From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpufreq/elanfreq.c | 228 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 228 insertions(+) create mode 100644 drivers/cpufreq/elanfreq.c (limited to 'drivers/cpufreq/elanfreq.c') diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c new file mode 100644 index 000000000..4ce5eb35d --- /dev/null +++ b/drivers/cpufreq/elanfreq.c @@ -0,0 +1,228 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * elanfreq: cpufreq driver for the AMD ELAN family + * + * (c) Copyright 2002 Robert Schwebel + * + * Parts of this code are (c) Sven Geggus + * + * All Rights Reserved. + * + * 2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include + +#include +#include + +#include +#include +#include +#include + +#define REG_CSCIR 0x22 /* Chip Setup and Control Index Register */ +#define REG_CSCDR 0x23 /* Chip Setup and Control Data Register */ + +/* Module parameter */ +static int max_freq; + +struct s_elan_multiplier { + int clock; /* frequency in kHz */ + int val40h; /* PMU Force Mode register */ + int val80h; /* CPU Clock Speed Register */ +}; + +/* + * It is important that the frequencies + * are listed in ascending order here! + */ +static struct s_elan_multiplier elan_multiplier[] = { + {1000, 0x02, 0x18}, + {2000, 0x02, 0x10}, + {4000, 0x02, 0x08}, + {8000, 0x00, 0x00}, + {16000, 0x00, 0x02}, + {33000, 0x00, 0x04}, + {66000, 0x01, 0x04}, + {99000, 0x01, 0x05} +}; + +static struct cpufreq_frequency_table elanfreq_table[] = { + {0, 0, 1000}, + {0, 1, 2000}, + {0, 2, 4000}, + {0, 3, 8000}, + {0, 4, 16000}, + {0, 5, 33000}, + {0, 6, 66000}, + {0, 7, 99000}, + {0, 0, CPUFREQ_TABLE_END}, +}; + + +/** + * elanfreq_get_cpu_frequency: determine current cpu speed + * + * Finds out at which frequency the CPU of the Elan SOC runs + * at the moment. Frequencies from 1 to 33 MHz are generated + * the normal way, 66 and 99 MHz are called "Hyperspeed Mode" + * and have the rest of the chip running with 33 MHz. + */ + +static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu) +{ + u8 clockspeed_reg; /* Clock Speed Register */ + + local_irq_disable(); + outb_p(0x80, REG_CSCIR); + clockspeed_reg = inb_p(REG_CSCDR); + local_irq_enable(); + + if ((clockspeed_reg & 0xE0) == 0xE0) + return 0; + + /* Are we in CPU clock multiplied mode (66/99 MHz)? */ + if ((clockspeed_reg & 0xE0) == 0xC0) { + if ((clockspeed_reg & 0x01) == 0) + return 66000; + else + return 99000; + } + + /* 33 MHz is not 32 MHz... */ + if ((clockspeed_reg & 0xE0) == 0xA0) + return 33000; + + return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000; +} + + +static int elanfreq_target(struct cpufreq_policy *policy, + unsigned int state) +{ + /* + * Access to the Elan's internal registers is indexed via + * 0x22: Chip Setup & Control Register Index Register (CSCI) + * 0x23: Chip Setup & Control Register Data Register (CSCD) + * + */ + + /* + * 0x40 is the Power Management Unit's Force Mode Register. + * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency) + */ + + local_irq_disable(); + outb_p(0x40, REG_CSCIR); /* Disable hyperspeed mode */ + outb_p(0x00, REG_CSCDR); + local_irq_enable(); /* wait till internal pipelines and */ + udelay(1000); /* buffers have cleaned up */ + + local_irq_disable(); + + /* now, set the CPU clock speed register (0x80) */ + outb_p(0x80, REG_CSCIR); + outb_p(elan_multiplier[state].val80h, REG_CSCDR); + + /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */ + outb_p(0x40, REG_CSCIR); + outb_p(elan_multiplier[state].val40h, REG_CSCDR); + udelay(10000); + local_irq_enable(); + + return 0; +} +/* + * Module init and exit code + */ + +static int elanfreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpuinfo_x86 *c = &cpu_data(0); + struct cpufreq_frequency_table *pos; + + /* capability check */ + if ((c->x86_vendor != X86_VENDOR_AMD) || + (c->x86 != 4) || (c->x86_model != 10)) + return -ENODEV; + + /* max freq */ + if (!max_freq) + max_freq = elanfreq_get_cpu_frequency(0); + + /* table init */ + cpufreq_for_each_entry(pos, elanfreq_table) + if (pos->frequency > max_freq) + pos->frequency = CPUFREQ_ENTRY_INVALID; + + policy->freq_table = elanfreq_table; + return 0; +} + + +#ifndef MODULE +/** + * elanfreq_setup - elanfreq command line parameter parsing + * + * elanfreq command line parameter. Use: + * elanfreq=66000 + * to set the maximum CPU frequency to 66 MHz. Note that in + * case you do not give this boot parameter, the maximum + * frequency will fall back to _current_ CPU frequency which + * might be lower. If you build this as a module, use the + * max_freq module parameter instead. + */ +static int __init elanfreq_setup(char *str) +{ + max_freq = simple_strtoul(str, &str, 0); + pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n"); + return 1; +} +__setup("elanfreq=", elanfreq_setup); +#endif + + +static struct cpufreq_driver elanfreq_driver = { + .get = elanfreq_get_cpu_frequency, + .flags = CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = elanfreq_target, + .init = elanfreq_cpu_init, + .name = "elanfreq", + .attr = cpufreq_generic_attr, +}; + +static const struct x86_cpu_id elan_id[] = { + X86_MATCH_VENDOR_FAM_MODEL(AMD, 4, 10, NULL), + {} +}; +MODULE_DEVICE_TABLE(x86cpu, elan_id); + +static int __init elanfreq_init(void) +{ + if (!x86_match_cpu(elan_id)) + return -ENODEV; + return cpufreq_register_driver(&elanfreq_driver); +} + + +static void __exit elanfreq_exit(void) +{ + cpufreq_unregister_driver(&elanfreq_driver); +} + + +module_param(max_freq, int, 0444); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Robert Schwebel , " + "Sven Geggus "); +MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs"); + +module_init(elanfreq_init); +module_exit(elanfreq_exit); -- cgit v1.2.3