From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/caam/error.c | 393 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 393 insertions(+) create mode 100644 drivers/crypto/caam/error.c (limited to 'drivers/crypto/caam/error.c') diff --git a/drivers/crypto/caam/error.c b/drivers/crypto/caam/error.c new file mode 100644 index 000000000..72db90176 --- /dev/null +++ b/drivers/crypto/caam/error.c @@ -0,0 +1,393 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * CAAM Error Reporting + * + * Copyright 2009-2011 Freescale Semiconductor, Inc. + */ + +#include "compat.h" +#include "regs.h" +#include "desc.h" +#include "error.h" + +#ifdef DEBUG +#include + +void caam_dump_sg(const char *prefix_str, int prefix_type, + int rowsize, int groupsize, struct scatterlist *sg, + size_t tlen, bool ascii) +{ + struct scatterlist *it; + void *it_page; + size_t len; + void *buf; + + for (it = sg; it && tlen > 0 ; it = sg_next(it)) { + /* + * make sure the scatterlist's page + * has a valid virtual memory mapping + */ + it_page = kmap_atomic(sg_page(it)); + if (unlikely(!it_page)) { + pr_err("caam_dump_sg: kmap failed\n"); + return; + } + + buf = it_page + it->offset; + len = min_t(size_t, tlen, it->length); + print_hex_dump_debug(prefix_str, prefix_type, rowsize, + groupsize, buf, len, ascii); + tlen -= len; + + kunmap_atomic(it_page); + } +} +#else +void caam_dump_sg(const char *prefix_str, int prefix_type, + int rowsize, int groupsize, struct scatterlist *sg, + size_t tlen, bool ascii) +{} +#endif /* DEBUG */ +EXPORT_SYMBOL(caam_dump_sg); + +bool caam_little_end; +EXPORT_SYMBOL(caam_little_end); + +bool caam_imx; +EXPORT_SYMBOL(caam_imx); + +size_t caam_ptr_sz; +EXPORT_SYMBOL(caam_ptr_sz); + +static const struct { + u8 value; + const char *error_text; +} desc_error_list[] = { + { 0x00, "No error." }, + { 0x01, "SGT Length Error. The descriptor is trying to read more data than is contained in the SGT table." }, + { 0x02, "SGT Null Entry Error." }, + { 0x03, "Job Ring Control Error. There is a bad value in the Job Ring Control register." }, + { 0x04, "Invalid Descriptor Command. The Descriptor Command field is invalid." }, + { 0x05, "Reserved." }, + { 0x06, "Invalid KEY Command" }, + { 0x07, "Invalid LOAD Command" }, + { 0x08, "Invalid STORE Command" }, + { 0x09, "Invalid OPERATION Command" }, + { 0x0A, "Invalid FIFO LOAD Command" }, + { 0x0B, "Invalid FIFO STORE Command" }, + { 0x0C, "Invalid MOVE/MOVE_LEN Command" }, + { 0x0D, "Invalid JUMP Command. A nonlocal JUMP Command is invalid because the target is not a Job Header Command, or the jump is from a Trusted Descriptor to a Job Descriptor, or because the target Descriptor contains a Shared Descriptor." }, + { 0x0E, "Invalid MATH Command" }, + { 0x0F, "Invalid SIGNATURE Command" }, + { 0x10, "Invalid Sequence Command. A SEQ IN PTR OR SEQ OUT PTR Command is invalid or a SEQ KEY, SEQ LOAD, SEQ FIFO LOAD, or SEQ FIFO STORE decremented the input or output sequence length below 0. This error may result if a built-in PROTOCOL Command has encountered a malformed PDU." }, + { 0x11, "Skip data type invalid. The type must be 0xE or 0xF."}, + { 0x12, "Shared Descriptor Header Error" }, + { 0x13, "Header Error. Invalid length or parity, or certain other problems." }, + { 0x14, "Burster Error. Burster has gotten to an illegal state" }, + { 0x15, "Context Register Length Error. The descriptor is trying to read or write past the end of the Context Register. A SEQ LOAD or SEQ STORE with the VLF bit set was executed with too large a length in the variable length register (VSOL for SEQ STORE or VSIL for SEQ LOAD)." }, + { 0x16, "DMA Error" }, + { 0x17, "Reserved." }, + { 0x1A, "Job failed due to JR reset" }, + { 0x1B, "Job failed due to Fail Mode" }, + { 0x1C, "DECO Watchdog timer timeout error" }, + { 0x1D, "DECO tried to copy a key from another DECO but the other DECO's Key Registers were locked" }, + { 0x1E, "DECO attempted to copy data from a DECO that had an unmasked Descriptor error" }, + { 0x1F, "LIODN error. DECO was trying to share from itself or from another DECO but the two Non-SEQ LIODN values didn't match or the 'shared from' DECO's Descriptor required that the SEQ LIODNs be the same and they aren't." }, + { 0x20, "DECO has completed a reset initiated via the DRR register" }, + { 0x21, "Nonce error. When using EKT (CCM) key encryption option in the FIFO STORE Command, the Nonce counter reached its maximum value and this encryption mode can no longer be used." }, + { 0x22, "Meta data is too large (> 511 bytes) for TLS decap (input frame; block ciphers) and IPsec decap (output frame, when doing the next header byte update) and DCRC (output frame)." }, + { 0x23, "Read Input Frame error" }, + { 0x24, "JDKEK, TDKEK or TDSK not loaded error" }, + { 0x80, "DNR (do not run) error" }, + { 0x81, "undefined protocol command" }, + { 0x82, "invalid setting in PDB" }, + { 0x83, "Anti-replay LATE error" }, + { 0x84, "Anti-replay REPLAY error" }, + { 0x85, "Sequence number overflow" }, + { 0x86, "Sigver invalid signature" }, + { 0x87, "DSA Sign Illegal test descriptor" }, + { 0x88, "Protocol Format Error - A protocol has seen an error in the format of data received. When running RSA, this means that formatting with random padding was used, and did not follow the form: 0x00, 0x02, 8-to-N bytes of non-zero pad, 0x00, F data." }, + { 0x89, "Protocol Size Error - A protocol has seen an error in size. When running RSA, pdb size N < (size of F) when no formatting is used; or pdb size N < (F + 11) when formatting is used." }, + { 0xC1, "Blob Command error: Undefined mode" }, + { 0xC2, "Blob Command error: Secure Memory Blob mode error" }, + { 0xC4, "Blob Command error: Black Blob key or input size error" }, + { 0xC5, "Blob Command error: Invalid key destination" }, + { 0xC8, "Blob Command error: Trusted/Secure mode error" }, + { 0xF0, "IPsec TTL or hop limit field either came in as 0, or was decremented to 0" }, + { 0xF1, "3GPP HFN matches or exceeds the Threshold" }, +}; + +static const struct { + u8 value; + const char *error_text; +} qi_error_list[] = { + { 0x00, "No error" }, + { 0x1F, "Job terminated by FQ or ICID flush" }, + { 0x20, "FD format error"}, + { 0x21, "FD command format error"}, + { 0x23, "FL format error"}, + { 0x25, "CRJD specified in FD, but not enabled in FLC"}, + { 0x30, "Max. buffer size too small"}, + { 0x31, "DHR exceeds max. buffer size (allocate mode, S/G format)"}, + { 0x32, "SGT exceeds max. buffer size (allocate mode, S/G format"}, + { 0x33, "Size over/underflow (allocate mode)"}, + { 0x34, "Size over/underflow (reuse mode)"}, + { 0x35, "Length exceeds max. short length (allocate mode, S/G/ format)"}, + { 0x36, "Memory footprint exceeds max. value (allocate mode, S/G/ format)"}, + { 0x41, "SBC frame format not supported (allocate mode)"}, + { 0x42, "Pool 0 invalid / pool 1 size < pool 0 size (allocate mode)"}, + { 0x43, "Annotation output enabled but ASAR = 0 (allocate mode)"}, + { 0x44, "Unsupported or reserved frame format or SGHR = 1 (reuse mode)"}, + { 0x45, "DHR correction underflow (reuse mode, single buffer format)"}, + { 0x46, "Annotation length exceeds offset (reuse mode)"}, + { 0x48, "Annotation output enabled but ASA limited by ASAR (reuse mode)"}, + { 0x49, "Data offset correction exceeds input frame data length (reuse mode)"}, + { 0x4B, "Annotation output enabled but ASA cannot be expanded (frame list)"}, + { 0x51, "Unsupported IF reuse mode"}, + { 0x52, "Unsupported FL use mode"}, + { 0x53, "Unsupported RJD use mode"}, + { 0x54, "Unsupported inline descriptor use mode"}, + { 0xC0, "Table buffer pool 0 depletion"}, + { 0xC1, "Table buffer pool 1 depletion"}, + { 0xC2, "Data buffer pool 0 depletion, no OF allocated"}, + { 0xC3, "Data buffer pool 1 depletion, no OF allocated"}, + { 0xC4, "Data buffer pool 0 depletion, partial OF allocated"}, + { 0xC5, "Data buffer pool 1 depletion, partial OF allocated"}, + { 0xD0, "FLC read error"}, + { 0xD1, "FL read error"}, + { 0xD2, "FL write error"}, + { 0xD3, "OF SGT write error"}, + { 0xD4, "PTA read error"}, + { 0xD5, "PTA write error"}, + { 0xD6, "OF SGT F-bit write error"}, + { 0xD7, "ASA write error"}, + { 0xE1, "FLC[ICR]=0 ICID error"}, + { 0xE2, "FLC[ICR]=1 ICID error"}, + { 0xE4, "source of ICID flush not trusted (BDI = 0)"}, +}; + +static const char * const cha_id_list[] = { + "", + "AES", + "DES", + "ARC4", + "MDHA", + "RNG", + "SNOW f8", + "Kasumi f8/9", + "PKHA", + "CRCA", + "SNOW f9", + "ZUCE", + "ZUCA", +}; + +static const char * const err_id_list[] = { + "No error.", + "Mode error.", + "Data size error.", + "Key size error.", + "PKHA A memory size error.", + "PKHA B memory size error.", + "Data arrived out of sequence error.", + "PKHA divide-by-zero error.", + "PKHA modulus even error.", + "DES key parity error.", + "ICV check failed.", + "Hardware error.", + "Unsupported CCM AAD size.", + "Class 1 CHA is not reset", + "Invalid CHA combination was selected", + "Invalid CHA selected.", +}; + +static const char * const rng_err_id_list[] = { + "", + "", + "", + "Instantiate", + "Not instantiated", + "Test instantiate", + "Prediction resistance", + "Prediction resistance and test request", + "Uninstantiate", + "Secure key generation", + "", + "Hardware error", + "Continuous check" +}; + +static int report_ccb_status(struct device *jrdev, const u32 status, + const char *error) +{ + u8 cha_id = (status & JRSTA_CCBERR_CHAID_MASK) >> + JRSTA_CCBERR_CHAID_SHIFT; + u8 err_id = status & JRSTA_CCBERR_ERRID_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *cha_str = "unidentified cha_id value 0x"; + char cha_err_code[3] = { 0 }; + const char *err_str = "unidentified err_id value 0x"; + char err_err_code[3] = { 0 }; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + if (cha_id < ARRAY_SIZE(cha_id_list)) + cha_str = cha_id_list[cha_id]; + else + snprintf(cha_err_code, sizeof(cha_err_code), "%02x", cha_id); + + if ((cha_id << JRSTA_CCBERR_CHAID_SHIFT) == JRSTA_CCBERR_CHAID_RNG && + err_id < ARRAY_SIZE(rng_err_id_list) && + strlen(rng_err_id_list[err_id])) { + /* RNG-only error */ + err_str = rng_err_id_list[err_id]; + } else { + err_str = err_id_list[err_id]; + } + + /* + * CCB ICV check failures are part of normal operation life; + * we leave the upper layers to do what they want with them. + */ + if (err_id == JRSTA_CCBERR_ERRID_ICVCHK) + return -EBADMSG; + + dev_err_ratelimited(jrdev, "%08x: %s: %s %d: %s%s: %s%s\n", status, + error, idx_str, idx, cha_str, cha_err_code, + err_str, err_err_code); + + return -EINVAL; +} + +static int report_jump_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +static int report_deco_status(struct device *jrdev, const u32 status, + const char *error) +{ + u8 err_id = status & JRSTA_DECOERR_ERROR_MASK; + u8 idx = (status & JRSTA_DECOERR_INDEX_MASK) >> + JRSTA_DECOERR_INDEX_SHIFT; + char *idx_str; + const char *err_str = "unidentified error value 0x"; + char err_err_code[3] = { 0 }; + int i; + + if (status & JRSTA_DECOERR_JUMP) + idx_str = "jump tgt desc idx"; + else + idx_str = "desc idx"; + + for (i = 0; i < ARRAY_SIZE(desc_error_list); i++) + if (desc_error_list[i].value == err_id) + break; + + if (i != ARRAY_SIZE(desc_error_list) && desc_error_list[i].error_text) + err_str = desc_error_list[i].error_text; + else + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + + dev_err(jrdev, "%08x: %s: %s %d: %s%s\n", + status, error, idx_str, idx, err_str, err_err_code); + + return -EINVAL; +} + +static int report_qi_status(struct device *qidev, const u32 status, + const char *error) +{ + u8 err_id = status & JRSTA_QIERR_ERROR_MASK; + const char *err_str = "unidentified error value 0x"; + char err_err_code[3] = { 0 }; + int i; + + for (i = 0; i < ARRAY_SIZE(qi_error_list); i++) + if (qi_error_list[i].value == err_id) + break; + + if (i != ARRAY_SIZE(qi_error_list) && qi_error_list[i].error_text) + err_str = qi_error_list[i].error_text; + else + snprintf(err_err_code, sizeof(err_err_code), "%02x", err_id); + + dev_err(qidev, "%08x: %s: %s%s\n", + status, error, err_str, err_err_code); + + return -EINVAL; +} + +static int report_jr_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +static int report_cond_code_status(struct device *jrdev, const u32 status, + const char *error) +{ + dev_err(jrdev, "%08x: %s: %s() not implemented\n", + status, error, __func__); + + return -EINVAL; +} + +int caam_strstatus(struct device *jrdev, u32 status, bool qi_v2) +{ + static const struct stat_src { + int (*report_ssed)(struct device *jrdev, const u32 status, + const char *error); + const char *error; + } status_src[16] = { + { NULL, "No error" }, + { NULL, NULL }, + { report_ccb_status, "CCB" }, + { report_jump_status, "Jump" }, + { report_deco_status, "DECO" }, + { report_qi_status, "Queue Manager Interface" }, + { report_jr_status, "Job Ring" }, + { report_cond_code_status, "Condition Code" }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + { NULL, NULL }, + }; + u32 ssrc = status >> JRSTA_SSRC_SHIFT; + const char *error = status_src[ssrc].error; + + /* + * If there is an error handling function, call it to report the error. + * Otherwise print the error source name. + */ + if (status_src[ssrc].report_ssed) + return status_src[ssrc].report_ssed(jrdev, status, error); + + if (error) + dev_err(jrdev, "%d: %s\n", ssrc, error); + else + dev_err(jrdev, "%d: unknown error source\n", ssrc); + + return -EINVAL; +} +EXPORT_SYMBOL(caam_strstatus); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("FSL CAAM error reporting"); +MODULE_AUTHOR("Freescale Semiconductor"); -- cgit v1.2.3