From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpufreq/cpufreq_ondemand.c | 486 +++++++++++++++++++++++++++++++++++++ 1 file changed, 486 insertions(+) create mode 100644 drivers/cpufreq/cpufreq_ondemand.c (limited to 'drivers/cpufreq/cpufreq_ondemand.c') diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c new file mode 100644 index 000000000..c52d19d67 --- /dev/null +++ b/drivers/cpufreq/cpufreq_ondemand.c @@ -0,0 +1,486 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * drivers/cpufreq/cpufreq_ondemand.c + * + * Copyright (C) 2001 Russell King + * (C) 2003 Venkatesh Pallipadi . + * Jun Nakajima + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include + +#include "cpufreq_ondemand.h" + +/* On-demand governor macros */ +#define DEF_FREQUENCY_UP_THRESHOLD (80) +#define DEF_SAMPLING_DOWN_FACTOR (1) +#define MAX_SAMPLING_DOWN_FACTOR (100000) +#define MICRO_FREQUENCY_UP_THRESHOLD (95) +#define MICRO_FREQUENCY_MIN_SAMPLE_RATE (10000) +#define MIN_FREQUENCY_UP_THRESHOLD (1) +#define MAX_FREQUENCY_UP_THRESHOLD (100) + +static struct od_ops od_ops; + +static unsigned int default_powersave_bias; + +/* + * Not all CPUs want IO time to be accounted as busy; this depends on how + * efficient idling at a higher frequency/voltage is. + * Pavel Machek says this is not so for various generations of AMD and old + * Intel systems. + * Mike Chan (android.com) claims this is also not true for ARM. + * Because of this, whitelist specific known (series) of CPUs by default, and + * leave all others up to the user. + */ +static int should_io_be_busy(void) +{ +#if defined(CONFIG_X86) + /* + * For Intel, Core 2 (model 15) and later have an efficient idle. + */ + if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL && + boot_cpu_data.x86 == 6 && + boot_cpu_data.x86_model >= 15) + return 1; +#endif + return 0; +} + +/* + * Find right freq to be set now with powersave_bias on. + * Returns the freq_hi to be used right now and will set freq_hi_delay_us, + * freq_lo, and freq_lo_delay_us in percpu area for averaging freqs. + */ +static unsigned int generic_powersave_bias_target(struct cpufreq_policy *policy, + unsigned int freq_next, unsigned int relation) +{ + unsigned int freq_req, freq_reduc, freq_avg; + unsigned int freq_hi, freq_lo; + unsigned int index; + unsigned int delay_hi_us; + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + struct cpufreq_frequency_table *freq_table = policy->freq_table; + + if (!freq_table) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_delay_us = 0; + return freq_next; + } + + index = cpufreq_frequency_table_target(policy, freq_next, relation); + freq_req = freq_table[index].frequency; + freq_reduc = freq_req * od_tuners->powersave_bias / 1000; + freq_avg = freq_req - freq_reduc; + + /* Find freq bounds for freq_avg in freq_table */ + index = cpufreq_table_find_index_h(policy, freq_avg, + relation & CPUFREQ_RELATION_E); + freq_lo = freq_table[index].frequency; + index = cpufreq_table_find_index_l(policy, freq_avg, + relation & CPUFREQ_RELATION_E); + freq_hi = freq_table[index].frequency; + + /* Find out how long we have to be in hi and lo freqs */ + if (freq_hi == freq_lo) { + dbs_info->freq_lo = 0; + dbs_info->freq_lo_delay_us = 0; + return freq_lo; + } + delay_hi_us = (freq_avg - freq_lo) * dbs_data->sampling_rate; + delay_hi_us += (freq_hi - freq_lo) / 2; + delay_hi_us /= freq_hi - freq_lo; + dbs_info->freq_hi_delay_us = delay_hi_us; + dbs_info->freq_lo = freq_lo; + dbs_info->freq_lo_delay_us = dbs_data->sampling_rate - delay_hi_us; + return freq_hi; +} + +static void ondemand_powersave_bias_init(struct cpufreq_policy *policy) +{ + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); + + dbs_info->freq_lo = 0; +} + +static void dbs_freq_increase(struct cpufreq_policy *policy, unsigned int freq) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + + if (od_tuners->powersave_bias) + freq = od_ops.powersave_bias_target(policy, freq, + CPUFREQ_RELATION_HE); + else if (policy->cur == policy->max) + return; + + __cpufreq_driver_target(policy, freq, od_tuners->powersave_bias ? + CPUFREQ_RELATION_LE : CPUFREQ_RELATION_HE); +} + +/* + * Every sampling_rate, we check, if current idle time is less than 20% + * (default), then we try to increase frequency. Else, we adjust the frequency + * proportional to load. + */ +static void od_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + unsigned int load = dbs_update(policy); + + dbs_info->freq_lo = 0; + + /* Check for frequency increase */ + if (load > dbs_data->up_threshold) { + /* If switching to max speed, apply sampling_down_factor */ + if (policy->cur < policy->max) + policy_dbs->rate_mult = dbs_data->sampling_down_factor; + dbs_freq_increase(policy, policy->max); + } else { + /* Calculate the next frequency proportional to load */ + unsigned int freq_next, min_f, max_f; + + min_f = policy->cpuinfo.min_freq; + max_f = policy->cpuinfo.max_freq; + freq_next = min_f + load * (max_f - min_f) / 100; + + /* No longer fully busy, reset rate_mult */ + policy_dbs->rate_mult = 1; + + if (od_tuners->powersave_bias) + freq_next = od_ops.powersave_bias_target(policy, + freq_next, + CPUFREQ_RELATION_LE); + + __cpufreq_driver_target(policy, freq_next, CPUFREQ_RELATION_CE); + } +} + +static unsigned int od_dbs_update(struct cpufreq_policy *policy) +{ + struct policy_dbs_info *policy_dbs = policy->governor_data; + struct dbs_data *dbs_data = policy_dbs->dbs_data; + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy_dbs); + int sample_type = dbs_info->sample_type; + + /* Common NORMAL_SAMPLE setup */ + dbs_info->sample_type = OD_NORMAL_SAMPLE; + /* + * OD_SUB_SAMPLE doesn't make sense if sample_delay_ns is 0, so ignore + * it then. + */ + if (sample_type == OD_SUB_SAMPLE && policy_dbs->sample_delay_ns > 0) { + __cpufreq_driver_target(policy, dbs_info->freq_lo, + CPUFREQ_RELATION_HE); + return dbs_info->freq_lo_delay_us; + } + + od_update(policy); + + if (dbs_info->freq_lo) { + /* Setup SUB_SAMPLE */ + dbs_info->sample_type = OD_SUB_SAMPLE; + return dbs_info->freq_hi_delay_us; + } + + return dbs_data->sampling_rate * policy_dbs->rate_mult; +} + +/************************** sysfs interface ************************/ +static struct dbs_governor od_dbs_gov; + +static ssize_t io_is_busy_store(struct gov_attr_set *attr_set, const char *buf, + size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + dbs_data->io_is_busy = !!input; + + /* we need to re-evaluate prev_cpu_idle */ + gov_update_cpu_data(dbs_data); + + return count; +} + +static ssize_t up_threshold_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_FREQUENCY_UP_THRESHOLD || + input < MIN_FREQUENCY_UP_THRESHOLD) { + return -EINVAL; + } + + dbs_data->up_threshold = input; + return count; +} + +static ssize_t sampling_down_factor_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct policy_dbs_info *policy_dbs; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1 || input > MAX_SAMPLING_DOWN_FACTOR || input < 1) + return -EINVAL; + + dbs_data->sampling_down_factor = input; + + /* Reset down sampling multiplier in case it was active */ + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) { + /* + * Doing this without locking might lead to using different + * rate_mult values in od_update() and od_dbs_update(). + */ + mutex_lock(&policy_dbs->update_mutex); + policy_dbs->rate_mult = 1; + mutex_unlock(&policy_dbs->update_mutex); + } + + return count; +} + +static ssize_t ignore_nice_load_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + unsigned int input; + int ret; + + ret = sscanf(buf, "%u", &input); + if (ret != 1) + return -EINVAL; + + if (input > 1) + input = 1; + + if (input == dbs_data->ignore_nice_load) { /* nothing to do */ + return count; + } + dbs_data->ignore_nice_load = input; + + /* we need to re-evaluate prev_cpu_idle */ + gov_update_cpu_data(dbs_data); + + return count; +} + +static ssize_t powersave_bias_store(struct gov_attr_set *attr_set, + const char *buf, size_t count) +{ + struct dbs_data *dbs_data = to_dbs_data(attr_set); + struct od_dbs_tuners *od_tuners = dbs_data->tuners; + struct policy_dbs_info *policy_dbs; + unsigned int input; + int ret; + ret = sscanf(buf, "%u", &input); + + if (ret != 1) + return -EINVAL; + + if (input > 1000) + input = 1000; + + od_tuners->powersave_bias = input; + + list_for_each_entry(policy_dbs, &attr_set->policy_list, list) + ondemand_powersave_bias_init(policy_dbs->policy); + + return count; +} + +gov_show_one_common(sampling_rate); +gov_show_one_common(up_threshold); +gov_show_one_common(sampling_down_factor); +gov_show_one_common(ignore_nice_load); +gov_show_one_common(io_is_busy); +gov_show_one(od, powersave_bias); + +gov_attr_rw(sampling_rate); +gov_attr_rw(io_is_busy); +gov_attr_rw(up_threshold); +gov_attr_rw(sampling_down_factor); +gov_attr_rw(ignore_nice_load); +gov_attr_rw(powersave_bias); + +static struct attribute *od_attrs[] = { + &sampling_rate.attr, + &up_threshold.attr, + &sampling_down_factor.attr, + &ignore_nice_load.attr, + &powersave_bias.attr, + &io_is_busy.attr, + NULL +}; +ATTRIBUTE_GROUPS(od); + +/************************** sysfs end ************************/ + +static struct policy_dbs_info *od_alloc(void) +{ + struct od_policy_dbs_info *dbs_info; + + dbs_info = kzalloc(sizeof(*dbs_info), GFP_KERNEL); + return dbs_info ? &dbs_info->policy_dbs : NULL; +} + +static void od_free(struct policy_dbs_info *policy_dbs) +{ + kfree(to_dbs_info(policy_dbs)); +} + +static int od_init(struct dbs_data *dbs_data) +{ + struct od_dbs_tuners *tuners; + u64 idle_time; + int cpu; + + tuners = kzalloc(sizeof(*tuners), GFP_KERNEL); + if (!tuners) + return -ENOMEM; + + cpu = get_cpu(); + idle_time = get_cpu_idle_time_us(cpu, NULL); + put_cpu(); + if (idle_time != -1ULL) { + /* Idle micro accounting is supported. Use finer thresholds */ + dbs_data->up_threshold = MICRO_FREQUENCY_UP_THRESHOLD; + } else { + dbs_data->up_threshold = DEF_FREQUENCY_UP_THRESHOLD; + } + + dbs_data->sampling_down_factor = DEF_SAMPLING_DOWN_FACTOR; + dbs_data->ignore_nice_load = 0; + tuners->powersave_bias = default_powersave_bias; + dbs_data->io_is_busy = should_io_be_busy(); + + dbs_data->tuners = tuners; + return 0; +} + +static void od_exit(struct dbs_data *dbs_data) +{ + kfree(dbs_data->tuners); +} + +static void od_start(struct cpufreq_policy *policy) +{ + struct od_policy_dbs_info *dbs_info = to_dbs_info(policy->governor_data); + + dbs_info->sample_type = OD_NORMAL_SAMPLE; + ondemand_powersave_bias_init(policy); +} + +static struct od_ops od_ops = { + .powersave_bias_target = generic_powersave_bias_target, +}; + +static struct dbs_governor od_dbs_gov = { + .gov = CPUFREQ_DBS_GOVERNOR_INITIALIZER("ondemand"), + .kobj_type = { .default_groups = od_groups }, + .gov_dbs_update = od_dbs_update, + .alloc = od_alloc, + .free = od_free, + .init = od_init, + .exit = od_exit, + .start = od_start, +}; + +#define CPU_FREQ_GOV_ONDEMAND (od_dbs_gov.gov) + +static void od_set_powersave_bias(unsigned int powersave_bias) +{ + unsigned int cpu; + cpumask_var_t done; + + if (!alloc_cpumask_var(&done, GFP_KERNEL)) + return; + + default_powersave_bias = powersave_bias; + cpumask_clear(done); + + cpus_read_lock(); + for_each_online_cpu(cpu) { + struct cpufreq_policy *policy; + struct policy_dbs_info *policy_dbs; + struct dbs_data *dbs_data; + struct od_dbs_tuners *od_tuners; + + if (cpumask_test_cpu(cpu, done)) + continue; + + policy = cpufreq_cpu_get_raw(cpu); + if (!policy || policy->governor != &CPU_FREQ_GOV_ONDEMAND) + continue; + + policy_dbs = policy->governor_data; + if (!policy_dbs) + continue; + + cpumask_or(done, done, policy->cpus); + + dbs_data = policy_dbs->dbs_data; + od_tuners = dbs_data->tuners; + od_tuners->powersave_bias = default_powersave_bias; + } + cpus_read_unlock(); + + free_cpumask_var(done); +} + +void od_register_powersave_bias_handler(unsigned int (*f) + (struct cpufreq_policy *, unsigned int, unsigned int), + unsigned int powersave_bias) +{ + od_ops.powersave_bias_target = f; + od_set_powersave_bias(powersave_bias); +} +EXPORT_SYMBOL_GPL(od_register_powersave_bias_handler); + +void od_unregister_powersave_bias_handler(void) +{ + od_ops.powersave_bias_target = generic_powersave_bias_target; + od_set_powersave_bias(0); +} +EXPORT_SYMBOL_GPL(od_unregister_powersave_bias_handler); + +MODULE_AUTHOR("Venkatesh Pallipadi "); +MODULE_AUTHOR("Alexey Starikovskiy "); +MODULE_DESCRIPTION("'cpufreq_ondemand' - A dynamic cpufreq governor for " + "Low Latency Frequency Transition capable processors"); +MODULE_LICENSE("GPL"); + +#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND +struct cpufreq_governor *cpufreq_default_governor(void) +{ + return &CPU_FREQ_GOV_ONDEMAND; +} +#endif + +cpufreq_governor_init(CPU_FREQ_GOV_ONDEMAND); +cpufreq_governor_exit(CPU_FREQ_GOV_ONDEMAND); -- cgit v1.2.3