From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cpuidle/cpuidle-psci-domain.c | 215 ++++++++++++++++++++++++++++++++++ 1 file changed, 215 insertions(+) create mode 100644 drivers/cpuidle/cpuidle-psci-domain.c (limited to 'drivers/cpuidle/cpuidle-psci-domain.c') diff --git a/drivers/cpuidle/cpuidle-psci-domain.c b/drivers/cpuidle/cpuidle-psci-domain.c new file mode 100644 index 000000000..6ad295494 --- /dev/null +++ b/drivers/cpuidle/cpuidle-psci-domain.c @@ -0,0 +1,215 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * PM domains for CPUs via genpd - managed by cpuidle-psci. + * + * Copyright (C) 2019 Linaro Ltd. + * Author: Ulf Hansson + * + */ + +#define pr_fmt(fmt) "CPUidle PSCI: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cpuidle-psci.h" + +struct psci_pd_provider { + struct list_head link; + struct device_node *node; +}; + +static LIST_HEAD(psci_pd_providers); +static bool psci_pd_allow_domain_state; + +static int psci_pd_power_off(struct generic_pm_domain *pd) +{ + struct genpd_power_state *state = &pd->states[pd->state_idx]; + u32 *pd_state; + + if (!state->data) + return 0; + + if (!psci_pd_allow_domain_state) + return -EBUSY; + + /* OSI mode is enabled, set the corresponding domain state. */ + pd_state = state->data; + psci_set_domain_state(*pd_state); + + return 0; +} + +static int psci_pd_init(struct device_node *np, bool use_osi) +{ + struct generic_pm_domain *pd; + struct psci_pd_provider *pd_provider; + struct dev_power_governor *pd_gov; + int ret = -ENOMEM; + + pd = dt_idle_pd_alloc(np, psci_dt_parse_state_node); + if (!pd) + goto out; + + pd_provider = kzalloc(sizeof(*pd_provider), GFP_KERNEL); + if (!pd_provider) + goto free_pd; + + pd->flags |= GENPD_FLAG_IRQ_SAFE | GENPD_FLAG_CPU_DOMAIN; + + /* + * Allow power off when OSI has been successfully enabled. + * PREEMPT_RT is not yet ready to enter domain idle states. + */ + if (use_osi && !IS_ENABLED(CONFIG_PREEMPT_RT)) + pd->power_off = psci_pd_power_off; + else + pd->flags |= GENPD_FLAG_ALWAYS_ON; + + /* Use governor for CPU PM domains if it has some states to manage. */ + pd_gov = pd->states ? &pm_domain_cpu_gov : NULL; + + ret = pm_genpd_init(pd, pd_gov, false); + if (ret) + goto free_pd_prov; + + ret = of_genpd_add_provider_simple(np, pd); + if (ret) + goto remove_pd; + + pd_provider->node = of_node_get(np); + list_add(&pd_provider->link, &psci_pd_providers); + + pr_debug("init PM domain %s\n", pd->name); + return 0; + +remove_pd: + pm_genpd_remove(pd); +free_pd_prov: + kfree(pd_provider); +free_pd: + dt_idle_pd_free(pd); +out: + pr_err("failed to init PM domain ret=%d %pOF\n", ret, np); + return ret; +} + +static void psci_pd_remove(void) +{ + struct psci_pd_provider *pd_provider, *it; + struct generic_pm_domain *genpd; + + list_for_each_entry_safe(pd_provider, it, &psci_pd_providers, link) { + of_genpd_del_provider(pd_provider->node); + + genpd = of_genpd_remove_last(pd_provider->node); + if (!IS_ERR(genpd)) + kfree(genpd); + + of_node_put(pd_provider->node); + list_del(&pd_provider->link); + kfree(pd_provider); + } +} + +static bool psci_pd_try_set_osi_mode(void) +{ + int ret; + + if (!psci_has_osi_support()) + return false; + + ret = psci_set_osi_mode(true); + if (ret) + return false; + + return true; +} + +static void psci_cpuidle_domain_sync_state(struct device *dev) +{ + /* + * All devices have now been attached/probed to the PM domain topology, + * hence it's fine to allow domain states to be picked. + */ + psci_pd_allow_domain_state = true; +} + +static const struct of_device_id psci_of_match[] = { + { .compatible = "arm,psci-1.0" }, + {} +}; + +static int psci_cpuidle_domain_probe(struct platform_device *pdev) +{ + struct device_node *np = pdev->dev.of_node; + struct device_node *node; + bool use_osi; + int ret = 0, pd_count = 0; + + if (!np) + return -ENODEV; + + /* If OSI mode is supported, let's try to enable it. */ + use_osi = psci_pd_try_set_osi_mode(); + + /* + * Parse child nodes for the "#power-domain-cells" property and + * initialize a genpd/genpd-of-provider pair when it's found. + */ + for_each_child_of_node(np, node) { + if (!of_find_property(node, "#power-domain-cells", NULL)) + continue; + + ret = psci_pd_init(node, use_osi); + if (ret) + goto put_node; + + pd_count++; + } + + /* Bail out if not using the hierarchical CPU topology. */ + if (!pd_count) + goto no_pd; + + /* Link genpd masters/subdomains to model the CPU topology. */ + ret = dt_idle_pd_init_topology(np); + if (ret) + goto remove_pd; + + pr_info("Initialized CPU PM domain topology using %s mode\n", + use_osi ? "OSI" : "PC"); + return 0; + +put_node: + of_node_put(node); +remove_pd: + psci_pd_remove(); + pr_err("failed to create CPU PM domains ret=%d\n", ret); +no_pd: + if (use_osi) + psci_set_osi_mode(false); + return ret; +} + +static struct platform_driver psci_cpuidle_domain_driver = { + .probe = psci_cpuidle_domain_probe, + .driver = { + .name = "psci-cpuidle-domain", + .of_match_table = psci_of_match, + .sync_state = psci_cpuidle_domain_sync_state, + }, +}; + +static int __init psci_idle_init_domains(void) +{ + return platform_driver_register(&psci_cpuidle_domain_driver); +} +subsys_initcall(psci_idle_init_domains); -- cgit v1.2.3