From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpufreq/ti-cpufreq.c | 461 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 461 insertions(+) create mode 100644 drivers/cpufreq/ti-cpufreq.c (limited to 'drivers/cpufreq/ti-cpufreq.c') diff --git a/drivers/cpufreq/ti-cpufreq.c b/drivers/cpufreq/ti-cpufreq.c new file mode 100644 index 000000000..be4209d97 --- /dev/null +++ b/drivers/cpufreq/ti-cpufreq.c @@ -0,0 +1,461 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * TI CPUFreq/OPP hw-supported driver + * + * Copyright (C) 2016-2017 Texas Instruments, Inc. + * Dave Gerlach + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define REVISION_MASK 0xF +#define REVISION_SHIFT 28 + +#define AM33XX_800M_ARM_MPU_MAX_FREQ 0x1E2F +#define AM43XX_600M_ARM_MPU_MAX_FREQ 0xFFA + +#define DRA7_EFUSE_HAS_OD_MPU_OPP 11 +#define DRA7_EFUSE_HAS_HIGH_MPU_OPP 15 +#define DRA76_EFUSE_HAS_PLUS_MPU_OPP 18 +#define DRA7_EFUSE_HAS_ALL_MPU_OPP 23 +#define DRA76_EFUSE_HAS_ALL_MPU_OPP 24 + +#define DRA7_EFUSE_NOM_MPU_OPP BIT(0) +#define DRA7_EFUSE_OD_MPU_OPP BIT(1) +#define DRA7_EFUSE_HIGH_MPU_OPP BIT(2) +#define DRA76_EFUSE_PLUS_MPU_OPP BIT(3) + +#define OMAP3_CONTROL_DEVICE_STATUS 0x4800244C +#define OMAP3_CONTROL_IDCODE 0x4830A204 +#define OMAP34xx_ProdID_SKUID 0x4830A20C +#define OMAP3_SYSCON_BASE (0x48000000 + 0x2000 + 0x270) + +#define AM625_EFUSE_K_MPU_OPP 11 +#define AM625_EFUSE_S_MPU_OPP 19 +#define AM625_EFUSE_T_MPU_OPP 20 + +#define AM625_SUPPORT_K_MPU_OPP BIT(0) +#define AM625_SUPPORT_S_MPU_OPP BIT(1) +#define AM625_SUPPORT_T_MPU_OPP BIT(2) + +#define VERSION_COUNT 2 + +struct ti_cpufreq_data; + +struct ti_cpufreq_soc_data { + const char * const *reg_names; + unsigned long (*efuse_xlate)(struct ti_cpufreq_data *opp_data, + unsigned long efuse); + unsigned long efuse_fallback; + unsigned long efuse_offset; + unsigned long efuse_mask; + unsigned long efuse_shift; + unsigned long rev_offset; + bool multi_regulator; +}; + +struct ti_cpufreq_data { + struct device *cpu_dev; + struct device_node *opp_node; + struct regmap *syscon; + const struct ti_cpufreq_soc_data *soc_data; +}; + +static unsigned long amx3_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + if (!efuse) + efuse = opp_data->soc_data->efuse_fallback; + /* AM335x and AM437x use "OPP disable" bits, so invert */ + return ~efuse; +} + +static unsigned long dra7_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + unsigned long calculated_efuse = DRA7_EFUSE_NOM_MPU_OPP; + + /* + * The efuse on dra7 and am57 parts contains a specific + * value indicating the highest available OPP. + */ + + switch (efuse) { + case DRA76_EFUSE_HAS_PLUS_MPU_OPP: + case DRA76_EFUSE_HAS_ALL_MPU_OPP: + calculated_efuse |= DRA76_EFUSE_PLUS_MPU_OPP; + fallthrough; + case DRA7_EFUSE_HAS_ALL_MPU_OPP: + case DRA7_EFUSE_HAS_HIGH_MPU_OPP: + calculated_efuse |= DRA7_EFUSE_HIGH_MPU_OPP; + fallthrough; + case DRA7_EFUSE_HAS_OD_MPU_OPP: + calculated_efuse |= DRA7_EFUSE_OD_MPU_OPP; + } + + return calculated_efuse; +} + +static unsigned long omap3_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + /* OPP enable bit ("Speed Binned") */ + return BIT(efuse); +} + +static unsigned long am625_efuse_xlate(struct ti_cpufreq_data *opp_data, + unsigned long efuse) +{ + unsigned long calculated_efuse = AM625_SUPPORT_K_MPU_OPP; + + switch (efuse) { + case AM625_EFUSE_T_MPU_OPP: + calculated_efuse |= AM625_SUPPORT_T_MPU_OPP; + fallthrough; + case AM625_EFUSE_S_MPU_OPP: + calculated_efuse |= AM625_SUPPORT_S_MPU_OPP; + fallthrough; + case AM625_EFUSE_K_MPU_OPP: + calculated_efuse |= AM625_SUPPORT_K_MPU_OPP; + } + + return calculated_efuse; +} + +static struct ti_cpufreq_soc_data am3x_soc_data = { + .efuse_xlate = amx3_efuse_xlate, + .efuse_fallback = AM33XX_800M_ARM_MPU_MAX_FREQ, + .efuse_offset = 0x07fc, + .efuse_mask = 0x1fff, + .rev_offset = 0x600, + .multi_regulator = false, +}; + +static struct ti_cpufreq_soc_data am4x_soc_data = { + .efuse_xlate = amx3_efuse_xlate, + .efuse_fallback = AM43XX_600M_ARM_MPU_MAX_FREQ, + .efuse_offset = 0x0610, + .efuse_mask = 0x3f, + .rev_offset = 0x600, + .multi_regulator = false, +}; + +static struct ti_cpufreq_soc_data dra7_soc_data = { + .efuse_xlate = dra7_efuse_xlate, + .efuse_offset = 0x020c, + .efuse_mask = 0xf80000, + .efuse_shift = 19, + .rev_offset = 0x204, + .multi_regulator = true, +}; + +/* + * OMAP35x TRM (SPRUF98K): + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control OMAP Status Register 15:0 (Address 0x4800 244C) + * to separate between omap3503, omap3515, omap3525, omap3530 + * and feature presence. + * There are encodings for versions limited to 400/266MHz + * but we ignore. + * Not clear if this also holds for omap34xx. + * some eFuse values e.g. CONTROL_FUSE_OPP1_VDD1 + * are stored in the SYSCON register range + * Register 0x4830A20C [ProdID.SKUID] [0:3] + * 0x0 for normal 600/430MHz device. + * 0x8 for 720/520MHz device. + * Not clear what omap34xx value is. + */ + +static struct ti_cpufreq_soc_data omap34xx_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP34xx_ProdID_SKUID - OMAP3_SYSCON_BASE, + .efuse_shift = 3, + .efuse_mask = BIT(3), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + +/* + * AM/DM37x TRM (SPRUGN4M) + * CONTROL_IDCODE (0x4830 A204) describes Silicon revisions. + * Control Device Status Register 15:0 (Address 0x4800 244C) + * to separate between am3703, am3715, dm3725, dm3730 + * and feature presence. + * Speed Binned = Bit 9 + * 0 800/600 MHz + * 1 1000/800 MHz + * some eFuse values e.g. CONTROL_FUSE_OPP 1G_VDD1 + * are stored in the SYSCON register range. + * There is no 0x4830A20C [ProdID.SKUID] register (exists but + * seems to always read as 0). + */ + +static const char * const omap3_reg_names[] = {"cpu0", "vbb", NULL}; + +static struct ti_cpufreq_soc_data omap36xx_soc_data = { + .reg_names = omap3_reg_names, + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 9, + .efuse_mask = BIT(9), + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = true, +}; + +/* + * AM3517 is quite similar to AM/DM37x except that it has no + * high speed grade eFuse and no abb ldo + */ + +static struct ti_cpufreq_soc_data am3517_soc_data = { + .efuse_xlate = omap3_efuse_xlate, + .efuse_offset = OMAP3_CONTROL_DEVICE_STATUS - OMAP3_SYSCON_BASE, + .efuse_shift = 0, + .efuse_mask = 0, + .rev_offset = OMAP3_CONTROL_IDCODE - OMAP3_SYSCON_BASE, + .multi_regulator = false, +}; + +static struct ti_cpufreq_soc_data am625_soc_data = { + .efuse_xlate = am625_efuse_xlate, + .efuse_offset = 0x0018, + .efuse_mask = 0x07c0, + .efuse_shift = 0x6, + .rev_offset = 0x0014, + .multi_regulator = false, +}; + +/** + * ti_cpufreq_get_efuse() - Parse and return efuse value present on SoC + * @opp_data: pointer to ti_cpufreq_data context + * @efuse_value: Set to the value parsed from efuse + * + * Returns error code if efuse not read properly. + */ +static int ti_cpufreq_get_efuse(struct ti_cpufreq_data *opp_data, + u32 *efuse_value) +{ + struct device *dev = opp_data->cpu_dev; + u32 efuse; + int ret; + + ret = regmap_read(opp_data->syscon, opp_data->soc_data->efuse_offset, + &efuse); + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->efuse_offset, 4); + + if (!regs) + return -ENOMEM; + efuse = readl(regs); + iounmap(regs); + } + else if (ret) { + dev_err(dev, + "Failed to read the efuse value from syscon: %d\n", + ret); + return ret; + } + + efuse = (efuse & opp_data->soc_data->efuse_mask); + efuse >>= opp_data->soc_data->efuse_shift; + + *efuse_value = opp_data->soc_data->efuse_xlate(opp_data, efuse); + + return 0; +} + +/** + * ti_cpufreq_get_rev() - Parse and return rev value present on SoC + * @opp_data: pointer to ti_cpufreq_data context + * @revision_value: Set to the value parsed from revision register + * + * Returns error code if revision not read properly. + */ +static int ti_cpufreq_get_rev(struct ti_cpufreq_data *opp_data, + u32 *revision_value) +{ + struct device *dev = opp_data->cpu_dev; + u32 revision; + int ret; + + ret = regmap_read(opp_data->syscon, opp_data->soc_data->rev_offset, + &revision); + if (ret == -EIO) { + /* not a syscon register! */ + void __iomem *regs = ioremap(OMAP3_SYSCON_BASE + + opp_data->soc_data->rev_offset, 4); + + if (!regs) + return -ENOMEM; + revision = readl(regs); + iounmap(regs); + } + else if (ret) { + dev_err(dev, + "Failed to read the revision number from syscon: %d\n", + ret); + return ret; + } + + *revision_value = BIT((revision >> REVISION_SHIFT) & REVISION_MASK); + + return 0; +} + +static int ti_cpufreq_setup_syscon_register(struct ti_cpufreq_data *opp_data) +{ + struct device *dev = opp_data->cpu_dev; + struct device_node *np = opp_data->opp_node; + + opp_data->syscon = syscon_regmap_lookup_by_phandle(np, + "syscon"); + if (IS_ERR(opp_data->syscon)) { + dev_err(dev, + "\"syscon\" is missing, cannot use OPPv2 table.\n"); + return PTR_ERR(opp_data->syscon); + } + + return 0; +} + +static const struct of_device_id ti_cpufreq_of_match[] = { + { .compatible = "ti,am33xx", .data = &am3x_soc_data, }, + { .compatible = "ti,am3517", .data = &am3517_soc_data, }, + { .compatible = "ti,am43", .data = &am4x_soc_data, }, + { .compatible = "ti,dra7", .data = &dra7_soc_data }, + { .compatible = "ti,omap34xx", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap36xx", .data = &omap36xx_soc_data, }, + { .compatible = "ti,am625", .data = &am625_soc_data, }, + /* legacy */ + { .compatible = "ti,omap3430", .data = &omap34xx_soc_data, }, + { .compatible = "ti,omap3630", .data = &omap36xx_soc_data, }, + {}, +}; + +static const struct of_device_id *ti_cpufreq_match_node(void) +{ + struct device_node *np; + const struct of_device_id *match; + + np = of_find_node_by_path("/"); + match = of_match_node(ti_cpufreq_of_match, np); + of_node_put(np); + + return match; +} + +static int ti_cpufreq_probe(struct platform_device *pdev) +{ + u32 version[VERSION_COUNT]; + const struct of_device_id *match; + struct ti_cpufreq_data *opp_data; + const char * const default_reg_names[] = {"vdd", "vbb", NULL}; + int ret; + struct dev_pm_opp_config config = { + .supported_hw = version, + .supported_hw_count = ARRAY_SIZE(version), + }; + + match = dev_get_platdata(&pdev->dev); + if (!match) + return -ENODEV; + + opp_data = devm_kzalloc(&pdev->dev, sizeof(*opp_data), GFP_KERNEL); + if (!opp_data) + return -ENOMEM; + + opp_data->soc_data = match->data; + + opp_data->cpu_dev = get_cpu_device(0); + if (!opp_data->cpu_dev) { + pr_err("%s: Failed to get device for CPU0\n", __func__); + return -ENODEV; + } + + opp_data->opp_node = dev_pm_opp_of_get_opp_desc_node(opp_data->cpu_dev); + if (!opp_data->opp_node) { + dev_info(opp_data->cpu_dev, + "OPP-v2 not supported, cpufreq-dt will attempt to use legacy tables.\n"); + goto register_cpufreq_dt; + } + + ret = ti_cpufreq_setup_syscon_register(opp_data); + if (ret) + goto fail_put_node; + + /* + * OPPs determine whether or not they are supported based on + * two metrics: + * 0 - SoC Revision + * 1 - eFuse value + */ + ret = ti_cpufreq_get_rev(opp_data, &version[0]); + if (ret) + goto fail_put_node; + + ret = ti_cpufreq_get_efuse(opp_data, &version[1]); + if (ret) + goto fail_put_node; + + if (opp_data->soc_data->multi_regulator) { + if (opp_data->soc_data->reg_names) + config.regulator_names = opp_data->soc_data->reg_names; + else + config.regulator_names = default_reg_names; + } + + ret = dev_pm_opp_set_config(opp_data->cpu_dev, &config); + if (ret < 0) { + dev_err(opp_data->cpu_dev, "Failed to set OPP config\n"); + goto fail_put_node; + } + + of_node_put(opp_data->opp_node); + +register_cpufreq_dt: + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + + return 0; + +fail_put_node: + of_node_put(opp_data->opp_node); + + return ret; +} + +static int __init ti_cpufreq_init(void) +{ + const struct of_device_id *match; + + /* Check to ensure we are on a compatible platform */ + match = ti_cpufreq_match_node(); + if (match) + platform_device_register_data(NULL, "ti-cpufreq", -1, match, + sizeof(*match)); + + return 0; +} +module_init(ti_cpufreq_init); + +static struct platform_driver ti_cpufreq_driver = { + .probe = ti_cpufreq_probe, + .driver = { + .name = "ti-cpufreq", + }, +}; +builtin_platform_driver(ti_cpufreq_driver); + +MODULE_DESCRIPTION("TI CPUFreq/OPP hw-supported driver"); +MODULE_AUTHOR("Dave Gerlach "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3