From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/dma/ppc4xx/dma.h | 220 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 220 insertions(+) create mode 100644 drivers/dma/ppc4xx/dma.h (limited to 'drivers/dma/ppc4xx/dma.h') diff --git a/drivers/dma/ppc4xx/dma.h b/drivers/dma/ppc4xx/dma.h new file mode 100644 index 000000000..1ff4be23d --- /dev/null +++ b/drivers/dma/ppc4xx/dma.h @@ -0,0 +1,220 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * 440SPe's DMA engines support header file + * + * 2006-2009 (C) DENX Software Engineering. + * + * Author: Yuri Tikhonov + */ + +#ifndef _PPC440SPE_DMA_H +#define _PPC440SPE_DMA_H + +#include + +/* Number of elements in the array with statical CDBs */ +#define MAX_STAT_DMA_CDBS 16 +/* Number of DMA engines available on the contoller */ +#define DMA_ENGINES_NUM 2 + +/* Maximum h/w supported number of destinations */ +#define DMA_DEST_MAX_NUM 2 + +/* FIFO's params */ +#define DMA0_FIFO_SIZE 0x1000 +#define DMA1_FIFO_SIZE 0x1000 +#define DMA_FIFO_ENABLE (1<<12) + +/* DMA Configuration Register. Data Transfer Engine PLB Priority: */ +#define DMA_CFG_DXEPR_LP (0<<26) +#define DMA_CFG_DXEPR_HP (3<<26) +#define DMA_CFG_DXEPR_HHP (2<<26) +#define DMA_CFG_DXEPR_HHHP (1<<26) + +/* DMA Configuration Register. DMA FIFO Manager PLB Priority: */ +#define DMA_CFG_DFMPP_LP (0<<23) +#define DMA_CFG_DFMPP_HP (3<<23) +#define DMA_CFG_DFMPP_HHP (2<<23) +#define DMA_CFG_DFMPP_HHHP (1<<23) + +/* DMA Configuration Register. Force 64-byte Alignment */ +#define DMA_CFG_FALGN (1 << 19) + +/*UIC0:*/ +#define D0CPF_INT (1<<12) +#define D0CSF_INT (1<<11) +#define D1CPF_INT (1<<10) +#define D1CSF_INT (1<<9) +/*UIC1:*/ +#define DMAE_INT (1<<9) + +/* I2O IOP Interrupt Mask Register */ +#define I2O_IOPIM_P0SNE (1<<3) +#define I2O_IOPIM_P0EM (1<<5) +#define I2O_IOPIM_P1SNE (1<<6) +#define I2O_IOPIM_P1EM (1<<8) + +/* DMA CDB fields */ +#define DMA_CDB_MSK (0xF) +#define DMA_CDB_64B_ADDR (1<<2) +#define DMA_CDB_NO_INT (1<<3) +#define DMA_CDB_STATUS_MSK (0x3) +#define DMA_CDB_ADDR_MSK (0xFFFFFFF0) + +/* DMA CDB OpCodes */ +#define DMA_CDB_OPC_NO_OP (0x00) +#define DMA_CDB_OPC_MV_SG1_SG2 (0x01) +#define DMA_CDB_OPC_MULTICAST (0x05) +#define DMA_CDB_OPC_DFILL128 (0x24) +#define DMA_CDB_OPC_DCHECK128 (0x23) + +#define DMA_CUED_XOR_BASE (0x10000000) +#define DMA_CUED_XOR_HB (0x00000008) + +#ifdef CONFIG_440SP +#define DMA_CUED_MULT1_OFF 0 +#define DMA_CUED_MULT2_OFF 8 +#define DMA_CUED_MULT3_OFF 16 +#define DMA_CUED_REGION_OFF 24 +#define DMA_CUED_XOR_WIN_MSK (0xFC000000) +#else +#define DMA_CUED_MULT1_OFF 2 +#define DMA_CUED_MULT2_OFF 10 +#define DMA_CUED_MULT3_OFF 18 +#define DMA_CUED_REGION_OFF 26 +#define DMA_CUED_XOR_WIN_MSK (0xF0000000) +#endif + +#define DMA_CUED_REGION_MSK 0x3 +#define DMA_RXOR123 0x0 +#define DMA_RXOR124 0x1 +#define DMA_RXOR125 0x2 +#define DMA_RXOR12 0x3 + +/* S/G addresses */ +#define DMA_CDB_SG_SRC 1 +#define DMA_CDB_SG_DST1 2 +#define DMA_CDB_SG_DST2 3 + +/* + * DMAx engines Command Descriptor Block Type + */ +struct dma_cdb { + /* + * Basic CDB structure (Table 20-17, p.499, 440spe_um_1_22.pdf) + */ + u8 pad0[2]; /* reserved */ + u8 attr; /* attributes */ + u8 opc; /* opcode */ + u32 sg1u; /* upper SG1 address */ + u32 sg1l; /* lower SG1 address */ + u32 cnt; /* SG count, 3B used */ + u32 sg2u; /* upper SG2 address */ + u32 sg2l; /* lower SG2 address */ + u32 sg3u; /* upper SG3 address */ + u32 sg3l; /* lower SG3 address */ +}; + +/* + * DMAx hardware registers (p.515 in 440SPe UM 1.22) + */ +struct dma_regs { + u32 cpfpl; + u32 cpfph; + u32 csfpl; + u32 csfph; + u32 dsts; + u32 cfg; + u8 pad0[0x8]; + u16 cpfhp; + u16 cpftp; + u16 csfhp; + u16 csftp; + u8 pad1[0x8]; + u32 acpl; + u32 acph; + u32 s1bpl; + u32 s1bph; + u32 s2bpl; + u32 s2bph; + u32 s3bpl; + u32 s3bph; + u8 pad2[0x10]; + u32 earl; + u32 earh; + u8 pad3[0x8]; + u32 seat; + u32 sead; + u32 op; + u32 fsiz; +}; + +/* + * I2O hardware registers (p.528 in 440SPe UM 1.22) + */ +struct i2o_regs { + u32 ists; + u32 iseat; + u32 isead; + u8 pad0[0x14]; + u32 idbel; + u8 pad1[0xc]; + u32 ihis; + u32 ihim; + u8 pad2[0x8]; + u32 ihiq; + u32 ihoq; + u8 pad3[0x8]; + u32 iopis; + u32 iopim; + u32 iopiq; + u8 iopoq; + u8 pad4[3]; + u16 iiflh; + u16 iiflt; + u16 iiplh; + u16 iiplt; + u16 ioflh; + u16 ioflt; + u16 ioplh; + u16 ioplt; + u32 iidc; + u32 ictl; + u32 ifcpp; + u8 pad5[0x4]; + u16 mfac0; + u16 mfac1; + u16 mfac2; + u16 mfac3; + u16 mfac4; + u16 mfac5; + u16 mfac6; + u16 mfac7; + u16 ifcfh; + u16 ifcht; + u8 pad6[0x4]; + u32 iifmc; + u32 iodb; + u32 iodbc; + u32 ifbal; + u32 ifbah; + u32 ifsiz; + u32 ispd0; + u32 ispd1; + u32 ispd2; + u32 ispd3; + u32 ihipl; + u32 ihiph; + u32 ihopl; + u32 ihoph; + u32 iiipl; + u32 iiiph; + u32 iiopl; + u32 iioph; + u32 ifcpl; + u32 ifcph; + u8 pad7[0x8]; + u32 iopt; +}; + +#endif /* _PPC440SPE_DMA_H */ -- cgit v1.2.3