From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clk/ti/dpll.c | 726 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 726 insertions(+) create mode 100644 drivers/clk/ti/dpll.c (limited to 'drivers/clk/ti/dpll.c') diff --git a/drivers/clk/ti/dpll.c b/drivers/clk/ti/dpll.c new file mode 100644 index 000000000..403ec81f5 --- /dev/null +++ b/drivers/clk/ti/dpll.c @@ -0,0 +1,726 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * OMAP DPLL clock support + * + * Copyright (C) 2013 Texas Instruments, Inc. + * + * Tero Kristo + */ + +#include +#include +#include +#include +#include +#include +#include +#include "clock.h" + +#undef pr_fmt +#define pr_fmt(fmt) "%s: " fmt, __func__ + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static const struct clk_ops dpll_m4xen_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap4_dpll_regm4xen_recalc, + .round_rate = &omap4_dpll_regm4xen_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap4_dpll_regm4xen_determine_rate, + .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_core_dpll_save_context, + .restore_context = &omap3_core_dpll_restore_context, +}; +#else +static const struct clk_ops dpll_m4xen_ck_ops = {}; +#endif + +#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4) || \ + defined(CONFIG_SOC_OMAP5) || defined(CONFIG_SOC_DRA7XX) || \ + defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static const struct clk_ops dpll_core_ck_ops = { + .recalc_rate = &omap3_dpll_recalc, + .get_parent = &omap2_init_dpll_parent, +}; + +static const struct clk_ops dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, + .get_parent = &omap2_init_dpll_parent, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context, +}; + +static const struct clk_ops dpll_no_gate_ck_ops = { + .recalc_rate = &omap3_dpll_recalc, + .get_parent = &omap2_init_dpll_parent, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, + .save_context = &omap3_noncore_dpll_save_context, + .restore_context = &omap3_noncore_dpll_restore_context +}; +#else +static const struct clk_ops dpll_core_ck_ops = {}; +static const struct clk_ops dpll_ck_ops = {}; +static const struct clk_ops dpll_no_gate_ck_ops = {}; +const struct clk_hw_omap_ops clkhwops_omap3_dpll = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP2 +static const struct clk_ops omap2_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap2_dpllcore_recalc, + .round_rate = &omap2_dpll_round_rate, + .set_rate = &omap2_reprogram_dpllcore, +}; +#else +static const struct clk_ops omap2_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_core_ck_ops = { + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .round_rate = &omap2_dpll_round_rate, +}; +#else +static const struct clk_ops omap3_dpll_core_ck_ops = {}; +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static const struct clk_ops omap3_dpll_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_noncore_dpll_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, + .round_rate = &omap2_dpll_round_rate, +}; + +static const struct clk_ops omap3_dpll5_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_dpll5_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, + .round_rate = &omap2_dpll_round_rate, +}; + +static const struct clk_ops omap3_dpll_per_ck_ops = { + .enable = &omap3_noncore_dpll_enable, + .disable = &omap3_noncore_dpll_disable, + .get_parent = &omap2_init_dpll_parent, + .recalc_rate = &omap3_dpll_recalc, + .set_rate = &omap3_dpll4_set_rate, + .set_parent = &omap3_noncore_dpll_set_parent, + .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent, + .determine_rate = &omap3_noncore_dpll_determine_rate, + .round_rate = &omap2_dpll_round_rate, +}; +#endif + +static const struct clk_ops dpll_x2_ck_ops = { + .recalc_rate = &omap3_clkoutx2_recalc, +}; + +/** + * _register_dpll - low level registration of a DPLL clock + * @user: pointer to the hardware clock definition for the clock + * @node: device node for the clock + * + * Finalizes DPLL registration process. In case a failure (clk-ref or + * clk-bypass is missing), the clock is added to retry list and + * the initialization is retried on later stage. + */ +static void __init _register_dpll(void *user, + struct device_node *node) +{ + struct clk_hw *hw = user; + struct clk_hw_omap *clk_hw = to_clk_hw_omap(hw); + struct dpll_data *dd = clk_hw->dpll_data; + const char *name; + struct clk *clk; + const struct clk_init_data *init = hw->init; + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + pr_debug("clk-ref missing for %pOFn, retry later\n", + node); + if (!ti_clk_retry_init(node, hw, _register_dpll)) + return; + + goto cleanup; + } + + dd->clk_ref = __clk_get_hw(clk); + + clk = of_clk_get(node, 1); + + if (IS_ERR(clk)) { + pr_debug("clk-bypass missing for %pOFn, retry later\n", + node); + if (!ti_clk_retry_init(node, hw, _register_dpll)) + return; + + goto cleanup; + } + + dd->clk_bypass = __clk_get_hw(clk); + + /* register the clock */ + name = ti_dt_clk_name(node); + clk = of_ti_clk_register_omap_hw(node, &clk_hw->hw, name); + + if (!IS_ERR(clk)) { + of_clk_add_provider(node, of_clk_src_simple_get, clk); + kfree(init->parent_names); + kfree(init); + return; + } + +cleanup: + kfree(clk_hw->dpll_data); + kfree(init->parent_names); + kfree(init); + kfree(clk_hw); +} + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM33XX) || \ + defined(CONFIG_SOC_AM43XX) +/** + * _register_dpll_x2 - Registers a DPLLx2 clock + * @node: device node for this clock + * @ops: clk_ops for this clock + * @hw_ops: clk_hw_ops for this clock + * + * Initializes a DPLL x 2 clock from device tree data. + */ +static void _register_dpll_x2(struct device_node *node, + const struct clk_ops *ops, + const struct clk_hw_omap_ops *hw_ops) +{ + struct clk *clk; + struct clk_init_data init = { NULL }; + struct clk_hw_omap *clk_hw; + const char *name = ti_dt_clk_name(node); + const char *parent_name; + + parent_name = of_clk_get_parent_name(node, 0); + if (!parent_name) { + pr_err("%pOFn must have parent\n", node); + return; + } + + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + if (!clk_hw) + return; + + clk_hw->ops = hw_ops; + clk_hw->hw.init = &init; + + init.name = name; + init.ops = ops; + init.parent_names = &parent_name; + init.num_parents = 1; + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) + if (hw_ops == &clkhwops_omap4_dpllmx) { + int ret; + + /* Check if register defined, if not, drop hw-ops */ + ret = of_property_count_elems_of_size(node, "reg", 1); + if (ret <= 0) { + clk_hw->ops = NULL; + } else if (ti_clk_get_reg_addr(node, 0, &clk_hw->clksel_reg)) { + kfree(clk_hw); + return; + } + } +#endif + + /* register the clock */ + clk = of_ti_clk_register_omap_hw(node, &clk_hw->hw, name); + + if (IS_ERR(clk)) + kfree(clk_hw); + else + of_clk_add_provider(node, of_clk_src_simple_get, clk); +} +#endif + +/** + * of_ti_dpll_setup - Setup function for OMAP DPLL clocks + * @node: device node containing the DPLL info + * @ops: ops for the DPLL + * @ddt: DPLL data template to use + * + * Initializes a DPLL clock from device tree data. + */ +static void __init of_ti_dpll_setup(struct device_node *node, + const struct clk_ops *ops, + const struct dpll_data *ddt) +{ + struct clk_hw_omap *clk_hw = NULL; + struct clk_init_data *init = NULL; + const char **parent_names = NULL; + struct dpll_data *dd = NULL; + int ssc_clk_index; + u8 dpll_mode = 0; + u32 min_div; + + dd = kmemdup(ddt, sizeof(*dd), GFP_KERNEL); + clk_hw = kzalloc(sizeof(*clk_hw), GFP_KERNEL); + init = kzalloc(sizeof(*init), GFP_KERNEL); + if (!dd || !clk_hw || !init) + goto cleanup; + + clk_hw->dpll_data = dd; + clk_hw->ops = &clkhwops_omap3_dpll; + clk_hw->hw.init = init; + + init->name = ti_dt_clk_name(node); + init->ops = ops; + + init->num_parents = of_clk_get_parent_count(node); + if (!init->num_parents) { + pr_err("%pOFn must have parent(s)\n", node); + goto cleanup; + } + + parent_names = kcalloc(init->num_parents, sizeof(char *), GFP_KERNEL); + if (!parent_names) + goto cleanup; + + of_clk_parent_fill(node, parent_names, init->num_parents); + + init->parent_names = parent_names; + + if (ti_clk_get_reg_addr(node, 0, &dd->control_reg)) + goto cleanup; + + /* + * Special case for OMAP2 DPLL, register order is different due to + * missing idlest_reg, also clkhwops is different. Detected from + * missing idlest_mask. + */ + if (!dd->idlest_mask) { + if (ti_clk_get_reg_addr(node, 1, &dd->mult_div1_reg)) + goto cleanup; +#ifdef CONFIG_ARCH_OMAP2 + clk_hw->ops = &clkhwops_omap2xxx_dpll; + omap2xxx_clkt_dpllcore_init(&clk_hw->hw); +#endif + } else { + if (ti_clk_get_reg_addr(node, 1, &dd->idlest_reg)) + goto cleanup; + + if (ti_clk_get_reg_addr(node, 2, &dd->mult_div1_reg)) + goto cleanup; + } + + if (dd->autoidle_mask) { + if (ti_clk_get_reg_addr(node, 3, &dd->autoidle_reg)) + goto cleanup; + + ssc_clk_index = 4; + } else { + ssc_clk_index = 3; + } + + if (dd->ssc_deltam_int_mask && dd->ssc_deltam_frac_mask && + dd->ssc_modfreq_mant_mask && dd->ssc_modfreq_exp_mask) { + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_deltam_reg)) + goto cleanup; + + if (ti_clk_get_reg_addr(node, ssc_clk_index++, + &dd->ssc_modfreq_reg)) + goto cleanup; + + of_property_read_u32(node, "ti,ssc-modfreq-hz", + &dd->ssc_modfreq); + of_property_read_u32(node, "ti,ssc-deltam", &dd->ssc_deltam); + dd->ssc_downspread = + of_property_read_bool(node, "ti,ssc-downspread"); + } + + if (of_property_read_bool(node, "ti,low-power-stop")) + dpll_mode |= 1 << DPLL_LOW_POWER_STOP; + + if (of_property_read_bool(node, "ti,low-power-bypass")) + dpll_mode |= 1 << DPLL_LOW_POWER_BYPASS; + + if (of_property_read_bool(node, "ti,lock")) + dpll_mode |= 1 << DPLL_LOCKED; + + if (!of_property_read_u32(node, "ti,min-div", &min_div) && + min_div > dd->min_divider) + dd->min_divider = min_div; + + if (dpll_mode) + dd->modes = dpll_mode; + + _register_dpll(&clk_hw->hw, node); + return; + +cleanup: + kfree(dd); + kfree(parent_names); + kfree(init); + kfree(clk_hw); +} + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static void __init of_ti_omap4_dpll_x2_setup(struct device_node *node) +{ + _register_dpll_x2(node, &dpll_x2_ck_ops, &clkhwops_omap4_dpllmx); +} +CLK_OF_DECLARE(ti_omap4_dpll_x2_clock, "ti,omap4-dpll-x2-clock", + of_ti_omap4_dpll_x2_setup); +#endif + +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static void __init of_ti_am3_dpll_x2_setup(struct device_node *node) +{ + _register_dpll_x2(node, &dpll_x2_ck_ops, NULL); +} +CLK_OF_DECLARE(ti_am3_dpll_x2_clock, "ti,am3-dpll-x2-clock", + of_ti_am3_dpll_x2_setup); +#endif + +#ifdef CONFIG_ARCH_OMAP3 +static void __init of_ti_omap3_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf0, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + if ((of_machine_is_compatible("ti,omap3630") || + of_machine_is_compatible("ti,omap36xx")) && + of_node_name_eq(node, "dpll5_ck")) + of_ti_dpll_setup(node, &omap3_dpll5_ck_ops, &dd); + else + of_ti_dpll_setup(node, &omap3_dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap3_dpll_clock, "ti,omap3-dpll-clock", + of_ti_omap3_dpll_setup); + +static void __init of_ti_omap3_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 16, + .div1_mask = 0x7f << 8, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf0, + }; + + of_ti_dpll_setup(node, &omap3_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap3_core_dpll_clock, "ti,omap3-dpll-core-clock", + of_ti_omap3_core_dpll_setup); + +static void __init of_ti_omap3_per_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1 << 1, + .enable_mask = 0x7 << 16, + .autoidle_mask = 0x7 << 3, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .freqsel_mask = 0xf00000, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap3_per_dpll_clock, "ti,omap3-dpll-per-clock", + of_ti_omap3_per_dpll_setup); + +static void __init of_ti_omap3_per_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1 << 1, + .enable_mask = 0x7 << 16, + .autoidle_mask = 0x7 << 3, + .mult_mask = 0xfff << 8, + .div1_mask = 0x7f, + .max_multiplier = 4095, + .max_divider = 128, + .min_divider = 1, + .sddiv_mask = 0xff << 24, + .dco_mask = 0xe << 20, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_STOP) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &omap3_dpll_per_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap3_per_jtype_dpll_clock, "ti,omap3-dpll-per-j-type-clock", + of_ti_omap3_per_jtype_dpll_setup); +#endif + +static void __init of_ti_omap4_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap4_dpll_clock, "ti,omap4-dpll-clock", + of_ti_omap4_dpll_setup); + +static void __init of_ti_omap5_mpu_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .dcc_mask = BIT(22), + .dcc_rate = 1400000000, /* DCC beyond 1.4GHz */ + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(of_ti_omap5_mpu_dpll_clock, "ti,omap5-mpu-dpll-clock", + of_ti_omap5_mpu_dpll_setup); + +static void __init of_ti_omap4_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap4_core_dpll_clock, "ti,omap4-dpll-core-clock", + of_ti_omap4_core_dpll_setup); + +#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \ + defined(CONFIG_SOC_DRA7XX) +static void __init of_ti_omap4_m4xen_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .m4xen_mask = 0x800, + .lpmode_mask = 1 << 10, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap4_m4xen_dpll_clock, "ti,omap4-dpll-m4xen-clock", + of_ti_omap4_m4xen_dpll_setup); + +static void __init of_ti_omap4_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .autoidle_mask = 0x7, + .mult_mask = 0xfff << 8, + .div1_mask = 0xff, + .max_multiplier = 4095, + .max_divider = 256, + .min_divider = 1, + .sddiv_mask = 0xff << 24, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_m4xen_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap4_jtype_dpll_clock, "ti,omap4-dpll-j-type-clock", + of_ti_omap4_jtype_dpll_setup); +#endif + +static void __init of_ti_am3_no_gate_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_downspread_mask = 0x1 << 14, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .max_rate = 1000000000, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_am3_no_gate_dpll_clock, "ti,am3-dpll-no-gate-clock", + of_ti_am3_no_gate_dpll_setup); + +static void __init of_ti_am3_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 4095, + .max_divider = 256, + .min_divider = 2, + .flags = DPLL_J_TYPE, + .max_rate = 2000000000, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_am3_jtype_dpll_clock, "ti,am3-dpll-j-type-clock", + of_ti_am3_jtype_dpll_setup); + +static void __init of_ti_am3_no_gate_jtype_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .max_rate = 2000000000, + .flags = DPLL_J_TYPE, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_no_gate_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_am3_no_gate_jtype_dpll_clock, + "ti,am3-dpll-no-gate-j-type-clock", + of_ti_am3_no_gate_jtype_dpll_setup); + +static void __init of_ti_am3_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .ssc_enable_mask = 0x1 << 12, + .ssc_downspread_mask = 0x1 << 14, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .ssc_deltam_int_mask = 0x3 << 18, + .ssc_deltam_frac_mask = 0x3ffff, + .ssc_modfreq_mant_mask = 0x7f, + .ssc_modfreq_exp_mask = 0x7 << 8, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .max_rate = 1000000000, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_am3_dpll_clock, "ti,am3-dpll-clock", of_ti_am3_dpll_setup); + +static void __init of_ti_am3_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .idlest_mask = 0x1, + .enable_mask = 0x7, + .mult_mask = 0x7ff << 8, + .div1_mask = 0x7f, + .max_multiplier = 2047, + .max_divider = 128, + .min_divider = 1, + .max_rate = 1000000000, + .modes = (1 << DPLL_LOW_POWER_BYPASS) | (1 << DPLL_LOCKED), + }; + + of_ti_dpll_setup(node, &dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_am3_core_dpll_clock, "ti,am3-dpll-core-clock", + of_ti_am3_core_dpll_setup); + +static void __init of_ti_omap2_core_dpll_setup(struct device_node *node) +{ + const struct dpll_data dd = { + .enable_mask = 0x3, + .mult_mask = 0x3ff << 12, + .div1_mask = 0xf << 8, + .max_divider = 16, + .min_divider = 1, + }; + + of_ti_dpll_setup(node, &omap2_dpll_core_ck_ops, &dd); +} +CLK_OF_DECLARE(ti_omap2_core_dpll_clock, "ti,omap2-dpll-core-clock", + of_ti_omap2_core_dpll_setup); -- cgit v1.2.3