From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/extcon/extcon-fsa9480.c | 390 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 390 insertions(+) create mode 100644 drivers/extcon/extcon-fsa9480.c (limited to 'drivers/extcon/extcon-fsa9480.c') diff --git a/drivers/extcon/extcon-fsa9480.c b/drivers/extcon/extcon-fsa9480.c new file mode 100644 index 000000000..e8b2671eb --- /dev/null +++ b/drivers/extcon/extcon-fsa9480.c @@ -0,0 +1,390 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * extcon-fsa9480.c - Fairchild Semiconductor FSA9480 extcon driver + * + * Copyright (c) 2019 Tomasz Figa + * + * Loosely based on old fsa9480 misc-device driver. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* FSA9480 I2C registers */ +#define FSA9480_REG_DEVID 0x01 +#define FSA9480_REG_CTRL 0x02 +#define FSA9480_REG_INT1 0x03 +#define FSA9480_REG_INT2 0x04 +#define FSA9480_REG_INT1_MASK 0x05 +#define FSA9480_REG_INT2_MASK 0x06 +#define FSA9480_REG_ADC 0x07 +#define FSA9480_REG_TIMING1 0x08 +#define FSA9480_REG_TIMING2 0x09 +#define FSA9480_REG_DEV_T1 0x0a +#define FSA9480_REG_DEV_T2 0x0b +#define FSA9480_REG_BTN1 0x0c +#define FSA9480_REG_BTN2 0x0d +#define FSA9480_REG_CK 0x0e +#define FSA9480_REG_CK_INT1 0x0f +#define FSA9480_REG_CK_INT2 0x10 +#define FSA9480_REG_CK_INTMASK1 0x11 +#define FSA9480_REG_CK_INTMASK2 0x12 +#define FSA9480_REG_MANSW1 0x13 +#define FSA9480_REG_MANSW2 0x14 +#define FSA9480_REG_END 0x15 + +/* Control */ +#define CON_SWITCH_OPEN (1 << 4) +#define CON_RAW_DATA (1 << 3) +#define CON_MANUAL_SW (1 << 2) +#define CON_WAIT (1 << 1) +#define CON_INT_MASK (1 << 0) +#define CON_MASK (CON_SWITCH_OPEN | CON_RAW_DATA | \ + CON_MANUAL_SW | CON_WAIT) + +/* Device Type 1 */ +#define DEV_USB_OTG 7 +#define DEV_DEDICATED_CHG 6 +#define DEV_USB_CHG 5 +#define DEV_CAR_KIT 4 +#define DEV_UART 3 +#define DEV_USB 2 +#define DEV_AUDIO_2 1 +#define DEV_AUDIO_1 0 + +#define DEV_T1_USB_MASK (DEV_USB_OTG | DEV_USB) +#define DEV_T1_UART_MASK (DEV_UART) +#define DEV_T1_CHARGER_MASK (DEV_DEDICATED_CHG | DEV_USB_CHG) + +/* Device Type 2 */ +#define DEV_AV 14 +#define DEV_TTY 13 +#define DEV_PPD 12 +#define DEV_JIG_UART_OFF 11 +#define DEV_JIG_UART_ON 10 +#define DEV_JIG_USB_OFF 9 +#define DEV_JIG_USB_ON 8 + +#define DEV_T2_USB_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON) +#define DEV_T2_UART_MASK (DEV_JIG_UART_OFF | DEV_JIG_UART_ON) +#define DEV_T2_JIG_MASK (DEV_JIG_USB_OFF | DEV_JIG_USB_ON | \ + DEV_JIG_UART_OFF | DEV_JIG_UART_ON) + +/* + * Manual Switch + * D- [7:5] / D+ [4:2] + * 000: Open all / 001: USB / 010: AUDIO / 011: UART / 100: V_AUDIO + */ +#define SW_VAUDIO ((4 << 5) | (4 << 2)) +#define SW_UART ((3 << 5) | (3 << 2)) +#define SW_AUDIO ((2 << 5) | (2 << 2)) +#define SW_DHOST ((1 << 5) | (1 << 2)) +#define SW_AUTO ((0 << 5) | (0 << 2)) + +/* Interrupt 1 */ +#define INT1_MASK (0xff << 0) +#define INT_DETACH (1 << 1) +#define INT_ATTACH (1 << 0) + +/* Interrupt 2 mask */ +#define INT2_MASK (0x1f << 0) + +/* Timing Set 1 */ +#define TIMING1_ADC_500MS (0x6 << 0) + +struct fsa9480_usbsw { + struct device *dev; + struct regmap *regmap; + struct extcon_dev *edev; + u16 cable; +}; + +static const unsigned int fsa9480_extcon_cable[] = { + EXTCON_USB_HOST, + EXTCON_USB, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_ACA, + EXTCON_JACK_LINE_OUT, + EXTCON_JACK_VIDEO_OUT, + EXTCON_JIG, + + EXTCON_NONE, +}; + +static const u64 cable_types[] = { + [DEV_USB_OTG] = BIT_ULL(EXTCON_USB_HOST), + [DEV_DEDICATED_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_DCP), + [DEV_USB_CHG] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP), + [DEV_CAR_KIT] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP) + | BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_UART] = BIT_ULL(EXTCON_JIG), + [DEV_USB] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_CHG_USB_SDP), + [DEV_AUDIO_2] = BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_AUDIO_1] = BIT_ULL(EXTCON_JACK_LINE_OUT), + [DEV_AV] = BIT_ULL(EXTCON_JACK_LINE_OUT) + | BIT_ULL(EXTCON_JACK_VIDEO_OUT), + [DEV_TTY] = BIT_ULL(EXTCON_JIG), + [DEV_PPD] = BIT_ULL(EXTCON_JACK_LINE_OUT) | BIT_ULL(EXTCON_CHG_USB_ACA), + [DEV_JIG_UART_OFF] = BIT_ULL(EXTCON_JIG), + [DEV_JIG_UART_ON] = BIT_ULL(EXTCON_JIG), + [DEV_JIG_USB_OFF] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG), + [DEV_JIG_USB_ON] = BIT_ULL(EXTCON_USB) | BIT_ULL(EXTCON_JIG), +}; + +/* Define regmap configuration of FSA9480 for I2C communication */ +static bool fsa9480_volatile_reg(struct device *dev, unsigned int reg) +{ + switch (reg) { + case FSA9480_REG_INT1_MASK: + return true; + default: + break; + } + return false; +} + +static const struct regmap_config fsa9480_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .volatile_reg = fsa9480_volatile_reg, + .max_register = FSA9480_REG_END, +}; + +static int fsa9480_write_reg(struct fsa9480_usbsw *usbsw, int reg, int value) +{ + int ret; + + ret = regmap_write(usbsw->regmap, reg, value); + if (ret < 0) + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + + return ret; +} + +static int fsa9480_read_reg(struct fsa9480_usbsw *usbsw, int reg) +{ + int ret, val; + + ret = regmap_read(usbsw->regmap, reg, &val); + if (ret < 0) { + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + return ret; + } + + return val; +} + +static int fsa9480_read_irq(struct fsa9480_usbsw *usbsw, int *value) +{ + u8 regs[2]; + int ret; + + ret = regmap_bulk_read(usbsw->regmap, FSA9480_REG_INT1, regs, 2); + if (ret < 0) + dev_err(usbsw->dev, "%s: err %d\n", __func__, ret); + + *value = regs[1] << 8 | regs[0]; + return ret; +} + +static void fsa9480_handle_change(struct fsa9480_usbsw *usbsw, + u16 mask, bool attached) +{ + while (mask) { + int dev = fls64(mask) - 1; + u64 cables = cable_types[dev]; + + while (cables) { + int cable = fls64(cables) - 1; + + extcon_set_state_sync(usbsw->edev, cable, attached); + cables &= ~BIT_ULL(cable); + } + + mask &= ~BIT_ULL(dev); + } +} + +static void fsa9480_detect_dev(struct fsa9480_usbsw *usbsw) +{ + int val1, val2; + u16 val; + + val1 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T1); + val2 = fsa9480_read_reg(usbsw, FSA9480_REG_DEV_T2); + if (val1 < 0 || val2 < 0) { + dev_err(usbsw->dev, "%s: failed to read registers", __func__); + return; + } + val = val2 << 8 | val1; + + dev_info(usbsw->dev, "dev1: 0x%x, dev2: 0x%x\n", val1, val2); + + /* handle detached cables first */ + fsa9480_handle_change(usbsw, usbsw->cable & ~val, false); + + /* then handle attached ones */ + fsa9480_handle_change(usbsw, val & ~usbsw->cable, true); + + usbsw->cable = val; +} + +static irqreturn_t fsa9480_irq_handler(int irq, void *data) +{ + struct fsa9480_usbsw *usbsw = data; + int intr = 0; + + /* clear interrupt */ + fsa9480_read_irq(usbsw, &intr); + if (!intr) + return IRQ_NONE; + + /* device detection */ + fsa9480_detect_dev(usbsw); + + return IRQ_HANDLED; +} + +static int fsa9480_probe(struct i2c_client *client) +{ + struct fsa9480_usbsw *info; + int ret; + + if (!client->irq) { + dev_err(&client->dev, "no interrupt provided\n"); + return -EINVAL; + } + + info = devm_kzalloc(&client->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + info->dev = &client->dev; + + i2c_set_clientdata(client, info); + + /* External connector */ + info->edev = devm_extcon_dev_allocate(info->dev, + fsa9480_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(info->dev, "failed to allocate memory for extcon\n"); + ret = -ENOMEM; + return ret; + } + + ret = devm_extcon_dev_register(info->dev, info->edev); + if (ret) { + dev_err(info->dev, "failed to register extcon device\n"); + return ret; + } + + info->regmap = devm_regmap_init_i2c(client, &fsa9480_regmap_config); + if (IS_ERR(info->regmap)) { + ret = PTR_ERR(info->regmap); + dev_err(info->dev, "failed to allocate register map: %d\n", + ret); + return ret; + } + + /* ADC Detect Time: 500ms */ + fsa9480_write_reg(info, FSA9480_REG_TIMING1, TIMING1_ADC_500MS); + + /* configure automatic switching */ + fsa9480_write_reg(info, FSA9480_REG_CTRL, CON_MASK); + + /* unmask interrupt (attach/detach only) */ + fsa9480_write_reg(info, FSA9480_REG_INT1_MASK, + INT1_MASK & ~(INT_ATTACH | INT_DETACH)); + fsa9480_write_reg(info, FSA9480_REG_INT2_MASK, INT2_MASK); + + ret = devm_request_threaded_irq(info->dev, client->irq, NULL, + fsa9480_irq_handler, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "fsa9480", info); + if (ret) { + dev_err(info->dev, "failed to request IRQ\n"); + return ret; + } + + device_init_wakeup(info->dev, true); + fsa9480_detect_dev(info); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int fsa9480_suspend(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev) && client->irq) + enable_irq_wake(client->irq); + + return 0; +} + +static int fsa9480_resume(struct device *dev) +{ + struct i2c_client *client = to_i2c_client(dev); + + if (device_may_wakeup(&client->dev) && client->irq) + disable_irq_wake(client->irq); + + return 0; +} +#endif + +static const struct dev_pm_ops fsa9480_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(fsa9480_suspend, fsa9480_resume) +}; + +static const struct i2c_device_id fsa9480_id[] = { + { "fsa9480", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, fsa9480_id); + +static const struct of_device_id fsa9480_of_match[] = { + { .compatible = "fcs,fsa9480", }, + { .compatible = "fcs,fsa880", }, + { .compatible = "ti,tsu6111", }, + { }, +}; +MODULE_DEVICE_TABLE(of, fsa9480_of_match); + +static struct i2c_driver fsa9480_i2c_driver = { + .driver = { + .name = "fsa9480", + .pm = &fsa9480_pm_ops, + .of_match_table = fsa9480_of_match, + }, + .probe_new = fsa9480_probe, + .id_table = fsa9480_id, +}; + +static int __init fsa9480_module_init(void) +{ + return i2c_add_driver(&fsa9480_i2c_driver); +} +subsys_initcall(fsa9480_module_init); + +static void __exit fsa9480_module_exit(void) +{ + i2c_del_driver(&fsa9480_i2c_driver); +} +module_exit(fsa9480_module_exit); + +MODULE_DESCRIPTION("Fairchild Semiconductor FSA9480 extcon driver"); +MODULE_AUTHOR("Tomasz Figa "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3