From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/atmel-i2c.h | 186 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 186 insertions(+) create mode 100644 drivers/crypto/atmel-i2c.h (limited to 'drivers/crypto/atmel-i2c.h') diff --git a/drivers/crypto/atmel-i2c.h b/drivers/crypto/atmel-i2c.h new file mode 100644 index 000000000..c0bd429ee --- /dev/null +++ b/drivers/crypto/atmel-i2c.h @@ -0,0 +1,186 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Copyright (c) 2017, Microchip Technology Inc. + * Author: Tudor Ambarus + */ + +#ifndef __ATMEL_I2C_H__ +#define __ATMEL_I2C_H__ + +#include +#include + +#define ATMEL_ECC_PRIORITY 300 + +#define COMMAND 0x03 /* packet function */ +#define SLEEP_TOKEN 0x01 +#define WAKE_TOKEN_MAX_SIZE 8 + +/* Definitions of Data and Command sizes */ +#define WORD_ADDR_SIZE 1 +#define COUNT_SIZE 1 +#define CRC_SIZE 2 +#define CMD_OVERHEAD_SIZE (COUNT_SIZE + CRC_SIZE) + +/* size in bytes of the n prime */ +#define ATMEL_ECC_NIST_P256_N_SIZE 32 +#define ATMEL_ECC_PUBKEY_SIZE (2 * ATMEL_ECC_NIST_P256_N_SIZE) + +#define STATUS_RSP_SIZE 4 +#define ECDH_RSP_SIZE (32 + CMD_OVERHEAD_SIZE) +#define GENKEY_RSP_SIZE (ATMEL_ECC_PUBKEY_SIZE + \ + CMD_OVERHEAD_SIZE) +#define READ_RSP_SIZE (4 + CMD_OVERHEAD_SIZE) +#define RANDOM_RSP_SIZE (32 + CMD_OVERHEAD_SIZE) +#define MAX_RSP_SIZE GENKEY_RSP_SIZE + +/** + * atmel_i2c_cmd - structure used for communicating with the device. + * @word_addr: indicates the function of the packet sent to the device. This + * byte should have a value of COMMAND for normal operation. + * @count : number of bytes to be transferred to (or from) the device. + * @opcode : the command code. + * @param1 : the first parameter; always present. + * @param2 : the second parameter; always present. + * @data : optional remaining input data. Includes a 2-byte CRC. + * @rxsize : size of the data received from i2c client. + * @msecs : command execution time in milliseconds + */ +struct atmel_i2c_cmd { + u8 word_addr; + u8 count; + u8 opcode; + u8 param1; + __le16 param2; + u8 data[MAX_RSP_SIZE]; + u8 msecs; + u16 rxsize; +} __packed; + +/* Status/Error codes */ +#define STATUS_SIZE 0x04 +#define STATUS_NOERR 0x00 +#define STATUS_WAKE_SUCCESSFUL 0x11 + +/* Definitions for eeprom organization */ +#define CONFIGURATION_ZONE 0 + +/* Definitions for Indexes common to all commands */ +#define RSP_DATA_IDX 1 /* buffer index of data in response */ +#define DATA_SLOT_2 2 /* used for ECDH private key */ + +/* Definitions for the device lock state */ +#define DEVICE_LOCK_ADDR 0x15 +#define LOCK_VALUE_IDX (RSP_DATA_IDX + 2) +#define LOCK_CONFIG_IDX (RSP_DATA_IDX + 3) + +/* + * Wake High delay to data communication (microseconds). SDA should be stable + * high for this entire duration. + */ +#define TWHI_MIN 1500 +#define TWHI_MAX 1550 + +/* Wake Low duration */ +#define TWLO_USEC 60 + +/* Command execution time (milliseconds) */ +#define MAX_EXEC_TIME_ECDH 58 +#define MAX_EXEC_TIME_GENKEY 115 +#define MAX_EXEC_TIME_READ 1 +#define MAX_EXEC_TIME_RANDOM 50 + +/* Command opcode */ +#define OPCODE_ECDH 0x43 +#define OPCODE_GENKEY 0x40 +#define OPCODE_READ 0x02 +#define OPCODE_RANDOM 0x1b + +/* Definitions for the READ Command */ +#define READ_COUNT 7 + +/* Definitions for the RANDOM Command */ +#define RANDOM_COUNT 7 + +/* Definitions for the GenKey Command */ +#define GENKEY_COUNT 7 +#define GENKEY_MODE_PRIVATE 0x04 + +/* Definitions for the ECDH Command */ +#define ECDH_COUNT 71 +#define ECDH_PREFIX_MODE 0x00 + +/* Used for binding tfm objects to i2c clients. */ +struct atmel_ecc_driver_data { + struct list_head i2c_client_list; + spinlock_t i2c_list_lock; +} ____cacheline_aligned; + +/** + * atmel_i2c_client_priv - i2c_client private data + * @client : pointer to i2c client device + * @i2c_client_list_node: part of i2c_client_list + * @lock : lock for sending i2c commands + * @wake_token : wake token array of zeros + * @wake_token_sz : size in bytes of the wake_token + * @tfm_count : number of active crypto transformations on i2c client + * + * Reads and writes from/to the i2c client are sequential. The first byte + * transmitted to the device is treated as the byte size. Any attempt to send + * more than this number of bytes will cause the device to not ACK those bytes. + * After the host writes a single command byte to the input buffer, reads are + * prohibited until after the device completes command execution. Use a mutex + * when sending i2c commands. + */ +struct atmel_i2c_client_priv { + struct i2c_client *client; + struct list_head i2c_client_list_node; + struct mutex lock; + u8 wake_token[WAKE_TOKEN_MAX_SIZE]; + size_t wake_token_sz; + atomic_t tfm_count ____cacheline_aligned; + struct hwrng hwrng; +}; + +/** + * atmel_i2c_work_data - data structure representing the work + * @ctx : transformation context. + * @cbk : pointer to a callback function to be invoked upon completion of this + * request. This has the form: + * callback(struct atmel_i2c_work_data *work_data, void *areq, u8 status) + * where: + * @work_data: data structure representing the work + * @areq : optional pointer to an argument passed with the original + * request. + * @status : status returned from the i2c client device or i2c error. + * @areq: optional pointer to a user argument for use at callback time. + * @work: describes the task to be executed. + * @cmd : structure used for communicating with the device. + */ +struct atmel_i2c_work_data { + void *ctx; + struct i2c_client *client; + void (*cbk)(struct atmel_i2c_work_data *work_data, void *areq, + int status); + void *areq; + struct work_struct work; + struct atmel_i2c_cmd cmd; +}; + +int atmel_i2c_probe(struct i2c_client *client); + +void atmel_i2c_enqueue(struct atmel_i2c_work_data *work_data, + void (*cbk)(struct atmel_i2c_work_data *work_data, + void *areq, int status), + void *areq); +void atmel_i2c_flush_queue(void); + +int atmel_i2c_send_receive(struct i2c_client *client, struct atmel_i2c_cmd *cmd); + +void atmel_i2c_init_read_cmd(struct atmel_i2c_cmd *cmd); +void atmel_i2c_init_random_cmd(struct atmel_i2c_cmd *cmd); +void atmel_i2c_init_genkey_cmd(struct atmel_i2c_cmd *cmd, u16 keyid); +int atmel_i2c_init_ecdh_cmd(struct atmel_i2c_cmd *cmd, + struct scatterlist *pubkey); + +#endif /* __ATMEL_I2C_H__ */ -- cgit v1.2.3