From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clocksource/timer-integrator-ap.c | 225 ++++++++++++++++++++++++++++++ 1 file changed, 225 insertions(+) create mode 100644 drivers/clocksource/timer-integrator-ap.c (limited to 'drivers/clocksource/timer-integrator-ap.c') diff --git a/drivers/clocksource/timer-integrator-ap.c b/drivers/clocksource/timer-integrator-ap.c new file mode 100644 index 000000000..b0fcbaac5 --- /dev/null +++ b/drivers/clocksource/timer-integrator-ap.c @@ -0,0 +1,225 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Integrator/AP timer driver + * Copyright (C) 2000-2003 Deep Blue Solutions Ltd + * Copyright (c) 2014, Linaro Limited + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include "timer-sp.h" + +static void __iomem * sched_clk_base; + +static u64 notrace integrator_read_sched_clock(void) +{ + return -readl(sched_clk_base + TIMER_VALUE); +} + +static int __init integrator_clocksource_init(unsigned long inrate, + void __iomem *base) +{ + u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; + unsigned long rate = inrate; + int ret; + + if (rate >= 1500000) { + rate /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + + writel(0xffff, base + TIMER_LOAD); + writel(ctrl, base + TIMER_CTRL); + + ret = clocksource_mmio_init(base + TIMER_VALUE, "timer2", + rate, 200, 16, clocksource_mmio_readl_down); + if (ret) + return ret; + + sched_clk_base = base; + sched_clock_register(integrator_read_sched_clock, 16, rate); + + return 0; +} + +static unsigned long timer_reload; +static void __iomem * clkevt_base; + +/* + * IRQ handler for the timer + */ +static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + /* clear the interrupt */ + writel(1, clkevt_base + TIMER_INTCLR); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int clkevt_shutdown(struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + /* Disable timer */ + writel(ctrl, clkevt_base + TIMER_CTRL); + return 0; +} + +static int clkevt_set_oneshot(struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & + ~(TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC); + + /* Leave the timer disabled, .set_next_event will enable it */ + writel(ctrl, clkevt_base + TIMER_CTRL); + return 0; +} + +static int clkevt_set_periodic(struct clock_event_device *evt) +{ + u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE; + + /* Disable timer */ + writel(ctrl, clkevt_base + TIMER_CTRL); + + /* Enable the timer and start the periodic tick */ + writel(timer_reload, clkevt_base + TIMER_LOAD); + ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE; + writel(ctrl, clkevt_base + TIMER_CTRL); + return 0; +} + +static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt) +{ + unsigned long ctrl = readl(clkevt_base + TIMER_CTRL); + + writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + writel(next, clkevt_base + TIMER_LOAD); + writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL); + + return 0; +} + +static struct clock_event_device integrator_clockevent = { + .name = "timer1", + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = clkevt_shutdown, + .set_state_periodic = clkevt_set_periodic, + .set_state_oneshot = clkevt_set_oneshot, + .tick_resume = clkevt_shutdown, + .set_next_event = clkevt_set_next_event, + .rating = 300, +}; + +static int integrator_clockevent_init(unsigned long inrate, + void __iomem *base, int irq) +{ + unsigned long rate = inrate; + unsigned int ctrl = 0; + int ret; + + clkevt_base = base; + /* Calculate and program a divisor */ + if (rate > 0x100000 * HZ) { + rate /= 256; + ctrl |= TIMER_CTRL_DIV256; + } else if (rate > 0x10000 * HZ) { + rate /= 16; + ctrl |= TIMER_CTRL_DIV16; + } + timer_reload = rate / HZ; + writel(ctrl, clkevt_base + TIMER_CTRL); + + ret = request_irq(irq, integrator_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "timer", + &integrator_clockevent); + if (ret) + return ret; + + clockevents_config_and_register(&integrator_clockevent, + rate, + 1, + 0xffffU); + return 0; +} + +static int __init integrator_ap_timer_init_of(struct device_node *node) +{ + const char *path; + void __iomem *base; + int err; + int irq; + struct clk *clk; + unsigned long rate; + struct device_node *alias_node; + + base = of_io_request_and_map(node, 0, "integrator-timer"); + if (IS_ERR(base)) + return PTR_ERR(base); + + clk = of_clk_get(node, 0); + if (IS_ERR(clk)) { + pr_err("No clock for %pOFn\n", node); + return PTR_ERR(clk); + } + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + writel(0, base + TIMER_CTRL); + + err = of_property_read_string(of_aliases, + "arm,timer-primary", &path); + if (err) { + pr_warn("Failed to read property\n"); + return err; + } + + alias_node = of_find_node_by_path(path); + + /* + * The pointer is used as an identifier not as a pointer, we + * can drop the refcount on the of__node immediately after + * getting it. + */ + of_node_put(alias_node); + + if (node == alias_node) + /* The primary timer lacks IRQ, use as clocksource */ + return integrator_clocksource_init(rate, base); + + err = of_property_read_string(of_aliases, + "arm,timer-secondary", &path); + if (err) { + pr_warn("Failed to read property\n"); + return err; + } + + alias_node = of_find_node_by_path(path); + + of_node_put(alias_node); + + if (node == alias_node) { + /* The secondary timer will drive the clock event */ + irq = irq_of_parse_and_map(node, 0); + return integrator_clockevent_init(rate, base, irq); + } + + pr_info("Timer @%p unused\n", base); + clk_disable_unprepare(clk); + + return 0; +} + +TIMER_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer", + integrator_ap_timer_init_of); -- cgit v1.2.3