From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/clocksource/timer-vf-pit.c | 194 +++++++++++++++++++++++++++++++++++++ 1 file changed, 194 insertions(+) create mode 100644 drivers/clocksource/timer-vf-pit.c (limited to 'drivers/clocksource/timer-vf-pit.c') diff --git a/drivers/clocksource/timer-vf-pit.c b/drivers/clocksource/timer-vf-pit.c new file mode 100644 index 000000000..911c92146 --- /dev/null +++ b/drivers/clocksource/timer-vf-pit.c @@ -0,0 +1,194 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright 2012-2013 Freescale Semiconductor, Inc. + */ + +#include +#include +#include +#include +#include +#include + +/* + * Each pit takes 0x10 Bytes register space + */ +#define PITMCR 0x00 +#define PIT0_OFFSET 0x100 +#define PITn_OFFSET(n) (PIT0_OFFSET + 0x10 * (n)) +#define PITLDVAL 0x00 +#define PITCVAL 0x04 +#define PITTCTRL 0x08 +#define PITTFLG 0x0c + +#define PITMCR_MDIS (0x1 << 1) + +#define PITTCTRL_TEN (0x1 << 0) +#define PITTCTRL_TIE (0x1 << 1) +#define PITCTRL_CHN (0x1 << 2) + +#define PITTFLG_TIF 0x1 + +static void __iomem *clksrc_base; +static void __iomem *clkevt_base; +static unsigned long cycle_per_jiffy; + +static inline void pit_timer_enable(void) +{ + __raw_writel(PITTCTRL_TEN | PITTCTRL_TIE, clkevt_base + PITTCTRL); +} + +static inline void pit_timer_disable(void) +{ + __raw_writel(0, clkevt_base + PITTCTRL); +} + +static inline void pit_irq_acknowledge(void) +{ + __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); +} + +static u64 notrace pit_read_sched_clock(void) +{ + return ~__raw_readl(clksrc_base + PITCVAL); +} + +static int __init pit_clocksource_init(unsigned long rate) +{ + /* set the max load value and start the clock source counter */ + __raw_writel(0, clksrc_base + PITTCTRL); + __raw_writel(~0UL, clksrc_base + PITLDVAL); + __raw_writel(PITTCTRL_TEN, clksrc_base + PITTCTRL); + + sched_clock_register(pit_read_sched_clock, 32, rate); + return clocksource_mmio_init(clksrc_base + PITCVAL, "vf-pit", rate, + 300, 32, clocksource_mmio_readl_down); +} + +static int pit_set_next_event(unsigned long delta, + struct clock_event_device *unused) +{ + /* + * set a new value to PITLDVAL register will not restart the timer, + * to abort the current cycle and start a timer period with the new + * value, the timer must be disabled and enabled again. + * and the PITLAVAL should be set to delta minus one according to pit + * hardware requirement. + */ + pit_timer_disable(); + __raw_writel(delta - 1, clkevt_base + PITLDVAL); + pit_timer_enable(); + + return 0; +} + +static int pit_shutdown(struct clock_event_device *evt) +{ + pit_timer_disable(); + return 0; +} + +static int pit_set_periodic(struct clock_event_device *evt) +{ + pit_set_next_event(cycle_per_jiffy, evt); + return 0; +} + +static irqreturn_t pit_timer_interrupt(int irq, void *dev_id) +{ + struct clock_event_device *evt = dev_id; + + pit_irq_acknowledge(); + + /* + * pit hardware doesn't support oneshot, it will generate an interrupt + * and reload the counter value from PITLDVAL when PITCVAL reach zero, + * and start the counter again. So software need to disable the timer + * to stop the counter loop in ONESHOT mode. + */ + if (likely(clockevent_state_oneshot(evt))) + pit_timer_disable(); + + evt->event_handler(evt); + + return IRQ_HANDLED; +} + +static struct clock_event_device clockevent_pit = { + .name = "VF pit timer", + .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT, + .set_state_shutdown = pit_shutdown, + .set_state_periodic = pit_set_periodic, + .set_next_event = pit_set_next_event, + .rating = 300, +}; + +static int __init pit_clockevent_init(unsigned long rate, int irq) +{ + __raw_writel(0, clkevt_base + PITTCTRL); + __raw_writel(PITTFLG_TIF, clkevt_base + PITTFLG); + + BUG_ON(request_irq(irq, pit_timer_interrupt, IRQF_TIMER | IRQF_IRQPOLL, + "VF pit timer", &clockevent_pit)); + + clockevent_pit.cpumask = cpumask_of(0); + clockevent_pit.irq = irq; + /* + * The value for the LDVAL register trigger is calculated as: + * LDVAL trigger = (period / clock period) - 1 + * The pit is a 32-bit down count timer, when the counter value + * reaches 0, it will generate an interrupt, thus the minimal + * LDVAL trigger value is 1. And then the min_delta is + * minimal LDVAL trigger value + 1, and the max_delta is full 32-bit. + */ + clockevents_config_and_register(&clockevent_pit, rate, 2, 0xffffffff); + + return 0; +} + +static int __init pit_timer_init(struct device_node *np) +{ + struct clk *pit_clk; + void __iomem *timer_base; + unsigned long clk_rate; + int irq, ret; + + timer_base = of_iomap(np, 0); + if (!timer_base) { + pr_err("Failed to iomap\n"); + return -ENXIO; + } + + /* + * PIT0 and PIT1 can be chained to build a 64-bit timer, + * so choose PIT2 as clocksource, PIT3 as clockevent device, + * and leave PIT0 and PIT1 unused for anyone else who needs them. + */ + clksrc_base = timer_base + PITn_OFFSET(2); + clkevt_base = timer_base + PITn_OFFSET(3); + + irq = irq_of_parse_and_map(np, 0); + if (irq <= 0) + return -EINVAL; + + pit_clk = of_clk_get(np, 0); + if (IS_ERR(pit_clk)) + return PTR_ERR(pit_clk); + + ret = clk_prepare_enable(pit_clk); + if (ret) + return ret; + + clk_rate = clk_get_rate(pit_clk); + cycle_per_jiffy = clk_rate / (HZ); + + /* enable the pit module */ + __raw_writel(~PITMCR_MDIS, timer_base + PITMCR); + + ret = pit_clocksource_init(clk_rate); + if (ret) + return ret; + + return pit_clockevent_init(clk_rate, irq); +} +TIMER_OF_DECLARE(vf610, "fsl,vf610-pit", pit_timer_init); -- cgit v1.2.3