From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/firmware/efi/apple-properties.c | 237 ++++++++++++++++++++++++++++++++ 1 file changed, 237 insertions(+) create mode 100644 drivers/firmware/efi/apple-properties.c (limited to 'drivers/firmware/efi/apple-properties.c') diff --git a/drivers/firmware/efi/apple-properties.c b/drivers/firmware/efi/apple-properties.c new file mode 100644 index 000000000..ea8410803 --- /dev/null +++ b/drivers/firmware/efi/apple-properties.c @@ -0,0 +1,237 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * apple-properties.c - EFI device properties on Macs + * Copyright (C) 2016 Lukas Wunner + * + * Properties are stored either as: + * u8 arrays which can be retrieved with device_property_read_u8_array() or + * booleans which can be queried with device_property_present(). + */ + +#define pr_fmt(fmt) "apple-properties: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +static bool dump_properties __initdata; + +static int __init dump_properties_enable(char *arg) +{ + dump_properties = true; + return 1; +} + +__setup("dump_apple_properties", dump_properties_enable); + +struct dev_header { + u32 len; + u32 prop_count; + struct efi_dev_path path[]; + /* + * followed by key/value pairs, each key and value preceded by u32 len, + * len includes itself, value may be empty (in which case its len is 4) + */ +}; + +struct properties_header { + u32 len; + u32 version; + u32 dev_count; + struct dev_header dev_header[]; +}; + +static void __init unmarshal_key_value_pairs(struct dev_header *dev_header, + struct device *dev, const void *ptr, + struct property_entry entry[]) +{ + int i; + + for (i = 0; i < dev_header->prop_count; i++) { + int remaining = dev_header->len - (ptr - (void *)dev_header); + u32 key_len, val_len, entry_len; + const u8 *entry_data; + char *key; + + if (sizeof(key_len) > remaining) + break; + + key_len = *(typeof(key_len) *)ptr; + if (key_len + sizeof(val_len) > remaining || + key_len < sizeof(key_len) + sizeof(efi_char16_t) || + *(efi_char16_t *)(ptr + sizeof(key_len)) == 0) { + dev_err(dev, "invalid property name len at %#zx\n", + ptr - (void *)dev_header); + break; + } + + val_len = *(typeof(val_len) *)(ptr + key_len); + if (key_len + val_len > remaining || + val_len < sizeof(val_len)) { + dev_err(dev, "invalid property val len at %#zx\n", + ptr - (void *)dev_header + key_len); + break; + } + + /* 4 bytes to accommodate UTF-8 code points + null byte */ + key = kzalloc((key_len - sizeof(key_len)) * 4 + 1, GFP_KERNEL); + if (!key) { + dev_err(dev, "cannot allocate property name\n"); + break; + } + ucs2_as_utf8(key, ptr + sizeof(key_len), + key_len - sizeof(key_len)); + + entry_data = ptr + key_len + sizeof(val_len); + entry_len = val_len - sizeof(val_len); + if (entry_len) + entry[i] = PROPERTY_ENTRY_U8_ARRAY_LEN(key, entry_data, + entry_len); + else + entry[i] = PROPERTY_ENTRY_BOOL(key); + + if (dump_properties) { + dev_info(dev, "property: %s\n", key); + print_hex_dump(KERN_INFO, pr_fmt(), DUMP_PREFIX_OFFSET, + 16, 1, entry_data, entry_len, true); + } + + ptr += key_len + val_len; + } + + if (i != dev_header->prop_count) { + dev_err(dev, "got %d device properties, expected %u\n", i, + dev_header->prop_count); + print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET, + 16, 1, dev_header, dev_header->len, true); + return; + } + + dev_info(dev, "assigning %d device properties\n", i); +} + +static int __init unmarshal_devices(struct properties_header *properties) +{ + size_t offset = offsetof(struct properties_header, dev_header[0]); + + while (offset + sizeof(struct dev_header) < properties->len) { + struct dev_header *dev_header = (void *)properties + offset; + struct property_entry *entry = NULL; + const struct efi_dev_path *ptr; + struct device *dev; + size_t len; + int ret, i; + + if (offset + dev_header->len > properties->len || + dev_header->len <= sizeof(*dev_header)) { + pr_err("invalid len in dev_header at %#zx\n", offset); + return -EINVAL; + } + + ptr = dev_header->path; + len = dev_header->len - sizeof(*dev_header); + + dev = efi_get_device_by_path(&ptr, &len); + if (IS_ERR(dev)) { + pr_err("device path parse error %ld at %#zx:\n", + PTR_ERR(dev), (void *)ptr - (void *)dev_header); + print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET, + 16, 1, dev_header, dev_header->len, true); + dev = NULL; + goto skip_device; + } + + entry = kcalloc(dev_header->prop_count + 1, sizeof(*entry), + GFP_KERNEL); + if (!entry) { + dev_err(dev, "cannot allocate properties\n"); + goto skip_device; + } + + unmarshal_key_value_pairs(dev_header, dev, ptr, entry); + if (!entry[0].name) + goto skip_device; + + ret = device_create_managed_software_node(dev, entry, NULL); + if (ret) + dev_err(dev, "error %d assigning properties\n", ret); + + for (i = 0; entry[i].name; i++) + kfree(entry[i].name); + +skip_device: + kfree(entry); + put_device(dev); + offset += dev_header->len; + } + + return 0; +} + +static int __init map_properties(void) +{ + struct properties_header *properties; + struct setup_data *data; + u32 data_len; + u64 pa_data; + int ret; + + if (!x86_apple_machine) + return 0; + + pa_data = boot_params.hdr.setup_data; + while (pa_data) { + data = memremap(pa_data, sizeof(*data), MEMREMAP_WB); + if (!data) { + pr_err("cannot map setup_data header\n"); + return -ENOMEM; + } + + if (data->type != SETUP_APPLE_PROPERTIES) { + pa_data = data->next; + memunmap(data); + continue; + } + + data_len = data->len; + memunmap(data); + + data = memremap(pa_data, sizeof(*data) + data_len, MEMREMAP_WB); + if (!data) { + pr_err("cannot map setup_data payload\n"); + return -ENOMEM; + } + + properties = (struct properties_header *)data->data; + if (properties->version != 1) { + pr_err("unsupported version:\n"); + print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET, + 16, 1, properties, data_len, true); + ret = -ENOTSUPP; + } else if (properties->len != data_len) { + pr_err("length mismatch, expected %u\n", data_len); + print_hex_dump(KERN_ERR, pr_fmt(), DUMP_PREFIX_OFFSET, + 16, 1, properties, data_len, true); + ret = -EINVAL; + } else + ret = unmarshal_devices(properties); + + /* + * Can only free the setup_data payload but not its header + * to avoid breaking the chain of ->next pointers. + */ + data->len = 0; + memunmap(data); + memblock_free_late(pa_data + sizeof(*data), data_len); + + return ret; + } + return 0; +} + +fs_initcall(map_properties); -- cgit v1.2.3