From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/firmware/efi/dev-path-parser.c | 184 +++++++++++++++++++++++++++++++++ 1 file changed, 184 insertions(+) create mode 100644 drivers/firmware/efi/dev-path-parser.c (limited to 'drivers/firmware/efi/dev-path-parser.c') diff --git a/drivers/firmware/efi/dev-path-parser.c b/drivers/firmware/efi/dev-path-parser.c new file mode 100644 index 000000000..f80d87c19 --- /dev/null +++ b/drivers/firmware/efi/dev-path-parser.c @@ -0,0 +1,184 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * dev-path-parser.c - EFI Device Path parser + * Copyright (C) 2016 Lukas Wunner + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License (version 2) as + * published by the Free Software Foundation. + */ + +#include +#include +#include + +static long __init parse_acpi_path(const struct efi_dev_path *node, + struct device *parent, struct device **child) +{ + struct acpi_device *adev; + struct device *phys_dev; + char hid[ACPI_ID_LEN]; + u64 uid; + int ret; + + if (node->header.length != 12) + return -EINVAL; + + sprintf(hid, "%c%c%c%04X", + 'A' + ((node->acpi.hid >> 10) & 0x1f) - 1, + 'A' + ((node->acpi.hid >> 5) & 0x1f) - 1, + 'A' + ((node->acpi.hid >> 0) & 0x1f) - 1, + node->acpi.hid >> 16); + + for_each_acpi_dev_match(adev, hid, NULL, -1) { + ret = acpi_dev_uid_to_integer(adev, &uid); + if (ret == 0 && node->acpi.uid == uid) + break; + if (ret == -ENODATA && node->acpi.uid == 0) + break; + } + if (!adev) + return -ENODEV; + + phys_dev = acpi_get_first_physical_node(adev); + if (phys_dev) { + *child = get_device(phys_dev); + acpi_dev_put(adev); + } else + *child = &adev->dev; + + return 0; +} + +static int __init match_pci_dev(struct device *dev, void *data) +{ + unsigned int devfn = *(unsigned int *)data; + + return dev_is_pci(dev) && to_pci_dev(dev)->devfn == devfn; +} + +static long __init parse_pci_path(const struct efi_dev_path *node, + struct device *parent, struct device **child) +{ + unsigned int devfn; + + if (node->header.length != 6) + return -EINVAL; + if (!parent) + return -EINVAL; + + devfn = PCI_DEVFN(node->pci.dev, node->pci.fn); + + *child = device_find_child(parent, &devfn, match_pci_dev); + if (!*child) + return -ENODEV; + + return 0; +} + +/* + * Insert parsers for further node types here. + * + * Each parser takes a pointer to the @node and to the @parent (will be NULL + * for the first device path node). If a device corresponding to @node was + * found below @parent, its reference count should be incremented and the + * device returned in @child. + * + * The return value should be 0 on success or a negative int on failure. + * The special return values 0x01 (EFI_DEV_END_INSTANCE) and 0xFF + * (EFI_DEV_END_ENTIRE) signal the end of the device path, only + * parse_end_path() is supposed to return this. + * + * Be sure to validate the node length and contents before commencing the + * search for a device. + */ + +static long __init parse_end_path(const struct efi_dev_path *node, + struct device *parent, struct device **child) +{ + if (node->header.length != 4) + return -EINVAL; + if (node->header.sub_type != EFI_DEV_END_INSTANCE && + node->header.sub_type != EFI_DEV_END_ENTIRE) + return -EINVAL; + if (!parent) + return -ENODEV; + + *child = get_device(parent); + return node->header.sub_type; +} + +/** + * efi_get_device_by_path - find device by EFI Device Path + * @node: EFI Device Path + * @len: maximum length of EFI Device Path in bytes + * + * Parse a series of EFI Device Path nodes at @node and find the corresponding + * device. If the device was found, its reference count is incremented and a + * pointer to it is returned. The caller needs to drop the reference with + * put_device() after use. The @node pointer is updated to point to the + * location immediately after the "End of Hardware Device Path" node. + * + * If another Device Path instance follows, @len is decremented by the number + * of bytes consumed. Otherwise @len is set to %0. + * + * If a Device Path node is malformed or its corresponding device is not found, + * @node is updated to point to this offending node and an ERR_PTR is returned. + * + * If @len is initially %0, the function returns %NULL. Thus, to iterate over + * all instances in a path, the following idiom may be used: + * + * while (!IS_ERR_OR_NULL(dev = efi_get_device_by_path(&node, &len))) { + * // do something with dev + * put_device(dev); + * } + * if (IS_ERR(dev)) + * // report error + * + * Devices can only be found if they're already instantiated. Most buses + * instantiate devices in the "subsys" initcall level, hence the earliest + * initcall level in which this function should be called is "fs". + * + * Returns the device on success or + * %ERR_PTR(-ENODEV) if no device was found, + * %ERR_PTR(-EINVAL) if a node is malformed or exceeds @len, + * %ERR_PTR(-ENOTSUPP) if support for a node type is not yet implemented. + */ +struct device * __init efi_get_device_by_path(const struct efi_dev_path **node, + size_t *len) +{ + struct device *parent = NULL, *child; + long ret = 0; + + if (!*len) + return NULL; + + while (!ret) { + if (*len < 4 || *len < (*node)->header.length) + ret = -EINVAL; + else if ((*node)->header.type == EFI_DEV_ACPI && + (*node)->header.sub_type == EFI_DEV_BASIC_ACPI) + ret = parse_acpi_path(*node, parent, &child); + else if ((*node)->header.type == EFI_DEV_HW && + (*node)->header.sub_type == EFI_DEV_PCI) + ret = parse_pci_path(*node, parent, &child); + else if (((*node)->header.type == EFI_DEV_END_PATH || + (*node)->header.type == EFI_DEV_END_PATH2)) + ret = parse_end_path(*node, parent, &child); + else + ret = -ENOTSUPP; + + put_device(parent); + if (ret < 0) + return ERR_PTR(ret); + + parent = child; + *node = (void *)*node + (*node)->header.length; + *len -= (*node)->header.length; + } + + if (ret == EFI_DEV_END_ENTIRE) + *len = 0; + + return child; +} -- cgit v1.2.3