From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/firmware/efi/mokvar-table.c | 362 ++++++++++++++++++++++++++++++++++++ 1 file changed, 362 insertions(+) create mode 100644 drivers/firmware/efi/mokvar-table.c (limited to 'drivers/firmware/efi/mokvar-table.c') diff --git a/drivers/firmware/efi/mokvar-table.c b/drivers/firmware/efi/mokvar-table.c new file mode 100644 index 000000000..5ed0602c2 --- /dev/null +++ b/drivers/firmware/efi/mokvar-table.c @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * mokvar-table.c + * + * Copyright (c) 2020 Red Hat + * Author: Lenny Szubowicz + * + * This module contains the kernel support for the Linux EFI Machine + * Owner Key (MOK) variable configuration table, which is identified by + * the LINUX_EFI_MOK_VARIABLE_TABLE_GUID. + * + * This EFI configuration table provides a more robust alternative to + * EFI volatile variables by which an EFI boot loader can pass the + * contents of the Machine Owner Key (MOK) certificate stores to the + * kernel during boot. If both the EFI MOK config table and corresponding + * EFI MOK variables are present, the table should be considered as + * more authoritative. + * + * This module includes code that validates and maps the EFI MOK table, + * if it's presence was detected very early in boot. + * + * Kernel interface routines are provided to walk through all the + * entries in the MOK config table or to search for a specific named + * entry. + * + * The contents of the individual named MOK config table entries are + * made available to user space via read-only sysfs binary files under: + * + * /sys/firmware/efi/mok-variables/ + * + */ +#define pr_fmt(fmt) "mokvar: " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +#include + +/* + * The LINUX_EFI_MOK_VARIABLE_TABLE_GUID config table is a packed + * sequence of struct efi_mokvar_table_entry, one for each named + * MOK variable. The sequence is terminated by an entry with a + * completely NULL name and 0 data size. + * + * efi_mokvar_table_size is set to the computed size of the + * MOK config table by efi_mokvar_table_init(). This will be + * non-zero if and only if the table if present and has been + * validated by efi_mokvar_table_init(). + */ +static size_t efi_mokvar_table_size; + +/* + * efi_mokvar_table_va is the kernel virtual address at which the + * EFI MOK config table has been mapped by efi_mokvar_sysfs_init(). + */ +static struct efi_mokvar_table_entry *efi_mokvar_table_va; + +/* + * Each /sys/firmware/efi/mok-variables/ sysfs file is represented by + * an instance of struct efi_mokvar_sysfs_attr on efi_mokvar_sysfs_list. + * bin_attr.private points to the associated EFI MOK config table entry. + * + * This list is created during boot and then remains unchanged. + * So no synchronization is currently required to walk the list. + */ +struct efi_mokvar_sysfs_attr { + struct bin_attribute bin_attr; + struct list_head node; +}; + +static LIST_HEAD(efi_mokvar_sysfs_list); +static struct kobject *mokvar_kobj; + +/* + * efi_mokvar_table_init() - Early boot validation of EFI MOK config table + * + * If present, validate and compute the size of the EFI MOK variable + * configuration table. This table may be provided by an EFI boot loader + * as an alternative to ordinary EFI variables, due to platform-dependent + * limitations. The memory occupied by this table is marked as reserved. + * + * This routine must be called before efi_free_boot_services() in order + * to guarantee that it can mark the table as reserved. + * + * Implicit inputs: + * efi.mokvar_table: Physical address of EFI MOK variable config table + * or special value that indicates no such table. + * + * Implicit outputs: + * efi_mokvar_table_size: Computed size of EFI MOK variable config table. + * The table is considered present and valid if this + * is non-zero. + */ +void __init efi_mokvar_table_init(void) +{ + efi_memory_desc_t md; + void *va = NULL; + unsigned long cur_offset = 0; + unsigned long offset_limit; + unsigned long map_size = 0; + unsigned long map_size_needed = 0; + unsigned long size; + struct efi_mokvar_table_entry *mokvar_entry; + int err; + + if (!efi_enabled(EFI_MEMMAP)) + return; + + if (efi.mokvar_table == EFI_INVALID_TABLE_ADDR) + return; + /* + * The EFI MOK config table must fit within a single EFI memory + * descriptor range. + */ + err = efi_mem_desc_lookup(efi.mokvar_table, &md); + if (err) { + pr_warn("EFI MOKvar config table is not within the EFI memory map\n"); + return; + } + + offset_limit = efi_mem_desc_end(&md) - efi.mokvar_table; + + /* + * Validate the MOK config table. Since there is no table header + * from which we could get the total size of the MOK config table, + * we compute the total size as we validate each variably sized + * entry, remapping as necessary. + */ + err = -EINVAL; + while (cur_offset + sizeof(*mokvar_entry) <= offset_limit) { + mokvar_entry = va + cur_offset; + map_size_needed = cur_offset + sizeof(*mokvar_entry); + if (map_size_needed > map_size) { + if (va) + early_memunmap(va, map_size); + /* + * Map a little more than the fixed size entry + * header, anticipating some data. It's safe to + * do so as long as we stay within current memory + * descriptor. + */ + map_size = min(map_size_needed + 2*EFI_PAGE_SIZE, + offset_limit); + va = early_memremap(efi.mokvar_table, map_size); + if (!va) { + pr_err("Failed to map EFI MOKvar config table pa=0x%lx, size=%lu.\n", + efi.mokvar_table, map_size); + return; + } + mokvar_entry = va + cur_offset; + } + + /* Check for last sentinel entry */ + if (mokvar_entry->name[0] == '\0') { + if (mokvar_entry->data_size != 0) + break; + err = 0; + break; + } + + /* Sanity check that the name is null terminated */ + size = strnlen(mokvar_entry->name, + sizeof(mokvar_entry->name)); + if (size >= sizeof(mokvar_entry->name)) + break; + + /* Advance to the next entry */ + cur_offset = map_size_needed + mokvar_entry->data_size; + } + + if (va) + early_memunmap(va, map_size); + if (err) { + pr_err("EFI MOKvar config table is not valid\n"); + return; + } + + if (md.type == EFI_BOOT_SERVICES_DATA) + efi_mem_reserve(efi.mokvar_table, map_size_needed); + + efi_mokvar_table_size = map_size_needed; +} + +/* + * efi_mokvar_entry_next() - Get next entry in the EFI MOK config table + * + * mokvar_entry: Pointer to current EFI MOK config table entry + * or null. Null indicates get first entry. + * Passed by reference. This is updated to the + * same value as the return value. + * + * Returns: Pointer to next EFI MOK config table entry + * or null, if there are no more entries. + * Same value is returned in the mokvar_entry + * parameter. + * + * This routine depends on the EFI MOK config table being entirely + * mapped with it's starting virtual address in efi_mokvar_table_va. + */ +struct efi_mokvar_table_entry *efi_mokvar_entry_next( + struct efi_mokvar_table_entry **mokvar_entry) +{ + struct efi_mokvar_table_entry *mokvar_cur; + struct efi_mokvar_table_entry *mokvar_next; + size_t size_cur; + + mokvar_cur = *mokvar_entry; + *mokvar_entry = NULL; + + if (efi_mokvar_table_va == NULL) + return NULL; + + if (mokvar_cur == NULL) { + mokvar_next = efi_mokvar_table_va; + } else { + if (mokvar_cur->name[0] == '\0') + return NULL; + size_cur = sizeof(*mokvar_cur) + mokvar_cur->data_size; + mokvar_next = (void *)mokvar_cur + size_cur; + } + + if (mokvar_next->name[0] == '\0') + return NULL; + + *mokvar_entry = mokvar_next; + return mokvar_next; +} + +/* + * efi_mokvar_entry_find() - Find EFI MOK config entry by name + * + * name: Name of the entry to look for. + * + * Returns: Pointer to EFI MOK config table entry if found; + * null otherwise. + * + * This routine depends on the EFI MOK config table being entirely + * mapped with it's starting virtual address in efi_mokvar_table_va. + */ +struct efi_mokvar_table_entry *efi_mokvar_entry_find(const char *name) +{ + struct efi_mokvar_table_entry *mokvar_entry = NULL; + + while (efi_mokvar_entry_next(&mokvar_entry)) { + if (!strncmp(name, mokvar_entry->name, + sizeof(mokvar_entry->name))) + return mokvar_entry; + } + return NULL; +} + +/* + * efi_mokvar_sysfs_read() - sysfs binary file read routine + * + * Returns: Count of bytes read. + * + * Copy EFI MOK config table entry data for this mokvar sysfs binary file + * to the supplied buffer, starting at the specified offset into mokvar table + * entry data, for the specified count bytes. The copy is limited by the + * amount of data in this mokvar config table entry. + */ +static ssize_t efi_mokvar_sysfs_read(struct file *file, struct kobject *kobj, + struct bin_attribute *bin_attr, char *buf, + loff_t off, size_t count) +{ + struct efi_mokvar_table_entry *mokvar_entry = bin_attr->private; + + if (!capable(CAP_SYS_ADMIN)) + return 0; + + if (off >= mokvar_entry->data_size) + return 0; + if (count > mokvar_entry->data_size - off) + count = mokvar_entry->data_size - off; + + memcpy(buf, mokvar_entry->data + off, count); + return count; +} + +/* + * efi_mokvar_sysfs_init() - Map EFI MOK config table and create sysfs + * + * Map the EFI MOK variable config table for run-time use by the kernel + * and create the sysfs entries in /sys/firmware/efi/mok-variables/ + * + * This routine just returns if a valid EFI MOK variable config table + * was not found earlier during boot. + * + * This routine must be called during a "middle" initcall phase, i.e. + * after efi_mokvar_table_init() but before UEFI certs are loaded + * during late init. + * + * Implicit inputs: + * efi.mokvar_table: Physical address of EFI MOK variable config table + * or special value that indicates no such table. + * + * efi_mokvar_table_size: Computed size of EFI MOK variable config table. + * The table is considered present and valid if this + * is non-zero. + * + * Implicit outputs: + * efi_mokvar_table_va: Start virtual address of the EFI MOK config table. + */ +static int __init efi_mokvar_sysfs_init(void) +{ + void *config_va; + struct efi_mokvar_table_entry *mokvar_entry = NULL; + struct efi_mokvar_sysfs_attr *mokvar_sysfs = NULL; + int err = 0; + + if (efi_mokvar_table_size == 0) + return -ENOENT; + + config_va = memremap(efi.mokvar_table, efi_mokvar_table_size, + MEMREMAP_WB); + if (!config_va) { + pr_err("Failed to map EFI MOKvar config table\n"); + return -ENOMEM; + } + efi_mokvar_table_va = config_va; + + mokvar_kobj = kobject_create_and_add("mok-variables", efi_kobj); + if (!mokvar_kobj) { + pr_err("Failed to create EFI mok-variables sysfs entry\n"); + return -ENOMEM; + } + + while (efi_mokvar_entry_next(&mokvar_entry)) { + mokvar_sysfs = kzalloc(sizeof(*mokvar_sysfs), GFP_KERNEL); + if (!mokvar_sysfs) { + err = -ENOMEM; + break; + } + + sysfs_bin_attr_init(&mokvar_sysfs->bin_attr); + mokvar_sysfs->bin_attr.private = mokvar_entry; + mokvar_sysfs->bin_attr.attr.name = mokvar_entry->name; + mokvar_sysfs->bin_attr.attr.mode = 0400; + mokvar_sysfs->bin_attr.size = mokvar_entry->data_size; + mokvar_sysfs->bin_attr.read = efi_mokvar_sysfs_read; + + err = sysfs_create_bin_file(mokvar_kobj, + &mokvar_sysfs->bin_attr); + if (err) + break; + + list_add_tail(&mokvar_sysfs->node, &efi_mokvar_sysfs_list); + } + + if (err) { + pr_err("Failed to create some EFI mok-variables sysfs entries\n"); + kfree(mokvar_sysfs); + } + return err; +} +fs_initcall(efi_mokvar_sysfs_init); -- cgit v1.2.3