From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/caam/blob_gen.c | 191 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 191 insertions(+) create mode 100644 drivers/crypto/caam/blob_gen.c (limited to 'drivers/crypto/caam/blob_gen.c') diff --git a/drivers/crypto/caam/blob_gen.c b/drivers/crypto/caam/blob_gen.c new file mode 100644 index 000000000..87781c153 --- /dev/null +++ b/drivers/crypto/caam/blob_gen.c @@ -0,0 +1,191 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2015 Pengutronix, Steffen Trumtrar + * Copyright (C) 2021 Pengutronix, Ahmad Fatoum + */ + +#define pr_fmt(fmt) "caam blob_gen: " fmt + +#include +#include +#include + +#include "compat.h" +#include "desc_constr.h" +#include "desc.h" +#include "error.h" +#include "intern.h" +#include "jr.h" +#include "regs.h" + +#define CAAM_BLOB_DESC_BYTES_MAX \ + /* Command to initialize & stating length of descriptor */ \ + (CAAM_CMD_SZ + \ + /* Command to append the key-modifier + key-modifier data */ \ + CAAM_CMD_SZ + CAAM_BLOB_KEYMOD_LENGTH + \ + /* Command to include input key + pointer to the input key */ \ + CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \ + /* Command to include output key + pointer to the output key */ \ + CAAM_CMD_SZ + CAAM_PTR_SZ_MAX + \ + /* Command describing the operation to perform */ \ + CAAM_CMD_SZ) + +struct caam_blob_priv { + struct device jrdev; +}; + +struct caam_blob_job_result { + int err; + struct completion completion; +}; + +static void caam_blob_job_done(struct device *dev, u32 *desc, u32 err, void *context) +{ + struct caam_blob_job_result *res = context; + int ecode = 0; + + dev_dbg(dev, "%s %d: err 0x%x\n", __func__, __LINE__, err); + + if (err) + ecode = caam_jr_strstatus(dev, err); + + res->err = ecode; + + /* + * Upon completion, desc points to a buffer containing a CAAM job + * descriptor which encapsulates data into an externally-storable + * blob. + */ + complete(&res->completion); +} + +int caam_process_blob(struct caam_blob_priv *priv, + struct caam_blob_info *info, bool encap) +{ + const struct caam_drv_private *ctrlpriv; + struct caam_blob_job_result testres; + struct device *jrdev = &priv->jrdev; + dma_addr_t dma_in, dma_out; + int op = OP_PCLID_BLOB; + size_t output_len; + u32 *desc; + u32 moo; + int ret; + + if (info->key_mod_len > CAAM_BLOB_KEYMOD_LENGTH) + return -EINVAL; + + if (encap) { + op |= OP_TYPE_ENCAP_PROTOCOL; + output_len = info->input_len + CAAM_BLOB_OVERHEAD; + } else { + op |= OP_TYPE_DECAP_PROTOCOL; + output_len = info->input_len - CAAM_BLOB_OVERHEAD; + } + + desc = kzalloc(CAAM_BLOB_DESC_BYTES_MAX, GFP_KERNEL); + if (!desc) + return -ENOMEM; + + dma_in = dma_map_single(jrdev, info->input, info->input_len, + DMA_TO_DEVICE); + if (dma_mapping_error(jrdev, dma_in)) { + dev_err(jrdev, "unable to map input DMA buffer\n"); + ret = -ENOMEM; + goto out_free; + } + + dma_out = dma_map_single(jrdev, info->output, output_len, + DMA_FROM_DEVICE); + if (dma_mapping_error(jrdev, dma_out)) { + dev_err(jrdev, "unable to map output DMA buffer\n"); + ret = -ENOMEM; + goto out_unmap_in; + } + + ctrlpriv = dev_get_drvdata(jrdev->parent); + moo = FIELD_GET(CSTA_MOO, rd_reg32(&ctrlpriv->ctrl->perfmon.status)); + if (moo != CSTA_MOO_SECURE && moo != CSTA_MOO_TRUSTED) + dev_warn(jrdev, + "using insecure test key, enable HAB to use unique device key!\n"); + + /* + * A data blob is encrypted using a blob key (BK); a random number. + * The BK is used as an AES-CCM key. The initial block (B0) and the + * initial counter (Ctr0) are generated automatically and stored in + * Class 1 Context DWords 0+1+2+3. The random BK is stored in the + * Class 1 Key Register. Operation Mode is set to AES-CCM. + */ + + init_job_desc(desc, 0); + append_key_as_imm(desc, info->key_mod, info->key_mod_len, + info->key_mod_len, CLASS_2 | KEY_DEST_CLASS_REG); + append_seq_in_ptr_intlen(desc, dma_in, info->input_len, 0); + append_seq_out_ptr_intlen(desc, dma_out, output_len, 0); + append_operation(desc, op); + + print_hex_dump_debug("data@"__stringify(__LINE__)": ", + DUMP_PREFIX_ADDRESS, 16, 1, info->input, + info->input_len, false); + print_hex_dump_debug("jobdesc@"__stringify(__LINE__)": ", + DUMP_PREFIX_ADDRESS, 16, 1, desc, + desc_bytes(desc), false); + + testres.err = 0; + init_completion(&testres.completion); + + ret = caam_jr_enqueue(jrdev, desc, caam_blob_job_done, &testres); + if (ret == -EINPROGRESS) { + wait_for_completion(&testres.completion); + ret = testres.err; + print_hex_dump_debug("output@"__stringify(__LINE__)": ", + DUMP_PREFIX_ADDRESS, 16, 1, info->output, + output_len, false); + } + + if (ret == 0) + info->output_len = output_len; + + dma_unmap_single(jrdev, dma_out, output_len, DMA_FROM_DEVICE); +out_unmap_in: + dma_unmap_single(jrdev, dma_in, info->input_len, DMA_TO_DEVICE); +out_free: + kfree(desc); + + return ret; +} +EXPORT_SYMBOL(caam_process_blob); + +struct caam_blob_priv *caam_blob_gen_init(void) +{ + struct caam_drv_private *ctrlpriv; + struct device *jrdev; + + /* + * caam_blob_gen_init() may expectedly fail with -ENODEV, e.g. when + * CAAM driver didn't probe or when SoC lacks BLOB support. An + * error would be harsh in this case, so we stick to info level. + */ + + jrdev = caam_jr_alloc(); + if (IS_ERR(jrdev)) { + pr_info("job ring requested, but none currently available\n"); + return ERR_PTR(-ENODEV); + } + + ctrlpriv = dev_get_drvdata(jrdev->parent); + if (!ctrlpriv->blob_present) { + dev_info(jrdev, "no hardware blob generation support\n"); + caam_jr_free(jrdev); + return ERR_PTR(-ENODEV); + } + + return container_of(jrdev, struct caam_blob_priv, jrdev); +} +EXPORT_SYMBOL(caam_blob_gen_init); + +void caam_blob_gen_exit(struct caam_blob_priv *priv) +{ + caam_jr_free(&priv->jrdev); +} +EXPORT_SYMBOL(caam_blob_gen_exit); -- cgit v1.2.3