From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/cxl/cxlmem.h | 467 +++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 467 insertions(+) create mode 100644 drivers/cxl/cxlmem.h (limited to 'drivers/cxl/cxlmem.h') diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h new file mode 100644 index 000000000..ab138004f --- /dev/null +++ b/drivers/cxl/cxlmem.h @@ -0,0 +1,467 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* Copyright(c) 2020-2021 Intel Corporation. */ +#ifndef __CXL_MEM_H__ +#define __CXL_MEM_H__ +#include +#include +#include "cxl.h" + +/* CXL 2.0 8.2.8.5.1.1 Memory Device Status Register */ +#define CXLMDEV_STATUS_OFFSET 0x0 +#define CXLMDEV_DEV_FATAL BIT(0) +#define CXLMDEV_FW_HALT BIT(1) +#define CXLMDEV_STATUS_MEDIA_STATUS_MASK GENMASK(3, 2) +#define CXLMDEV_MS_NOT_READY 0 +#define CXLMDEV_MS_READY 1 +#define CXLMDEV_MS_ERROR 2 +#define CXLMDEV_MS_DISABLED 3 +#define CXLMDEV_READY(status) \ + (FIELD_GET(CXLMDEV_STATUS_MEDIA_STATUS_MASK, status) == \ + CXLMDEV_MS_READY) +#define CXLMDEV_MBOX_IF_READY BIT(4) +#define CXLMDEV_RESET_NEEDED_MASK GENMASK(7, 5) +#define CXLMDEV_RESET_NEEDED_NOT 0 +#define CXLMDEV_RESET_NEEDED_COLD 1 +#define CXLMDEV_RESET_NEEDED_WARM 2 +#define CXLMDEV_RESET_NEEDED_HOT 3 +#define CXLMDEV_RESET_NEEDED_CXL 4 +#define CXLMDEV_RESET_NEEDED(status) \ + (FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) != \ + CXLMDEV_RESET_NEEDED_NOT) + +/** + * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device + * @dev: driver core device object + * @cdev: char dev core object for ioctl operations + * @cxlds: The device state backing this device + * @detach_work: active memdev lost a port in its ancestry + * @cxl_nvb: coordinate removal of @cxl_nvd if present + * @cxl_nvd: optional bridge to an nvdimm if the device supports pmem + * @id: id number of this memdev instance. + */ +struct cxl_memdev { + struct device dev; + struct cdev cdev; + struct cxl_dev_state *cxlds; + struct work_struct detach_work; + struct cxl_nvdimm_bridge *cxl_nvb; + struct cxl_nvdimm *cxl_nvd; + int id; +}; + +static inline struct cxl_memdev *to_cxl_memdev(struct device *dev) +{ + return container_of(dev, struct cxl_memdev, dev); +} + +static inline struct cxl_port *cxled_to_port(struct cxl_endpoint_decoder *cxled) +{ + return to_cxl_port(cxled->cxld.dev.parent); +} + +static inline struct cxl_port *cxlrd_to_port(struct cxl_root_decoder *cxlrd) +{ + return to_cxl_port(cxlrd->cxlsd.cxld.dev.parent); +} + +static inline struct cxl_memdev * +cxled_to_memdev(struct cxl_endpoint_decoder *cxled) +{ + struct cxl_port *port = to_cxl_port(cxled->cxld.dev.parent); + + return to_cxl_memdev(port->uport); +} + +bool is_cxl_memdev(struct device *dev); +static inline bool is_cxl_endpoint(struct cxl_port *port) +{ + return is_cxl_memdev(port->uport); +} + +struct cxl_memdev *devm_cxl_add_memdev(struct cxl_dev_state *cxlds); + +static inline struct cxl_ep *cxl_ep_load(struct cxl_port *port, + struct cxl_memdev *cxlmd) +{ + if (!port) + return NULL; + + return xa_load(&port->endpoints, (unsigned long)&cxlmd->dev); +} + +/** + * struct cxl_mbox_cmd - A command to be submitted to hardware. + * @opcode: (input) The command set and command submitted to hardware. + * @payload_in: (input) Pointer to the input payload. + * @payload_out: (output) Pointer to the output payload. Must be allocated by + * the caller. + * @size_in: (input) Number of bytes to load from @payload_in. + * @size_out: (input) Max number of bytes loaded into @payload_out. + * (output) Number of bytes generated by the device. For fixed size + * outputs commands this is always expected to be deterministic. For + * variable sized output commands, it tells the exact number of bytes + * written. + * @min_out: (input) internal command output payload size validation + * @return_code: (output) Error code returned from hardware. + * + * This is the primary mechanism used to send commands to the hardware. + * All the fields except @payload_* correspond exactly to the fields described in + * Command Register section of the CXL 2.0 8.2.8.4.5. @payload_in and + * @payload_out are written to, and read from the Command Payload Registers + * defined in CXL 2.0 8.2.8.4.8. + */ +struct cxl_mbox_cmd { + u16 opcode; + void *payload_in; + void *payload_out; + size_t size_in; + size_t size_out; + size_t min_out; + u16 return_code; +}; + +/* + * Per CXL 2.0 Section 8.2.8.4.5.1 + */ +#define CMD_CMD_RC_TABLE \ + C(SUCCESS, 0, NULL), \ + C(BACKGROUND, -ENXIO, "background cmd started successfully"), \ + C(INPUT, -ENXIO, "cmd input was invalid"), \ + C(UNSUPPORTED, -ENXIO, "cmd is not supported"), \ + C(INTERNAL, -ENXIO, "internal device error"), \ + C(RETRY, -ENXIO, "temporary error, retry once"), \ + C(BUSY, -ENXIO, "ongoing background operation"), \ + C(MEDIADISABLED, -ENXIO, "media access is disabled"), \ + C(FWINPROGRESS, -ENXIO, "one FW package can be transferred at a time"), \ + C(FWOOO, -ENXIO, "FW package content was transferred out of order"), \ + C(FWAUTH, -ENXIO, "FW package authentication failed"), \ + C(FWSLOT, -ENXIO, "FW slot is not supported for requested operation"), \ + C(FWROLLBACK, -ENXIO, "rolled back to the previous active FW"), \ + C(FWRESET, -ENXIO, "FW failed to activate, needs cold reset"), \ + C(HANDLE, -ENXIO, "one or more Event Record Handles were invalid"), \ + C(PADDR, -ENXIO, "physical address specified is invalid"), \ + C(POISONLMT, -ENXIO, "poison injection limit has been reached"), \ + C(MEDIAFAILURE, -ENXIO, "permanent issue with the media"), \ + C(ABORT, -ENXIO, "background cmd was aborted by device"), \ + C(SECURITY, -ENXIO, "not valid in the current security state"), \ + C(PASSPHRASE, -ENXIO, "phrase doesn't match current set passphrase"), \ + C(MBUNSUPPORTED, -ENXIO, "unsupported on the mailbox it was issued on"),\ + C(PAYLOADLEN, -ENXIO, "invalid payload length") + +#undef C +#define C(a, b, c) CXL_MBOX_CMD_RC_##a +enum { CMD_CMD_RC_TABLE }; +#undef C +#define C(a, b, c) { b, c } +struct cxl_mbox_cmd_rc { + int err; + const char *desc; +}; + +static const +struct cxl_mbox_cmd_rc cxl_mbox_cmd_rctable[] ={ CMD_CMD_RC_TABLE }; +#undef C + +static inline const char *cxl_mbox_cmd_rc2str(struct cxl_mbox_cmd *mbox_cmd) +{ + return cxl_mbox_cmd_rctable[mbox_cmd->return_code].desc; +} + +static inline int cxl_mbox_cmd_rc2errno(struct cxl_mbox_cmd *mbox_cmd) +{ + return cxl_mbox_cmd_rctable[mbox_cmd->return_code].err; +} + +/* + * CXL 2.0 - Memory capacity multiplier + * See Section 8.2.9.5 + * + * Volatile, Persistent, and Partition capacities are specified to be in + * multiples of 256MB - define a multiplier to convert to/from bytes. + */ +#define CXL_CAPACITY_MULTIPLIER SZ_256M + +/** + * struct cxl_endpoint_dvsec_info - Cached DVSEC info + * @mem_enabled: cached value of mem_enabled in the DVSEC, PCIE_DEVICE + * @ranges: Number of active HDM ranges this device uses. + * @dvsec_range: cached attributes of the ranges in the DVSEC, PCIE_DEVICE + */ +struct cxl_endpoint_dvsec_info { + bool mem_enabled; + int ranges; + struct range dvsec_range[2]; +}; + +/** + * struct cxl_dev_state - The driver device state + * + * cxl_dev_state represents the CXL driver/device state. It provides an + * interface to mailbox commands as well as some cached data about the device. + * Currently only memory devices are represented. + * + * @dev: The device associated with this CXL state + * @cxlmd: The device representing the CXL.mem capabilities of @dev + * @regs: Parsed register blocks + * @cxl_dvsec: Offset to the PCIe device DVSEC + * @rcd: operating in RCD mode (CXL 3.0 9.11.8 CXL Devices Attached to an RCH) + * @payload_size: Size of space for payload + * (CXL 2.0 8.2.8.4.3 Mailbox Capabilities Register) + * @lsa_size: Size of Label Storage Area + * (CXL 2.0 8.2.9.5.1.1 Identify Memory Device) + * @mbox_mutex: Mutex to synchronize mailbox access. + * @firmware_version: Firmware version for the memory device. + * @enabled_cmds: Hardware commands found enabled in CEL. + * @exclusive_cmds: Commands that are kernel-internal only + * @dpa_res: Overall DPA resource tree for the device + * @pmem_res: Active Persistent memory capacity configuration + * @ram_res: Active Volatile memory capacity configuration + * @total_bytes: sum of all possible capacities + * @volatile_only_bytes: hard volatile capacity + * @persistent_only_bytes: hard persistent capacity + * @partition_align_bytes: alignment size for partition-able capacity + * @active_volatile_bytes: sum of hard + soft volatile + * @active_persistent_bytes: sum of hard + soft persistent + * @next_volatile_bytes: volatile capacity change pending device reset + * @next_persistent_bytes: persistent capacity change pending device reset + * @component_reg_phys: register base of component registers + * @info: Cached DVSEC information about the device. + * @serial: PCIe Device Serial Number + * @doe_mbs: PCI DOE mailbox array + * @mbox_send: @dev specific transport for transmitting mailbox commands + * + * See section 8.2.9.5.2 Capacity Configuration and Label Storage for + * details on capacity parameters. + */ +struct cxl_dev_state { + struct device *dev; + struct cxl_memdev *cxlmd; + + struct cxl_regs regs; + int cxl_dvsec; + + bool rcd; + size_t payload_size; + size_t lsa_size; + struct mutex mbox_mutex; /* Protects device mailbox and firmware */ + char firmware_version[0x10]; + DECLARE_BITMAP(enabled_cmds, CXL_MEM_COMMAND_ID_MAX); + DECLARE_BITMAP(exclusive_cmds, CXL_MEM_COMMAND_ID_MAX); + + struct resource dpa_res; + struct resource pmem_res; + struct resource ram_res; + u64 total_bytes; + u64 volatile_only_bytes; + u64 persistent_only_bytes; + u64 partition_align_bytes; + + u64 active_volatile_bytes; + u64 active_persistent_bytes; + u64 next_volatile_bytes; + u64 next_persistent_bytes; + + resource_size_t component_reg_phys; + u64 serial; + + struct xarray doe_mbs; + + int (*mbox_send)(struct cxl_dev_state *cxlds, struct cxl_mbox_cmd *cmd); +}; + +enum cxl_opcode { + CXL_MBOX_OP_INVALID = 0x0000, + CXL_MBOX_OP_RAW = CXL_MBOX_OP_INVALID, + CXL_MBOX_OP_GET_FW_INFO = 0x0200, + CXL_MBOX_OP_ACTIVATE_FW = 0x0202, + CXL_MBOX_OP_GET_SUPPORTED_LOGS = 0x0400, + CXL_MBOX_OP_GET_LOG = 0x0401, + CXL_MBOX_OP_IDENTIFY = 0x4000, + CXL_MBOX_OP_GET_PARTITION_INFO = 0x4100, + CXL_MBOX_OP_SET_PARTITION_INFO = 0x4101, + CXL_MBOX_OP_GET_LSA = 0x4102, + CXL_MBOX_OP_SET_LSA = 0x4103, + CXL_MBOX_OP_GET_HEALTH_INFO = 0x4200, + CXL_MBOX_OP_GET_ALERT_CONFIG = 0x4201, + CXL_MBOX_OP_SET_ALERT_CONFIG = 0x4202, + CXL_MBOX_OP_GET_SHUTDOWN_STATE = 0x4203, + CXL_MBOX_OP_SET_SHUTDOWN_STATE = 0x4204, + CXL_MBOX_OP_GET_POISON = 0x4300, + CXL_MBOX_OP_INJECT_POISON = 0x4301, + CXL_MBOX_OP_CLEAR_POISON = 0x4302, + CXL_MBOX_OP_GET_SCAN_MEDIA_CAPS = 0x4303, + CXL_MBOX_OP_SCAN_MEDIA = 0x4304, + CXL_MBOX_OP_GET_SCAN_MEDIA = 0x4305, + CXL_MBOX_OP_GET_SECURITY_STATE = 0x4500, + CXL_MBOX_OP_SET_PASSPHRASE = 0x4501, + CXL_MBOX_OP_DISABLE_PASSPHRASE = 0x4502, + CXL_MBOX_OP_UNLOCK = 0x4503, + CXL_MBOX_OP_FREEZE_SECURITY = 0x4504, + CXL_MBOX_OP_PASSPHRASE_SECURE_ERASE = 0x4505, + CXL_MBOX_OP_MAX = 0x10000 +}; + +#define DEFINE_CXL_CEL_UUID \ + UUID_INIT(0xda9c0b5, 0xbf41, 0x4b78, 0x8f, 0x79, 0x96, 0xb1, 0x62, \ + 0x3b, 0x3f, 0x17) + +#define DEFINE_CXL_VENDOR_DEBUG_UUID \ + UUID_INIT(0xe1819d9, 0x11a9, 0x400c, 0x81, 0x1f, 0xd6, 0x07, 0x19, \ + 0x40, 0x3d, 0x86) + +struct cxl_mbox_get_supported_logs { + __le16 entries; + u8 rsvd[6]; + struct cxl_gsl_entry { + uuid_t uuid; + __le32 size; + } __packed entry[]; +} __packed; + +struct cxl_cel_entry { + __le16 opcode; + __le16 effect; +} __packed; + +struct cxl_mbox_get_log { + uuid_t uuid; + __le32 offset; + __le32 length; +} __packed; + +/* See CXL 2.0 Table 175 Identify Memory Device Output Payload */ +struct cxl_mbox_identify { + char fw_revision[0x10]; + __le64 total_capacity; + __le64 volatile_capacity; + __le64 persistent_capacity; + __le64 partition_align; + __le16 info_event_log_size; + __le16 warning_event_log_size; + __le16 failure_event_log_size; + __le16 fatal_event_log_size; + __le32 lsa_size; + u8 poison_list_max_mer[3]; + __le16 inject_poison_limit; + u8 poison_caps; + u8 qos_telemetry_caps; +} __packed; + +struct cxl_mbox_get_partition_info { + __le64 active_volatile_cap; + __le64 active_persistent_cap; + __le64 next_volatile_cap; + __le64 next_persistent_cap; +} __packed; + +struct cxl_mbox_get_lsa { + __le32 offset; + __le32 length; +} __packed; + +struct cxl_mbox_set_lsa { + __le32 offset; + __le32 reserved; + u8 data[]; +} __packed; + +struct cxl_mbox_set_partition_info { + __le64 volatile_capacity; + u8 flags; +} __packed; + +#define CXL_SET_PARTITION_IMMEDIATE_FLAG BIT(0) + +/** + * struct cxl_mem_command - Driver representation of a memory device command + * @info: Command information as it exists for the UAPI + * @opcode: The actual bits used for the mailbox protocol + * @flags: Set of flags effecting driver behavior. + * + * * %CXL_CMD_FLAG_FORCE_ENABLE: In cases of error, commands with this flag + * will be enabled by the driver regardless of what hardware may have + * advertised. + * + * The cxl_mem_command is the driver's internal representation of commands that + * are supported by the driver. Some of these commands may not be supported by + * the hardware. The driver will use @info to validate the fields passed in by + * the user then submit the @opcode to the hardware. + * + * See struct cxl_command_info. + */ +struct cxl_mem_command { + struct cxl_command_info info; + enum cxl_opcode opcode; + u32 flags; +#define CXL_CMD_FLAG_NONE 0 +#define CXL_CMD_FLAG_FORCE_ENABLE BIT(0) +}; + +#define CXL_PMEM_SEC_STATE_USER_PASS_SET 0x01 +#define CXL_PMEM_SEC_STATE_MASTER_PASS_SET 0x02 +#define CXL_PMEM_SEC_STATE_LOCKED 0x04 +#define CXL_PMEM_SEC_STATE_FROZEN 0x08 +#define CXL_PMEM_SEC_STATE_USER_PLIMIT 0x10 +#define CXL_PMEM_SEC_STATE_MASTER_PLIMIT 0x20 + +/* set passphrase input payload */ +struct cxl_set_pass { + u8 type; + u8 reserved[31]; + /* CXL field using NVDIMM define, same length */ + u8 old_pass[NVDIMM_PASSPHRASE_LEN]; + u8 new_pass[NVDIMM_PASSPHRASE_LEN]; +} __packed; + +/* disable passphrase input payload */ +struct cxl_disable_pass { + u8 type; + u8 reserved[31]; + u8 pass[NVDIMM_PASSPHRASE_LEN]; +} __packed; + +/* passphrase secure erase payload */ +struct cxl_pass_erase { + u8 type; + u8 reserved[31]; + u8 pass[NVDIMM_PASSPHRASE_LEN]; +} __packed; + +enum { + CXL_PMEM_SEC_PASS_MASTER = 0, + CXL_PMEM_SEC_PASS_USER, +}; + +int cxl_internal_send_cmd(struct cxl_dev_state *cxlds, + struct cxl_mbox_cmd *cmd); +int cxl_dev_state_identify(struct cxl_dev_state *cxlds); +int cxl_await_media_ready(struct cxl_dev_state *cxlds); +int cxl_enumerate_cmds(struct cxl_dev_state *cxlds); +int cxl_mem_create_range_info(struct cxl_dev_state *cxlds); +struct cxl_dev_state *cxl_dev_state_create(struct device *dev); +void set_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds); +void clear_exclusive_cxl_commands(struct cxl_dev_state *cxlds, unsigned long *cmds); +#ifdef CONFIG_CXL_SUSPEND +void cxl_mem_active_inc(void); +void cxl_mem_active_dec(void); +#else +static inline void cxl_mem_active_inc(void) +{ +} +static inline void cxl_mem_active_dec(void) +{ +} +#endif + +struct cxl_hdm { + struct cxl_component_regs regs; + unsigned int decoder_count; + unsigned int target_count; + unsigned int interleave_mask; + struct cxl_port *port; +}; + +struct seq_file; +struct dentry *cxl_debugfs_create_dir(const char *dir); +void cxl_dpa_debug(struct seq_file *file, struct cxl_dev_state *cxlds); +#endif /* __CXL_MEM_H__ */ -- cgit v1.2.3