From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/firmware/imx/scu-pd.c | 424 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 424 insertions(+) create mode 100644 drivers/firmware/imx/scu-pd.c (limited to 'drivers/firmware/imx/scu-pd.c') diff --git a/drivers/firmware/imx/scu-pd.c b/drivers/firmware/imx/scu-pd.c new file mode 100644 index 000000000..2a4f07423 --- /dev/null +++ b/drivers/firmware/imx/scu-pd.c @@ -0,0 +1,424 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2016 Freescale Semiconductor, Inc. + * Copyright 2017-2018 NXP + * Dong Aisheng + * + * Implementation of the SCU based Power Domains + * + * NOTE: a better implementation suggested by Ulf Hansson is using a + * single global power domain and implement the ->attach|detach_dev() + * callback for the genpd and use the regular of_genpd_add_provider_simple(). + * From within the ->attach_dev(), we could get the OF node for + * the device that is being attached and then parse the power-domain + * cell containing the "resource id" and store that in the per device + * struct generic_pm_domain_data (we have void pointer there for + * storing these kind of things). + * + * Additionally, we need to implement the ->stop() and ->start() + * callbacks of genpd, which is where you "power on/off" devices, + * rather than using the above ->power_on|off() callbacks. + * + * However, there're two known issues: + * 1. The ->attach_dev() of power domain infrastructure still does + * not support multi domains case as the struct device *dev passed + * in is a virtual PD device, it does not help for parsing the real + * device resource id from device tree, so it's unware of which + * real sub power domain of device should be attached. + * + * The framework needs some proper extension to support multi power + * domain cases. + * + * Update: Genpd assigns the ->of_node for the virtual device before it + * invokes ->attach_dev() callback, hence parsing for device resources via + * DT should work fine. + * + * 2. It also breaks most of current drivers as the driver probe sequence + * behavior changed if removing ->power_on|off() callback and use + * ->start() and ->stop() instead. genpd_dev_pm_attach will only power + * up the domain and attach device, but will not call .start() which + * relies on device runtime pm. That means the device power is still + * not up before running driver probe function. For SCU enabled + * platforms, all device drivers accessing registers/clock without power + * domain enabled will trigger a HW access error. That means we need fix + * most drivers probe sequence with proper runtime pm. + * + * Update: Runtime PM support isn't necessary. Instead, this can easily be + * fixed in drivers by adding a call to dev_pm_domain_start() during probe. + * + * In summary, the second part needs to be addressed via minor updates to the + * relevant drivers, before the "single global power domain" model can be used. + * + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* SCU Power Mode Protocol definition */ +struct imx_sc_msg_req_set_resource_power_mode { + struct imx_sc_rpc_msg hdr; + u16 resource; + u8 mode; +} __packed __aligned(4); + +#define IMX_SCU_PD_NAME_SIZE 20 +struct imx_sc_pm_domain { + struct generic_pm_domain pd; + char name[IMX_SCU_PD_NAME_SIZE]; + u32 rsrc; +}; + +struct imx_sc_pd_range { + char *name; + u32 rsrc; + u8 num; + + /* add domain index */ + bool postfix; + u8 start_from; +}; + +struct imx_sc_pd_soc { + const struct imx_sc_pd_range *pd_ranges; + u8 num_ranges; +}; + +static int imx_con_rsrc; + +static const struct imx_sc_pd_range imx8qxp_scu_pd_ranges[] = { + /* LSIO SS */ + { "pwm", IMX_SC_R_PWM_0, 8, true, 0 }, + { "gpio", IMX_SC_R_GPIO_0, 8, true, 0 }, + { "gpt", IMX_SC_R_GPT_0, 5, true, 0 }, + { "kpp", IMX_SC_R_KPP, 1, false, 0 }, + { "fspi", IMX_SC_R_FSPI_0, 2, true, 0 }, + { "mu_a", IMX_SC_R_MU_0A, 14, true, 0 }, + { "mu_b", IMX_SC_R_MU_5B, 9, true, 5 }, + + /* CONN SS */ + { "usb", IMX_SC_R_USB_0, 2, true, 0 }, + { "usb0phy", IMX_SC_R_USB_0_PHY, 1, false, 0 }, + { "usb1phy", IMX_SC_R_USB_1_PHY, 1, false, 0}, + { "usb2", IMX_SC_R_USB_2, 1, false, 0 }, + { "usb2phy", IMX_SC_R_USB_2_PHY, 1, false, 0 }, + { "sdhc", IMX_SC_R_SDHC_0, 3, true, 0 }, + { "enet", IMX_SC_R_ENET_0, 2, true, 0 }, + { "nand", IMX_SC_R_NAND, 1, false, 0 }, + { "mlb", IMX_SC_R_MLB_0, 1, true, 0 }, + + /* AUDIO SS */ + { "audio-pll0", IMX_SC_R_AUDIO_PLL_0, 1, false, 0 }, + { "audio-pll1", IMX_SC_R_AUDIO_PLL_1, 1, false, 0 }, + { "audio-clk-0", IMX_SC_R_AUDIO_CLK_0, 1, false, 0 }, + { "audio-clk-1", IMX_SC_R_AUDIO_CLK_1, 1, false, 0 }, + { "dma0-ch", IMX_SC_R_DMA_0_CH0, 16, true, 0 }, + { "dma1-ch", IMX_SC_R_DMA_1_CH0, 16, true, 0 }, + { "dma2-ch", IMX_SC_R_DMA_2_CH0, 5, true, 0 }, + { "asrc0", IMX_SC_R_ASRC_0, 1, false, 0 }, + { "asrc1", IMX_SC_R_ASRC_1, 1, false, 0 }, + { "esai0", IMX_SC_R_ESAI_0, 1, false, 0 }, + { "spdif0", IMX_SC_R_SPDIF_0, 1, false, 0 }, + { "spdif1", IMX_SC_R_SPDIF_1, 1, false, 0 }, + { "sai", IMX_SC_R_SAI_0, 3, true, 0 }, + { "sai3", IMX_SC_R_SAI_3, 1, false, 0 }, + { "sai4", IMX_SC_R_SAI_4, 1, false, 0 }, + { "sai5", IMX_SC_R_SAI_5, 1, false, 0 }, + { "sai6", IMX_SC_R_SAI_6, 1, false, 0 }, + { "sai7", IMX_SC_R_SAI_7, 1, false, 0 }, + { "amix", IMX_SC_R_AMIX, 1, false, 0 }, + { "mqs0", IMX_SC_R_MQS_0, 1, false, 0 }, + { "dsp", IMX_SC_R_DSP, 1, false, 0 }, + { "dsp-ram", IMX_SC_R_DSP_RAM, 1, false, 0 }, + + /* DMA SS */ + { "can", IMX_SC_R_CAN_0, 3, true, 0 }, + { "ftm", IMX_SC_R_FTM_0, 2, true, 0 }, + { "lpi2c", IMX_SC_R_I2C_0, 4, true, 0 }, + { "adc", IMX_SC_R_ADC_0, 2, true, 0 }, + { "lcd", IMX_SC_R_LCD_0, 1, true, 0 }, + { "lcd0-pwm", IMX_SC_R_LCD_0_PWM_0, 1, true, 0 }, + { "lpuart", IMX_SC_R_UART_0, 4, true, 0 }, + { "lpspi", IMX_SC_R_SPI_0, 4, true, 0 }, + { "irqstr_dsp", IMX_SC_R_IRQSTR_DSP, 1, false, 0 }, + + /* VPU SS */ + { "vpu", IMX_SC_R_VPU, 1, false, 0 }, + { "vpu-pid", IMX_SC_R_VPU_PID0, 8, true, 0 }, + { "vpu-dec0", IMX_SC_R_VPU_DEC_0, 1, false, 0 }, + { "vpu-enc0", IMX_SC_R_VPU_ENC_0, 1, false, 0 }, + { "vpu-enc1", IMX_SC_R_VPU_ENC_1, 1, false, 0 }, + { "vpu-mu0", IMX_SC_R_VPU_MU_0, 1, false, 0 }, + { "vpu-mu1", IMX_SC_R_VPU_MU_1, 1, false, 0 }, + { "vpu-mu2", IMX_SC_R_VPU_MU_2, 1, false, 0 }, + + /* GPU SS */ + { "gpu0-pid", IMX_SC_R_GPU_0_PID0, 4, true, 0 }, + + /* HSIO SS */ + { "pcie-b", IMX_SC_R_PCIE_B, 1, false, 0 }, + { "serdes-1", IMX_SC_R_SERDES_1, 1, false, 0 }, + { "hsio-gpio", IMX_SC_R_HSIO_GPIO, 1, false, 0 }, + + /* MIPI SS */ + { "mipi0", IMX_SC_R_MIPI_0, 1, false, 0 }, + { "mipi0-pwm0", IMX_SC_R_MIPI_0_PWM_0, 1, false, 0 }, + { "mipi0-i2c", IMX_SC_R_MIPI_0_I2C_0, 2, true, 0 }, + + { "mipi1", IMX_SC_R_MIPI_1, 1, false, 0 }, + { "mipi1-pwm0", IMX_SC_R_MIPI_1_PWM_0, 1, false, 0 }, + { "mipi1-i2c", IMX_SC_R_MIPI_1_I2C_0, 2, true, 0 }, + + /* LVDS SS */ + { "lvds0", IMX_SC_R_LVDS_0, 1, false, 0 }, + { "lvds1", IMX_SC_R_LVDS_1, 1, false, 0 }, + + /* DC SS */ + { "dc0", IMX_SC_R_DC_0, 1, false, 0 }, + { "dc0-pll", IMX_SC_R_DC_0_PLL_0, 2, true, 0 }, + { "dc0-video", IMX_SC_R_DC_0_VIDEO0, 2, true, 0 }, + + /* CM40 SS */ + { "cm40-i2c", IMX_SC_R_M4_0_I2C, 1, false, 0 }, + { "cm40-intmux", IMX_SC_R_M4_0_INTMUX, 1, false, 0 }, + { "cm40-pid", IMX_SC_R_M4_0_PID0, 5, true, 0}, + { "cm40-mu-a1", IMX_SC_R_M4_0_MU_1A, 1, false, 0}, + { "cm40-lpuart", IMX_SC_R_M4_0_UART, 1, false, 0}, + + /* CM41 SS */ + { "cm41-i2c", IMX_SC_R_M4_1_I2C, 1, false, 0 }, + { "cm41-intmux", IMX_SC_R_M4_1_INTMUX, 1, false, 0 }, + { "cm41-pid", IMX_SC_R_M4_1_PID0, 5, true, 0}, + { "cm41-mu-a1", IMX_SC_R_M4_1_MU_1A, 1, false, 0}, + { "cm41-lpuart", IMX_SC_R_M4_1_UART, 1, false, 0}, + + /* IMAGE SS */ + { "img-jpegdec-mp", IMX_SC_R_MJPEG_DEC_MP, 1, false, 0 }, + { "img-jpegdec-s0", IMX_SC_R_MJPEG_DEC_S0, 4, true, 0 }, + { "img-jpegenc-mp", IMX_SC_R_MJPEG_ENC_MP, 1, false, 0 }, + { "img-jpegenc-s0", IMX_SC_R_MJPEG_ENC_S0, 4, true, 0 }, +}; + +static const struct imx_sc_pd_soc imx8qxp_scu_pd = { + .pd_ranges = imx8qxp_scu_pd_ranges, + .num_ranges = ARRAY_SIZE(imx8qxp_scu_pd_ranges), +}; + +static struct imx_sc_ipc *pm_ipc_handle; + +static inline struct imx_sc_pm_domain * +to_imx_sc_pd(struct generic_pm_domain *genpd) +{ + return container_of(genpd, struct imx_sc_pm_domain, pd); +} + +static void imx_sc_pd_get_console_rsrc(void) +{ + struct of_phandle_args specs; + int ret; + + if (!of_stdout) + return; + + ret = of_parse_phandle_with_args(of_stdout, "power-domains", + "#power-domain-cells", + 0, &specs); + if (ret) + return; + + imx_con_rsrc = specs.args[0]; +} + +static int imx_sc_pd_power(struct generic_pm_domain *domain, bool power_on) +{ + struct imx_sc_msg_req_set_resource_power_mode msg; + struct imx_sc_rpc_msg *hdr = &msg.hdr; + struct imx_sc_pm_domain *pd; + int ret; + + pd = to_imx_sc_pd(domain); + + hdr->ver = IMX_SC_RPC_VERSION; + hdr->svc = IMX_SC_RPC_SVC_PM; + hdr->func = IMX_SC_PM_FUNC_SET_RESOURCE_POWER_MODE; + hdr->size = 2; + + msg.resource = pd->rsrc; + msg.mode = power_on ? IMX_SC_PM_PW_MODE_ON : IMX_SC_PM_PW_MODE_LP; + + ret = imx_scu_call_rpc(pm_ipc_handle, &msg, true); + if (ret) + dev_err(&domain->dev, "failed to power %s resource %d ret %d\n", + power_on ? "up" : "off", pd->rsrc, ret); + + return ret; +} + +static int imx_sc_pd_power_on(struct generic_pm_domain *domain) +{ + return imx_sc_pd_power(domain, true); +} + +static int imx_sc_pd_power_off(struct generic_pm_domain *domain) +{ + return imx_sc_pd_power(domain, false); +} + +static struct generic_pm_domain *imx_scu_pd_xlate(struct of_phandle_args *spec, + void *data) +{ + struct generic_pm_domain *domain = ERR_PTR(-ENOENT); + struct genpd_onecell_data *pd_data = data; + unsigned int i; + + for (i = 0; i < pd_data->num_domains; i++) { + struct imx_sc_pm_domain *sc_pd; + + sc_pd = to_imx_sc_pd(pd_data->domains[i]); + if (sc_pd->rsrc == spec->args[0]) { + domain = &sc_pd->pd; + break; + } + } + + return domain; +} + +static struct imx_sc_pm_domain * +imx_scu_add_pm_domain(struct device *dev, int idx, + const struct imx_sc_pd_range *pd_ranges) +{ + struct imx_sc_pm_domain *sc_pd; + bool is_off = true; + int ret; + + if (!imx_sc_rm_is_resource_owned(pm_ipc_handle, pd_ranges->rsrc + idx)) + return NULL; + + sc_pd = devm_kzalloc(dev, sizeof(*sc_pd), GFP_KERNEL); + if (!sc_pd) + return ERR_PTR(-ENOMEM); + + sc_pd->rsrc = pd_ranges->rsrc + idx; + sc_pd->pd.power_off = imx_sc_pd_power_off; + sc_pd->pd.power_on = imx_sc_pd_power_on; + + if (pd_ranges->postfix) + snprintf(sc_pd->name, sizeof(sc_pd->name), + "%s%i", pd_ranges->name, pd_ranges->start_from + idx); + else + snprintf(sc_pd->name, sizeof(sc_pd->name), + "%s", pd_ranges->name); + + sc_pd->pd.name = sc_pd->name; + if (imx_con_rsrc == sc_pd->rsrc) { + sc_pd->pd.flags = GENPD_FLAG_RPM_ALWAYS_ON; + is_off = false; + } + + if (sc_pd->rsrc >= IMX_SC_R_LAST) { + dev_warn(dev, "invalid pd %s rsrc id %d found", + sc_pd->name, sc_pd->rsrc); + + devm_kfree(dev, sc_pd); + return NULL; + } + + ret = pm_genpd_init(&sc_pd->pd, NULL, is_off); + if (ret) { + dev_warn(dev, "failed to init pd %s rsrc id %d", + sc_pd->name, sc_pd->rsrc); + devm_kfree(dev, sc_pd); + return NULL; + } + + return sc_pd; +} + +static int imx_scu_init_pm_domains(struct device *dev, + const struct imx_sc_pd_soc *pd_soc) +{ + const struct imx_sc_pd_range *pd_ranges = pd_soc->pd_ranges; + struct generic_pm_domain **domains; + struct genpd_onecell_data *pd_data; + struct imx_sc_pm_domain *sc_pd; + u32 count = 0; + int i, j; + + for (i = 0; i < pd_soc->num_ranges; i++) + count += pd_ranges[i].num; + + domains = devm_kcalloc(dev, count, sizeof(*domains), GFP_KERNEL); + if (!domains) + return -ENOMEM; + + pd_data = devm_kzalloc(dev, sizeof(*pd_data), GFP_KERNEL); + if (!pd_data) + return -ENOMEM; + + count = 0; + for (i = 0; i < pd_soc->num_ranges; i++) { + for (j = 0; j < pd_ranges[i].num; j++) { + sc_pd = imx_scu_add_pm_domain(dev, j, &pd_ranges[i]); + if (IS_ERR_OR_NULL(sc_pd)) + continue; + + domains[count++] = &sc_pd->pd; + dev_dbg(dev, "added power domain %s\n", sc_pd->pd.name); + } + } + + pd_data->domains = domains; + pd_data->num_domains = count; + pd_data->xlate = imx_scu_pd_xlate; + + of_genpd_add_provider_onecell(dev->of_node, pd_data); + + return 0; +} + +static int imx_sc_pd_probe(struct platform_device *pdev) +{ + const struct imx_sc_pd_soc *pd_soc; + int ret; + + ret = imx_scu_get_handle(&pm_ipc_handle); + if (ret) + return ret; + + pd_soc = of_device_get_match_data(&pdev->dev); + if (!pd_soc) + return -ENODEV; + + imx_sc_pd_get_console_rsrc(); + + return imx_scu_init_pm_domains(&pdev->dev, pd_soc); +} + +static const struct of_device_id imx_sc_pd_match[] = { + { .compatible = "fsl,imx8qxp-scu-pd", &imx8qxp_scu_pd}, + { .compatible = "fsl,scu-pd", &imx8qxp_scu_pd}, + { /* sentinel */ } +}; + +static struct platform_driver imx_sc_pd_driver = { + .driver = { + .name = "imx-scu-pd", + .of_match_table = imx_sc_pd_match, + }, + .probe = imx_sc_pd_probe, +}; +builtin_platform_driver(imx_sc_pd_driver); + +MODULE_AUTHOR("Dong Aisheng "); +MODULE_DESCRIPTION("IMX SCU Power Domain driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3