divs_clk_setup() - Setup function for leaf divisors on clocks + * + * These clocks look something like this + * ________________________ + * | ___divisor 1---|----> to consumer + * parent >--| pll___/___divisor 2---|----> to consumer + * | \_______________|____> to consumer + * |________________________| + */ + +static struct clk ** __init sunxi_divs_clk_setup(struct device_node *node, + const struct divs_data *data) +{ + struct clk_onecell_data *clk_data; + const char *parent; + const char *clk_name; + struct clk **clks, *pclk; + struct clk_hw *gate_hw, *rate_hw; + const struct clk_ops *rate_ops; + struct clk_gate *gate = NULL; + struct clk_fixed_factor *fix_factor; + struct clk_divider *divider; + struct factors_data factors = *data->factors; + char *derived_name = NULL; + void __iomem *reg; + int ndivs = SUNXI_DIVS_MAX_QTY, i = 0; + int flags, clkflags; + + /* if number of children known, use it */ + if (data->ndivs) + ndivs = data->ndivs; + + /* Try to find a name for base factor clock */ + for (i = 0; i < ndivs; i++) { + if (data->div[i].self) { + of_property_read_string_index(node, "clock-output-names", + i, &factors.name); + break; + } + } + /* If we don't have a .self clk use the first output-name up to '_' */ + if (factors.name == NULL) { + char *endp; + + of_property_read_string_index(node, "clock-output-names", + 0, &clk_name); + endp = strchr(clk_name, '_'); + if (endp) { + derived_name = kstrndup(clk_name, endp - clk_name, + GFP_KERNEL); + if (!derived_name) + return NULL; + factors.name = derived_name; + } else { + factors.name = clk_name; + } + } + + /* Set up factor clock that we will be dividing */ + pclk = sunxi_factors_clk_setup(node, &factors); + if (!pclk) + return NULL; + + parent = __clk_get_name(pclk); + kfree(derived_name); + + reg = of_iomap(node, 0); + if (!reg) { + pr_err("Could not map registers for divs-clk: %pOF\n", node); + return NULL; + } + + clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); + if (!clk_data) + goto out_unmap; + + clks = kcalloc(ndivs, sizeof(*clks), GFP_KERNEL); + if (!clks) + goto free_clkdata; + + clk_data->clks = clks; + + /* It's not a good idea to have automatic reparenting changing + * our RAM clock! */ + clkflags = !strcmp("pll5", parent) ? 0 : CLK_SET_RATE_PARENT; + + for (i = 0; i < ndivs; i++) { + if (of_property_read_string_index(node, "clock-output-names", + i, &clk_name) != 0) + break; + + /* If this is the base factor clock, only update clks */ + if (data->div[i].self) { + clk_data->clks[i] = pclk; + continue; + } + + gate_hw = NULL; + rate_hw = NULL; + rate_ops = NULL; + + /* If this leaf clock can be gated, create a gate */ + if (data->div[i].gate) { + gate = kzalloc(sizeof(*gate), GFP_KERNEL); + if (!gate) + goto free_clks; + + gate->reg = reg; + gate->bit_idx = data->div[i].gate; + gate->lock = &clk_lock; + + gate_hw = &gate->hw; + } + + /* Leaves can be fixed or configurable divisors */ + if (data->div[i].fixed) { + fix_factor = kzalloc(sizeof(*fix_factor), GFP_KERNEL); + if (!fix_factor) + goto free_gate; + + fix_factor->mult = 1; + fix_factor->div = data->div[i].fixed; + + rate_hw = &fix_factor->hw; + rate_ops = &clk_fixed_factor_ops; + } else { + divider = kzalloc(sizeof(*divider), GFP_KERNEL); + if (!divider) + goto free_gate; + + flags = data->div[i].pow ? CLK_DIVIDER_POWER_OF_TWO : 0; + + divider->reg = reg; + divider->shift = data->div[i].shift; + divider->width = SUNXI_DIVISOR_WIDTH; + divider->flags = flags; + divider->lock = &clk_lock; + divider->table = data->div[i].table; + + rate_hw = ÷r->hw; + rate_ops = &clk_divider_ops; + } + + /* Wrap the (potential) gate and the divisor on a composite + * clock to unify them */ + clks[i] = clk_register_composite(NULL, clk_name, &parent, 1, + NULL, NULL, + rate_hw, rate_ops, + gate_hw, &clk_gate_ops, + clkflags | + (data->div[i].critical ? + CLK_IS_CRITICAL : 0)); + + WARN_ON(IS_ERR(clk_data->clks[i])); + } + + /* Adjust to the real max */ + clk_data->clk_num = i; + + if (of_clk_add_provider(node, of_clk_src_onecell_get, clk_data)) { + pr_err("%s: failed to add clock provider for %s\n", + __func__, clk_name); + goto free_gate; + } + + return clks; +free_gate: + kfree(gate); +free_clks: + kfree(clks); +free_clkdata: + kfree(clk_data); +out_unmap: + iounmap(reg); + return NULL; +} + +static void __init sun4i_pll5_clk_setup(struct device_node *node) +{ + sunxi_divs_clk_setup(node, &pll5_divs_data); +} +CLK_OF_DECLARE(sun4i_pll5, "allwinner,sun4i-a10-pll5-clk", + sun4i_pll5_clk_setup); + +static void __init sun4i_pll6_clk_setup(struct device_node *node) +{ + sunxi_divs_clk_setup(node, &pll6_divs_data); +} +CLK_OF_DECLARE(sun4i_pll6, "allwinner,sun4i-a10-pll6-clk", + sun4i_pll6_clk_setup); + +static void __init sun6i_pll6_clk_setup(struct device_node *node) +{ + sunxi_divs_clk_setup(node, &sun6i_a31_pll6_divs_data); +} +CLK_OF_DECLARE(sun6i_pll6, "allwinner,sun6i-a31-pll6-clk", + sun6i_pll6_clk_setup); + +/* + * sun6i display + * + * rate = parent_rate / (m + 1); + */ +static void sun6i_display_factors(struct factors_request *req) +{ + u8 m; + + if (req->rate > req->parent_rate) + req->rate = req->parent_rate; + + m = DIV_ROUND_UP(req->parent_rate, req->rate); + + req->rate = req->parent_rate / m; + req->m = m - 1; +} + +static const struct clk_factors_config sun6i_display_config = { + .mshift = 0, + .mwidth = 4, +}; + +static const struct factors_data sun6i_display_data __initconst = { + .enable = 31, + .mux = 24, + .muxmask = BIT(2) | BIT(1) | BIT(0), + .table = &sun6i_display_config, + .getter = sun6i_display_factors, +}; + +static void __init sun6i_display_setup(struct device_node *node) +{ + sunxi_factors_clk_setup(node, &sun6i_display_data); +} +CLK_OF_DECLARE(sun6i_display, "allwinner,sun6i-a31-display-clk", + sun6i_display_setup); -- cgit v1.2.3