From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/caam/desc_constr.h | 606 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 606 insertions(+) create mode 100644 drivers/crypto/caam/desc_constr.h (limited to 'drivers/crypto/caam/desc_constr.h') diff --git a/drivers/crypto/caam/desc_constr.h b/drivers/crypto/caam/desc_constr.h new file mode 100644 index 000000000..824c94d44 --- /dev/null +++ b/drivers/crypto/caam/desc_constr.h @@ -0,0 +1,606 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * caam descriptor construction helper functions + * + * Copyright 2008-2012 Freescale Semiconductor, Inc. + * Copyright 2019 NXP + */ + +#ifndef DESC_CONSTR_H +#define DESC_CONSTR_H + +#include "desc.h" +#include "regs.h" + +#define IMMEDIATE (1 << 23) +#define CAAM_CMD_SZ sizeof(u32) +#define CAAM_PTR_SZ caam_ptr_sz +#define CAAM_PTR_SZ_MAX sizeof(dma_addr_t) +#define CAAM_PTR_SZ_MIN sizeof(u32) +#define CAAM_DESC_BYTES_MAX (CAAM_CMD_SZ * MAX_CAAM_DESCSIZE) +#define __DESC_JOB_IO_LEN(n) (CAAM_CMD_SZ * 5 + (n) * 3) +#define DESC_JOB_IO_LEN __DESC_JOB_IO_LEN(CAAM_PTR_SZ) +#define DESC_JOB_IO_LEN_MAX __DESC_JOB_IO_LEN(CAAM_PTR_SZ_MAX) +#define DESC_JOB_IO_LEN_MIN __DESC_JOB_IO_LEN(CAAM_PTR_SZ_MIN) + +/* + * The CAAM QI hardware constructs a job descriptor which points + * to shared descriptor (as pointed by context_a of FQ to CAAM). + * When the job descriptor is executed by deco, the whole job + * descriptor together with shared descriptor gets loaded in + * deco buffer which is 64 words long (each 32-bit). + * + * The job descriptor constructed by QI hardware has layout: + * + * HEADER (1 word) + * Shdesc ptr (1 or 2 words) + * SEQ_OUT_PTR (1 word) + * Out ptr (1 or 2 words) + * Out length (1 word) + * SEQ_IN_PTR (1 word) + * In ptr (1 or 2 words) + * In length (1 word) + * + * The shdesc ptr is used to fetch shared descriptor contents + * into deco buffer. + * + * Apart from shdesc contents, the total number of words that + * get loaded in deco buffer are '8' or '11'. The remaining words + * in deco buffer can be used for storing shared descriptor. + */ +#define MAX_SDLEN ((CAAM_DESC_BYTES_MAX - DESC_JOB_IO_LEN_MIN) / CAAM_CMD_SZ) + +#ifdef DEBUG +#define PRINT_POS do { printk(KERN_DEBUG "%02d: %s\n", desc_len(desc),\ + &__func__[sizeof("append")]); } while (0) +#else +#define PRINT_POS +#endif + +#define SET_OK_NO_PROP_ERRORS (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_CHG_SHARE_OK_NO_PROP << \ + LDST_OFFSET_SHIFT)) +#define DISABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_DISABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT)) +#define ENABLE_AUTO_INFO_FIFO (IMMEDIATE | LDST_CLASS_DECO | \ + LDST_SRCDST_WORD_DECOCTRL | \ + (LDOFF_ENABLE_AUTO_NFIFO << LDST_OFFSET_SHIFT)) + +extern bool caam_little_end; +extern size_t caam_ptr_sz; + +/* + * HW fetches 4 S/G table entries at a time, irrespective of how many entries + * are in the table. It's SW's responsibility to make sure these accesses + * do not have side effects. + */ +static inline int pad_sg_nents(int sg_nents) +{ + return ALIGN(sg_nents, 4); +} + +static inline int desc_len(u32 * const desc) +{ + return caam32_to_cpu(*desc) & HDR_DESCLEN_MASK; +} + +static inline int desc_bytes(void * const desc) +{ + return desc_len(desc) * CAAM_CMD_SZ; +} + +static inline u32 *desc_end(u32 * const desc) +{ + return desc + desc_len(desc); +} + +static inline void *sh_desc_pdb(u32 * const desc) +{ + return desc + 1; +} + +static inline void init_desc(u32 * const desc, u32 options) +{ + *desc = cpu_to_caam32((options | HDR_ONE) + 1); +} + +static inline void init_sh_desc(u32 * const desc, u32 options) +{ + PRINT_POS; + init_desc(desc, CMD_SHARED_DESC_HDR | options); +} + +static inline void init_sh_desc_pdb(u32 * const desc, u32 options, + size_t pdb_bytes) +{ + u32 pdb_len = (pdb_bytes + CAAM_CMD_SZ - 1) / CAAM_CMD_SZ; + + init_sh_desc(desc, (((pdb_len + 1) << HDR_START_IDX_SHIFT) + pdb_len) | + options); +} + +static inline void init_job_desc(u32 * const desc, u32 options) +{ + init_desc(desc, CMD_DESC_HDR | options); +} + +static inline void init_job_desc_pdb(u32 * const desc, u32 options, + size_t pdb_bytes) +{ + u32 pdb_len = (pdb_bytes + CAAM_CMD_SZ - 1) / CAAM_CMD_SZ; + + init_job_desc(desc, (((pdb_len + 1) << HDR_START_IDX_SHIFT)) | options); +} + +static inline void append_ptr(u32 * const desc, dma_addr_t ptr) +{ + if (caam_ptr_sz == sizeof(dma_addr_t)) { + dma_addr_t *offset = (dma_addr_t *)desc_end(desc); + + *offset = cpu_to_caam_dma(ptr); + } else { + u32 *offset = (u32 *)desc_end(desc); + + *offset = cpu_to_caam_dma(ptr); + } + + (*desc) = cpu_to_caam32(caam32_to_cpu(*desc) + + CAAM_PTR_SZ / CAAM_CMD_SZ); +} + +static inline void init_job_desc_shared(u32 * const desc, dma_addr_t ptr, + int len, u32 options) +{ + PRINT_POS; + init_job_desc(desc, HDR_SHARED | options | + (len << HDR_START_IDX_SHIFT)); + append_ptr(desc, ptr); +} + +static inline void append_data(u32 * const desc, const void *data, int len) +{ + u32 *offset = desc_end(desc); + + /* Avoid gcc warning: memcpy with data == NULL */ + if (!IS_ENABLED(CONFIG_CRYPTO_DEV_FSL_CAAM_DEBUG) || data) + memcpy(offset, data, len); + + (*desc) = cpu_to_caam32(caam32_to_cpu(*desc) + + (len + CAAM_CMD_SZ - 1) / CAAM_CMD_SZ); +} + +static inline void append_cmd(u32 * const desc, u32 command) +{ + u32 *cmd = desc_end(desc); + + *cmd = cpu_to_caam32(command); + + (*desc) = cpu_to_caam32(caam32_to_cpu(*desc) + 1); +} + +#define append_u32 append_cmd + +static inline void append_u64(u32 * const desc, u64 data) +{ + u32 *offset = desc_end(desc); + + /* Only 32-bit alignment is guaranteed in descriptor buffer */ + if (caam_little_end) { + *offset = cpu_to_caam32(lower_32_bits(data)); + *(++offset) = cpu_to_caam32(upper_32_bits(data)); + } else { + *offset = cpu_to_caam32(upper_32_bits(data)); + *(++offset) = cpu_to_caam32(lower_32_bits(data)); + } + + (*desc) = cpu_to_caam32(caam32_to_cpu(*desc) + 2); +} + +/* Write command without affecting header, and return pointer to next word */ +static inline u32 *write_cmd(u32 * const desc, u32 command) +{ + *desc = cpu_to_caam32(command); + + return desc + 1; +} + +static inline void append_cmd_ptr(u32 * const desc, dma_addr_t ptr, int len, + u32 command) +{ + append_cmd(desc, command | len); + append_ptr(desc, ptr); +} + +/* Write length after pointer, rather than inside command */ +static inline void append_cmd_ptr_extlen(u32 * const desc, dma_addr_t ptr, + unsigned int len, u32 command) +{ + append_cmd(desc, command); + if (!(command & (SQIN_RTO | SQIN_PRE))) + append_ptr(desc, ptr); + append_cmd(desc, len); +} + +static inline void append_cmd_data(u32 * const desc, const void *data, int len, + u32 command) +{ + append_cmd(desc, command | IMMEDIATE | len); + append_data(desc, data, len); +} + +#define APPEND_CMD_RET(cmd, op) \ +static inline u32 *append_##cmd(u32 * const desc, u32 options) \ +{ \ + u32 *cmd = desc_end(desc); \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | options); \ + return cmd; \ +} +APPEND_CMD_RET(jump, JUMP) +APPEND_CMD_RET(move, MOVE) +APPEND_CMD_RET(move_len, MOVE_LEN) + +static inline void set_jump_tgt_here(u32 * const desc, u32 *jump_cmd) +{ + *jump_cmd = cpu_to_caam32(caam32_to_cpu(*jump_cmd) | + (desc_len(desc) - (jump_cmd - desc))); +} + +static inline void set_move_tgt_here(u32 * const desc, u32 *move_cmd) +{ + u32 val = caam32_to_cpu(*move_cmd); + + val &= ~MOVE_OFFSET_MASK; + val |= (desc_len(desc) << (MOVE_OFFSET_SHIFT + 2)) & MOVE_OFFSET_MASK; + *move_cmd = cpu_to_caam32(val); +} + +#define APPEND_CMD(cmd, op) \ +static inline void append_##cmd(u32 * const desc, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | options); \ +} +APPEND_CMD(operation, OPERATION) + +#define APPEND_CMD_LEN(cmd, op) \ +static inline void append_##cmd(u32 * const desc, unsigned int len, \ + u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | len | options); \ +} + +APPEND_CMD_LEN(seq_load, SEQ_LOAD) +APPEND_CMD_LEN(seq_store, SEQ_STORE) +APPEND_CMD_LEN(seq_fifo_load, SEQ_FIFO_LOAD) +APPEND_CMD_LEN(seq_fifo_store, SEQ_FIFO_STORE) + +#define APPEND_CMD_PTR(cmd, op) \ +static inline void append_##cmd(u32 * const desc, dma_addr_t ptr, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_ptr(desc, ptr, len, CMD_##op | options); \ +} +APPEND_CMD_PTR(key, KEY) +APPEND_CMD_PTR(load, LOAD) +APPEND_CMD_PTR(fifo_load, FIFO_LOAD) +APPEND_CMD_PTR(fifo_store, FIFO_STORE) + +static inline void append_store(u32 * const desc, dma_addr_t ptr, + unsigned int len, u32 options) +{ + u32 cmd_src; + + cmd_src = options & LDST_SRCDST_MASK; + + append_cmd(desc, CMD_STORE | options | len); + + /* The following options do not require pointer */ + if (!(cmd_src == LDST_SRCDST_WORD_DESCBUF_SHARED || + cmd_src == LDST_SRCDST_WORD_DESCBUF_JOB || + cmd_src == LDST_SRCDST_WORD_DESCBUF_JOB_WE || + cmd_src == LDST_SRCDST_WORD_DESCBUF_SHARED_WE)) + append_ptr(desc, ptr); +} + +#define APPEND_SEQ_PTR_INTLEN(cmd, op) \ +static inline void append_seq_##cmd##_ptr_intlen(u32 * const desc, \ + dma_addr_t ptr, \ + unsigned int len, \ + u32 options) \ +{ \ + PRINT_POS; \ + if (options & (SQIN_RTO | SQIN_PRE)) \ + append_cmd(desc, CMD_SEQ_##op##_PTR | len | options); \ + else \ + append_cmd_ptr(desc, ptr, len, CMD_SEQ_##op##_PTR | options); \ +} +APPEND_SEQ_PTR_INTLEN(in, IN) +APPEND_SEQ_PTR_INTLEN(out, OUT) + +#define APPEND_CMD_PTR_TO_IMM(cmd, op) \ +static inline void append_##cmd##_as_imm(u32 * const desc, const void *data, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_data(desc, data, len, CMD_##op | options); \ +} +APPEND_CMD_PTR_TO_IMM(load, LOAD); +APPEND_CMD_PTR_TO_IMM(fifo_load, FIFO_LOAD); + +#define APPEND_CMD_PTR_EXTLEN(cmd, op) \ +static inline void append_##cmd##_extlen(u32 * const desc, dma_addr_t ptr, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd_ptr_extlen(desc, ptr, len, CMD_##op | SQIN_EXT | options); \ +} +APPEND_CMD_PTR_EXTLEN(seq_in_ptr, SEQ_IN_PTR) +APPEND_CMD_PTR_EXTLEN(seq_out_ptr, SEQ_OUT_PTR) + +/* + * Determine whether to store length internally or externally depending on + * the size of its type + */ +#define APPEND_CMD_PTR_LEN(cmd, op, type) \ +static inline void append_##cmd(u32 * const desc, dma_addr_t ptr, \ + type len, u32 options) \ +{ \ + PRINT_POS; \ + if (sizeof(type) > sizeof(u16)) \ + append_##cmd##_extlen(desc, ptr, len, options); \ + else \ + append_##cmd##_intlen(desc, ptr, len, options); \ +} +APPEND_CMD_PTR_LEN(seq_in_ptr, SEQ_IN_PTR, u32) +APPEND_CMD_PTR_LEN(seq_out_ptr, SEQ_OUT_PTR, u32) + +/* + * 2nd variant for commands whose specified immediate length differs + * from length of immediate data provided, e.g., split keys + */ +#define APPEND_CMD_PTR_TO_IMM2(cmd, op) \ +static inline void append_##cmd##_as_imm(u32 * const desc, const void *data, \ + unsigned int data_len, \ + unsigned int len, u32 options) \ +{ \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | IMMEDIATE | len | options); \ + append_data(desc, data, data_len); \ +} +APPEND_CMD_PTR_TO_IMM2(key, KEY); + +#define APPEND_CMD_RAW_IMM(cmd, op, type) \ +static inline void append_##cmd##_imm_##type(u32 * const desc, type immediate, \ + u32 options) \ +{ \ + PRINT_POS; \ + if (options & LDST_LEN_MASK) \ + append_cmd(desc, CMD_##op | IMMEDIATE | options); \ + else \ + append_cmd(desc, CMD_##op | IMMEDIATE | options | \ + sizeof(type)); \ + append_cmd(desc, immediate); \ +} +APPEND_CMD_RAW_IMM(load, LOAD, u32); + +/* + * ee - endianness + * size - size of immediate type in bytes + */ +#define APPEND_CMD_RAW_IMM2(cmd, op, ee, size) \ +static inline void append_##cmd##_imm_##ee##size(u32 *desc, \ + u##size immediate, \ + u32 options) \ +{ \ + __##ee##size data = cpu_to_##ee##size(immediate); \ + PRINT_POS; \ + append_cmd(desc, CMD_##op | IMMEDIATE | options | sizeof(data)); \ + append_data(desc, &data, sizeof(data)); \ +} + +APPEND_CMD_RAW_IMM2(load, LOAD, be, 32); + +/* + * Append math command. Only the last part of destination and source need to + * be specified + */ +#define APPEND_MATH(op, desc, dest, src_0, src_1, len) \ +append_cmd(desc, CMD_MATH | MATH_FUN_##op | MATH_DEST_##dest | \ + MATH_SRC0_##src_0 | MATH_SRC1_##src_1 | (u32)len); + +#define append_math_add(desc, dest, src0, src1, len) \ + APPEND_MATH(ADD, desc, dest, src0, src1, len) +#define append_math_sub(desc, dest, src0, src1, len) \ + APPEND_MATH(SUB, desc, dest, src0, src1, len) +#define append_math_add_c(desc, dest, src0, src1, len) \ + APPEND_MATH(ADDC, desc, dest, src0, src1, len) +#define append_math_sub_b(desc, dest, src0, src1, len) \ + APPEND_MATH(SUBB, desc, dest, src0, src1, len) +#define append_math_and(desc, dest, src0, src1, len) \ + APPEND_MATH(AND, desc, dest, src0, src1, len) +#define append_math_or(desc, dest, src0, src1, len) \ + APPEND_MATH(OR, desc, dest, src0, src1, len) +#define append_math_xor(desc, dest, src0, src1, len) \ + APPEND_MATH(XOR, desc, dest, src0, src1, len) +#define append_math_lshift(desc, dest, src0, src1, len) \ + APPEND_MATH(LSHIFT, desc, dest, src0, src1, len) +#define append_math_rshift(desc, dest, src0, src1, len) \ + APPEND_MATH(RSHIFT, desc, dest, src0, src1, len) +#define append_math_ldshift(desc, dest, src0, src1, len) \ + APPEND_MATH(SHLD, desc, dest, src0, src1, len) + +/* Exactly one source is IMM. Data is passed in as u32 value */ +#define APPEND_MATH_IMM_u32(op, desc, dest, src_0, src_1, data) \ +do { \ + APPEND_MATH(op, desc, dest, src_0, src_1, CAAM_CMD_SZ); \ + append_cmd(desc, data); \ +} while (0) + +#define append_math_add_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(ADD, desc, dest, src0, src1, data) +#define append_math_sub_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(SUB, desc, dest, src0, src1, data) +#define append_math_add_c_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(ADDC, desc, dest, src0, src1, data) +#define append_math_sub_b_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(SUBB, desc, dest, src0, src1, data) +#define append_math_and_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(AND, desc, dest, src0, src1, data) +#define append_math_or_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(OR, desc, dest, src0, src1, data) +#define append_math_xor_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(XOR, desc, dest, src0, src1, data) +#define append_math_lshift_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(LSHIFT, desc, dest, src0, src1, data) +#define append_math_rshift_imm_u32(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u32(RSHIFT, desc, dest, src0, src1, data) + +/* Exactly one source is IMM. Data is passed in as u64 value */ +#define APPEND_MATH_IMM_u64(op, desc, dest, src_0, src_1, data) \ +do { \ + u32 upper = (data >> 16) >> 16; \ + APPEND_MATH(op, desc, dest, src_0, src_1, CAAM_CMD_SZ * 2 | \ + (upper ? 0 : MATH_IFB)); \ + if (upper) \ + append_u64(desc, data); \ + else \ + append_u32(desc, lower_32_bits(data)); \ +} while (0) + +#define append_math_add_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(ADD, desc, dest, src0, src1, data) +#define append_math_sub_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(SUB, desc, dest, src0, src1, data) +#define append_math_add_c_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(ADDC, desc, dest, src0, src1, data) +#define append_math_sub_b_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(SUBB, desc, dest, src0, src1, data) +#define append_math_and_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(AND, desc, dest, src0, src1, data) +#define append_math_or_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(OR, desc, dest, src0, src1, data) +#define append_math_xor_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(XOR, desc, dest, src0, src1, data) +#define append_math_lshift_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(LSHIFT, desc, dest, src0, src1, data) +#define append_math_rshift_imm_u64(desc, dest, src0, src1, data) \ + APPEND_MATH_IMM_u64(RSHIFT, desc, dest, src0, src1, data) + +/** + * struct alginfo - Container for algorithm details + * @algtype: algorithm selector; for valid values, see documentation of the + * functions where it is used. + * @keylen: length of the provided algorithm key, in bytes + * @keylen_pad: padded length of the provided algorithm key, in bytes + * @key_dma: dma (bus) address where algorithm key resides + * @key_virt: virtual address where algorithm key resides + * @key_inline: true - key can be inlined in the descriptor; false - key is + * referenced by the descriptor + */ +struct alginfo { + u32 algtype; + unsigned int keylen; + unsigned int keylen_pad; + dma_addr_t key_dma; + const void *key_virt; + bool key_inline; +}; + +/** + * desc_inline_query() - Provide indications on which data items can be inlined + * and which shall be referenced in a shared descriptor. + * @sd_base_len: Shared descriptor base length - bytes consumed by the commands, + * excluding the data items to be inlined (or corresponding + * pointer if an item is not inlined). Each cnstr_* function that + * generates descriptors should have a define mentioning + * corresponding length. + * @jd_len: Maximum length of the job descriptor(s) that will be used + * together with the shared descriptor. + * @data_len: Array of lengths of the data items trying to be inlined + * @inl_mask: 32bit mask with bit x = 1 if data item x can be inlined, 0 + * otherwise. + * @count: Number of data items (size of @data_len array); must be <= 32 + * + * Return: 0 if data can be inlined / referenced, negative value if not. If 0, + * check @inl_mask for details. + */ +static inline int desc_inline_query(unsigned int sd_base_len, + unsigned int jd_len, unsigned int *data_len, + u32 *inl_mask, unsigned int count) +{ + int rem_bytes = (int)(CAAM_DESC_BYTES_MAX - sd_base_len - jd_len); + unsigned int i; + + *inl_mask = 0; + for (i = 0; (i < count) && (rem_bytes > 0); i++) { + if (rem_bytes - (int)(data_len[i] + + (count - i - 1) * CAAM_PTR_SZ) >= 0) { + rem_bytes -= data_len[i]; + *inl_mask |= (1 << i); + } else { + rem_bytes -= CAAM_PTR_SZ; + } + } + + return (rem_bytes >= 0) ? 0 : -1; +} + +/** + * append_proto_dkp - Derived Key Protocol (DKP): key -> split key + * @desc: pointer to buffer used for descriptor construction + * @adata: pointer to authentication transform definitions. + * keylen should be the length of initial key, while keylen_pad + * the length of the derived (split) key. + * Valid algorithm values - one of OP_ALG_ALGSEL_{MD5, SHA1, SHA224, + * SHA256, SHA384, SHA512}. + */ +static inline void append_proto_dkp(u32 * const desc, struct alginfo *adata) +{ + u32 protid; + + /* + * Quick & dirty translation from OP_ALG_ALGSEL_{MD5, SHA*} + * to OP_PCLID_DKP_{MD5, SHA*} + */ + protid = (adata->algtype & OP_ALG_ALGSEL_SUBMASK) | + (0x20 << OP_ALG_ALGSEL_SHIFT); + + if (adata->key_inline) { + int words; + + if (adata->keylen > adata->keylen_pad) { + append_operation(desc, OP_TYPE_UNI_PROTOCOL | protid | + OP_PCL_DKP_SRC_PTR | + OP_PCL_DKP_DST_IMM | adata->keylen); + append_ptr(desc, adata->key_dma); + + words = (ALIGN(adata->keylen_pad, CAAM_CMD_SZ) - + CAAM_PTR_SZ) / CAAM_CMD_SZ; + } else { + append_operation(desc, OP_TYPE_UNI_PROTOCOL | protid | + OP_PCL_DKP_SRC_IMM | + OP_PCL_DKP_DST_IMM | adata->keylen); + append_data(desc, adata->key_virt, adata->keylen); + + words = (ALIGN(adata->keylen_pad, CAAM_CMD_SZ) - + ALIGN(adata->keylen, CAAM_CMD_SZ)) / + CAAM_CMD_SZ; + } + + /* Reserve space in descriptor buffer for the derived key */ + if (words) + (*desc) = cpu_to_caam32(caam32_to_cpu(*desc) + words); + } else { + append_operation(desc, OP_TYPE_UNI_PROTOCOL | protid | + OP_PCL_DKP_SRC_PTR | OP_PCL_DKP_DST_PTR | + adata->keylen); + append_ptr(desc, adata->key_dma); + } +} + +#endif /* DESC_CONSTR_H */ -- cgit v1.2.3