From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/devfreq/mtk-cci-devfreq.c | 444 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 444 insertions(+) create mode 100644 drivers/devfreq/mtk-cci-devfreq.c (limited to 'drivers/devfreq/mtk-cci-devfreq.c') diff --git a/drivers/devfreq/mtk-cci-devfreq.c b/drivers/devfreq/mtk-cci-devfreq.c new file mode 100644 index 000000000..e5458ada5 --- /dev/null +++ b/drivers/devfreq/mtk-cci-devfreq.c @@ -0,0 +1,444 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2022 MediaTek Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mtk_ccifreq_platform_data { + int min_volt_shift; + int max_volt_shift; + int proc_max_volt; + int sram_min_volt; + int sram_max_volt; +}; + +struct mtk_ccifreq_drv { + struct device *dev; + struct devfreq *devfreq; + struct regulator *proc_reg; + struct regulator *sram_reg; + struct clk *cci_clk; + struct clk *inter_clk; + int inter_voltage; + unsigned long pre_freq; + /* Avoid race condition for regulators between notify and policy */ + struct mutex reg_lock; + struct notifier_block opp_nb; + const struct mtk_ccifreq_platform_data *soc_data; + int vtrack_max; +}; + +static int mtk_ccifreq_set_voltage(struct mtk_ccifreq_drv *drv, int new_voltage) +{ + const struct mtk_ccifreq_platform_data *soc_data = drv->soc_data; + struct device *dev = drv->dev; + int pre_voltage, pre_vsram, new_vsram, vsram, voltage, ret; + int retry_max = drv->vtrack_max; + + if (!drv->sram_reg) { + ret = regulator_set_voltage(drv->proc_reg, new_voltage, + drv->soc_data->proc_max_volt); + return ret; + } + + pre_voltage = regulator_get_voltage(drv->proc_reg); + if (pre_voltage < 0) { + dev_err(dev, "invalid vproc value: %d\n", pre_voltage); + return pre_voltage; + } + + pre_vsram = regulator_get_voltage(drv->sram_reg); + if (pre_vsram < 0) { + dev_err(dev, "invalid vsram value: %d\n", pre_vsram); + return pre_vsram; + } + + new_vsram = clamp(new_voltage + soc_data->min_volt_shift, + soc_data->sram_min_volt, soc_data->sram_max_volt); + + do { + if (pre_voltage <= new_voltage) { + vsram = clamp(pre_voltage + soc_data->max_volt_shift, + soc_data->sram_min_volt, new_vsram); + ret = regulator_set_voltage(drv->sram_reg, vsram, + soc_data->sram_max_volt); + if (ret) + return ret; + + if (vsram == soc_data->sram_max_volt || + new_vsram == soc_data->sram_min_volt) + voltage = new_voltage; + else + voltage = vsram - soc_data->min_volt_shift; + + ret = regulator_set_voltage(drv->proc_reg, voltage, + soc_data->proc_max_volt); + if (ret) { + regulator_set_voltage(drv->sram_reg, pre_vsram, + soc_data->sram_max_volt); + return ret; + } + } else if (pre_voltage > new_voltage) { + voltage = max(new_voltage, + pre_vsram - soc_data->max_volt_shift); + ret = regulator_set_voltage(drv->proc_reg, voltage, + soc_data->proc_max_volt); + if (ret) + return ret; + + if (voltage == new_voltage) + vsram = new_vsram; + else + vsram = max(new_vsram, + voltage + soc_data->min_volt_shift); + + ret = regulator_set_voltage(drv->sram_reg, vsram, + soc_data->sram_max_volt); + if (ret) { + regulator_set_voltage(drv->proc_reg, pre_voltage, + soc_data->proc_max_volt); + return ret; + } + } + + pre_voltage = voltage; + pre_vsram = vsram; + + if (--retry_max < 0) { + dev_err(dev, + "over loop count, failed to set voltage\n"); + return -EINVAL; + } + } while (voltage != new_voltage || vsram != new_vsram); + + return 0; +} + +static int mtk_ccifreq_target(struct device *dev, unsigned long *freq, + u32 flags) +{ + struct mtk_ccifreq_drv *drv = dev_get_drvdata(dev); + struct clk *cci_pll = clk_get_parent(drv->cci_clk); + struct dev_pm_opp *opp; + unsigned long opp_rate; + int voltage, pre_voltage, inter_voltage, target_voltage, ret; + + if (!drv) + return -EINVAL; + + if (drv->pre_freq == *freq) + return 0; + + inter_voltage = drv->inter_voltage; + + opp_rate = *freq; + opp = devfreq_recommended_opp(dev, &opp_rate, 1); + if (IS_ERR(opp)) { + dev_err(dev, "failed to find opp for freq: %ld\n", opp_rate); + return PTR_ERR(opp); + } + + mutex_lock(&drv->reg_lock); + + voltage = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + pre_voltage = regulator_get_voltage(drv->proc_reg); + if (pre_voltage < 0) { + dev_err(dev, "invalid vproc value: %d\n", pre_voltage); + ret = pre_voltage; + goto out_unlock; + } + + /* scale up: set voltage first then freq. */ + target_voltage = max(inter_voltage, voltage); + if (pre_voltage <= target_voltage) { + ret = mtk_ccifreq_set_voltage(drv, target_voltage); + if (ret) { + dev_err(dev, "failed to scale up voltage\n"); + goto out_restore_voltage; + } + } + + /* switch the cci clock to intermediate clock source. */ + ret = clk_set_parent(drv->cci_clk, drv->inter_clk); + if (ret) { + dev_err(dev, "failed to re-parent cci clock\n"); + goto out_restore_voltage; + } + + /* set the original clock to target rate. */ + ret = clk_set_rate(cci_pll, *freq); + if (ret) { + dev_err(dev, "failed to set cci pll rate: %d\n", ret); + clk_set_parent(drv->cci_clk, cci_pll); + goto out_restore_voltage; + } + + /* switch the cci clock back to the original clock source. */ + ret = clk_set_parent(drv->cci_clk, cci_pll); + if (ret) { + dev_err(dev, "failed to re-parent cci clock\n"); + mtk_ccifreq_set_voltage(drv, inter_voltage); + goto out_unlock; + } + + /* + * If the new voltage is lower than the intermediate voltage or the + * original voltage, scale down to the new voltage. + */ + if (voltage < inter_voltage || voltage < pre_voltage) { + ret = mtk_ccifreq_set_voltage(drv, voltage); + if (ret) { + dev_err(dev, "failed to scale down voltage\n"); + goto out_unlock; + } + } + + drv->pre_freq = *freq; + mutex_unlock(&drv->reg_lock); + + return 0; + +out_restore_voltage: + mtk_ccifreq_set_voltage(drv, pre_voltage); + +out_unlock: + mutex_unlock(&drv->reg_lock); + return ret; +} + +static int mtk_ccifreq_opp_notifier(struct notifier_block *nb, + unsigned long event, void *data) +{ + struct dev_pm_opp *opp = data; + struct mtk_ccifreq_drv *drv; + unsigned long freq, volt; + + drv = container_of(nb, struct mtk_ccifreq_drv, opp_nb); + + if (event == OPP_EVENT_ADJUST_VOLTAGE) { + freq = dev_pm_opp_get_freq(opp); + + mutex_lock(&drv->reg_lock); + /* current opp item is changed */ + if (freq == drv->pre_freq) { + volt = dev_pm_opp_get_voltage(opp); + mtk_ccifreq_set_voltage(drv, volt); + } + mutex_unlock(&drv->reg_lock); + } + + return 0; +} + +static struct devfreq_dev_profile mtk_ccifreq_profile = { + .target = mtk_ccifreq_target, +}; + +static int mtk_ccifreq_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_ccifreq_drv *drv; + struct devfreq_passive_data *passive_data; + struct dev_pm_opp *opp; + unsigned long rate, opp_volt; + int ret; + + drv = devm_kzalloc(dev, sizeof(*drv), GFP_KERNEL); + if (!drv) + return -ENOMEM; + + drv->dev = dev; + drv->soc_data = (const struct mtk_ccifreq_platform_data *) + of_device_get_match_data(&pdev->dev); + mutex_init(&drv->reg_lock); + platform_set_drvdata(pdev, drv); + + drv->cci_clk = devm_clk_get(dev, "cci"); + if (IS_ERR(drv->cci_clk)) { + ret = PTR_ERR(drv->cci_clk); + return dev_err_probe(dev, ret, "failed to get cci clk\n"); + } + + drv->inter_clk = devm_clk_get(dev, "intermediate"); + if (IS_ERR(drv->inter_clk)) { + ret = PTR_ERR(drv->inter_clk); + return dev_err_probe(dev, ret, + "failed to get intermediate clk\n"); + } + + drv->proc_reg = devm_regulator_get_optional(dev, "proc"); + if (IS_ERR(drv->proc_reg)) { + ret = PTR_ERR(drv->proc_reg); + return dev_err_probe(dev, ret, + "failed to get proc regulator\n"); + } + + ret = regulator_enable(drv->proc_reg); + if (ret) { + dev_err(dev, "failed to enable proc regulator\n"); + return ret; + } + + drv->sram_reg = devm_regulator_get_optional(dev, "sram"); + if (IS_ERR(drv->sram_reg)) { + ret = PTR_ERR(drv->sram_reg); + if (ret == -EPROBE_DEFER) + goto out_free_resources; + + drv->sram_reg = NULL; + } else { + ret = regulator_enable(drv->sram_reg); + if (ret) { + dev_err(dev, "failed to enable sram regulator\n"); + goto out_free_resources; + } + } + + /* + * We assume min voltage is 0 and tracking target voltage using + * min_volt_shift for each iteration. + * The retry_max is 3 times of expected iteration count. + */ + drv->vtrack_max = 3 * DIV_ROUND_UP(max(drv->soc_data->sram_max_volt, + drv->soc_data->proc_max_volt), + drv->soc_data->min_volt_shift); + + ret = clk_prepare_enable(drv->cci_clk); + if (ret) + goto out_free_resources; + + ret = dev_pm_opp_of_add_table(dev); + if (ret) { + dev_err(dev, "failed to add opp table: %d\n", ret); + goto out_disable_cci_clk; + } + + rate = clk_get_rate(drv->inter_clk); + opp = dev_pm_opp_find_freq_ceil(dev, &rate); + if (IS_ERR(opp)) { + ret = PTR_ERR(opp); + dev_err(dev, "failed to get intermediate opp: %d\n", ret); + goto out_remove_opp_table; + } + drv->inter_voltage = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + + rate = U32_MAX; + opp = dev_pm_opp_find_freq_floor(drv->dev, &rate); + if (IS_ERR(opp)) { + dev_err(dev, "failed to get opp\n"); + ret = PTR_ERR(opp); + goto out_remove_opp_table; + } + + opp_volt = dev_pm_opp_get_voltage(opp); + dev_pm_opp_put(opp); + ret = mtk_ccifreq_set_voltage(drv, opp_volt); + if (ret) { + dev_err(dev, "failed to scale to highest voltage %lu in proc_reg\n", + opp_volt); + goto out_remove_opp_table; + } + + passive_data = devm_kzalloc(dev, sizeof(*passive_data), GFP_KERNEL); + if (!passive_data) { + ret = -ENOMEM; + goto out_remove_opp_table; + } + + passive_data->parent_type = CPUFREQ_PARENT_DEV; + drv->devfreq = devm_devfreq_add_device(dev, &mtk_ccifreq_profile, + DEVFREQ_GOV_PASSIVE, + passive_data); + if (IS_ERR(drv->devfreq)) { + ret = -EPROBE_DEFER; + dev_err(dev, "failed to add devfreq device: %ld\n", + PTR_ERR(drv->devfreq)); + goto out_remove_opp_table; + } + + drv->opp_nb.notifier_call = mtk_ccifreq_opp_notifier; + ret = dev_pm_opp_register_notifier(dev, &drv->opp_nb); + if (ret) { + dev_err(dev, "failed to register opp notifier: %d\n", ret); + goto out_remove_opp_table; + } + return 0; + +out_remove_opp_table: + dev_pm_opp_of_remove_table(dev); + +out_disable_cci_clk: + clk_disable_unprepare(drv->cci_clk); + +out_free_resources: + if (regulator_is_enabled(drv->proc_reg)) + regulator_disable(drv->proc_reg); + if (drv->sram_reg && regulator_is_enabled(drv->sram_reg)) + regulator_disable(drv->sram_reg); + + return ret; +} + +static int mtk_ccifreq_remove(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct mtk_ccifreq_drv *drv; + + drv = platform_get_drvdata(pdev); + + dev_pm_opp_unregister_notifier(dev, &drv->opp_nb); + dev_pm_opp_of_remove_table(dev); + clk_disable_unprepare(drv->cci_clk); + regulator_disable(drv->proc_reg); + if (drv->sram_reg) + regulator_disable(drv->sram_reg); + + return 0; +} + +static const struct mtk_ccifreq_platform_data mt8183_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 200000, + .proc_max_volt = 1150000, +}; + +static const struct mtk_ccifreq_platform_data mt8186_platform_data = { + .min_volt_shift = 100000, + .max_volt_shift = 250000, + .proc_max_volt = 1118750, + .sram_min_volt = 850000, + .sram_max_volt = 1118750, +}; + +static const struct of_device_id mtk_ccifreq_machines[] = { + { .compatible = "mediatek,mt8183-cci", .data = &mt8183_platform_data }, + { .compatible = "mediatek,mt8186-cci", .data = &mt8186_platform_data }, + { }, +}; +MODULE_DEVICE_TABLE(of, mtk_ccifreq_machines); + +static struct platform_driver mtk_ccifreq_platdrv = { + .probe = mtk_ccifreq_probe, + .remove = mtk_ccifreq_remove, + .driver = { + .name = "mtk-ccifreq", + .of_match_table = mtk_ccifreq_machines, + }, +}; +module_platform_driver(mtk_ccifreq_platdrv); + +MODULE_DESCRIPTION("MediaTek CCI devfreq driver"); +MODULE_AUTHOR("Jia-Wei Chang "); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3