From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/atmel-i2c.c | 395 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 395 insertions(+) create mode 100644 drivers/crypto/atmel-i2c.c (limited to 'drivers/crypto/atmel-i2c.c') diff --git a/drivers/crypto/atmel-i2c.c b/drivers/crypto/atmel-i2c.c new file mode 100644 index 000000000..83a9093ef --- /dev/null +++ b/drivers/crypto/atmel-i2c.c @@ -0,0 +1,395 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip / Atmel ECC (I2C) driver. + * + * Copyright (c) 2017, Microchip Technology Inc. + * Author: Tudor Ambarus + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "atmel-i2c.h" + +static const struct { + u8 value; + const char *error_text; +} error_list[] = { + { 0x01, "CheckMac or Verify miscompare" }, + { 0x03, "Parse Error" }, + { 0x05, "ECC Fault" }, + { 0x0F, "Execution Error" }, + { 0xEE, "Watchdog about to expire" }, + { 0xFF, "CRC or other communication error" }, +}; + +/** + * atmel_i2c_checksum() - Generate 16-bit CRC as required by ATMEL ECC. + * CRC16 verification of the count, opcode, param1, param2 and data bytes. + * The checksum is saved in little-endian format in the least significant + * two bytes of the command. CRC polynomial is 0x8005 and the initial register + * value should be zero. + * + * @cmd : structure used for communicating with the device. + */ +static void atmel_i2c_checksum(struct atmel_i2c_cmd *cmd) +{ + u8 *data = &cmd->count; + size_t len = cmd->count - CRC_SIZE; + __le16 *__crc16 = (__le16 *)(data + len); + + *__crc16 = cpu_to_le16(bitrev16(crc16(0, data, len))); +} + +void atmel_i2c_init_read_cmd(struct atmel_i2c_cmd *cmd) +{ + cmd->word_addr = COMMAND; + cmd->opcode = OPCODE_READ; + /* + * Read the word from Configuration zone that contains the lock bytes + * (UserExtra, Selector, LockValue, LockConfig). + */ + cmd->param1 = CONFIGURATION_ZONE; + cmd->param2 = cpu_to_le16(DEVICE_LOCK_ADDR); + cmd->count = READ_COUNT; + + atmel_i2c_checksum(cmd); + + cmd->msecs = MAX_EXEC_TIME_READ; + cmd->rxsize = READ_RSP_SIZE; +} +EXPORT_SYMBOL(atmel_i2c_init_read_cmd); + +void atmel_i2c_init_random_cmd(struct atmel_i2c_cmd *cmd) +{ + cmd->word_addr = COMMAND; + cmd->opcode = OPCODE_RANDOM; + cmd->param1 = 0; + cmd->param2 = 0; + cmd->count = RANDOM_COUNT; + + atmel_i2c_checksum(cmd); + + cmd->msecs = MAX_EXEC_TIME_RANDOM; + cmd->rxsize = RANDOM_RSP_SIZE; +} +EXPORT_SYMBOL(atmel_i2c_init_random_cmd); + +void atmel_i2c_init_genkey_cmd(struct atmel_i2c_cmd *cmd, u16 keyid) +{ + cmd->word_addr = COMMAND; + cmd->count = GENKEY_COUNT; + cmd->opcode = OPCODE_GENKEY; + cmd->param1 = GENKEY_MODE_PRIVATE; + /* a random private key will be generated and stored in slot keyID */ + cmd->param2 = cpu_to_le16(keyid); + + atmel_i2c_checksum(cmd); + + cmd->msecs = MAX_EXEC_TIME_GENKEY; + cmd->rxsize = GENKEY_RSP_SIZE; +} +EXPORT_SYMBOL(atmel_i2c_init_genkey_cmd); + +int atmel_i2c_init_ecdh_cmd(struct atmel_i2c_cmd *cmd, + struct scatterlist *pubkey) +{ + size_t copied; + + cmd->word_addr = COMMAND; + cmd->count = ECDH_COUNT; + cmd->opcode = OPCODE_ECDH; + cmd->param1 = ECDH_PREFIX_MODE; + /* private key slot */ + cmd->param2 = cpu_to_le16(DATA_SLOT_2); + + /* + * The device only supports NIST P256 ECC keys. The public key size will + * always be the same. Use a macro for the key size to avoid unnecessary + * computations. + */ + copied = sg_copy_to_buffer(pubkey, + sg_nents_for_len(pubkey, + ATMEL_ECC_PUBKEY_SIZE), + cmd->data, ATMEL_ECC_PUBKEY_SIZE); + if (copied != ATMEL_ECC_PUBKEY_SIZE) + return -EINVAL; + + atmel_i2c_checksum(cmd); + + cmd->msecs = MAX_EXEC_TIME_ECDH; + cmd->rxsize = ECDH_RSP_SIZE; + + return 0; +} +EXPORT_SYMBOL(atmel_i2c_init_ecdh_cmd); + +/* + * After wake and after execution of a command, there will be error, status, or + * result bytes in the device's output register that can be retrieved by the + * system. When the length of that group is four bytes, the codes returned are + * detailed in error_list. + */ +static int atmel_i2c_status(struct device *dev, u8 *status) +{ + size_t err_list_len = ARRAY_SIZE(error_list); + int i; + u8 err_id = status[1]; + + if (*status != STATUS_SIZE) + return 0; + + if (err_id == STATUS_WAKE_SUCCESSFUL || err_id == STATUS_NOERR) + return 0; + + for (i = 0; i < err_list_len; i++) + if (error_list[i].value == err_id) + break; + + /* if err_id is not in the error_list then ignore it */ + if (i != err_list_len) { + dev_err(dev, "%02x: %s:\n", err_id, error_list[i].error_text); + return err_id; + } + + return 0; +} + +static int atmel_i2c_wakeup(struct i2c_client *client) +{ + struct atmel_i2c_client_priv *i2c_priv = i2c_get_clientdata(client); + u8 status[STATUS_RSP_SIZE]; + int ret; + + /* + * The device ignores any levels or transitions on the SCL pin when the + * device is idle, asleep or during waking up. Don't check for error + * when waking up the device. + */ + i2c_transfer_buffer_flags(client, i2c_priv->wake_token, + i2c_priv->wake_token_sz, I2C_M_IGNORE_NAK); + + /* + * Wait to wake the device. Typical execution times for ecdh and genkey + * are around tens of milliseconds. Delta is chosen to 50 microseconds. + */ + usleep_range(TWHI_MIN, TWHI_MAX); + + ret = i2c_master_recv(client, status, STATUS_SIZE); + if (ret < 0) + return ret; + + return atmel_i2c_status(&client->dev, status); +} + +static int atmel_i2c_sleep(struct i2c_client *client) +{ + u8 sleep = SLEEP_TOKEN; + + return i2c_master_send(client, &sleep, 1); +} + +/* + * atmel_i2c_send_receive() - send a command to the device and receive its + * response. + * @client: i2c client device + * @cmd : structure used to communicate with the device + * + * After the device receives a Wake token, a watchdog counter starts within the + * device. After the watchdog timer expires, the device enters sleep mode + * regardless of whether some I/O transmission or command execution is in + * progress. If a command is attempted when insufficient time remains prior to + * watchdog timer execution, the device will return the watchdog timeout error + * code without attempting to execute the command. There is no way to reset the + * counter other than to put the device into sleep or idle mode and then + * wake it up again. + */ +int atmel_i2c_send_receive(struct i2c_client *client, struct atmel_i2c_cmd *cmd) +{ + struct atmel_i2c_client_priv *i2c_priv = i2c_get_clientdata(client); + int ret; + + mutex_lock(&i2c_priv->lock); + + ret = atmel_i2c_wakeup(client); + if (ret) + goto err; + + /* send the command */ + ret = i2c_master_send(client, (u8 *)cmd, cmd->count + WORD_ADDR_SIZE); + if (ret < 0) + goto err; + + /* delay the appropriate amount of time for command to execute */ + msleep(cmd->msecs); + + /* receive the response */ + ret = i2c_master_recv(client, cmd->data, cmd->rxsize); + if (ret < 0) + goto err; + + /* put the device into low-power mode */ + ret = atmel_i2c_sleep(client); + if (ret < 0) + goto err; + + mutex_unlock(&i2c_priv->lock); + return atmel_i2c_status(&client->dev, cmd->data); +err: + mutex_unlock(&i2c_priv->lock); + return ret; +} +EXPORT_SYMBOL(atmel_i2c_send_receive); + +static void atmel_i2c_work_handler(struct work_struct *work) +{ + struct atmel_i2c_work_data *work_data = + container_of(work, struct atmel_i2c_work_data, work); + struct atmel_i2c_cmd *cmd = &work_data->cmd; + struct i2c_client *client = work_data->client; + int status; + + status = atmel_i2c_send_receive(client, cmd); + work_data->cbk(work_data, work_data->areq, status); +} + +static struct workqueue_struct *atmel_wq; + +void atmel_i2c_enqueue(struct atmel_i2c_work_data *work_data, + void (*cbk)(struct atmel_i2c_work_data *work_data, + void *areq, int status), + void *areq) +{ + work_data->cbk = (void *)cbk; + work_data->areq = areq; + + INIT_WORK(&work_data->work, atmel_i2c_work_handler); + queue_work(atmel_wq, &work_data->work); +} +EXPORT_SYMBOL(atmel_i2c_enqueue); + +void atmel_i2c_flush_queue(void) +{ + flush_workqueue(atmel_wq); +} +EXPORT_SYMBOL(atmel_i2c_flush_queue); + +static inline size_t atmel_i2c_wake_token_sz(u32 bus_clk_rate) +{ + u32 no_of_bits = DIV_ROUND_UP(TWLO_USEC * bus_clk_rate, USEC_PER_SEC); + + /* return the size of the wake_token in bytes */ + return DIV_ROUND_UP(no_of_bits, 8); +} + +static int device_sanity_check(struct i2c_client *client) +{ + struct atmel_i2c_cmd *cmd; + int ret; + + cmd = kmalloc(sizeof(*cmd), GFP_KERNEL); + if (!cmd) + return -ENOMEM; + + atmel_i2c_init_read_cmd(cmd); + + ret = atmel_i2c_send_receive(client, cmd); + if (ret) + goto free_cmd; + + /* + * It is vital that the Configuration, Data and OTP zones be locked + * prior to release into the field of the system containing the device. + * Failure to lock these zones may permit modification of any secret + * keys and may lead to other security problems. + */ + if (cmd->data[LOCK_CONFIG_IDX] || cmd->data[LOCK_VALUE_IDX]) { + dev_err(&client->dev, "Configuration or Data and OTP zones are unlocked!\n"); + ret = -ENOTSUPP; + } + + /* fall through */ +free_cmd: + kfree(cmd); + return ret; +} + +int atmel_i2c_probe(struct i2c_client *client) +{ + struct atmel_i2c_client_priv *i2c_priv; + struct device *dev = &client->dev; + int ret; + u32 bus_clk_rate; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) { + dev_err(dev, "I2C_FUNC_I2C not supported\n"); + return -ENODEV; + } + + bus_clk_rate = i2c_acpi_find_bus_speed(&client->adapter->dev); + if (!bus_clk_rate) { + ret = device_property_read_u32(&client->adapter->dev, + "clock-frequency", &bus_clk_rate); + if (ret) { + dev_err(dev, "failed to read clock-frequency property\n"); + return ret; + } + } + + if (bus_clk_rate > 1000000L) { + dev_err(dev, "%u exceeds maximum supported clock frequency (1MHz)\n", + bus_clk_rate); + return -EINVAL; + } + + i2c_priv = devm_kmalloc(dev, sizeof(*i2c_priv), GFP_KERNEL); + if (!i2c_priv) + return -ENOMEM; + + i2c_priv->client = client; + mutex_init(&i2c_priv->lock); + + /* + * WAKE_TOKEN_MAX_SIZE was calculated for the maximum bus_clk_rate - + * 1MHz. The previous bus_clk_rate check ensures us that wake_token_sz + * will always be smaller than or equal to WAKE_TOKEN_MAX_SIZE. + */ + i2c_priv->wake_token_sz = atmel_i2c_wake_token_sz(bus_clk_rate); + + memset(i2c_priv->wake_token, 0, sizeof(i2c_priv->wake_token)); + + atomic_set(&i2c_priv->tfm_count, 0); + + i2c_set_clientdata(client, i2c_priv); + + return device_sanity_check(client); +} +EXPORT_SYMBOL(atmel_i2c_probe); + +static int __init atmel_i2c_init(void) +{ + atmel_wq = alloc_workqueue("atmel_wq", 0, 0); + return atmel_wq ? 0 : -ENOMEM; +} + +static void __exit atmel_i2c_exit(void) +{ + destroy_workqueue(atmel_wq); +} + +module_init(atmel_i2c_init); +module_exit(atmel_i2c_exit); + +MODULE_AUTHOR("Tudor Ambarus"); +MODULE_DESCRIPTION("Microchip / Atmel ECC (I2C) driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3