From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clocksource/timer-atmel-tcb.c | 510 ++++++++++++++++++++++++++++++++++ 1 file changed, 510 insertions(+) create mode 100644 drivers/clocksource/timer-atmel-tcb.c (limited to 'drivers/clocksource/timer-atmel-tcb.c') diff --git a/drivers/clocksource/timer-atmel-tcb.c b/drivers/clocksource/timer-atmel-tcb.c new file mode 100644 index 000000000..27af17c99 --- /dev/null +++ b/drivers/clocksource/timer-atmel-tcb.c @@ -0,0 +1,510 @@ +// SPDX-License-Identifier: GPL-2.0 +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + + +/* + * We're configured to use a specific TC block, one that's not hooked + * up to external hardware, to provide a time solution: + * + * - Two channels combine to create a free-running 32 bit counter + * with a base rate of 5+ MHz, packaged as a clocksource (with + * resolution better than 200 nsec). + * - Some chips support 32 bit counter. A single channel is used for + * this 32 bit free-running counter. the second channel is not used. + * + * - The third channel may be used to provide a clockevent source, used in + * either periodic or oneshot mode. For 16-bit counter its runs at 32 KiHZ, + * and can handle delays of up to two seconds. For 32-bit counters, it runs at + * the same rate as the clocksource + * + * REVISIT behavior during system suspend states... we should disable + * all clocks and save the power. Easily done for clockevent devices, + * but clocksources won't necessarily get the needed notifications. + * For deeper system sleep states, this will be mandatory... + */ + +static void __iomem *tcaddr; +static struct +{ + u32 cmr; + u32 imr; + u32 rc; + bool clken; +} tcb_cache[3]; +static u32 bmr_cache; + +static const u8 atmel_tcb_divisors[] = { 2, 8, 32, 128 }; + +static u64 tc_get_cycles(struct clocksource *cs) +{ + unsigned long flags; + u32 lower, upper; + + raw_local_irq_save(flags); + do { + upper = readl_relaxed(tcaddr + ATMEL_TC_REG(1, CV)); + lower = readl_relaxed(tcaddr + ATMEL_TC_REG(0, CV)); + } while (upper != readl_relaxed(tcaddr + ATMEL_TC_REG(1, CV))); + + raw_local_irq_restore(flags); + return (upper << 16) | lower; +} + +static u64 tc_get_cycles32(struct clocksource *cs) +{ + return readl_relaxed(tcaddr + ATMEL_TC_REG(0, CV)); +} + +static void tc_clksrc_suspend(struct clocksource *cs) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) { + tcb_cache[i].cmr = readl(tcaddr + ATMEL_TC_REG(i, CMR)); + tcb_cache[i].imr = readl(tcaddr + ATMEL_TC_REG(i, IMR)); + tcb_cache[i].rc = readl(tcaddr + ATMEL_TC_REG(i, RC)); + tcb_cache[i].clken = !!(readl(tcaddr + ATMEL_TC_REG(i, SR)) & + ATMEL_TC_CLKSTA); + } + + bmr_cache = readl(tcaddr + ATMEL_TC_BMR); +} + +static void tc_clksrc_resume(struct clocksource *cs) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(tcb_cache); i++) { + /* Restore registers for the channel, RA and RB are not used */ + writel(tcb_cache[i].cmr, tcaddr + ATMEL_TC_REG(i, CMR)); + writel(tcb_cache[i].rc, tcaddr + ATMEL_TC_REG(i, RC)); + writel(0, tcaddr + ATMEL_TC_REG(i, RA)); + writel(0, tcaddr + ATMEL_TC_REG(i, RB)); + /* Disable all the interrupts */ + writel(0xff, tcaddr + ATMEL_TC_REG(i, IDR)); + /* Reenable interrupts that were enabled before suspending */ + writel(tcb_cache[i].imr, tcaddr + ATMEL_TC_REG(i, IER)); + /* Start the clock if it was used */ + if (tcb_cache[i].clken) + writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(i, CCR)); + } + + /* Dual channel, chain channels */ + writel(bmr_cache, tcaddr + ATMEL_TC_BMR); + /* Finally, trigger all the channels*/ + writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); +} + +static struct clocksource clksrc = { + .rating = 200, + .read = tc_get_cycles, + .mask = CLOCKSOURCE_MASK(32), + .flags = CLOCK_SOURCE_IS_CONTINUOUS, + .suspend = tc_clksrc_suspend, + .resume = tc_clksrc_resume, +}; + +static u64 notrace tc_sched_clock_read(void) +{ + return tc_get_cycles(&clksrc); +} + +static u64 notrace tc_sched_clock_read32(void) +{ + return tc_get_cycles32(&clksrc); +} + +static struct delay_timer tc_delay_timer; + +static unsigned long tc_delay_timer_read(void) +{ + return tc_get_cycles(&clksrc); +} + +static unsigned long notrace tc_delay_timer_read32(void) +{ + return tc_get_cycles32(&clksrc); +} + +#ifdef CONFIG_GENERIC_CLOCKEVENTS + +struct tc_clkevt_device { + struct clock_event_device clkevt; + struct clk *clk; + u32 rate; + void __iomem *regs; +}; + +static struct tc_clkevt_device *to_tc_clkevt(struct clock_event_device *clkevt) +{ + return container_of(clkevt, struct tc_clkevt_device, clkevt); +} + +static u32 timer_clock; + +static int tc_shutdown(struct clock_event_device *d) +{ + struct tc_clkevt_device *tcd = to_tc_clkevt(d); + void __iomem *regs = tcd->regs; + + writel(0xff, regs + ATMEL_TC_REG(2, IDR)); + writel(ATMEL_TC_CLKDIS, regs + ATMEL_TC_REG(2, CCR)); + if (!clockevent_state_detached(d)) + clk_disable(tcd->clk); + + return 0; +} + +static int tc_set_oneshot(struct clock_event_device *d) +{ + struct tc_clkevt_device *tcd = to_tc_clkevt(d); + void __iomem *regs = tcd->regs; + + if (clockevent_state_oneshot(d) || clockevent_state_periodic(d)) + tc_shutdown(d); + + clk_enable(tcd->clk); + + /* count up to RC, then irq and stop */ + writel(timer_clock | ATMEL_TC_CPCSTOP | ATMEL_TC_WAVE | + ATMEL_TC_WAVESEL_UP_AUTO, regs + ATMEL_TC_REG(2, CMR)); + writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER)); + + /* set_next_event() configures and starts the timer */ + return 0; +} + +static int tc_set_periodic(struct clock_event_device *d) +{ + struct tc_clkevt_device *tcd = to_tc_clkevt(d); + void __iomem *regs = tcd->regs; + + if (clockevent_state_oneshot(d) || clockevent_state_periodic(d)) + tc_shutdown(d); + + /* By not making the gentime core emulate periodic mode on top + * of oneshot, we get lower overhead and improved accuracy. + */ + clk_enable(tcd->clk); + + /* count up to RC, then irq and restart */ + writel(timer_clock | ATMEL_TC_WAVE | ATMEL_TC_WAVESEL_UP_AUTO, + regs + ATMEL_TC_REG(2, CMR)); + writel((tcd->rate + HZ / 2) / HZ, tcaddr + ATMEL_TC_REG(2, RC)); + + /* Enable clock and interrupts on RC compare */ + writel(ATMEL_TC_CPCS, regs + ATMEL_TC_REG(2, IER)); + + /* go go gadget! */ + writel(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, regs + + ATMEL_TC_REG(2, CCR)); + return 0; +} + +static int tc_next_event(unsigned long delta, struct clock_event_device *d) +{ + writel_relaxed(delta, tcaddr + ATMEL_TC_REG(2, RC)); + + /* go go gadget! */ + writel_relaxed(ATMEL_TC_CLKEN | ATMEL_TC_SWTRG, + tcaddr + ATMEL_TC_REG(2, CCR)); + return 0; +} + +static struct tc_clkevt_device clkevt = { + .clkevt = { + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + /* Should be lower than at91rm9200's system timer */ + .rating = 125, + .set_next_event = tc_next_event, + .set_state_shutdown = tc_shutdown, + .set_state_periodic = tc_set_periodic, + .set_state_oneshot = tc_set_oneshot, + }, +}; + +static irqreturn_t ch2_irq(int irq, void *handle) +{ + struct tc_clkevt_device *dev = handle; + unsigned int sr; + + sr = readl_relaxed(dev->regs + ATMEL_TC_REG(2, SR)); + if (sr & ATMEL_TC_CPCS) { + dev->clkevt.event_handler(&dev->clkevt); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx) +{ + int ret; + struct clk *t2_clk = tc->clk[2]; + int irq = tc->irq[2]; + int bits = tc->tcb_config->counter_width; + + /* try to enable t2 clk to avoid future errors in mode change */ + ret = clk_prepare_enable(t2_clk); + if (ret) + return ret; + + clkevt.regs = tc->regs; + clkevt.clk = t2_clk; + + if (bits == 32) { + timer_clock = divisor_idx; + clkevt.rate = clk_get_rate(t2_clk) / atmel_tcb_divisors[divisor_idx]; + } else { + ret = clk_prepare_enable(tc->slow_clk); + if (ret) { + clk_disable_unprepare(t2_clk); + return ret; + } + + clkevt.rate = clk_get_rate(tc->slow_clk); + timer_clock = ATMEL_TC_TIMER_CLOCK5; + } + + clk_disable(t2_clk); + + clkevt.clkevt.cpumask = cpumask_of(0); + + ret = request_irq(irq, ch2_irq, IRQF_TIMER, "tc_clkevt", &clkevt); + if (ret) { + clk_unprepare(t2_clk); + if (bits != 32) + clk_disable_unprepare(tc->slow_clk); + return ret; + } + + clockevents_config_and_register(&clkevt.clkevt, clkevt.rate, 1, BIT(bits) - 1); + + return ret; +} + +#else /* !CONFIG_GENERIC_CLOCKEVENTS */ + +static int __init setup_clkevents(struct atmel_tc *tc, int divisor_idx) +{ + /* NOTHING */ + return 0; +} + +#endif + +static void __init tcb_setup_dual_chan(struct atmel_tc *tc, int mck_divisor_idx) +{ + /* channel 0: waveform mode, input mclk/8, clock TIOA0 on overflow */ + writel(mck_divisor_idx /* likely divide-by-8 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP /* free-run */ + | ATMEL_TC_ACPA_SET /* TIOA0 rises at 0 */ + | ATMEL_TC_ACPC_CLEAR, /* (duty cycle 50%) */ + tcaddr + ATMEL_TC_REG(0, CMR)); + writel(0x0000, tcaddr + ATMEL_TC_REG(0, RA)); + writel(0x8000, tcaddr + ATMEL_TC_REG(0, RC)); + writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */ + writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR)); + + /* channel 1: waveform mode, input TIOA0 */ + writel(ATMEL_TC_XC1 /* input: TIOA0 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP, /* free-run */ + tcaddr + ATMEL_TC_REG(1, CMR)); + writel(0xff, tcaddr + ATMEL_TC_REG(1, IDR)); /* no irqs */ + writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(1, CCR)); + + /* chain channel 0 to channel 1*/ + writel(ATMEL_TC_TC1XC1S_TIOA0, tcaddr + ATMEL_TC_BMR); + /* then reset all the timers */ + writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); +} + +static void __init tcb_setup_single_chan(struct atmel_tc *tc, int mck_divisor_idx) +{ + /* channel 0: waveform mode, input mclk/8 */ + writel(mck_divisor_idx /* likely divide-by-8 */ + | ATMEL_TC_WAVE + | ATMEL_TC_WAVESEL_UP, /* free-run */ + tcaddr + ATMEL_TC_REG(0, CMR)); + writel(0xff, tcaddr + ATMEL_TC_REG(0, IDR)); /* no irqs */ + writel(ATMEL_TC_CLKEN, tcaddr + ATMEL_TC_REG(0, CCR)); + + /* then reset all the timers */ + writel(ATMEL_TC_SYNC, tcaddr + ATMEL_TC_BCR); +} + +static struct atmel_tcb_config tcb_rm9200_config = { + .counter_width = 16, +}; + +static struct atmel_tcb_config tcb_sam9x5_config = { + .counter_width = 32, +}; + +static struct atmel_tcb_config tcb_sama5d2_config = { + .counter_width = 32, + .has_gclk = 1, +}; + +static const struct of_device_id atmel_tcb_of_match[] = { + { .compatible = "atmel,at91rm9200-tcb", .data = &tcb_rm9200_config, }, + { .compatible = "atmel,at91sam9x5-tcb", .data = &tcb_sam9x5_config, }, + { .compatible = "atmel,sama5d2-tcb", .data = &tcb_sama5d2_config, }, + { /* sentinel */ } +}; + +static int __init tcb_clksrc_init(struct device_node *node) +{ + struct atmel_tc tc; + struct clk *t0_clk; + const struct of_device_id *match; + u64 (*tc_sched_clock)(void); + u32 rate, divided_rate = 0; + int best_divisor_idx = -1; + int bits; + int i; + int ret; + + /* Protect against multiple calls */ + if (tcaddr) + return 0; + + tc.regs = of_iomap(node->parent, 0); + if (!tc.regs) + return -ENXIO; + + t0_clk = of_clk_get_by_name(node->parent, "t0_clk"); + if (IS_ERR(t0_clk)) + return PTR_ERR(t0_clk); + + tc.slow_clk = of_clk_get_by_name(node->parent, "slow_clk"); + if (IS_ERR(tc.slow_clk)) + return PTR_ERR(tc.slow_clk); + + tc.clk[0] = t0_clk; + tc.clk[1] = of_clk_get_by_name(node->parent, "t1_clk"); + if (IS_ERR(tc.clk[1])) + tc.clk[1] = t0_clk; + tc.clk[2] = of_clk_get_by_name(node->parent, "t2_clk"); + if (IS_ERR(tc.clk[2])) + tc.clk[2] = t0_clk; + + tc.irq[2] = of_irq_get(node->parent, 2); + if (tc.irq[2] <= 0) { + tc.irq[2] = of_irq_get(node->parent, 0); + if (tc.irq[2] <= 0) + return -EINVAL; + } + + match = of_match_node(atmel_tcb_of_match, node->parent); + if (!match) + return -ENODEV; + + tc.tcb_config = match->data; + bits = tc.tcb_config->counter_width; + + for (i = 0; i < ARRAY_SIZE(tc.irq); i++) + writel(ATMEL_TC_ALL_IRQ, tc.regs + ATMEL_TC_REG(i, IDR)); + + ret = clk_prepare_enable(t0_clk); + if (ret) { + pr_debug("can't enable T0 clk\n"); + return ret; + } + + /* How fast will we be counting? Pick something over 5 MHz. */ + rate = (u32) clk_get_rate(t0_clk); + i = 0; + if (tc.tcb_config->has_gclk) + i = 1; + for (; i < ARRAY_SIZE(atmel_tcb_divisors); i++) { + unsigned divisor = atmel_tcb_divisors[i]; + unsigned tmp; + + tmp = rate / divisor; + pr_debug("TC: %u / %-3u [%d] --> %u\n", rate, divisor, i, tmp); + if ((best_divisor_idx >= 0) && (tmp < 5 * 1000 * 1000)) + break; + divided_rate = tmp; + best_divisor_idx = i; + } + + clksrc.name = kbasename(node->parent->full_name); + clkevt.clkevt.name = kbasename(node->parent->full_name); + pr_debug("%s at %d.%03d MHz\n", clksrc.name, divided_rate / 1000000, + ((divided_rate % 1000000) + 500) / 1000); + + tcaddr = tc.regs; + + if (bits == 32) { + /* use appropriate function to read 32 bit counter */ + clksrc.read = tc_get_cycles32; + /* setup only channel 0 */ + tcb_setup_single_chan(&tc, best_divisor_idx); + tc_sched_clock = tc_sched_clock_read32; + tc_delay_timer.read_current_timer = tc_delay_timer_read32; + } else { + /* we have three clocks no matter what the + * underlying platform supports. + */ + ret = clk_prepare_enable(tc.clk[1]); + if (ret) { + pr_debug("can't enable T1 clk\n"); + goto err_disable_t0; + } + /* setup both channel 0 & 1 */ + tcb_setup_dual_chan(&tc, best_divisor_idx); + tc_sched_clock = tc_sched_clock_read; + tc_delay_timer.read_current_timer = tc_delay_timer_read; + } + + /* and away we go! */ + ret = clocksource_register_hz(&clksrc, divided_rate); + if (ret) + goto err_disable_t1; + + /* channel 2: periodic and oneshot timer support */ + ret = setup_clkevents(&tc, best_divisor_idx); + if (ret) + goto err_unregister_clksrc; + + sched_clock_register(tc_sched_clock, 32, divided_rate); + + tc_delay_timer.freq = divided_rate; + register_current_timer_delay(&tc_delay_timer); + + return 0; + +err_unregister_clksrc: + clocksource_unregister(&clksrc); + +err_disable_t1: + if (bits != 32) + clk_disable_unprepare(tc.clk[1]); + +err_disable_t0: + clk_disable_unprepare(t0_clk); + + tcaddr = NULL; + + return ret; +} +TIMER_OF_DECLARE(atmel_tcb_clksrc, "atmel,tcb-timer", tcb_clksrc_init); -- cgit v1.2.3