From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/tegra/clk-tegra210-emc.c | 371 +++++++++++++++++++++++++++++++++++ 1 file changed, 371 insertions(+) create mode 100644 drivers/clk/tegra/clk-tegra210-emc.c (limited to 'drivers/clk/tegra/clk-tegra210-emc.c') diff --git a/drivers/clk/tegra/clk-tegra210-emc.c b/drivers/clk/tegra/clk-tegra210-emc.c new file mode 100644 index 000000000..672ca8c18 --- /dev/null +++ b/drivers/clk/tegra/clk-tegra210-emc.c @@ -0,0 +1,371 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (c) 2015-2020, NVIDIA CORPORATION. All rights reserved. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "clk.h" + +#define CLK_SOURCE_EMC 0x19c +#define CLK_SOURCE_EMC_2X_CLK_SRC GENMASK(31, 29) +#define CLK_SOURCE_EMC_MC_EMC_SAME_FREQ BIT(16) +#define CLK_SOURCE_EMC_2X_CLK_DIVISOR GENMASK(7, 0) + +#define CLK_SRC_PLLM 0 +#define CLK_SRC_PLLC 1 +#define CLK_SRC_PLLP 2 +#define CLK_SRC_CLK_M 3 +#define CLK_SRC_PLLM_UD 4 +#define CLK_SRC_PLLMB_UD 5 +#define CLK_SRC_PLLMB 6 +#define CLK_SRC_PLLP_UD 7 + +struct tegra210_clk_emc { + struct clk_hw hw; + void __iomem *regs; + + struct tegra210_clk_emc_provider *provider; + + struct clk *parents[8]; +}; + +static inline struct tegra210_clk_emc * +to_tegra210_clk_emc(struct clk_hw *hw) +{ + return container_of(hw, struct tegra210_clk_emc, hw); +} + +static const char *tegra210_clk_emc_parents[] = { + "pll_m", "pll_c", "pll_p", "clk_m", "pll_m_ud", "pll_mb_ud", + "pll_mb", "pll_p_ud", +}; + +static u8 tegra210_clk_emc_get_parent(struct clk_hw *hw) +{ + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); + u32 value; + u8 src; + + value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); + src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, value); + + return src; +} + +static unsigned long tegra210_clk_emc_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); + u32 value, div; + + /* + * CCF assumes that neither the parent nor its rate will change during + * ->set_rate(), so the parent rate passed in here was cached from the + * parent before the ->set_rate() call. + * + * This can lead to wrong results being reported for the EMC clock if + * the parent and/or parent rate have changed as part of the EMC rate + * change sequence. Fix this by overriding the parent clock with what + * we know to be the correct value after the rate change. + */ + parent_rate = clk_hw_get_rate(clk_hw_get_parent(hw)); + + value = readl_relaxed(emc->regs + CLK_SOURCE_EMC); + + div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, value); + div += 2; + + return DIV_ROUND_UP(parent_rate * 2, div); +} + +static long tegra210_clk_emc_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); + struct tegra210_clk_emc_provider *provider = emc->provider; + unsigned int i; + + if (!provider || !provider->configs || provider->num_configs == 0) + return clk_hw_get_rate(hw); + + for (i = 0; i < provider->num_configs; i++) { + if (provider->configs[i].rate >= rate) + return provider->configs[i].rate; + } + + return provider->configs[i - 1].rate; +} + +static struct clk *tegra210_clk_emc_find_parent(struct tegra210_clk_emc *emc, + u8 index) +{ + struct clk_hw *parent = clk_hw_get_parent_by_index(&emc->hw, index); + const char *name = clk_hw_get_name(parent); + + /* XXX implement cache? */ + + return __clk_lookup(name); +} + +static int tegra210_clk_emc_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); + struct tegra210_clk_emc_provider *provider = emc->provider; + struct tegra210_clk_emc_config *config; + struct device *dev = provider->dev; + struct clk_hw *old, *new, *parent; + u8 old_idx, new_idx, index; + struct clk *clk; + unsigned int i; + int err; + + if (!provider->configs || provider->num_configs == 0) + return -EINVAL; + + for (i = 0; i < provider->num_configs; i++) { + if (provider->configs[i].rate >= rate) { + config = &provider->configs[i]; + break; + } + } + + if (i == provider->num_configs) + config = &provider->configs[i - 1]; + + old_idx = tegra210_clk_emc_get_parent(hw); + new_idx = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); + + old = clk_hw_get_parent_by_index(hw, old_idx); + new = clk_hw_get_parent_by_index(hw, new_idx); + + /* if the rate has changed... */ + if (config->parent_rate != clk_hw_get_rate(old)) { + /* ... but the clock source remains the same ... */ + if (new_idx == old_idx) { + /* ... switch to the alternative clock source. */ + switch (new_idx) { + case CLK_SRC_PLLM: + new_idx = CLK_SRC_PLLMB; + break; + + case CLK_SRC_PLLM_UD: + new_idx = CLK_SRC_PLLMB_UD; + break; + + case CLK_SRC_PLLMB_UD: + new_idx = CLK_SRC_PLLM_UD; + break; + + case CLK_SRC_PLLMB: + new_idx = CLK_SRC_PLLM; + break; + } + + /* + * This should never happen because we can't deal with + * it. + */ + if (WARN_ON(new_idx == old_idx)) + return -EINVAL; + + new = clk_hw_get_parent_by_index(hw, new_idx); + } + + index = new_idx; + parent = new; + } else { + index = old_idx; + parent = old; + } + + clk = tegra210_clk_emc_find_parent(emc, index); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(dev, "failed to get parent clock for index %u: %d\n", + index, err); + return err; + } + + /* set the new parent clock to the required rate */ + if (clk_get_rate(clk) != config->parent_rate) { + err = clk_set_rate(clk, config->parent_rate); + if (err < 0) { + dev_err(dev, "failed to set rate %lu Hz for %pC: %d\n", + config->parent_rate, clk, err); + return err; + } + } + + /* enable the new parent clock */ + if (parent != old) { + err = clk_prepare_enable(clk); + if (err < 0) { + dev_err(dev, "failed to enable parent clock %pC: %d\n", + clk, err); + return err; + } + } + + /* update the EMC source configuration to reflect the new parent */ + config->value &= ~CLK_SOURCE_EMC_2X_CLK_SRC; + config->value |= FIELD_PREP(CLK_SOURCE_EMC_2X_CLK_SRC, index); + + /* + * Finally, switch the EMC programming with both old and new parent + * clocks enabled. + */ + err = provider->set_rate(dev, config); + if (err < 0) { + dev_err(dev, "failed to set EMC rate to %lu Hz: %d\n", rate, + err); + + /* + * If we're unable to switch to the new EMC frequency, we no + * longer need the new parent to be enabled. + */ + if (parent != old) + clk_disable_unprepare(clk); + + return err; + } + + /* reparent to new parent clock and disable the old parent clock */ + if (parent != old) { + clk = tegra210_clk_emc_find_parent(emc, old_idx); + if (IS_ERR(clk)) { + err = PTR_ERR(clk); + dev_err(dev, + "failed to get parent clock for index %u: %d\n", + old_idx, err); + return err; + } + + clk_hw_reparent(hw, parent); + clk_disable_unprepare(clk); + } + + return err; +} + +static const struct clk_ops tegra210_clk_emc_ops = { + .get_parent = tegra210_clk_emc_get_parent, + .recalc_rate = tegra210_clk_emc_recalc_rate, + .round_rate = tegra210_clk_emc_round_rate, + .set_rate = tegra210_clk_emc_set_rate, +}; + +struct clk *tegra210_clk_register_emc(struct device_node *np, + void __iomem *regs) +{ + struct tegra210_clk_emc *emc; + struct clk_init_data init; + struct clk *clk; + + emc = kzalloc(sizeof(*emc), GFP_KERNEL); + if (!emc) + return ERR_PTR(-ENOMEM); + + emc->regs = regs; + + init.name = "emc"; + init.ops = &tegra210_clk_emc_ops; + init.flags = CLK_IS_CRITICAL | CLK_GET_RATE_NOCACHE; + init.parent_names = tegra210_clk_emc_parents; + init.num_parents = ARRAY_SIZE(tegra210_clk_emc_parents); + emc->hw.init = &init; + + clk = clk_register(NULL, &emc->hw); + if (IS_ERR(clk)) { + kfree(emc); + return clk; + } + + return clk; +} + +int tegra210_clk_emc_attach(struct clk *clk, + struct tegra210_clk_emc_provider *provider) +{ + struct clk_hw *hw = __clk_get_hw(clk); + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(hw); + struct device *dev = provider->dev; + unsigned int i; + int err; + + if (!try_module_get(provider->owner)) + return -ENODEV; + + for (i = 0; i < provider->num_configs; i++) { + struct tegra210_clk_emc_config *config = &provider->configs[i]; + struct clk_hw *parent; + bool same_freq; + u8 div, src; + + div = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_DIVISOR, config->value); + src = FIELD_GET(CLK_SOURCE_EMC_2X_CLK_SRC, config->value); + + /* do basic sanity checking on the EMC timings */ + if (div & 0x1) { + dev_err(dev, "invalid odd divider %u for rate %lu Hz\n", + div, config->rate); + err = -EINVAL; + goto put; + } + + same_freq = config->value & CLK_SOURCE_EMC_MC_EMC_SAME_FREQ; + + if (same_freq != config->same_freq) { + dev_err(dev, + "ambiguous EMC to MC ratio for rate %lu Hz\n", + config->rate); + err = -EINVAL; + goto put; + } + + parent = clk_hw_get_parent_by_index(hw, src); + config->parent = src; + + if (src == CLK_SRC_PLLM || src == CLK_SRC_PLLM_UD) { + config->parent_rate = config->rate * (1 + div / 2); + } else { + unsigned long rate = config->rate * (1 + div / 2); + + config->parent_rate = clk_hw_get_rate(parent); + + if (config->parent_rate != rate) { + dev_err(dev, + "rate %lu Hz does not match input\n", + config->rate); + err = -EINVAL; + goto put; + } + } + } + + emc->provider = provider; + + return 0; + +put: + module_put(provider->owner); + return err; +} +EXPORT_SYMBOL_GPL(tegra210_clk_emc_attach); + +void tegra210_clk_emc_detach(struct clk *clk) +{ + struct tegra210_clk_emc *emc = to_tegra210_clk_emc(__clk_get_hw(clk)); + + module_put(emc->provider->owner); + emc->provider = NULL; +} +EXPORT_SYMBOL_GPL(tegra210_clk_emc_detach); -- cgit v1.2.3