From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clocksource/timer-meson6.c | 212 +++++++++++++++++++++++++++++++++++++ 1 file changed, 212 insertions(+) create mode 100644 drivers/clocksource/timer-meson6.c (limited to 'drivers/clocksource/timer-meson6.c') diff --git a/drivers/clocksource/timer-meson6.c b/drivers/clocksource/timer-meson6.c new file mode 100644 index 000000000..99f5510a2 --- /dev/null +++ b/drivers/clocksource/timer-meson6.c @@ -0,0 +1,212 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Amlogic Meson6 SoCs timer handling. + * + * Copyright (C) 2014 Carlo Caione + * + * Based on code from Amlogic, Inc + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#ifdef CONFIG_ARM +#include +#endif + +#define MESON_ISA_TIMER_MUX 0x00 +#define MESON_ISA_TIMER_MUX_TIMERD_EN BIT(19) +#define MESON_ISA_TIMER_MUX_TIMERC_EN BIT(18) +#define MESON_ISA_TIMER_MUX_TIMERB_EN BIT(17) +#define MESON_ISA_TIMER_MUX_TIMERA_EN BIT(16) +#define MESON_ISA_TIMER_MUX_TIMERD_MODE BIT(15) +#define MESON_ISA_TIMER_MUX_TIMERC_MODE BIT(14) +#define MESON_ISA_TIMER_MUX_TIMERB_MODE BIT(13) +#define MESON_ISA_TIMER_MUX_TIMERA_MODE BIT(12) +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK GENMASK(10, 8) +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_SYSTEM_CLOCK 0x0 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US 0x1 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_10US 0x2 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_100US 0x3 +#define MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1MS 0x4 +#define MESON_ISA_TIMER_MUX_TIMERD_INPUT_CLOCK_MASK GENMASK(7, 6) +#define MESON_ISA_TIMER_MUX_TIMERC_INPUT_CLOCK_MASK GENMASK(5, 4) +#define MESON_ISA_TIMER_MUX_TIMERB_INPUT_CLOCK_MASK GENMASK(3, 2) +#define MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK GENMASK(1, 0) +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US 0x0 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_10US 0x1 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_100US 0x0 +#define MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1MS 0x3 + +#define MESON_ISA_TIMERA 0x04 +#define MESON_ISA_TIMERB 0x08 +#define MESON_ISA_TIMERC 0x0c +#define MESON_ISA_TIMERD 0x10 +#define MESON_ISA_TIMERE 0x14 + +static void __iomem *timer_base; + +#ifdef CONFIG_ARM +static unsigned long meson6_read_current_timer(void) +{ + return readl_relaxed(timer_base + MESON_ISA_TIMERE); +} + +static struct delay_timer meson6_delay_timer = { + .read_current_timer = meson6_read_current_timer, + .freq = 1000 * 1000, +}; +#endif + +static u64 notrace meson6_timer_sched_read(void) +{ + return (u64)readl(timer_base + MESON_ISA_TIMERE); +} + +static void meson6_clkevt_time_stop(void) +{ + u32 val = readl(timer_base + MESON_ISA_TIMER_MUX); + + writel(val & ~MESON_ISA_TIMER_MUX_TIMERA_EN, + timer_base + MESON_ISA_TIMER_MUX); +} + +static void meson6_clkevt_time_setup(unsigned long delay) +{ + writel(delay, timer_base + MESON_ISA_TIMERA); +} + +static void meson6_clkevt_time_start(bool periodic) +{ + u32 val = readl(timer_base + MESON_ISA_TIMER_MUX); + + if (periodic) + val |= MESON_ISA_TIMER_MUX_TIMERA_MODE; + else + val &= ~MESON_ISA_TIMER_MUX_TIMERA_MODE; + + writel(val | MESON_ISA_TIMER_MUX_TIMERA_EN, + timer_base + MESON_ISA_TIMER_MUX); +} + +static int meson6_shutdown(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + return 0; +} + +static int meson6_set_oneshot(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_start(false); + return 0; +} + +static int meson6_set_periodic(struct clock_event_device *evt) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_setup(USEC_PER_SEC / HZ - 1); + meson6_clkevt_time_start(true); + return 0; +} + +static int meson6_clkevt_next_event(unsigned long evt, + struct clock_event_device *unused) +{ + meson6_clkevt_time_stop(); + meson6_clkevt_time_setup(evt); + meson6_clkevt_time_start(false); + + return 0; +} + +static struct clock_event_device meson6_clockevent = { + .name = "meson6_tick", + .rating = 400, + .features = CLOCK_EVT_FEAT_PERIODIC | + CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = meson6_shutdown, + .set_state_periodic = meson6_set_periodic, + .set_state_oneshot = meson6_set_oneshot, + .tick_resume = meson6_shutdown, + .set_next_event = meson6_clkevt_next_event, +}; + +static irqreturn_t meson6_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = (struct clock_event_device *)dev_id; + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static int __init meson6_timer_init(struct device_node *node) +{ + u32 val; + int ret, irq; + + timer_base = of_io_request_and_map(node, 0, "meson6-timer"); + if (IS_ERR(timer_base)) { + pr_err("Can't map registers\n"); + return -ENXIO; + } + + irq = irq_of_parse_and_map(node, 0); + if (irq <= 0) { + pr_err("Can't parse IRQ\n"); + return -EINVAL; + } + + /* Set 1us for timer E */ + val = readl(timer_base + MESON_ISA_TIMER_MUX); + val &= ~MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK; + val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_MASK, + MESON_ISA_TIMER_MUX_TIMERE_INPUT_CLOCK_1US); + writel(val, timer_base + MESON_ISA_TIMER_MUX); + + sched_clock_register(meson6_timer_sched_read, 32, USEC_PER_SEC); + clocksource_mmio_init(timer_base + MESON_ISA_TIMERE, node->name, + 1000 * 1000, 300, 32, clocksource_mmio_readl_up); + + /* Timer A base 1us */ + val &= ~MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK; + val |= FIELD_PREP(MESON_ISA_TIMER_MUX_TIMERA_INPUT_CLOCK_MASK, + MESON_ISA_TIMER_MUX_TIMERABCD_INPUT_CLOCK_1US); + writel(val, timer_base + MESON_ISA_TIMER_MUX); + + /* Stop the timer A */ + meson6_clkevt_time_stop(); + + ret = request_irq(irq, meson6_timer_interrupt, + IRQF_TIMER | IRQF_IRQPOLL, "meson6_timer", + &meson6_clockevent); + if (ret) { + pr_warn("failed to setup irq %d\n", irq); + return ret; + } + + meson6_clockevent.cpumask = cpu_possible_mask; + meson6_clockevent.irq = irq; + + clockevents_config_and_register(&meson6_clockevent, USEC_PER_SEC, + 1, 0xfffe); + +#ifdef CONFIG_ARM + /* Also use MESON_ISA_TIMERE for delays */ + register_current_timer_delay(&meson6_delay_timer); +#endif + + return 0; +} +TIMER_OF_DECLARE(meson6, "amlogic,meson6-timer", + meson6_timer_init); -- cgit v1.2.3