From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpufreq/pasemi-cpufreq.c | 275 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 275 insertions(+) create mode 100644 drivers/cpufreq/pasemi-cpufreq.c (limited to 'drivers/cpufreq/pasemi-cpufreq.c') diff --git a/drivers/cpufreq/pasemi-cpufreq.c b/drivers/cpufreq/pasemi-cpufreq.c new file mode 100644 index 000000000..039a66bbe --- /dev/null +++ b/drivers/cpufreq/pasemi-cpufreq.c @@ -0,0 +1,275 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Copyright (C) 2007 PA Semi, Inc + * + * Authors: Egor Martovetsky + * Olof Johansson + * + * Maintained by: Olof Johansson + * + * Based on arch/powerpc/platforms/cell/cbe_cpufreq.c: + * (C) Copyright IBM Deutschland Entwicklung GmbH 2005 + */ + +#include +#include +#include +#include + +#include +#include +#include +#include + +#include + +#define SDCASR_REG 0x0100 +#define SDCASR_REG_STRIDE 0x1000 +#define SDCPWR_CFGA0_REG 0x0100 +#define SDCPWR_PWST0_REG 0x0000 +#define SDCPWR_GIZTIME_REG 0x0440 + +/* SDCPWR_GIZTIME_REG fields */ +#define SDCPWR_GIZTIME_GR 0x80000000 +#define SDCPWR_GIZTIME_LONGLOCK 0x000000ff + +/* Offset of ASR registers from SDC base */ +#define SDCASR_OFFSET 0x120000 + +static void __iomem *sdcpwr_mapbase; +static void __iomem *sdcasr_mapbase; + +/* Current astate, is used when waking up from power savings on + * one core, in case the other core has switched states during + * the idle time. + */ +static int current_astate; + +/* We support 5(A0-A4) power states excluding turbo(A5-A6) modes */ +static struct cpufreq_frequency_table pas_freqs[] = { + {0, 0, 0}, + {0, 1, 0}, + {0, 2, 0}, + {0, 3, 0}, + {0, 4, 0}, + {0, 0, CPUFREQ_TABLE_END}, +}; + +/* + * hardware specific functions + */ + +static int get_astate_freq(int astate) +{ + u32 ret; + ret = in_le32(sdcpwr_mapbase + SDCPWR_CFGA0_REG + (astate * 0x10)); + + return ret & 0x3f; +} + +static int get_cur_astate(int cpu) +{ + u32 ret; + + ret = in_le32(sdcpwr_mapbase + SDCPWR_PWST0_REG); + ret = (ret >> (cpu * 4)) & 0x7; + + return ret; +} + +static int get_gizmo_latency(void) +{ + u32 giztime, ret; + + giztime = in_le32(sdcpwr_mapbase + SDCPWR_GIZTIME_REG); + + /* just provide the upper bound */ + if (giztime & SDCPWR_GIZTIME_GR) + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 128000; + else + ret = (giztime & SDCPWR_GIZTIME_LONGLOCK) * 1000; + + return ret; +} + +static void set_astate(int cpu, unsigned int astate) +{ + unsigned long flags; + + /* Return if called before init has run */ + if (unlikely(!sdcasr_mapbase)) + return; + + local_irq_save(flags); + + out_le32(sdcasr_mapbase + SDCASR_REG + SDCASR_REG_STRIDE*cpu, astate); + + local_irq_restore(flags); +} + +int check_astate(void) +{ + return get_cur_astate(hard_smp_processor_id()); +} + +void restore_astate(int cpu) +{ + set_astate(cpu, current_astate); +} + +/* + * cpufreq functions + */ + +static int pas_cpufreq_cpu_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *pos; + const u32 *max_freqp; + u32 max_freq; + int cur_astate, idx; + struct resource res; + struct device_node *cpu, *dn; + int err = -ENODEV; + + cpu = of_get_cpu_node(policy->cpu, NULL); + if (!cpu) + goto out; + + max_freqp = of_get_property(cpu, "clock-frequency", NULL); + of_node_put(cpu); + if (!max_freqp) { + err = -EINVAL; + goto out; + } + + /* we need the freq in kHz */ + max_freq = *max_freqp / 1000; + + dn = of_find_compatible_node(NULL, NULL, "1682m-sdc"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-sdc"); + if (!dn) + goto out; + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out; + sdcasr_mapbase = ioremap(res.start + SDCASR_OFFSET, 0x2000); + if (!sdcasr_mapbase) { + err = -EINVAL; + goto out; + } + + dn = of_find_compatible_node(NULL, NULL, "1682m-gizmo"); + if (!dn) + dn = of_find_compatible_node(NULL, NULL, + "pasemi,pwrficient-gizmo"); + if (!dn) { + err = -ENODEV; + goto out_unmap_sdcasr; + } + err = of_address_to_resource(dn, 0, &res); + of_node_put(dn); + if (err) + goto out_unmap_sdcasr; + sdcpwr_mapbase = ioremap(res.start, 0x1000); + if (!sdcpwr_mapbase) { + err = -EINVAL; + goto out_unmap_sdcasr; + } + + pr_debug("init cpufreq on CPU %d\n", policy->cpu); + pr_debug("max clock-frequency is at %u kHz\n", max_freq); + pr_debug("initializing frequency table\n"); + + /* initialize frequency table */ + cpufreq_for_each_entry_idx(pos, pas_freqs, idx) { + pos->frequency = get_astate_freq(pos->driver_data) * 100000; + pr_debug("%d: %d\n", idx, pos->frequency); + } + + cur_astate = get_cur_astate(policy->cpu); + pr_debug("current astate is at %d\n",cur_astate); + + policy->cur = pas_freqs[cur_astate].frequency; + ppc_proc_freq = policy->cur * 1000ul; + + cpufreq_generic_init(policy, pas_freqs, get_gizmo_latency()); + return 0; + +out_unmap_sdcasr: + iounmap(sdcasr_mapbase); +out: + return err; +} + +static int pas_cpufreq_cpu_exit(struct cpufreq_policy *policy) +{ + /* + * We don't support CPU hotplug. Don't unmap after the system + * has already made it to a running state. + */ + if (system_state >= SYSTEM_RUNNING) + return 0; + + if (sdcasr_mapbase) + iounmap(sdcasr_mapbase); + if (sdcpwr_mapbase) + iounmap(sdcpwr_mapbase); + + return 0; +} + +static int pas_cpufreq_target(struct cpufreq_policy *policy, + unsigned int pas_astate_new) +{ + int i; + + pr_debug("setting frequency for cpu %d to %d kHz, 1/%d of max frequency\n", + policy->cpu, + pas_freqs[pas_astate_new].frequency, + pas_freqs[pas_astate_new].driver_data); + + current_astate = pas_astate_new; + + for_each_online_cpu(i) + set_astate(i, pas_astate_new); + + ppc_proc_freq = pas_freqs[pas_astate_new].frequency * 1000ul; + return 0; +} + +static struct cpufreq_driver pas_cpufreq_driver = { + .name = "pas-cpufreq", + .flags = CPUFREQ_CONST_LOOPS, + .init = pas_cpufreq_cpu_init, + .exit = pas_cpufreq_cpu_exit, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = pas_cpufreq_target, + .attr = cpufreq_generic_attr, +}; + +/* + * module init and destoy + */ + +static int __init pas_cpufreq_init(void) +{ + if (!of_machine_is_compatible("PA6T-1682M") && + !of_machine_is_compatible("pasemi,pwrficient")) + return -ENODEV; + + return cpufreq_register_driver(&pas_cpufreq_driver); +} + +static void __exit pas_cpufreq_exit(void) +{ + cpufreq_unregister_driver(&pas_cpufreq_driver); +} + +module_init(pas_cpufreq_init); +module_exit(pas_cpufreq_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Egor Martovetsky , Olof Johansson "); -- cgit v1.2.3