From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/ti/autoidle.c | 257 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 257 insertions(+) create mode 100644 drivers/clk/ti/autoidle.c (limited to 'drivers/clk/ti/autoidle.c') diff --git a/drivers/clk/ti/autoidle.c b/drivers/clk/ti/autoidle.c new file mode 100644 index 000000000..27e6b9cb1 --- /dev/null +++ b/drivers/clk/ti/autoidle.c @@ -0,0 +1,257 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI clock autoidle support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + */ + +#include +#include +#include +#include +#include +#include + +#include "clock.h" + +struct clk_ti_autoidle { + struct clk_omap_reg reg; + u8 shift; + u8 flags; + const char *name; + struct list_head node; +}; + +#define AUTOIDLE_LOW 0x1 + +static LIST_HEAD(autoidle_clks); + +/* + * we have some non-atomic read/write + * operations behind it, so lets + * take one lock for handling autoidle + * of all clocks + */ +static DEFINE_SPINLOCK(autoidle_spinlock); + +static int _omap2_clk_deny_idle(struct clk_hw_omap *clk) +{ + if (clk->ops && clk->ops->deny_idle) { + unsigned long irqflags; + + spin_lock_irqsave(&autoidle_spinlock, irqflags); + clk->autoidle_count++; + if (clk->autoidle_count == 1) + clk->ops->deny_idle(clk); + + spin_unlock_irqrestore(&autoidle_spinlock, irqflags); + } + return 0; +} + +static int _omap2_clk_allow_idle(struct clk_hw_omap *clk) +{ + if (clk->ops && clk->ops->allow_idle) { + unsigned long irqflags; + + spin_lock_irqsave(&autoidle_spinlock, irqflags); + clk->autoidle_count--; + if (clk->autoidle_count == 0) + clk->ops->allow_idle(clk); + + spin_unlock_irqrestore(&autoidle_spinlock, irqflags); + } + return 0; +} + +/** + * omap2_clk_deny_idle - disable autoidle on an OMAP clock + * @clk: struct clk * to disable autoidle for + * + * Disable autoidle on an OMAP clock. + */ +int omap2_clk_deny_idle(struct clk *clk) +{ + struct clk_hw *hw; + + if (!clk) + return -EINVAL; + + hw = __clk_get_hw(clk); + + if (omap2_clk_is_hw_omap(hw)) { + struct clk_hw_omap *c = to_clk_hw_omap(hw); + + return _omap2_clk_deny_idle(c); + } + + return -EINVAL; +} + +/** + * omap2_clk_allow_idle - enable autoidle on an OMAP clock + * @clk: struct clk * to enable autoidle for + * + * Enable autoidle on an OMAP clock. + */ +int omap2_clk_allow_idle(struct clk *clk) +{ + struct clk_hw *hw; + + if (!clk) + return -EINVAL; + + hw = __clk_get_hw(clk); + + if (omap2_clk_is_hw_omap(hw)) { + struct clk_hw_omap *c = to_clk_hw_omap(hw); + + return _omap2_clk_allow_idle(c); + } + + return -EINVAL; +} + +static void _allow_autoidle(struct clk_ti_autoidle *clk) +{ + u32 val; + + val = ti_clk_ll_ops->clk_readl(&clk->reg); + + if (clk->flags & AUTOIDLE_LOW) + val &= ~(1 << clk->shift); + else + val |= (1 << clk->shift); + + ti_clk_ll_ops->clk_writel(val, &clk->reg); +} + +static void _deny_autoidle(struct clk_ti_autoidle *clk) +{ + u32 val; + + val = ti_clk_ll_ops->clk_readl(&clk->reg); + + if (clk->flags & AUTOIDLE_LOW) + val |= (1 << clk->shift); + else + val &= ~(1 << clk->shift); + + ti_clk_ll_ops->clk_writel(val, &clk->reg); +} + +/** + * _clk_generic_allow_autoidle_all - enable autoidle for all clocks + * + * Enables hardware autoidle for all registered DT clocks, which have + * the feature. + */ +static void _clk_generic_allow_autoidle_all(void) +{ + struct clk_ti_autoidle *c; + + list_for_each_entry(c, &autoidle_clks, node) + _allow_autoidle(c); +} + +/** + * _clk_generic_deny_autoidle_all - disable autoidle for all clocks + * + * Disables hardware autoidle for all registered DT clocks, which have + * the feature. + */ +static void _clk_generic_deny_autoidle_all(void) +{ + struct clk_ti_autoidle *c; + + list_for_each_entry(c, &autoidle_clks, node) + _deny_autoidle(c); +} + +/** + * of_ti_clk_autoidle_setup - sets up hardware autoidle for a clock + * @node: pointer to the clock device node + * + * Checks if a clock has hardware autoidle support or not (check + * for presence of 'ti,autoidle-shift' property in the device tree + * node) and sets up the hardware autoidle feature for the clock + * if available. If autoidle is available, the clock is also added + * to the autoidle list for later processing. Returns 0 on success, + * negative error value on failure. + */ +int __init of_ti_clk_autoidle_setup(struct device_node *node) +{ + u32 shift; + struct clk_ti_autoidle *clk; + int ret; + + /* Check if this clock has autoidle support or not */ + if (of_property_read_u32(node, "ti,autoidle-shift", &shift)) + return 0; + + clk = kzalloc(sizeof(*clk), GFP_KERNEL); + + if (!clk) + return -ENOMEM; + + clk->shift = shift; + clk->name = ti_dt_clk_name(node); + ret = ti_clk_get_reg_addr(node, 0, &clk->reg); + if (ret) { + kfree(clk); + return ret; + } + + if (of_property_read_bool(node, "ti,invert-autoidle-bit")) + clk->flags |= AUTOIDLE_LOW; + + list_add(&clk->node, &autoidle_clks); + + return 0; +} + +/** + * omap2_clk_enable_autoidle_all - enable autoidle on all OMAP clocks that + * support it + * + * Enable clock autoidle on all OMAP clocks that have allow_idle + * function pointers associated with them. This function is intended + * to be temporary until support for this is added to the common clock + * code. Returns 0. + */ +int omap2_clk_enable_autoidle_all(void) +{ + int ret; + + ret = omap2_clk_for_each(_omap2_clk_allow_idle); + if (ret) + return ret; + + _clk_generic_allow_autoidle_all(); + + return 0; +} + +/** + * omap2_clk_disable_autoidle_all - disable autoidle on all OMAP clocks that + * support it + * + * Disable clock autoidle on all OMAP clocks that have allow_idle + * function pointers associated with them. This function is intended + * to be temporary until support for this is added to the common clock + * code. Returns 0. + */ +int omap2_clk_disable_autoidle_all(void) +{ + int ret; + + ret = omap2_clk_for_each(_omap2_clk_deny_idle); + if (ret) + return ret; + + _clk_generic_deny_autoidle_all(); + + return 0; +} -- cgit v1.2.3