From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c | 544 +++++++++++++++++++++ 1 file changed, 544 insertions(+) create mode 100644 drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c (limited to 'drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c') diff --git a/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c b/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c new file mode 100644 index 000000000..811ded72c --- /dev/null +++ b/drivers/crypto/marvell/octeontx2/otx2_cptvf_reqmgr.c @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* Copyright (C) 2020 Marvell. */ + +#include "otx2_cptvf.h" +#include "otx2_cpt_common.h" + +/* SG list header size in bytes */ +#define SG_LIST_HDR_SIZE 8 + +/* Default timeout when waiting for free pending entry in us */ +#define CPT_PENTRY_TIMEOUT 1000 +#define CPT_PENTRY_STEP 50 + +/* Default threshold for stopping and resuming sender requests */ +#define CPT_IQ_STOP_MARGIN 128 +#define CPT_IQ_RESUME_MARGIN 512 + +/* Default command timeout in seconds */ +#define CPT_COMMAND_TIMEOUT 4 +#define CPT_TIME_IN_RESET_COUNT 5 + +static void otx2_cpt_dump_sg_list(struct pci_dev *pdev, + struct otx2_cpt_req_info *req) +{ + int i; + + pr_debug("Gather list size %d\n", req->in_cnt); + for (i = 0; i < req->in_cnt; i++) { + pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i, + req->in[i].size, req->in[i].vptr, + (void *) req->in[i].dma_addr); + pr_debug("Buffer hexdump (%d bytes)\n", + req->in[i].size); + print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, + req->in[i].vptr, req->in[i].size, false); + } + pr_debug("Scatter list size %d\n", req->out_cnt); + for (i = 0; i < req->out_cnt; i++) { + pr_debug("Buffer %d size %d, vptr 0x%p, dmaptr 0x%p\n", i, + req->out[i].size, req->out[i].vptr, + (void *) req->out[i].dma_addr); + pr_debug("Buffer hexdump (%d bytes)\n", req->out[i].size); + print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, + req->out[i].vptr, req->out[i].size, false); + } +} + +static inline struct otx2_cpt_pending_entry *get_free_pending_entry( + struct otx2_cpt_pending_queue *q, + int qlen) +{ + struct otx2_cpt_pending_entry *ent = NULL; + + ent = &q->head[q->rear]; + if (unlikely(ent->busy)) + return NULL; + + q->rear++; + if (unlikely(q->rear == qlen)) + q->rear = 0; + + return ent; +} + +static inline u32 modulo_inc(u32 index, u32 length, u32 inc) +{ + if (WARN_ON(inc > length)) + inc = length; + + index += inc; + if (unlikely(index >= length)) + index -= length; + + return index; +} + +static inline void free_pentry(struct otx2_cpt_pending_entry *pentry) +{ + pentry->completion_addr = NULL; + pentry->info = NULL; + pentry->callback = NULL; + pentry->areq = NULL; + pentry->resume_sender = false; + pentry->busy = false; +} + +static inline int setup_sgio_components(struct pci_dev *pdev, + struct otx2_cpt_buf_ptr *list, + int buf_count, u8 *buffer) +{ + struct otx2_cpt_sglist_component *sg_ptr = NULL; + int ret = 0, i, j; + int components; + + if (unlikely(!list)) { + dev_err(&pdev->dev, "Input list pointer is NULL\n"); + return -EFAULT; + } + + for (i = 0; i < buf_count; i++) { + if (unlikely(!list[i].vptr)) + continue; + list[i].dma_addr = dma_map_single(&pdev->dev, list[i].vptr, + list[i].size, + DMA_BIDIRECTIONAL); + if (unlikely(dma_mapping_error(&pdev->dev, list[i].dma_addr))) { + dev_err(&pdev->dev, "Dma mapping failed\n"); + ret = -EIO; + goto sg_cleanup; + } + } + components = buf_count / 4; + sg_ptr = (struct otx2_cpt_sglist_component *)buffer; + for (i = 0; i < components; i++) { + sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size); + sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size); + sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size); + sg_ptr->len3 = cpu_to_be16(list[i * 4 + 3].size); + sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr); + sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr); + sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr); + sg_ptr->ptr3 = cpu_to_be64(list[i * 4 + 3].dma_addr); + sg_ptr++; + } + components = buf_count % 4; + + switch (components) { + case 3: + sg_ptr->len2 = cpu_to_be16(list[i * 4 + 2].size); + sg_ptr->ptr2 = cpu_to_be64(list[i * 4 + 2].dma_addr); + fallthrough; + case 2: + sg_ptr->len1 = cpu_to_be16(list[i * 4 + 1].size); + sg_ptr->ptr1 = cpu_to_be64(list[i * 4 + 1].dma_addr); + fallthrough; + case 1: + sg_ptr->len0 = cpu_to_be16(list[i * 4 + 0].size); + sg_ptr->ptr0 = cpu_to_be64(list[i * 4 + 0].dma_addr); + break; + default: + break; + } + return ret; + +sg_cleanup: + for (j = 0; j < i; j++) { + if (list[j].dma_addr) { + dma_unmap_single(&pdev->dev, list[j].dma_addr, + list[j].size, DMA_BIDIRECTIONAL); + } + + list[j].dma_addr = 0; + } + return ret; +} + +static inline struct otx2_cpt_inst_info *info_create(struct pci_dev *pdev, + struct otx2_cpt_req_info *req, + gfp_t gfp) +{ + int align = OTX2_CPT_DMA_MINALIGN; + struct otx2_cpt_inst_info *info; + u32 dlen, align_dlen, info_len; + u16 g_sz_bytes, s_sz_bytes; + u32 total_mem_len; + + if (unlikely(req->in_cnt > OTX2_CPT_MAX_SG_IN_CNT || + req->out_cnt > OTX2_CPT_MAX_SG_OUT_CNT)) { + dev_err(&pdev->dev, "Error too many sg components\n"); + return NULL; + } + + g_sz_bytes = ((req->in_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + s_sz_bytes = ((req->out_cnt + 3) / 4) * + sizeof(struct otx2_cpt_sglist_component); + + dlen = g_sz_bytes + s_sz_bytes + SG_LIST_HDR_SIZE; + align_dlen = ALIGN(dlen, align); + info_len = ALIGN(sizeof(*info), align); + total_mem_len = align_dlen + info_len + sizeof(union otx2_cpt_res_s); + + info = kzalloc(total_mem_len, gfp); + if (unlikely(!info)) + return NULL; + + info->dlen = dlen; + info->in_buffer = (u8 *)info + info_len; + + ((u16 *)info->in_buffer)[0] = req->out_cnt; + ((u16 *)info->in_buffer)[1] = req->in_cnt; + ((u16 *)info->in_buffer)[2] = 0; + ((u16 *)info->in_buffer)[3] = 0; + cpu_to_be64s((u64 *)info->in_buffer); + + /* Setup gather (input) components */ + if (setup_sgio_components(pdev, req->in, req->in_cnt, + &info->in_buffer[8])) { + dev_err(&pdev->dev, "Failed to setup gather list\n"); + goto destroy_info; + } + + if (setup_sgio_components(pdev, req->out, req->out_cnt, + &info->in_buffer[8 + g_sz_bytes])) { + dev_err(&pdev->dev, "Failed to setup scatter list\n"); + goto destroy_info; + } + + info->dma_len = total_mem_len - info_len; + info->dptr_baddr = dma_map_single(&pdev->dev, info->in_buffer, + info->dma_len, DMA_BIDIRECTIONAL); + if (unlikely(dma_mapping_error(&pdev->dev, info->dptr_baddr))) { + dev_err(&pdev->dev, "DMA Mapping failed for cpt req\n"); + goto destroy_info; + } + /* + * Get buffer for union otx2_cpt_res_s response + * structure and its physical address + */ + info->completion_addr = info->in_buffer + align_dlen; + info->comp_baddr = info->dptr_baddr + align_dlen; + + return info; + +destroy_info: + otx2_cpt_info_destroy(pdev, info); + return NULL; +} + +static int process_request(struct pci_dev *pdev, struct otx2_cpt_req_info *req, + struct otx2_cpt_pending_queue *pqueue, + struct otx2_cptlf_info *lf) +{ + struct otx2_cptvf_request *cpt_req = &req->req; + struct otx2_cpt_pending_entry *pentry = NULL; + union otx2_cpt_ctrl_info *ctrl = &req->ctrl; + struct otx2_cpt_inst_info *info = NULL; + union otx2_cpt_res_s *result = NULL; + struct otx2_cpt_iq_command iq_cmd; + union otx2_cpt_inst_s cptinst; + int retry, ret = 0; + u8 resume_sender; + gfp_t gfp; + + gfp = (req->areq->flags & CRYPTO_TFM_REQ_MAY_SLEEP) ? GFP_KERNEL : + GFP_ATOMIC; + if (unlikely(!otx2_cptlf_started(lf->lfs))) + return -ENODEV; + + info = info_create(pdev, req, gfp); + if (unlikely(!info)) { + dev_err(&pdev->dev, "Setting up cpt inst info failed"); + return -ENOMEM; + } + cpt_req->dlen = info->dlen; + + result = info->completion_addr; + result->s.compcode = OTX2_CPT_COMPLETION_CODE_INIT; + + spin_lock_bh(&pqueue->lock); + pentry = get_free_pending_entry(pqueue, pqueue->qlen); + retry = CPT_PENTRY_TIMEOUT / CPT_PENTRY_STEP; + while (unlikely(!pentry) && retry--) { + spin_unlock_bh(&pqueue->lock); + udelay(CPT_PENTRY_STEP); + spin_lock_bh(&pqueue->lock); + pentry = get_free_pending_entry(pqueue, pqueue->qlen); + } + + if (unlikely(!pentry)) { + ret = -ENOSPC; + goto destroy_info; + } + + /* + * Check if we are close to filling in entire pending queue, + * if so then tell the sender to stop/sleep by returning -EBUSY + * We do it only for context which can sleep (GFP_KERNEL) + */ + if (gfp == GFP_KERNEL && + pqueue->pending_count > (pqueue->qlen - CPT_IQ_STOP_MARGIN)) { + pentry->resume_sender = true; + } else + pentry->resume_sender = false; + resume_sender = pentry->resume_sender; + pqueue->pending_count++; + + pentry->completion_addr = info->completion_addr; + pentry->info = info; + pentry->callback = req->callback; + pentry->areq = req->areq; + pentry->busy = true; + info->pentry = pentry; + info->time_in = jiffies; + info->req = req; + + /* Fill in the command */ + iq_cmd.cmd.u = 0; + iq_cmd.cmd.s.opcode = cpu_to_be16(cpt_req->opcode.flags); + iq_cmd.cmd.s.param1 = cpu_to_be16(cpt_req->param1); + iq_cmd.cmd.s.param2 = cpu_to_be16(cpt_req->param2); + iq_cmd.cmd.s.dlen = cpu_to_be16(cpt_req->dlen); + + /* 64-bit swap for microcode data reads, not needed for addresses*/ + cpu_to_be64s(&iq_cmd.cmd.u); + iq_cmd.dptr = info->dptr_baddr; + iq_cmd.rptr = 0; + iq_cmd.cptr.u = 0; + iq_cmd.cptr.s.grp = ctrl->s.grp; + + /* Fill in the CPT_INST_S type command for HW interpretation */ + otx2_cpt_fill_inst(&cptinst, &iq_cmd, info->comp_baddr); + + /* Print debug info if enabled */ + otx2_cpt_dump_sg_list(pdev, req); + pr_debug("Cpt_inst_s hexdump (%d bytes)\n", OTX2_CPT_INST_SIZE); + print_hex_dump_debug("", 0, 16, 1, &cptinst, OTX2_CPT_INST_SIZE, false); + pr_debug("Dptr hexdump (%d bytes)\n", cpt_req->dlen); + print_hex_dump_debug("", 0, 16, 1, info->in_buffer, + cpt_req->dlen, false); + + /* Send CPT command */ + lf->lfs->ops->send_cmd(&cptinst, 1, lf); + + /* + * We allocate and prepare pending queue entry in critical section + * together with submitting CPT instruction to CPT instruction queue + * to make sure that order of CPT requests is the same in both + * pending and instruction queues + */ + spin_unlock_bh(&pqueue->lock); + + ret = resume_sender ? -EBUSY : -EINPROGRESS; + return ret; + +destroy_info: + spin_unlock_bh(&pqueue->lock); + otx2_cpt_info_destroy(pdev, info); + return ret; +} + +int otx2_cpt_do_request(struct pci_dev *pdev, struct otx2_cpt_req_info *req, + int cpu_num) +{ + struct otx2_cptvf_dev *cptvf = pci_get_drvdata(pdev); + struct otx2_cptlfs_info *lfs = &cptvf->lfs; + + return process_request(lfs->pdev, req, &lfs->lf[cpu_num].pqueue, + &lfs->lf[cpu_num]); +} + +static int cpt_process_ccode(struct otx2_cptlfs_info *lfs, + union otx2_cpt_res_s *cpt_status, + struct otx2_cpt_inst_info *info, + u32 *res_code) +{ + u8 uc_ccode = lfs->ops->cpt_get_uc_compcode(cpt_status); + u8 ccode = lfs->ops->cpt_get_compcode(cpt_status); + struct pci_dev *pdev = lfs->pdev; + + switch (ccode) { + case OTX2_CPT_COMP_E_FAULT: + dev_err(&pdev->dev, + "Request failed with DMA fault\n"); + otx2_cpt_dump_sg_list(pdev, info->req); + break; + + case OTX2_CPT_COMP_E_HWERR: + dev_err(&pdev->dev, + "Request failed with hardware error\n"); + otx2_cpt_dump_sg_list(pdev, info->req); + break; + + case OTX2_CPT_COMP_E_INSTERR: + dev_err(&pdev->dev, + "Request failed with instruction error\n"); + otx2_cpt_dump_sg_list(pdev, info->req); + break; + + case OTX2_CPT_COMP_E_NOTDONE: + /* check for timeout */ + if (time_after_eq(jiffies, info->time_in + + CPT_COMMAND_TIMEOUT * HZ)) + dev_warn(&pdev->dev, + "Request timed out 0x%p", info->req); + else if (info->extra_time < CPT_TIME_IN_RESET_COUNT) { + info->time_in = jiffies; + info->extra_time++; + } + return 1; + + case OTX2_CPT_COMP_E_GOOD: + case OTX2_CPT_COMP_E_WARN: + /* + * Check microcode completion code, it is only valid + * when completion code is CPT_COMP_E::GOOD + */ + if (uc_ccode != OTX2_CPT_UCC_SUCCESS) { + /* + * If requested hmac is truncated and ucode returns + * s/g write length error then we report success + * because ucode writes as many bytes of calculated + * hmac as available in gather buffer and reports + * s/g write length error if number of bytes in gather + * buffer is less than full hmac size. + */ + if (info->req->is_trunc_hmac && + uc_ccode == OTX2_CPT_UCC_SG_WRITE_LENGTH) { + *res_code = 0; + break; + } + + dev_err(&pdev->dev, + "Request failed with software error code 0x%x\n", + cpt_status->s.uc_compcode); + otx2_cpt_dump_sg_list(pdev, info->req); + break; + } + /* Request has been processed with success */ + *res_code = 0; + break; + + default: + dev_err(&pdev->dev, + "Request returned invalid status %d\n", ccode); + break; + } + return 0; +} + +static inline void process_pending_queue(struct otx2_cptlfs_info *lfs, + struct otx2_cpt_pending_queue *pqueue) +{ + struct otx2_cpt_pending_entry *resume_pentry = NULL; + void (*callback)(int status, void *arg, void *req); + struct otx2_cpt_pending_entry *pentry = NULL; + union otx2_cpt_res_s *cpt_status = NULL; + struct otx2_cpt_inst_info *info = NULL; + struct otx2_cpt_req_info *req = NULL; + struct crypto_async_request *areq; + struct pci_dev *pdev = lfs->pdev; + u32 res_code, resume_index; + + while (1) { + spin_lock_bh(&pqueue->lock); + pentry = &pqueue->head[pqueue->front]; + + if (WARN_ON(!pentry)) { + spin_unlock_bh(&pqueue->lock); + break; + } + + res_code = -EINVAL; + if (unlikely(!pentry->busy)) { + spin_unlock_bh(&pqueue->lock); + break; + } + + if (unlikely(!pentry->callback)) { + dev_err(&pdev->dev, "Callback NULL\n"); + goto process_pentry; + } + + info = pentry->info; + if (unlikely(!info)) { + dev_err(&pdev->dev, "Pending entry post arg NULL\n"); + goto process_pentry; + } + + req = info->req; + if (unlikely(!req)) { + dev_err(&pdev->dev, "Request NULL\n"); + goto process_pentry; + } + + cpt_status = pentry->completion_addr; + if (unlikely(!cpt_status)) { + dev_err(&pdev->dev, "Completion address NULL\n"); + goto process_pentry; + } + + if (cpt_process_ccode(lfs, cpt_status, info, &res_code)) { + spin_unlock_bh(&pqueue->lock); + return; + } + info->pdev = pdev; + +process_pentry: + /* + * Check if we should inform sending side to resume + * We do it CPT_IQ_RESUME_MARGIN elements in advance before + * pending queue becomes empty + */ + resume_index = modulo_inc(pqueue->front, pqueue->qlen, + CPT_IQ_RESUME_MARGIN); + resume_pentry = &pqueue->head[resume_index]; + if (resume_pentry && + resume_pentry->resume_sender) { + resume_pentry->resume_sender = false; + callback = resume_pentry->callback; + areq = resume_pentry->areq; + + if (callback) { + spin_unlock_bh(&pqueue->lock); + + /* + * EINPROGRESS is an indication for sending + * side that it can resume sending requests + */ + callback(-EINPROGRESS, areq, info); + spin_lock_bh(&pqueue->lock); + } + } + + callback = pentry->callback; + areq = pentry->areq; + free_pentry(pentry); + + pqueue->pending_count--; + pqueue->front = modulo_inc(pqueue->front, pqueue->qlen, 1); + spin_unlock_bh(&pqueue->lock); + + /* + * Call callback after current pending entry has been + * processed, we don't do it if the callback pointer is + * invalid. + */ + if (callback) + callback(res_code, areq, info); + } +} + +void otx2_cpt_post_process(struct otx2_cptlf_wqe *wqe) +{ + process_pending_queue(wqe->lfs, + &wqe->lfs->lf[wqe->lf_num].pqueue); +} + +int otx2_cpt_get_kcrypto_eng_grp_num(struct pci_dev *pdev) +{ + struct otx2_cptvf_dev *cptvf = pci_get_drvdata(pdev); + + return cptvf->lfs.kcrypto_eng_grp_num; +} -- cgit v1.2.3