From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clocksource/timer-cadence-ttc.c | 545 ++++++++++++++++++++++++++++++++ 1 file changed, 545 insertions(+) create mode 100644 drivers/clocksource/timer-cadence-ttc.c (limited to 'drivers/clocksource/timer-cadence-ttc.c') diff --git a/drivers/clocksource/timer-cadence-ttc.c b/drivers/clocksource/timer-cadence-ttc.c new file mode 100644 index 000000000..4efd0cf3b --- /dev/null +++ b/drivers/clocksource/timer-cadence-ttc.c @@ -0,0 +1,545 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * This file contains driver for the Cadence Triple Timer Counter Rev 06 + * + * Copyright (C) 2011-2013 Xilinx + * + * based on arch/mips/kernel/time.c timer driver + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * This driver configures the 2 16/32-bit count-up timers as follows: + * + * T1: Timer 1, clocksource for generic timekeeping + * T2: Timer 2, clockevent source for hrtimers + * T3: Timer 3, + * + * The input frequency to the timer module for emulation is 2.5MHz which is + * common to all the timer channels (T1, T2, and T3). With a pre-scaler of 32, + * the timers are clocked at 78.125KHz (12.8 us resolution). + + * The input frequency to the timer module in silicon is configurable and + * obtained from device tree. The pre-scaler of 32 is used. + */ + +/* + * Timer Register Offset Definitions of Timer 1, Increment base address by 4 + * and use same offsets for Timer 2 + */ +#define TTC_CLK_CNTRL_OFFSET 0x00 /* Clock Control Reg, RW */ +#define TTC_CNT_CNTRL_OFFSET 0x0C /* Counter Control Reg, RW */ +#define TTC_COUNT_VAL_OFFSET 0x18 /* Counter Value Reg, RO */ +#define TTC_INTR_VAL_OFFSET 0x24 /* Interval Count Reg, RW */ +#define TTC_ISR_OFFSET 0x54 /* Interrupt Status Reg, RO */ +#define TTC_IER_OFFSET 0x60 /* Interrupt Enable Reg, RW */ + +#define TTC_CNT_CNTRL_DISABLE_MASK 0x1 + +#define TTC_CLK_CNTRL_CSRC_MASK (1 << 5) /* clock source */ +#define TTC_CLK_CNTRL_PSV_MASK 0x1e +#define TTC_CLK_CNTRL_PSV_SHIFT 1 + +/* + * Setup the timers to use pre-scaling, using a fixed value for now that will + * work across most input frequency, but it may need to be more dynamic + */ +#define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ +#define PRESCALE 2048 /* The exponent must match this */ +#define CLK_CNTRL_PRESCALE ((PRESCALE_EXPONENT - 1) << 1) +#define CLK_CNTRL_PRESCALE_EN 1 +#define CNT_CNTRL_RESET (1 << 4) + +#define MAX_F_ERR 50 + +/** + * struct ttc_timer - This definition defines local timer structure + * + * @base_addr: Base address of timer + * @freq: Timer input clock frequency + * @clk: Associated clock source + * @clk_rate_change_nb Notifier block for clock rate changes + */ +struct ttc_timer { + void __iomem *base_addr; + unsigned long freq; + struct clk *clk; + struct notifier_block clk_rate_change_nb; +}; + +#define to_ttc_timer(x) \ + container_of(x, struct ttc_timer, clk_rate_change_nb) + +struct ttc_timer_clocksource { + u32 scale_clk_ctrl_reg_old; + u32 scale_clk_ctrl_reg_new; + struct ttc_timer ttc; + struct clocksource cs; +}; + +#define to_ttc_timer_clksrc(x) \ + container_of(x, struct ttc_timer_clocksource, cs) + +struct ttc_timer_clockevent { + struct ttc_timer ttc; + struct clock_event_device ce; +}; + +#define to_ttc_timer_clkevent(x) \ + container_of(x, struct ttc_timer_clockevent, ce) + +static void __iomem *ttc_sched_clock_val_reg; + +/** + * ttc_set_interval - Set the timer interval value + * + * @timer: Pointer to the timer instance + * @cycles: Timer interval ticks + **/ +static void ttc_set_interval(struct ttc_timer *timer, + unsigned long cycles) +{ + u32 ctrl_reg; + + /* Disable the counter, set the counter value and re-enable counter */ + ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); + + writel_relaxed(cycles, timer->base_addr + TTC_INTR_VAL_OFFSET); + + /* + * Reset the counter (0x10) so that it starts from 0, one-shot + * mode makes this needed for timing to be right. + */ + ctrl_reg |= CNT_CNTRL_RESET; + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); +} + +/** + * ttc_clock_event_interrupt - Clock event timer interrupt handler + * + * @irq: IRQ number of the Timer + * @dev_id: void pointer to the ttc_timer instance + * + * returns: Always IRQ_HANDLED - success + **/ +static irqreturn_t ttc_clock_event_interrupt(int irq, void *dev_id) +{ + struct ttc_timer_clockevent *ttce = dev_id; + struct ttc_timer *timer = &ttce->ttc; + + /* Acknowledge the interrupt and call event handler */ + readl_relaxed(timer->base_addr + TTC_ISR_OFFSET); + + ttce->ce.event_handler(&ttce->ce); + + return IRQ_HANDLED; +} + +/** + * __ttc_clocksource_read - Reads the timer counter register + * + * returns: Current timer counter register value + **/ +static u64 __ttc_clocksource_read(struct clocksource *cs) +{ + struct ttc_timer *timer = &to_ttc_timer_clksrc(cs)->ttc; + + return (u64)readl_relaxed(timer->base_addr + + TTC_COUNT_VAL_OFFSET); +} + +static u64 notrace ttc_sched_clock_read(void) +{ + return readl_relaxed(ttc_sched_clock_val_reg); +} + +/** + * ttc_set_next_event - Sets the time interval for next event + * + * @cycles: Timer interval ticks + * @evt: Address of clock event instance + * + * returns: Always 0 - success + **/ +static int ttc_set_next_event(unsigned long cycles, + struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + + ttc_set_interval(timer, cycles); + return 0; +} + +/** + * ttc_set_{shutdown|oneshot|periodic} - Sets the state of timer + * + * @evt: Address of clock event instance + **/ +static int ttc_shutdown(struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + u32 ctrl_reg; + + ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET); + ctrl_reg |= TTC_CNT_CNTRL_DISABLE_MASK; + writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); + return 0; +} + +static int ttc_set_periodic(struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + + ttc_set_interval(timer, + DIV_ROUND_CLOSEST(ttce->ttc.freq, PRESCALE * HZ)); + return 0; +} + +static int ttc_resume(struct clock_event_device *evt) +{ + struct ttc_timer_clockevent *ttce = to_ttc_timer_clkevent(evt); + struct ttc_timer *timer = &ttce->ttc; + u32 ctrl_reg; + + ctrl_reg = readl_relaxed(timer->base_addr + TTC_CNT_CNTRL_OFFSET); + ctrl_reg &= ~TTC_CNT_CNTRL_DISABLE_MASK; + writel_relaxed(ctrl_reg, timer->base_addr + TTC_CNT_CNTRL_OFFSET); + return 0; +} + +static int ttc_rate_change_clocksource_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clocksource *ttccs = container_of(ttc, + struct ttc_timer_clocksource, ttc); + + switch (event) { + case PRE_RATE_CHANGE: + { + u32 psv; + unsigned long factor, rate_low, rate_high; + + if (ndata->new_rate > ndata->old_rate) { + factor = DIV_ROUND_CLOSEST(ndata->new_rate, + ndata->old_rate); + rate_low = ndata->old_rate; + rate_high = ndata->new_rate; + } else { + factor = DIV_ROUND_CLOSEST(ndata->old_rate, + ndata->new_rate); + rate_low = ndata->new_rate; + rate_high = ndata->old_rate; + } + + if (!is_power_of_2(factor)) + return NOTIFY_BAD; + + if (abs(rate_high - (factor * rate_low)) > MAX_F_ERR) + return NOTIFY_BAD; + + factor = __ilog2_u32(factor); + + /* + * store timer clock ctrl register so we can restore it in case + * of an abort. + */ + ttccs->scale_clk_ctrl_reg_old = + readl_relaxed(ttccs->ttc.base_addr + + TTC_CLK_CNTRL_OFFSET); + + psv = (ttccs->scale_clk_ctrl_reg_old & + TTC_CLK_CNTRL_PSV_MASK) >> + TTC_CLK_CNTRL_PSV_SHIFT; + if (ndata->new_rate < ndata->old_rate) + psv -= factor; + else + psv += factor; + + /* prescaler within legal range? */ + if (psv & ~(TTC_CLK_CNTRL_PSV_MASK >> TTC_CLK_CNTRL_PSV_SHIFT)) + return NOTIFY_BAD; + + ttccs->scale_clk_ctrl_reg_new = ttccs->scale_clk_ctrl_reg_old & + ~TTC_CLK_CNTRL_PSV_MASK; + ttccs->scale_clk_ctrl_reg_new |= psv << TTC_CLK_CNTRL_PSV_SHIFT; + + + /* scale down: adjust divider in post-change notification */ + if (ndata->new_rate < ndata->old_rate) + return NOTIFY_DONE; + + /* scale up: adjust divider now - before frequency change */ + writel_relaxed(ttccs->scale_clk_ctrl_reg_new, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + break; + } + case POST_RATE_CHANGE: + /* scale up: pre-change notification did the adjustment */ + if (ndata->new_rate > ndata->old_rate) + return NOTIFY_OK; + + /* scale down: adjust divider now - after frequency change */ + writel_relaxed(ttccs->scale_clk_ctrl_reg_new, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + break; + + case ABORT_RATE_CHANGE: + /* we have to undo the adjustment in case we scale up */ + if (ndata->new_rate < ndata->old_rate) + return NOTIFY_OK; + + /* restore original register value */ + writel_relaxed(ttccs->scale_clk_ctrl_reg_old, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + fallthrough; + default: + return NOTIFY_DONE; + } + + return NOTIFY_DONE; +} + +static int __init ttc_setup_clocksource(struct clk *clk, void __iomem *base, + u32 timer_width) +{ + struct ttc_timer_clocksource *ttccs; + int err; + + ttccs = kzalloc(sizeof(*ttccs), GFP_KERNEL); + if (!ttccs) + return -ENOMEM; + + ttccs->ttc.clk = clk; + + err = clk_prepare_enable(ttccs->ttc.clk); + if (err) { + kfree(ttccs); + return err; + } + + ttccs->ttc.freq = clk_get_rate(ttccs->ttc.clk); + + ttccs->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clocksource_cb; + ttccs->ttc.clk_rate_change_nb.next = NULL; + + err = clk_notifier_register(ttccs->ttc.clk, + &ttccs->ttc.clk_rate_change_nb); + if (err) + pr_warn("Unable to register clock notifier.\n"); + + ttccs->ttc.base_addr = base; + ttccs->cs.name = "ttc_clocksource"; + ttccs->cs.rating = 200; + ttccs->cs.read = __ttc_clocksource_read; + ttccs->cs.mask = CLOCKSOURCE_MASK(timer_width); + ttccs->cs.flags = CLOCK_SOURCE_IS_CONTINUOUS; + + /* + * Setup the clock source counter to be an incrementing counter + * with no interrupt and it rolls over at 0xFFFF. Pre-scale + * it by 32 also. Let it start running now. + */ + writel_relaxed(0x0, ttccs->ttc.base_addr + TTC_IER_OFFSET); + writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttccs->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + writel_relaxed(CNT_CNTRL_RESET, + ttccs->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + + err = clocksource_register_hz(&ttccs->cs, ttccs->ttc.freq / PRESCALE); + if (err) { + kfree(ttccs); + return err; + } + + ttc_sched_clock_val_reg = base + TTC_COUNT_VAL_OFFSET; + sched_clock_register(ttc_sched_clock_read, timer_width, + ttccs->ttc.freq / PRESCALE); + + return 0; +} + +static int ttc_rate_change_clockevent_cb(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct clk_notifier_data *ndata = data; + struct ttc_timer *ttc = to_ttc_timer(nb); + struct ttc_timer_clockevent *ttcce = container_of(ttc, + struct ttc_timer_clockevent, ttc); + + switch (event) { + case POST_RATE_CHANGE: + /* update cached frequency */ + ttc->freq = ndata->new_rate; + + clockevents_update_freq(&ttcce->ce, ndata->new_rate / PRESCALE); + + fallthrough; + case PRE_RATE_CHANGE: + case ABORT_RATE_CHANGE: + default: + return NOTIFY_DONE; + } +} + +static int __init ttc_setup_clockevent(struct clk *clk, + void __iomem *base, u32 irq) +{ + struct ttc_timer_clockevent *ttcce; + int err; + + ttcce = kzalloc(sizeof(*ttcce), GFP_KERNEL); + if (!ttcce) + return -ENOMEM; + + ttcce->ttc.clk = clk; + + err = clk_prepare_enable(ttcce->ttc.clk); + if (err) + goto out_kfree; + + ttcce->ttc.clk_rate_change_nb.notifier_call = + ttc_rate_change_clockevent_cb; + ttcce->ttc.clk_rate_change_nb.next = NULL; + + err = clk_notifier_register(ttcce->ttc.clk, + &ttcce->ttc.clk_rate_change_nb); + if (err) { + pr_warn("Unable to register clock notifier.\n"); + goto out_kfree; + } + + ttcce->ttc.freq = clk_get_rate(ttcce->ttc.clk); + + ttcce->ttc.base_addr = base; + ttcce->ce.name = "ttc_clockevent"; + ttcce->ce.features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT; + ttcce->ce.set_next_event = ttc_set_next_event; + ttcce->ce.set_state_shutdown = ttc_shutdown; + ttcce->ce.set_state_periodic = ttc_set_periodic; + ttcce->ce.set_state_oneshot = ttc_shutdown; + ttcce->ce.tick_resume = ttc_resume; + ttcce->ce.rating = 200; + ttcce->ce.irq = irq; + ttcce->ce.cpumask = cpu_possible_mask; + + /* + * Setup the clock event timer to be an interval timer which + * is prescaled by 32 using the interval interrupt. Leave it + * disabled for now. + */ + writel_relaxed(0x23, ttcce->ttc.base_addr + TTC_CNT_CNTRL_OFFSET); + writel_relaxed(CLK_CNTRL_PRESCALE | CLK_CNTRL_PRESCALE_EN, + ttcce->ttc.base_addr + TTC_CLK_CNTRL_OFFSET); + writel_relaxed(0x1, ttcce->ttc.base_addr + TTC_IER_OFFSET); + + err = request_irq(irq, ttc_clock_event_interrupt, + IRQF_TIMER, ttcce->ce.name, ttcce); + if (err) + goto out_kfree; + + clockevents_config_and_register(&ttcce->ce, + ttcce->ttc.freq / PRESCALE, 1, 0xfffe); + + return 0; + +out_kfree: + kfree(ttcce); + return err; +} + +static int __init ttc_timer_probe(struct platform_device *pdev) +{ + unsigned int irq; + void __iomem *timer_baseaddr; + struct clk *clk_cs, *clk_ce; + static int initialized; + int clksel, ret; + u32 timer_width = 16; + struct device_node *timer = pdev->dev.of_node; + + if (initialized) + return 0; + + initialized = 1; + + /* + * Get the 1st Triple Timer Counter (TTC) block from the device tree + * and use it. Note that the event timer uses the interrupt and it's the + * 2nd TTC hence the irq_of_parse_and_map(,1) + */ + timer_baseaddr = of_iomap(timer, 0); + if (!timer_baseaddr) { + pr_err("ERROR: invalid timer base address\n"); + return -ENXIO; + } + + irq = irq_of_parse_and_map(timer, 1); + if (irq <= 0) { + pr_err("ERROR: invalid interrupt number\n"); + return -EINVAL; + } + + of_property_read_u32(timer, "timer-width", &timer_width); + + clksel = readl_relaxed(timer_baseaddr + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_cs = of_clk_get(timer, clksel); + if (IS_ERR(clk_cs)) { + pr_err("ERROR: timer input clock not found\n"); + return PTR_ERR(clk_cs); + } + + clksel = readl_relaxed(timer_baseaddr + 4 + TTC_CLK_CNTRL_OFFSET); + clksel = !!(clksel & TTC_CLK_CNTRL_CSRC_MASK); + clk_ce = of_clk_get(timer, clksel); + if (IS_ERR(clk_ce)) { + pr_err("ERROR: timer input clock not found\n"); + return PTR_ERR(clk_ce); + } + + ret = ttc_setup_clocksource(clk_cs, timer_baseaddr, timer_width); + if (ret) + return ret; + + ret = ttc_setup_clockevent(clk_ce, timer_baseaddr + 4, irq); + if (ret) + return ret; + + pr_info("%pOFn #0 at %p, irq=%d\n", timer, timer_baseaddr, irq); + + return 0; +} + +static const struct of_device_id ttc_timer_of_match[] = { + {.compatible = "cdns,ttc"}, + {}, +}; + +MODULE_DEVICE_TABLE(of, ttc_timer_of_match); + +static struct platform_driver ttc_timer_driver = { + .driver = { + .name = "cdns_ttc_timer", + .of_match_table = ttc_timer_of_match, + }, +}; +builtin_platform_driver_probe(ttc_timer_driver, ttc_timer_probe); -- cgit v1.2.3