From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/edac/amd8111_edac.c | 597 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 597 insertions(+) create mode 100644 drivers/edac/amd8111_edac.c (limited to 'drivers/edac/amd8111_edac.c') diff --git a/drivers/edac/amd8111_edac.c b/drivers/edac/amd8111_edac.c new file mode 100644 index 000000000..7508aa416 --- /dev/null +++ b/drivers/edac/amd8111_edac.c @@ -0,0 +1,597 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * amd8111_edac.c, AMD8111 Hyper Transport chip EDAC kernel module + * + * Copyright (c) 2008 Wind River Systems, Inc. + * + * Authors: Cao Qingtao + * Benjamin Walsh + * Hu Yongqi + */ + +#include +#include +#include +#include +#include +#include +#include + +#include "edac_module.h" +#include "amd8111_edac.h" + +#define AMD8111_EDAC_REVISION " Ver: 1.0.0" +#define AMD8111_EDAC_MOD_STR "amd8111_edac" + +#define PCI_DEVICE_ID_AMD_8111_PCI 0x7460 + +enum amd8111_edac_devs { + LPC_BRIDGE = 0, +}; + +enum amd8111_edac_pcis { + PCI_BRIDGE = 0, +}; + +/* Wrapper functions for accessing PCI configuration space */ +static int edac_pci_read_dword(struct pci_dev *dev, int reg, u32 *val32) +{ + int ret; + + ret = pci_read_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); + + return ret; +} + +static void edac_pci_read_byte(struct pci_dev *dev, int reg, u8 *val8) +{ + int ret; + + ret = pci_read_config_byte(dev, reg, val8); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Read Error at 0x%x\n", reg); +} + +static void edac_pci_write_dword(struct pci_dev *dev, int reg, u32 val32) +{ + int ret; + + ret = pci_write_config_dword(dev, reg, val32); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +static void edac_pci_write_byte(struct pci_dev *dev, int reg, u8 val8) +{ + int ret; + + ret = pci_write_config_byte(dev, reg, val8); + if (ret != 0) + printk(KERN_ERR AMD8111_EDAC_MOD_STR + " PCI Access Write Error at 0x%x\n", reg); +} + +/* + * device-specific methods for amd8111 PCI Bridge Controller + * + * Error Reporting and Handling for amd8111 chipset could be found + * in its datasheet 3.1.2 section, P37 + */ +static void amd8111_pci_bridge_init(struct amd8111_pci_info *pci_info) +{ + u32 val32; + struct pci_dev *dev = pci_info->dev; + + /* First clear error detection flags on the host interface */ + + /* Clear SSE/SMA/STA flags in the global status register*/ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + if (val32 & PCI_STSCMD_CLEAR_MASK) + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Clear CRC and Link Fail flags in HT Link Control reg */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + if (val32 & HT_LINK_CLEAR_MASK) + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Second clear all fault on the secondary interface */ + + /* Clear error flags in the memory-base limit reg. */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_CLEAR_MASK) + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + /* Clear Discard Timer Expired flag in Interrupt/Bridge Control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + if (val32 & PCI_INTBRG_CTRL_CLEAR_MASK) + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + + /* Last enable error detections */ + if (edac_op_state == EDAC_OPSTATE_POLL) { + /* Enable System Error reporting in global status register */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + val32 |= PCI_STSCMD_SERREN; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Enable CRC Sync flood packets to HyperTransport Link */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + val32 |= HT_LINK_CRCFEN; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Enable SSE reporting etc in Interrupt control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + val32 |= PCI_INTBRG_CTRL_POLL_MASK; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + } +} + +static void amd8111_pci_bridge_exit(struct amd8111_pci_info *pci_info) +{ + u32 val32; + struct pci_dev *dev = pci_info->dev; + + if (edac_op_state == EDAC_OPSTATE_POLL) { + /* Disable System Error reporting */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + val32 &= ~PCI_STSCMD_SERREN; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + /* Disable CRC flood packets */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + val32 &= ~HT_LINK_CRCFEN; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + /* Disable DTSERREN/MARSP/SERREN in Interrupt Control reg */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + val32 &= ~PCI_INTBRG_CTRL_POLL_MASK; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + } +} + +static void amd8111_pci_bridge_check(struct edac_pci_ctl_info *edac_dev) +{ + struct amd8111_pci_info *pci_info = edac_dev->pvt_info; + struct pci_dev *dev = pci_info->dev; + u32 val32; + + /* Check out PCI Bridge Status and Command Register */ + edac_pci_read_dword(dev, REG_PCI_STSCMD, &val32); + if (val32 & PCI_STSCMD_CLEAR_MASK) { + printk(KERN_INFO "Error(s) in PCI bridge status and command" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "SSE: %d, RMA: %d, RTA: %d\n", + (val32 & PCI_STSCMD_SSE) != 0, + (val32 & PCI_STSCMD_RMA) != 0, + (val32 & PCI_STSCMD_RTA) != 0); + + val32 |= PCI_STSCMD_CLEAR_MASK; + edac_pci_write_dword(dev, REG_PCI_STSCMD, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out HyperTransport Link Control Register */ + edac_pci_read_dword(dev, REG_HT_LINK, &val32); + if (val32 & HT_LINK_LKFAIL) { + printk(KERN_INFO "Error(s) in hypertransport link control" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "LKFAIL: %d\n", + (val32 & HT_LINK_LKFAIL) != 0); + + val32 |= HT_LINK_LKFAIL; + edac_pci_write_dword(dev, REG_HT_LINK, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out PCI Interrupt and Bridge Control Register */ + edac_pci_read_dword(dev, REG_PCI_INTBRG_CTRL, &val32); + if (val32 & PCI_INTBRG_CTRL_DTSTAT) { + printk(KERN_INFO "Error(s) in PCI interrupt and bridge control" + "register on device %s\n", pci_info->ctl_name); + printk(KERN_INFO "DTSTAT: %d\n", + (val32 & PCI_INTBRG_CTRL_DTSTAT) != 0); + + val32 |= PCI_INTBRG_CTRL_DTSTAT; + edac_pci_write_dword(dev, REG_PCI_INTBRG_CTRL, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } + + /* Check out PCI Bridge Memory Base-Limit Register */ + edac_pci_read_dword(dev, REG_MEM_LIM, &val32); + if (val32 & MEM_LIMIT_CLEAR_MASK) { + printk(KERN_INFO + "Error(s) in mem limit register on %s device\n", + pci_info->ctl_name); + printk(KERN_INFO "DPE: %d, RSE: %d, RMA: %d\n" + "RTA: %d, STA: %d, MDPE: %d\n", + (val32 & MEM_LIMIT_DPE) != 0, + (val32 & MEM_LIMIT_RSE) != 0, + (val32 & MEM_LIMIT_RMA) != 0, + (val32 & MEM_LIMIT_RTA) != 0, + (val32 & MEM_LIMIT_STA) != 0, + (val32 & MEM_LIMIT_MDPE) != 0); + + val32 |= MEM_LIMIT_CLEAR_MASK; + edac_pci_write_dword(dev, REG_MEM_LIM, val32); + + edac_pci_handle_npe(edac_dev, edac_dev->ctl_name); + } +} + +static struct resource *legacy_io_res; +static int at_compat_reg_broken; +#define LEGACY_NR_PORTS 1 + +/* device-specific methods for amd8111 LPC Bridge device */ +static void amd8111_lpc_bridge_init(struct amd8111_dev_info *dev_info) +{ + u8 val8; + struct pci_dev *dev = dev_info->dev; + + /* First clear REG_AT_COMPAT[SERR, IOCHK] if necessary */ + legacy_io_res = request_region(REG_AT_COMPAT, LEGACY_NR_PORTS, + AMD8111_EDAC_MOD_STR); + if (!legacy_io_res) + printk(KERN_INFO "%s: failed to request legacy I/O region " + "start %d, len %d\n", __func__, + REG_AT_COMPAT, LEGACY_NR_PORTS); + else { + val8 = __do_inb(REG_AT_COMPAT); + if (val8 == 0xff) { /* buggy port */ + printk(KERN_INFO "%s: port %d is buggy, not supported" + " by hardware?\n", __func__, REG_AT_COMPAT); + at_compat_reg_broken = 1; + release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); + legacy_io_res = NULL; + } else { + u8 out8 = 0; + if (val8 & AT_COMPAT_SERR) + out8 = AT_COMPAT_CLRSERR; + if (val8 & AT_COMPAT_IOCHK) + out8 |= AT_COMPAT_CLRIOCHK; + if (out8 > 0) + __do_outb(out8, REG_AT_COMPAT); + } + } + + /* Second clear error flags on LPC bridge */ + edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); + if (val8 & IO_CTRL_1_CLEAR_MASK) + edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); +} + +static void amd8111_lpc_bridge_exit(struct amd8111_dev_info *dev_info) +{ + if (legacy_io_res) + release_region(REG_AT_COMPAT, LEGACY_NR_PORTS); +} + +static void amd8111_lpc_bridge_check(struct edac_device_ctl_info *edac_dev) +{ + struct amd8111_dev_info *dev_info = edac_dev->pvt_info; + struct pci_dev *dev = dev_info->dev; + u8 val8; + + edac_pci_read_byte(dev, REG_IO_CTRL_1, &val8); + if (val8 & IO_CTRL_1_CLEAR_MASK) { + printk(KERN_INFO + "Error(s) in IO control register on %s device\n", + dev_info->ctl_name); + printk(KERN_INFO "LPC ERR: %d, PW2LPC: %d\n", + (val8 & IO_CTRL_1_LPC_ERR) != 0, + (val8 & IO_CTRL_1_PW2LPC) != 0); + + val8 |= IO_CTRL_1_CLEAR_MASK; + edac_pci_write_byte(dev, REG_IO_CTRL_1, val8); + + edac_device_handle_ue(edac_dev, 0, 0, edac_dev->ctl_name); + } + + if (at_compat_reg_broken == 0) { + u8 out8 = 0; + val8 = __do_inb(REG_AT_COMPAT); + if (val8 & AT_COMPAT_SERR) + out8 = AT_COMPAT_CLRSERR; + if (val8 & AT_COMPAT_IOCHK) + out8 |= AT_COMPAT_CLRIOCHK; + if (out8 > 0) { + __do_outb(out8, REG_AT_COMPAT); + edac_device_handle_ue(edac_dev, 0, 0, + edac_dev->ctl_name); + } + } +} + +/* General devices represented by edac_device_ctl_info */ +static struct amd8111_dev_info amd8111_devices[] = { + [LPC_BRIDGE] = { + .err_dev = PCI_DEVICE_ID_AMD_8111_LPC, + .ctl_name = "lpc", + .init = amd8111_lpc_bridge_init, + .exit = amd8111_lpc_bridge_exit, + .check = amd8111_lpc_bridge_check, + }, + {0}, +}; + +/* PCI controllers represented by edac_pci_ctl_info */ +static struct amd8111_pci_info amd8111_pcis[] = { + [PCI_BRIDGE] = { + .err_dev = PCI_DEVICE_ID_AMD_8111_PCI, + .ctl_name = "AMD8111_PCI_Controller", + .init = amd8111_pci_bridge_init, + .exit = amd8111_pci_bridge_exit, + .check = amd8111_pci_bridge_check, + }, + {0}, +}; + +static int amd8111_dev_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct amd8111_dev_info *dev_info = &amd8111_devices[id->driver_data]; + int ret = -ENODEV; + + dev_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, + dev_info->err_dev, NULL); + + if (!dev_info->dev) { + printk(KERN_ERR "EDAC device not found:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + goto err; + } + + if (pci_enable_device(dev_info->dev)) { + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + goto err_dev_put; + } + + /* + * we do not allocate extra private structure for + * edac_device_ctl_info, but make use of existing + * one instead. + */ + dev_info->edac_idx = edac_device_alloc_index(); + dev_info->edac_dev = + edac_device_alloc_ctl_info(0, dev_info->ctl_name, 1, + NULL, 0, 0, + NULL, 0, dev_info->edac_idx); + if (!dev_info->edac_dev) { + ret = -ENOMEM; + goto err_dev_put; + } + + dev_info->edac_dev->pvt_info = dev_info; + dev_info->edac_dev->dev = &dev_info->dev->dev; + dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; + dev_info->edac_dev->ctl_name = dev_info->ctl_name; + dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + dev_info->edac_dev->edac_check = dev_info->check; + + if (dev_info->init) + dev_info->init(dev_info); + + if (edac_device_add_device(dev_info->edac_dev) > 0) { + printk(KERN_ERR "failed to add edac_dev for %s\n", + dev_info->ctl_name); + goto err_edac_free_ctl; + } + + printk(KERN_INFO "added one edac_dev on AMD8111 " + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, dev_info->err_dev, + dev_info->ctl_name); + + return 0; + +err_edac_free_ctl: + edac_device_free_ctl_info(dev_info->edac_dev); +err_dev_put: + pci_dev_put(dev_info->dev); +err: + return ret; +} + +static void amd8111_dev_remove(struct pci_dev *dev) +{ + struct amd8111_dev_info *dev_info; + + for (dev_info = amd8111_devices; dev_info->err_dev; dev_info++) + if (dev_info->dev->device == dev->device) + break; + + if (!dev_info->err_dev) /* should never happen */ + return; + + if (dev_info->edac_dev) { + edac_device_del_device(dev_info->edac_dev->dev); + edac_device_free_ctl_info(dev_info->edac_dev); + } + + if (dev_info->exit) + dev_info->exit(dev_info); + + pci_dev_put(dev_info->dev); +} + +static int amd8111_pci_probe(struct pci_dev *dev, + const struct pci_device_id *id) +{ + struct amd8111_pci_info *pci_info = &amd8111_pcis[id->driver_data]; + int ret = -ENODEV; + + pci_info->dev = pci_get_device(PCI_VENDOR_ID_AMD, + pci_info->err_dev, NULL); + + if (!pci_info->dev) { + printk(KERN_ERR "EDAC device not found:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + goto err; + } + + if (pci_enable_device(pci_info->dev)) { + printk(KERN_ERR "failed to enable:" + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + goto err_dev_put; + } + + /* + * we do not allocate extra private structure for + * edac_pci_ctl_info, but make use of existing + * one instead. + */ + pci_info->edac_idx = edac_pci_alloc_index(); + pci_info->edac_dev = edac_pci_alloc_ctl_info(0, pci_info->ctl_name); + if (!pci_info->edac_dev) { + ret = -ENOMEM; + goto err_dev_put; + } + + pci_info->edac_dev->pvt_info = pci_info; + pci_info->edac_dev->dev = &pci_info->dev->dev; + pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR; + pci_info->edac_dev->ctl_name = pci_info->ctl_name; + pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev); + + if (edac_op_state == EDAC_OPSTATE_POLL) + pci_info->edac_dev->edac_check = pci_info->check; + + if (pci_info->init) + pci_info->init(pci_info); + + if (edac_pci_add_device(pci_info->edac_dev, pci_info->edac_idx) > 0) { + printk(KERN_ERR "failed to add edac_pci for %s\n", + pci_info->ctl_name); + goto err_edac_free_ctl; + } + + printk(KERN_INFO "added one edac_pci on AMD8111 " + "vendor %x, device %x, name %s\n", + PCI_VENDOR_ID_AMD, pci_info->err_dev, + pci_info->ctl_name); + + return 0; + +err_edac_free_ctl: + edac_pci_free_ctl_info(pci_info->edac_dev); +err_dev_put: + pci_dev_put(pci_info->dev); +err: + return ret; +} + +static void amd8111_pci_remove(struct pci_dev *dev) +{ + struct amd8111_pci_info *pci_info; + + for (pci_info = amd8111_pcis; pci_info->err_dev; pci_info++) + if (pci_info->dev->device == dev->device) + break; + + if (!pci_info->err_dev) /* should never happen */ + return; + + if (pci_info->edac_dev) { + edac_pci_del_device(pci_info->edac_dev->dev); + edac_pci_free_ctl_info(pci_info->edac_dev); + } + + if (pci_info->exit) + pci_info->exit(pci_info); + + pci_dev_put(pci_info->dev); +} + +/* PCI Device ID talbe for general EDAC device */ +static const struct pci_device_id amd8111_edac_dev_tbl[] = { + { + PCI_VEND_DEV(AMD, 8111_LPC), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = LPC_BRIDGE, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8111_edac_dev_tbl); + +static struct pci_driver amd8111_edac_dev_driver = { + .name = "AMD8111_EDAC_DEV", + .probe = amd8111_dev_probe, + .remove = amd8111_dev_remove, + .id_table = amd8111_edac_dev_tbl, +}; + +/* PCI Device ID table for EDAC PCI controller */ +static const struct pci_device_id amd8111_edac_pci_tbl[] = { + { + PCI_VEND_DEV(AMD, 8111_PCI), + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = 0, + .class_mask = 0, + .driver_data = PCI_BRIDGE, + }, + { + 0, + } /* table is NULL-terminated */ +}; +MODULE_DEVICE_TABLE(pci, amd8111_edac_pci_tbl); + +static struct pci_driver amd8111_edac_pci_driver = { + .name = "AMD8111_EDAC_PCI", + .probe = amd8111_pci_probe, + .remove = amd8111_pci_remove, + .id_table = amd8111_edac_pci_tbl, +}; + +static int __init amd8111_edac_init(void) +{ + int val; + + printk(KERN_INFO "AMD8111 EDAC driver " AMD8111_EDAC_REVISION "\n"); + printk(KERN_INFO "\t(c) 2008 Wind River Systems, Inc.\n"); + + /* Only POLL mode supported so far */ + edac_op_state = EDAC_OPSTATE_POLL; + + val = pci_register_driver(&amd8111_edac_dev_driver); + val |= pci_register_driver(&amd8111_edac_pci_driver); + + return val; +} + +static void __exit amd8111_edac_exit(void) +{ + pci_unregister_driver(&amd8111_edac_pci_driver); + pci_unregister_driver(&amd8111_edac_dev_driver); +} + + +module_init(amd8111_edac_init); +module_exit(amd8111_edac_exit); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Cao Qingtao \n"); +MODULE_DESCRIPTION("AMD8111 HyperTransport I/O Hub EDAC kernel module"); -- cgit v1.2.3