From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c | 177 ++++++++++++++++++++++ 1 file changed, 177 insertions(+) create mode 100644 drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c (limited to 'drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c') diff --git a/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c new file mode 100644 index 000000000..70c7b5d57 --- /dev/null +++ b/drivers/crypto/allwinner/sun8i-ss/sun8i-ss-prng.c @@ -0,0 +1,177 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * sun8i-ss-prng.c - hardware cryptographic offloader for + * Allwinner A80/A83T SoC + * + * Copyright (C) 2015-2020 Corentin Labbe + * + * This file handle the PRNG found in the SS + * + * You could find a link for the datasheet in Documentation/arm/sunxi.rst + */ +#include "sun8i-ss.h" +#include +#include +#include +#include +#include + +int sun8i_ss_prng_seed(struct crypto_rng *tfm, const u8 *seed, + unsigned int slen) +{ + struct sun8i_ss_rng_tfm_ctx *ctx = crypto_rng_ctx(tfm); + + if (ctx->seed && ctx->slen != slen) { + kfree_sensitive(ctx->seed); + ctx->slen = 0; + ctx->seed = NULL; + } + if (!ctx->seed) + ctx->seed = kmalloc(slen, GFP_KERNEL); + if (!ctx->seed) + return -ENOMEM; + + memcpy(ctx->seed, seed, slen); + ctx->slen = slen; + + return 0; +} + +int sun8i_ss_prng_init(struct crypto_tfm *tfm) +{ + struct sun8i_ss_rng_tfm_ctx *ctx = crypto_tfm_ctx(tfm); + + memset(ctx, 0, sizeof(struct sun8i_ss_rng_tfm_ctx)); + return 0; +} + +void sun8i_ss_prng_exit(struct crypto_tfm *tfm) +{ + struct sun8i_ss_rng_tfm_ctx *ctx = crypto_tfm_ctx(tfm); + + kfree_sensitive(ctx->seed); + ctx->seed = NULL; + ctx->slen = 0; +} + +int sun8i_ss_prng_generate(struct crypto_rng *tfm, const u8 *src, + unsigned int slen, u8 *dst, unsigned int dlen) +{ + struct sun8i_ss_rng_tfm_ctx *ctx = crypto_rng_ctx(tfm); + struct rng_alg *alg = crypto_rng_alg(tfm); + struct sun8i_ss_alg_template *algt; + unsigned int todo_with_padding; + struct sun8i_ss_dev *ss; + dma_addr_t dma_iv, dma_dst; + unsigned int todo; + int err = 0; + int flow; + void *d; + u32 v; + + algt = container_of(alg, struct sun8i_ss_alg_template, alg.rng); + ss = algt->ss; + + if (ctx->slen == 0) { + dev_err(ss->dev, "The PRNG is not seeded\n"); + return -EINVAL; + } + + /* The SS does not give an updated seed, so we need to get a new one. + * So we will ask for an extra PRNG_SEED_SIZE data. + * We want dlen + seedsize rounded up to a multiple of PRNG_DATA_SIZE + */ + todo = dlen + PRNG_SEED_SIZE + PRNG_DATA_SIZE; + todo -= todo % PRNG_DATA_SIZE; + + todo_with_padding = ALIGN(todo, dma_get_cache_alignment()); + if (todo_with_padding < todo || todo < dlen) + return -EOVERFLOW; + + d = kzalloc(todo_with_padding, GFP_KERNEL); + if (!d) + return -ENOMEM; + + flow = sun8i_ss_get_engine_number(ss); + +#ifdef CONFIG_CRYPTO_DEV_SUN8I_SS_DEBUG + algt->stat_req++; + algt->stat_bytes += todo; +#endif + + v = SS_ALG_PRNG | SS_PRNG_CONTINUE | SS_START; + if (flow) + v |= SS_FLOW1; + else + v |= SS_FLOW0; + + dma_iv = dma_map_single(ss->dev, ctx->seed, ctx->slen, DMA_TO_DEVICE); + if (dma_mapping_error(ss->dev, dma_iv)) { + dev_err(ss->dev, "Cannot DMA MAP IV\n"); + err = -EFAULT; + goto err_free; + } + + dma_dst = dma_map_single(ss->dev, d, todo, DMA_FROM_DEVICE); + if (dma_mapping_error(ss->dev, dma_dst)) { + dev_err(ss->dev, "Cannot DMA MAP DST\n"); + err = -EFAULT; + goto err_iv; + } + + err = pm_runtime_resume_and_get(ss->dev); + if (err < 0) + goto err_pm; + err = 0; + + mutex_lock(&ss->mlock); + writel(dma_iv, ss->base + SS_IV_ADR_REG); + /* the PRNG act badly (failing rngtest) without SS_KEY_ADR_REG set */ + writel(dma_iv, ss->base + SS_KEY_ADR_REG); + writel(dma_dst, ss->base + SS_DST_ADR_REG); + writel(todo / 4, ss->base + SS_LEN_ADR_REG); + + reinit_completion(&ss->flows[flow].complete); + ss->flows[flow].status = 0; + /* Be sure all data is written before enabling the task */ + wmb(); + + writel(v, ss->base + SS_CTL_REG); + + wait_for_completion_interruptible_timeout(&ss->flows[flow].complete, + msecs_to_jiffies(todo)); + if (ss->flows[flow].status == 0) { + dev_err(ss->dev, "DMA timeout for PRNG (size=%u)\n", todo); + err = -EFAULT; + } + /* Since cipher and hash use the linux/cryptoengine and that we have + * a cryptoengine per flow, we are sure that they will issue only one + * request per flow. + * Since the cryptoengine wait for completion before submitting a new + * one, the mlock could be left just after the final writel. + * But cryptoengine cannot handle crypto_rng, so we need to be sure + * nothing will use our flow. + * The easiest way is to grab mlock until the hardware end our requests. + * We could have used a per flow lock, but this would increase + * complexity. + * The drawback is that no request could be handled for the other flow. + */ + mutex_unlock(&ss->mlock); + + pm_runtime_put(ss->dev); + +err_pm: + dma_unmap_single(ss->dev, dma_dst, todo, DMA_FROM_DEVICE); +err_iv: + dma_unmap_single(ss->dev, dma_iv, ctx->slen, DMA_TO_DEVICE); + + if (!err) { + memcpy(dst, d, dlen); + /* Update seed */ + memcpy(ctx->seed, d + dlen, ctx->slen); + } +err_free: + kfree_sensitive(d); + + return err; +} -- cgit v1.2.3