From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/crypto/nx/nx-842.h | 189 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 drivers/crypto/nx/nx-842.h (limited to 'drivers/crypto/nx/nx-842.h') diff --git a/drivers/crypto/nx/nx-842.h b/drivers/crypto/nx/nx-842.h new file mode 100644 index 000000000..7590bfb24 --- /dev/null +++ b/drivers/crypto/nx/nx-842.h @@ -0,0 +1,189 @@ +/* SPDX-License-Identifier: GPL-2.0 */ + +#ifndef __NX_842_H__ +#define __NX_842_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* Restrictions on Data Descriptor List (DDL) and Entry (DDE) buffers + * + * From NX P8 workbook, sec 4.9.1 "842 details" + * Each DDE buffer is 128 byte aligned + * Each DDE buffer size is a multiple of 32 bytes (except the last) + * The last DDE buffer size is a multiple of 8 bytes + */ +#define DDE_BUFFER_ALIGN (128) +#define DDE_BUFFER_SIZE_MULT (32) +#define DDE_BUFFER_LAST_MULT (8) + +/* Arbitrary DDL length limit + * Allows max buffer size of MAX-1 to MAX pages + * (depending on alignment) + */ +#define DDL_LEN_MAX (17) + +/* CCW 842 CI/FC masks + * NX P8 workbook, section 4.3.1, figure 4-6 + * "CI/FC Boundary by NX CT type" + */ +#define CCW_CI_842 (0x00003ff8) +#define CCW_FC_842 (0x00000007) + +/* CCW Function Codes (FC) for 842 + * NX P8 workbook, section 4.9, table 4-28 + * "Function Code Definitions for 842 Memory Compression" + */ +#define CCW_FC_842_COMP_NOCRC (0) +#define CCW_FC_842_COMP_CRC (1) +#define CCW_FC_842_DECOMP_NOCRC (2) +#define CCW_FC_842_DECOMP_CRC (3) +#define CCW_FC_842_MOVE (4) + +/* CSB CC Error Types for 842 + * NX P8 workbook, section 4.10.3, table 4-30 + * "Reported Error Types Summary Table" + */ +/* These are all duplicates of existing codes defined in icswx.h. */ +#define CSB_CC_TRANSLATION_DUP1 (80) +#define CSB_CC_TRANSLATION_DUP2 (82) +#define CSB_CC_TRANSLATION_DUP3 (84) +#define CSB_CC_TRANSLATION_DUP4 (86) +#define CSB_CC_TRANSLATION_DUP5 (92) +#define CSB_CC_TRANSLATION_DUP6 (94) +#define CSB_CC_PROTECTION_DUP1 (81) +#define CSB_CC_PROTECTION_DUP2 (83) +#define CSB_CC_PROTECTION_DUP3 (85) +#define CSB_CC_PROTECTION_DUP4 (87) +#define CSB_CC_PROTECTION_DUP5 (93) +#define CSB_CC_PROTECTION_DUP6 (95) +#define CSB_CC_RD_EXTERNAL_DUP1 (89) +#define CSB_CC_RD_EXTERNAL_DUP2 (90) +#define CSB_CC_RD_EXTERNAL_DUP3 (91) +/* These are specific to NX */ +/* 842 codes */ +#define CSB_CC_TPBC_GT_SPBC (64) /* no error, but >1 comp ratio */ +#define CSB_CC_CRC_MISMATCH (65) /* decomp crc mismatch */ +#define CSB_CC_TEMPL_INVALID (66) /* decomp invalid template value */ +#define CSB_CC_TEMPL_OVERFLOW (67) /* decomp template shows data after end */ +/* sym crypt codes */ +#define CSB_CC_DECRYPT_OVERFLOW (64) +/* asym crypt codes */ +#define CSB_CC_MINV_OVERFLOW (128) +/* + * HW error - Job did not finish in the maximum time allowed. + * Job terminated. + */ +#define CSB_CC_HW_EXPIRED_TIMER (224) +/* These are reserved for hypervisor use */ +#define CSB_CC_HYP_RESERVE_START (240) +#define CSB_CC_HYP_RESERVE_END (253) +#define CSB_CC_HYP_RESERVE_P9_END (251) +/* No valid interrupt server (P9 or later). */ +#define CSB_CC_HYP_RESERVE_NO_INTR_SERVER (252) +#define CSB_CC_HYP_NO_HW (254) +#define CSB_CC_HYP_HANG_ABORTED (255) + +/* CCB Completion Modes (CM) for 842 + * NX P8 workbook, section 4.3, figure 4-5 + * "CRB Details - Normal Cop_Req (CL=00, C=1)" + */ +#define CCB_CM_EXTRA_WRITE (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_STORE) +#define CCB_CM_INTERRUPT (CCB_CM0_ALL_COMPLETIONS & CCB_CM12_INTERRUPT) + +#define LEN_ON_SIZE(pa, size) ((size) - ((pa) & ((size) - 1))) +#define LEN_ON_PAGE(pa) LEN_ON_SIZE(pa, PAGE_SIZE) + +static inline unsigned long nx842_get_pa(void *addr) +{ + if (!is_vmalloc_addr(addr)) + return __pa(addr); + + return page_to_phys(vmalloc_to_page(addr)) + offset_in_page(addr); +} + +/** + * This provides the driver's constraints. Different nx842 implementations + * may have varying requirements. The constraints are: + * @alignment: All buffers should be aligned to this + * @multiple: All buffer lengths should be a multiple of this + * @minimum: Buffer lengths must not be less than this amount + * @maximum: Buffer lengths must not be more than this amount + * + * The constraints apply to all buffers and lengths, both input and output, + * for both compression and decompression, except for the minimum which + * only applies to compression input and decompression output; the + * compressed data can be less than the minimum constraint. It can be + * assumed that compressed data will always adhere to the multiple + * constraint. + * + * The driver may succeed even if these constraints are violated; + * however the driver can return failure or suffer reduced performance + * if any constraint is not met. + */ +struct nx842_constraints { + int alignment; + int multiple; + int minimum; + int maximum; +}; + +struct nx842_driver { + char *name; + struct module *owner; + size_t workmem_size; + + struct nx842_constraints *constraints; + + int (*compress)(const unsigned char *in, unsigned int in_len, + unsigned char *out, unsigned int *out_len, + void *wrkmem); + int (*decompress)(const unsigned char *in, unsigned int in_len, + unsigned char *out, unsigned int *out_len, + void *wrkmem); +}; + +struct nx842_crypto_header_group { + __be16 padding; /* unused bytes at start of group */ + __be32 compressed_length; /* compressed bytes in group */ + __be32 uncompressed_length; /* bytes after decompression */ +} __packed; + +struct nx842_crypto_header { + __be16 magic; /* NX842_CRYPTO_MAGIC */ + __be16 ignore; /* decompressed end bytes to ignore */ + u8 groups; /* total groups in this header */ + struct nx842_crypto_header_group group[]; +} __packed; + +#define NX842_CRYPTO_GROUP_MAX (0x20) + +struct nx842_crypto_ctx { + spinlock_t lock; + + u8 *wmem; + u8 *sbounce, *dbounce; + + struct nx842_crypto_header header; + struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX]; + + struct nx842_driver *driver; +}; + +int nx842_crypto_init(struct crypto_tfm *tfm, struct nx842_driver *driver); +void nx842_crypto_exit(struct crypto_tfm *tfm); +int nx842_crypto_compress(struct crypto_tfm *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int *dlen); +int nx842_crypto_decompress(struct crypto_tfm *tfm, + const u8 *src, unsigned int slen, + u8 *dst, unsigned int *dlen); + +#endif /* __NX_842_H__ */ -- cgit v1.2.3