From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/extcon/extcon-max77843.c | 966 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 966 insertions(+) create mode 100644 drivers/extcon/extcon-max77843.c (limited to 'drivers/extcon/extcon-max77843.c') diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c new file mode 100644 index 000000000..1bc0426ce --- /dev/null +++ b/drivers/extcon/extcon-max77843.c @@ -0,0 +1,966 @@ +// SPDX-License-Identifier: GPL-2.0+ +// +// extcon-max77843.c - Maxim MAX77843 extcon driver to support +// MUIC(Micro USB Interface Controller) +// +// Copyright (C) 2015 Samsung Electronics +// Author: Jaewon Kim + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DELAY_MS_DEFAULT 15000 /* unit: millisecond */ + +enum max77843_muic_status { + MAX77843_MUIC_STATUS1 = 0, + MAX77843_MUIC_STATUS2, + MAX77843_MUIC_STATUS3, + + MAX77843_MUIC_STATUS_NUM, +}; + +struct max77843_muic_info { + struct device *dev; + struct max77693_dev *max77843; + struct extcon_dev *edev; + + struct mutex mutex; + struct work_struct irq_work; + struct delayed_work wq_detcable; + + u8 status[MAX77843_MUIC_STATUS_NUM]; + int prev_cable_type; + int prev_chg_type; + int prev_gnd_type; + + bool irq_adc; + bool irq_chg; +}; + +enum max77843_muic_cable_group { + MAX77843_CABLE_GROUP_ADC = 0, + MAX77843_CABLE_GROUP_ADC_GND, + MAX77843_CABLE_GROUP_CHG, +}; + +enum max77843_muic_adc_debounce_time { + MAX77843_DEBOUNCE_TIME_5MS = 0, + MAX77843_DEBOUNCE_TIME_10MS, + MAX77843_DEBOUNCE_TIME_25MS, + MAX77843_DEBOUNCE_TIME_38_62MS, +}; + +/* Define accessory cable type */ +enum max77843_muic_accessory_type { + MAX77843_MUIC_ADC_GROUND = 0, + MAX77843_MUIC_ADC_SEND_END_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S1_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S2_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S3_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S4_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S5_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S6_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S7_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S8_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S9_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S10_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S11_BUTTON, + MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, + MAX77843_MUIC_ADC_RESERVED_ACC_1, + MAX77843_MUIC_ADC_RESERVED_ACC_2, + MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */ + MAX77843_MUIC_ADC_RESERVED_ACC_4, + MAX77843_MUIC_ADC_RESERVED_ACC_5, + MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, + MAX77843_MUIC_ADC_PHONE_POWERED_DEV, + MAX77843_MUIC_ADC_TTY_CONVERTER, + MAX77843_MUIC_ADC_UART_CABLE, + MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG, + MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF, + MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON, + MAX77843_MUIC_ADC_AV_CABLE_NOLOAD, + MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG, + MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF, + MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON, + MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1, + MAX77843_MUIC_ADC_OPEN, + + /* + * The below accessories should check + * not only ADC value but also ADC1K and VBVolt value. + */ + /* Offset|ADC1K|VBVolt| */ + MAX77843_MUIC_GND_USB_HOST = 0x100, /* 0x1| 0| 0| */ + MAX77843_MUIC_GND_USB_HOST_VB = 0x101, /* 0x1| 0| 1| */ + MAX77843_MUIC_GND_MHL = 0x102, /* 0x1| 1| 0| */ + MAX77843_MUIC_GND_MHL_VB = 0x103, /* 0x1| 1| 1| */ +}; + +/* Define charger cable type */ +enum max77843_muic_charger_type { + MAX77843_MUIC_CHG_NONE = 0, + MAX77843_MUIC_CHG_USB, + MAX77843_MUIC_CHG_DOWNSTREAM, + MAX77843_MUIC_CHG_DEDICATED, + MAX77843_MUIC_CHG_SPECIAL_500MA, + MAX77843_MUIC_CHG_SPECIAL_1A, + MAX77843_MUIC_CHG_SPECIAL_BIAS, + MAX77843_MUIC_CHG_RESERVED, + MAX77843_MUIC_CHG_GND, + MAX77843_MUIC_CHG_DOCK, +}; + +static const unsigned int max77843_extcon_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, + EXTCON_CHG_USB_SDP, + EXTCON_CHG_USB_DCP, + EXTCON_CHG_USB_CDP, + EXTCON_CHG_USB_FAST, + EXTCON_CHG_USB_SLOW, + EXTCON_DISP_MHL, + EXTCON_DOCK, + EXTCON_JIG, + EXTCON_NONE, +}; + +struct max77843_muic_irq { + unsigned int irq; + const char *name; + unsigned int virq; +}; + +static struct max77843_muic_irq max77843_muic_irqs[] = { + { MAX77843_MUIC_IRQ_INT1_ADC, "MUIC-ADC" }, + { MAX77843_MUIC_IRQ_INT1_ADCERROR, "MUIC-ADC_ERROR" }, + { MAX77843_MUIC_IRQ_INT1_ADC1K, "MUIC-ADC1K" }, + { MAX77843_MUIC_IRQ_INT2_CHGTYP, "MUIC-CHGTYP" }, + { MAX77843_MUIC_IRQ_INT2_CHGDETRUN, "MUIC-CHGDETRUN" }, + { MAX77843_MUIC_IRQ_INT2_DCDTMR, "MUIC-DCDTMR" }, + { MAX77843_MUIC_IRQ_INT2_DXOVP, "MUIC-DXOVP" }, + { MAX77843_MUIC_IRQ_INT2_VBVOLT, "MUIC-VBVOLT" }, + { MAX77843_MUIC_IRQ_INT3_VBADC, "MUIC-VBADC" }, + { MAX77843_MUIC_IRQ_INT3_VDNMON, "MUIC-VDNMON" }, + { MAX77843_MUIC_IRQ_INT3_DNRES, "MUIC-DNRES" }, + { MAX77843_MUIC_IRQ_INT3_MPNACK, "MUIC-MPNACK"}, + { MAX77843_MUIC_IRQ_INT3_MRXBUFOW, "MUIC-MRXBUFOW"}, + { MAX77843_MUIC_IRQ_INT3_MRXTRF, "MUIC-MRXTRF"}, + { MAX77843_MUIC_IRQ_INT3_MRXPERR, "MUIC-MRXPERR"}, + { MAX77843_MUIC_IRQ_INT3_MRXRDY, "MUIC-MRXRDY"}, +}; + +static const struct regmap_config max77843_muic_regmap_config = { + .reg_bits = 8, + .val_bits = 8, + .max_register = MAX77843_MUIC_REG_END, +}; + +static const struct regmap_irq max77843_muic_irq[] = { + /* INT1 interrupt */ + { .reg_offset = 0, .mask = MAX77843_MUIC_ADC, }, + { .reg_offset = 0, .mask = MAX77843_MUIC_ADCERROR, }, + { .reg_offset = 0, .mask = MAX77843_MUIC_ADC1K, }, + + /* INT2 interrupt */ + { .reg_offset = 1, .mask = MAX77843_MUIC_CHGTYP, }, + { .reg_offset = 1, .mask = MAX77843_MUIC_CHGDETRUN, }, + { .reg_offset = 1, .mask = MAX77843_MUIC_DCDTMR, }, + { .reg_offset = 1, .mask = MAX77843_MUIC_DXOVP, }, + { .reg_offset = 1, .mask = MAX77843_MUIC_VBVOLT, }, + + /* INT3 interrupt */ + { .reg_offset = 2, .mask = MAX77843_MUIC_VBADC, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_VDNMON, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_DNRES, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_MPNACK, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXBUFOW, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXTRF, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXPERR, }, + { .reg_offset = 2, .mask = MAX77843_MUIC_MRXRDY, }, +}; + +static const struct regmap_irq_chip max77843_muic_irq_chip = { + .name = "max77843-muic", + .status_base = MAX77843_MUIC_REG_INT1, + .unmask_base = MAX77843_MUIC_REG_INTMASK1, + .num_regs = 3, + .irqs = max77843_muic_irq, + .num_irqs = ARRAY_SIZE(max77843_muic_irq), +}; + +static int max77843_muic_set_path(struct max77843_muic_info *info, + u8 val, bool attached, bool nobccomp) +{ + struct max77693_dev *max77843 = info->max77843; + int ret = 0; + unsigned int ctrl1, ctrl2; + + if (attached) + ctrl1 = val; + else + ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; + if (nobccomp) { + /* Disable BC1.2 protocol and force manual switch control */ + ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK; + } + + ret = regmap_update_bits(max77843->regmap_muic, + MAX77843_MUIC_REG_CONTROL1, + MAX77843_MUIC_CONTROL1_COM_SW | + MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK, + ctrl1); + if (ret < 0) { + dev_err(info->dev, "Cannot switch MUIC port\n"); + return ret; + } + + if (attached) + ctrl2 = MAX77843_MUIC_CONTROL2_CPEN_MASK; + else + ctrl2 = MAX77843_MUIC_CONTROL2_LOWPWR_MASK; + + ret = regmap_update_bits(max77843->regmap_muic, + MAX77843_MUIC_REG_CONTROL2, + MAX77843_MUIC_CONTROL2_LOWPWR_MASK | + MAX77843_MUIC_CONTROL2_CPEN_MASK, ctrl2); + if (ret < 0) { + dev_err(info->dev, "Cannot update lowpower mode\n"); + return ret; + } + + dev_dbg(info->dev, + "CONTROL1 : 0x%02x, CONTROL2 : 0x%02x, state : %s\n", + ctrl1, ctrl2, attached ? "attached" : "detached"); + + return 0; +} + +static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info, + bool on) +{ + struct max77693_dev *max77843 = info->max77843; + unsigned int cnfg00; + + if (on) + cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK; + else + cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK; + + regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00, + MAX77843_CHG_MODE_MASK, cnfg00); +} + +static int max77843_muic_get_cable_type(struct max77843_muic_info *info, + enum max77843_muic_cable_group group, bool *attached) +{ + int adc, chg_type, cable_type, gnd_type; + + adc = info->status[MAX77843_MUIC_STATUS1] & + MAX77843_MUIC_STATUS1_ADC_MASK; + adc >>= MAX77843_MUIC_STATUS1_ADC_SHIFT; + + switch (group) { + case MAX77843_CABLE_GROUP_ADC: + if (adc == MAX77843_MUIC_ADC_OPEN) { + *attached = false; + cable_type = info->prev_cable_type; + info->prev_cable_type = MAX77843_MUIC_ADC_OPEN; + } else { + *attached = true; + cable_type = info->prev_cable_type = adc; + } + break; + case MAX77843_CABLE_GROUP_CHG: + chg_type = info->status[MAX77843_MUIC_STATUS2] & + MAX77843_MUIC_STATUS2_CHGTYP_MASK; + + /* Check GROUND accessory with charger cable */ + if (adc == MAX77843_MUIC_ADC_GROUND) { + if (chg_type == MAX77843_MUIC_CHG_NONE) { + /* + * The following state when charger cable is + * disconnected but the GROUND accessory still + * connected. + */ + *attached = false; + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; + } else { + + /* + * The following state when charger cable is + * connected on the GROUND accessory. + */ + *attached = true; + cable_type = MAX77843_MUIC_CHG_GND; + info->prev_chg_type = MAX77843_MUIC_CHG_GND; + } + break; + } + + if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */ + if (chg_type == MAX77843_MUIC_CHG_NONE) { + *attached = false; + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; + } else { + *attached = true; + cable_type = MAX77843_MUIC_CHG_DOCK; + info->prev_chg_type = MAX77843_MUIC_CHG_DOCK; + } + break; + } + + if (chg_type == MAX77843_MUIC_CHG_NONE) { + *attached = false; + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; + } else { + *attached = true; + cable_type = info->prev_chg_type = chg_type; + } + break; + case MAX77843_CABLE_GROUP_ADC_GND: + if (adc == MAX77843_MUIC_ADC_OPEN) { + *attached = false; + cable_type = info->prev_gnd_type; + info->prev_gnd_type = MAX77843_MUIC_ADC_OPEN; + } else { + *attached = true; + + /* + * Offset|ADC1K|VBVolt| + * 0x1| 0| 0| USB-HOST + * 0x1| 0| 1| USB-HOST with VB + * 0x1| 1| 0| MHL + * 0x1| 1| 1| MHL with VB + */ + /* Get ADC1K register bit */ + gnd_type = (info->status[MAX77843_MUIC_STATUS1] & + MAX77843_MUIC_STATUS1_ADC1K_MASK); + + /* Get VBVolt register bit */ + gnd_type |= (info->status[MAX77843_MUIC_STATUS2] & + MAX77843_MUIC_STATUS2_VBVOLT_MASK); + gnd_type >>= MAX77843_MUIC_STATUS2_VBVOLT_SHIFT; + + /* Offset of GND cable */ + gnd_type |= MAX77843_MUIC_GND_USB_HOST; + cable_type = info->prev_gnd_type = gnd_type; + } + break; + default: + dev_err(info->dev, "Unknown cable group (%d)\n", group); + cable_type = -EINVAL; + break; + } + + return cable_type; +} + +static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) +{ + int ret, gnd_cable_type; + bool attached; + + gnd_cable_type = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_ADC_GND, &attached); + dev_dbg(info->dev, "external connector is %s (gnd:0x%02x)\n", + attached ? "attached" : "detached", gnd_cable_type); + + switch (gnd_cable_type) { + case MAX77843_MUIC_GND_USB_HOST: + case MAX77843_MUIC_GND_USB_HOST_VB: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_USB, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + max77843_charger_set_otg_vbus(info, attached); + break; + case MAX77843_MUIC_GND_MHL_VB: + case MAX77843_MUIC_GND_MHL: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); + break; + default: + dev_err(info->dev, "failed to detect %s accessory(gnd:0x%x)\n", + attached ? "attached" : "detached", gnd_cable_type); + return -EINVAL; + } + + return 0; +} + +static int max77843_muic_jig_handler(struct max77843_muic_info *info, + int cable_type, bool attached) +{ + int ret; + u8 path = MAX77843_MUIC_CONTROL1_SW_OPEN; + + dev_dbg(info->dev, "external connector is %s (adc:0x%02x)\n", + attached ? "attached" : "detached", cable_type); + + switch (cable_type) { + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: + path = MAX77843_MUIC_CONTROL1_SW_USB; + break; + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: + path = MAX77843_MUIC_CONTROL1_SW_UART; + break; + default: + return -EINVAL; + } + + ret = max77843_muic_set_path(info, path, attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_JIG, attached); + + return 0; +} + +static int max77843_muic_dock_handler(struct max77843_muic_info *info, + bool attached) +{ + int ret; + + dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n", + attached ? "attached" : "detached"); + + ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, + attached, attached); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); + + return 0; +} + +static int max77843_muic_adc_handler(struct max77843_muic_info *info) +{ + int ret, cable_type; + bool attached; + + cable_type = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_ADC, &attached); + + dev_dbg(info->dev, + "external connector is %s (adc:0x%02x, prev_adc:0x%x)\n", + attached ? "attached" : "detached", cable_type, + info->prev_cable_type); + + switch (cable_type) { + case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */ + ret = max77843_muic_dock_handler(info, attached); + if (ret < 0) + return ret; + break; + case MAX77843_MUIC_ADC_GROUND: + ret = max77843_muic_adc_gnd_handler(info); + if (ret < 0) + return ret; + break; + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_OFF: + case MAX77843_MUIC_ADC_FACTORY_MODE_USB_ON: + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF: + ret = max77843_muic_jig_handler(info, cable_type, attached); + if (ret < 0) + return ret; + break; + case MAX77843_MUIC_ADC_SEND_END_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S1_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S2_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S3_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S4_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S5_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S6_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S7_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S8_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S9_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S10_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S11_BUTTON: + case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: + case MAX77843_MUIC_ADC_RESERVED_ACC_1: + case MAX77843_MUIC_ADC_RESERVED_ACC_2: + case MAX77843_MUIC_ADC_RESERVED_ACC_4: + case MAX77843_MUIC_ADC_RESERVED_ACC_5: + case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: + case MAX77843_MUIC_ADC_PHONE_POWERED_DEV: + case MAX77843_MUIC_ADC_TTY_CONVERTER: + case MAX77843_MUIC_ADC_UART_CABLE: + case MAX77843_MUIC_ADC_CEA936A_TYPE1_CHG: + case MAX77843_MUIC_ADC_AV_CABLE_NOLOAD: + case MAX77843_MUIC_ADC_CEA936A_TYPE2_CHG: + case MAX77843_MUIC_ADC_FACTORY_MODE_UART_ON: + case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE1: + case MAX77843_MUIC_ADC_OPEN: + dev_err(info->dev, + "accessory is %s but it isn't used (adc:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EAGAIN; + default: + dev_err(info->dev, + "failed to detect %s accessory (adc:0x%x)\n", + attached ? "attached" : "detached", cable_type); + return -EINVAL; + } + + return 0; +} + +static int max77843_muic_chg_handler(struct max77843_muic_info *info) +{ + int ret, chg_type, gnd_type; + bool attached; + + chg_type = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_CHG, &attached); + + dev_dbg(info->dev, + "external connector is %s(chg_type:0x%x, prev_chg_type:0x%x)\n", + attached ? "attached" : "detached", + chg_type, info->prev_chg_type); + + switch (chg_type) { + case MAX77843_MUIC_CHG_USB: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_USB, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_USB, attached); + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SDP, + attached); + break; + case MAX77843_MUIC_CHG_DOWNSTREAM: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_CDP, + attached); + break; + case MAX77843_MUIC_CHG_DEDICATED: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, + attached); + break; + case MAX77843_MUIC_CHG_SPECIAL_500MA: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_SLOW, + attached); + break; + case MAX77843_MUIC_CHG_SPECIAL_1A: + ret = max77843_muic_set_path(info, + MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_FAST, + attached); + break; + case MAX77843_MUIC_CHG_GND: + gnd_type = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_ADC_GND, &attached); + + /* Charger cable on MHL accessory is attach or detach */ + if (gnd_type == MAX77843_MUIC_GND_MHL_VB) + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, + true); + else if (gnd_type == MAX77843_MUIC_GND_MHL) + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, + false); + break; + case MAX77843_MUIC_CHG_DOCK: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); + break; + case MAX77843_MUIC_CHG_NONE: + break; + default: + dev_err(info->dev, + "failed to detect %s accessory (chg_type:0x%x)\n", + attached ? "attached" : "detached", chg_type); + + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, + attached, false); + return -EINVAL; + } + + return 0; +} + +static void max77843_muic_irq_work(struct work_struct *work) +{ + struct max77843_muic_info *info = container_of(work, + struct max77843_muic_info, irq_work); + struct max77693_dev *max77843 = info->max77843; + int ret = 0; + + mutex_lock(&info->mutex); + + ret = regmap_bulk_read(max77843->regmap_muic, + MAX77843_MUIC_REG_STATUS1, info->status, + MAX77843_MUIC_STATUS_NUM); + if (ret) { + dev_err(info->dev, "Cannot read STATUS registers\n"); + mutex_unlock(&info->mutex); + return; + } + + if (info->irq_adc) { + ret = max77843_muic_adc_handler(info); + if (ret) + dev_err(info->dev, "Unknown cable type\n"); + info->irq_adc = false; + } + + if (info->irq_chg) { + ret = max77843_muic_chg_handler(info); + if (ret) + dev_err(info->dev, "Unknown charger type\n"); + info->irq_chg = false; + } + + mutex_unlock(&info->mutex); +} + +static irqreturn_t max77843_muic_irq_handler(int irq, void *data) +{ + struct max77843_muic_info *info = data; + int i, irq_type = -1; + + for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) + if (irq == max77843_muic_irqs[i].virq) + irq_type = max77843_muic_irqs[i].irq; + + switch (irq_type) { + case MAX77843_MUIC_IRQ_INT1_ADC: + case MAX77843_MUIC_IRQ_INT1_ADCERROR: + case MAX77843_MUIC_IRQ_INT1_ADC1K: + info->irq_adc = true; + break; + case MAX77843_MUIC_IRQ_INT2_CHGTYP: + case MAX77843_MUIC_IRQ_INT2_CHGDETRUN: + case MAX77843_MUIC_IRQ_INT2_DCDTMR: + case MAX77843_MUIC_IRQ_INT2_DXOVP: + case MAX77843_MUIC_IRQ_INT2_VBVOLT: + info->irq_chg = true; + break; + case MAX77843_MUIC_IRQ_INT3_VBADC: + case MAX77843_MUIC_IRQ_INT3_VDNMON: + case MAX77843_MUIC_IRQ_INT3_DNRES: + case MAX77843_MUIC_IRQ_INT3_MPNACK: + case MAX77843_MUIC_IRQ_INT3_MRXBUFOW: + case MAX77843_MUIC_IRQ_INT3_MRXTRF: + case MAX77843_MUIC_IRQ_INT3_MRXPERR: + case MAX77843_MUIC_IRQ_INT3_MRXRDY: + break; + default: + dev_err(info->dev, "Cannot recognize IRQ(%d)\n", irq_type); + break; + } + + schedule_work(&info->irq_work); + + return IRQ_HANDLED; +} + +static void max77843_muic_detect_cable_wq(struct work_struct *work) +{ + struct max77843_muic_info *info = container_of(to_delayed_work(work), + struct max77843_muic_info, wq_detcable); + struct max77693_dev *max77843 = info->max77843; + int chg_type, adc, ret; + bool attached; + + mutex_lock(&info->mutex); + + ret = regmap_bulk_read(max77843->regmap_muic, + MAX77843_MUIC_REG_STATUS1, info->status, + MAX77843_MUIC_STATUS_NUM); + if (ret) { + dev_err(info->dev, "Cannot read STATUS registers\n"); + goto err_cable_wq; + } + + adc = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_ADC, &attached); + if (attached && adc != MAX77843_MUIC_ADC_OPEN) { + ret = max77843_muic_adc_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect accessory\n"); + goto err_cable_wq; + } + } + + chg_type = max77843_muic_get_cable_type(info, + MAX77843_CABLE_GROUP_CHG, &attached); + if (attached && chg_type != MAX77843_MUIC_CHG_NONE) { + ret = max77843_muic_chg_handler(info); + if (ret < 0) { + dev_err(info->dev, "Cannot detect charger accessory\n"); + goto err_cable_wq; + } + } + +err_cable_wq: + mutex_unlock(&info->mutex); +} + +static int max77843_muic_set_debounce_time(struct max77843_muic_info *info, + enum max77843_muic_adc_debounce_time time) +{ + struct max77693_dev *max77843 = info->max77843; + int ret; + + switch (time) { + case MAX77843_DEBOUNCE_TIME_5MS: + case MAX77843_DEBOUNCE_TIME_10MS: + case MAX77843_DEBOUNCE_TIME_25MS: + case MAX77843_DEBOUNCE_TIME_38_62MS: + ret = regmap_update_bits(max77843->regmap_muic, + MAX77843_MUIC_REG_CONTROL4, + MAX77843_MUIC_CONTROL4_ADCDBSET_MASK, + time << MAX77843_MUIC_CONTROL4_ADCDBSET_SHIFT); + if (ret < 0) { + dev_err(info->dev, "Cannot write MUIC regmap\n"); + return ret; + } + break; + default: + dev_err(info->dev, "Invalid ADC debounce time\n"); + return -EINVAL; + } + + return 0; +} + +static int max77843_init_muic_regmap(struct max77693_dev *max77843) +{ + int ret; + + max77843->i2c_muic = i2c_new_dummy_device(max77843->i2c->adapter, + I2C_ADDR_MUIC); + if (IS_ERR(max77843->i2c_muic)) { + dev_err(&max77843->i2c->dev, + "Cannot allocate I2C device for MUIC\n"); + return PTR_ERR(max77843->i2c_muic); + } + + i2c_set_clientdata(max77843->i2c_muic, max77843); + + max77843->regmap_muic = devm_regmap_init_i2c(max77843->i2c_muic, + &max77843_muic_regmap_config); + if (IS_ERR(max77843->regmap_muic)) { + ret = PTR_ERR(max77843->regmap_muic); + goto err_muic_i2c; + } + + ret = regmap_add_irq_chip(max77843->regmap_muic, max77843->irq, + IRQF_TRIGGER_LOW | IRQF_ONESHOT | IRQF_SHARED, + 0, &max77843_muic_irq_chip, &max77843->irq_data_muic); + if (ret < 0) { + dev_err(&max77843->i2c->dev, "Cannot add MUIC IRQ chip\n"); + goto err_muic_i2c; + } + + return 0; + +err_muic_i2c: + i2c_unregister_device(max77843->i2c_muic); + + return ret; +} + +static int max77843_muic_probe(struct platform_device *pdev) +{ + struct max77693_dev *max77843 = dev_get_drvdata(pdev->dev.parent); + struct max77843_muic_info *info; + unsigned int id; + int cable_type; + bool attached; + int i, ret; + + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); + if (!info) + return -ENOMEM; + + info->dev = &pdev->dev; + info->max77843 = max77843; + + platform_set_drvdata(pdev, info); + mutex_init(&info->mutex); + + /* Initialize i2c and regmap */ + ret = max77843_init_muic_regmap(max77843); + if (ret) { + dev_err(&pdev->dev, "Failed to init MUIC regmap\n"); + return ret; + } + + /* Turn off auto detection configuration */ + ret = regmap_update_bits(max77843->regmap_muic, + MAX77843_MUIC_REG_CONTROL4, + MAX77843_MUIC_CONTROL4_USBAUTO_MASK | + MAX77843_MUIC_CONTROL4_FCTAUTO_MASK, + CONTROL4_AUTO_DISABLE); + + /* Initialize extcon device */ + info->edev = devm_extcon_dev_allocate(&pdev->dev, + max77843_extcon_cable); + if (IS_ERR(info->edev)) { + dev_err(&pdev->dev, "Failed to allocate memory for extcon\n"); + ret = PTR_ERR(info->edev); + goto err_muic_irq; + } + + ret = devm_extcon_dev_register(&pdev->dev, info->edev); + if (ret) { + dev_err(&pdev->dev, "Failed to register extcon device\n"); + goto err_muic_irq; + } + + /* Set ADC debounce time */ + max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); + + /* Set initial path for UART when JIG is connected to get serial logs */ + ret = regmap_bulk_read(max77843->regmap_muic, + MAX77843_MUIC_REG_STATUS1, info->status, + MAX77843_MUIC_STATUS_NUM); + if (ret) { + dev_err(info->dev, "Cannot read STATUS registers\n"); + goto err_muic_irq; + } + cable_type = max77843_muic_get_cable_type(info, MAX77843_CABLE_GROUP_ADC, + &attached); + if (attached && cable_type == MAX77843_MUIC_ADC_FACTORY_MODE_UART_OFF) + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, + true, false); + + /* Check revision number of MUIC device */ + ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); + if (ret < 0) { + dev_err(&pdev->dev, "Failed to read revision number\n"); + goto err_muic_irq; + } + dev_info(info->dev, "MUIC device ID : 0x%x\n", id); + + /* Support virtual irq domain for max77843 MUIC device */ + INIT_WORK(&info->irq_work, max77843_muic_irq_work); + + /* Clear IRQ bits before request IRQs */ + ret = regmap_bulk_read(max77843->regmap_muic, + MAX77843_MUIC_REG_INT1, info->status, + MAX77843_MUIC_STATUS_NUM); + if (ret) { + dev_err(&pdev->dev, "Failed to Clear IRQ bits\n"); + goto err_muic_irq; + } + + for (i = 0; i < ARRAY_SIZE(max77843_muic_irqs); i++) { + struct max77843_muic_irq *muic_irq = &max77843_muic_irqs[i]; + int virq = 0; + + virq = regmap_irq_get_virq(max77843->irq_data_muic, + muic_irq->irq); + if (virq <= 0) { + ret = -EINVAL; + goto err_muic_irq; + } + muic_irq->virq = virq; + + ret = devm_request_threaded_irq(&pdev->dev, virq, NULL, + max77843_muic_irq_handler, IRQF_NO_SUSPEND, + muic_irq->name, info); + if (ret) { + dev_err(&pdev->dev, + "Failed to request irq (IRQ: %d, error: %d)\n", + muic_irq->irq, ret); + goto err_muic_irq; + } + } + + /* Detect accessory after completing the initialization of platform */ + INIT_DELAYED_WORK(&info->wq_detcable, max77843_muic_detect_cable_wq); + queue_delayed_work(system_power_efficient_wq, + &info->wq_detcable, msecs_to_jiffies(DELAY_MS_DEFAULT)); + + return 0; + +err_muic_irq: + regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); + i2c_unregister_device(max77843->i2c_muic); + + return ret; +} + +static int max77843_muic_remove(struct platform_device *pdev) +{ + struct max77843_muic_info *info = platform_get_drvdata(pdev); + struct max77693_dev *max77843 = info->max77843; + + cancel_work_sync(&info->irq_work); + regmap_del_irq_chip(max77843->irq, max77843->irq_data_muic); + i2c_unregister_device(max77843->i2c_muic); + + return 0; +} + +static const struct platform_device_id max77843_muic_id[] = { + { "max77843-muic", }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(platform, max77843_muic_id); + +static struct platform_driver max77843_muic_driver = { + .driver = { + .name = "max77843-muic", + }, + .probe = max77843_muic_probe, + .remove = max77843_muic_remove, + .id_table = max77843_muic_id, +}; + +static int __init max77843_muic_init(void) +{ + return platform_driver_register(&max77843_muic_driver); +} +subsys_initcall(max77843_muic_init); + +MODULE_DESCRIPTION("Maxim MAX77843 Extcon driver"); +MODULE_AUTHOR("Jaewon Kim "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3