From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpufreq/bmips-cpufreq.c | 189 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 drivers/cpufreq/bmips-cpufreq.c (limited to 'drivers/cpufreq/bmips-cpufreq.c') diff --git a/drivers/cpufreq/bmips-cpufreq.c b/drivers/cpufreq/bmips-cpufreq.c new file mode 100644 index 000000000..39221a9a1 --- /dev/null +++ b/drivers/cpufreq/bmips-cpufreq.c @@ -0,0 +1,189 @@ +/* + * CPU frequency scaling for Broadcom BMIPS SoCs + * + * Copyright (c) 2017 Broadcom + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed "as is" WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include + +/* for mips_hpt_frequency */ +#include + +#define BMIPS_CPUFREQ_PREFIX "bmips" +#define BMIPS_CPUFREQ_NAME BMIPS_CPUFREQ_PREFIX "-cpufreq" + +#define TRANSITION_LATENCY (25 * 1000) /* 25 us */ + +#define BMIPS5_CLK_DIV_SET_SHIFT 0x7 +#define BMIPS5_CLK_DIV_SHIFT 0x4 +#define BMIPS5_CLK_DIV_MASK 0xf + +enum bmips_type { + BMIPS5000, + BMIPS5200, +}; + +struct cpufreq_compat { + const char *compatible; + unsigned int bmips_type; + unsigned int clk_mult; + unsigned int max_freqs; +}; + +#define BMIPS(c, t, m, f) { \ + .compatible = c, \ + .bmips_type = (t), \ + .clk_mult = (m), \ + .max_freqs = (f), \ +} + +static struct cpufreq_compat bmips_cpufreq_compat[] = { + BMIPS("brcm,bmips5000", BMIPS5000, 8, 4), + BMIPS("brcm,bmips5200", BMIPS5200, 8, 4), + { } +}; + +static struct cpufreq_compat *priv; + +static int htp_freq_to_cpu_freq(unsigned int clk_mult) +{ + return mips_hpt_frequency * clk_mult / 1000; +} + +static struct cpufreq_frequency_table * +bmips_cpufreq_get_freq_table(const struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *table; + unsigned long cpu_freq; + int i; + + cpu_freq = htp_freq_to_cpu_freq(priv->clk_mult); + + table = kmalloc_array(priv->max_freqs + 1, sizeof(*table), GFP_KERNEL); + if (!table) + return ERR_PTR(-ENOMEM); + + for (i = 0; i < priv->max_freqs; i++) { + table[i].frequency = cpu_freq / (1 << i); + table[i].driver_data = i; + } + table[i].frequency = CPUFREQ_TABLE_END; + + return table; +} + +static unsigned int bmips_cpufreq_get(unsigned int cpu) +{ + unsigned int div; + uint32_t mode; + + switch (priv->bmips_type) { + case BMIPS5200: + case BMIPS5000: + mode = read_c0_brcm_mode(); + div = ((mode >> BMIPS5_CLK_DIV_SHIFT) & BMIPS5_CLK_DIV_MASK); + break; + default: + div = 0; + } + + return htp_freq_to_cpu_freq(priv->clk_mult) / (1 << div); +} + +static int bmips_cpufreq_target_index(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int div = policy->freq_table[index].driver_data; + + switch (priv->bmips_type) { + case BMIPS5200: + case BMIPS5000: + change_c0_brcm_mode(BMIPS5_CLK_DIV_MASK << BMIPS5_CLK_DIV_SHIFT, + (1 << BMIPS5_CLK_DIV_SET_SHIFT) | + (div << BMIPS5_CLK_DIV_SHIFT)); + break; + default: + return -ENOTSUPP; + } + + return 0; +} + +static int bmips_cpufreq_exit(struct cpufreq_policy *policy) +{ + kfree(policy->freq_table); + + return 0; +} + +static int bmips_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_table; + + freq_table = bmips_cpufreq_get_freq_table(policy); + if (IS_ERR(freq_table)) { + pr_err("%s: couldn't determine frequency table (%ld).\n", + BMIPS_CPUFREQ_NAME, PTR_ERR(freq_table)); + return PTR_ERR(freq_table); + } + + cpufreq_generic_init(policy, freq_table, TRANSITION_LATENCY); + pr_info("%s: registered\n", BMIPS_CPUFREQ_NAME); + + return 0; +} + +static struct cpufreq_driver bmips_cpufreq_driver = { + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = bmips_cpufreq_target_index, + .get = bmips_cpufreq_get, + .init = bmips_cpufreq_init, + .exit = bmips_cpufreq_exit, + .attr = cpufreq_generic_attr, + .name = BMIPS_CPUFREQ_PREFIX, +}; + +static int __init bmips_cpufreq_driver_init(void) +{ + struct cpufreq_compat *cc; + struct device_node *np; + + for (cc = bmips_cpufreq_compat; cc->compatible; cc++) { + np = of_find_compatible_node(NULL, "cpu", cc->compatible); + if (np) { + of_node_put(np); + priv = cc; + break; + } + } + + /* We hit the guard element of the array. No compatible CPU found. */ + if (!cc->compatible) + return -ENODEV; + + return cpufreq_register_driver(&bmips_cpufreq_driver); +} +module_init(bmips_cpufreq_driver_init); + +static void __exit bmips_cpufreq_driver_exit(void) +{ + cpufreq_unregister_driver(&bmips_cpufreq_driver); +} +module_exit(bmips_cpufreq_driver_exit); + +MODULE_AUTHOR("Markus Mayer "); +MODULE_DESCRIPTION("CPUfreq driver for Broadcom BMIPS SoCs"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3