From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/firmware/stratix10-rsu.c | 720 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 720 insertions(+) create mode 100644 drivers/firmware/stratix10-rsu.c (limited to 'drivers/firmware/stratix10-rsu.c') diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-rsu.c new file mode 100644 index 000000000..e51c95f8d --- /dev/null +++ b/drivers/firmware/stratix10-rsu.c @@ -0,0 +1,720 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2018-2019, Intel Corporation + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define RSU_STATE_MASK GENMASK_ULL(31, 0) +#define RSU_VERSION_MASK GENMASK_ULL(63, 32) +#define RSU_ERROR_LOCATION_MASK GENMASK_ULL(31, 0) +#define RSU_ERROR_DETAIL_MASK GENMASK_ULL(63, 32) +#define RSU_DCMF0_MASK GENMASK_ULL(31, 0) +#define RSU_DCMF1_MASK GENMASK_ULL(63, 32) +#define RSU_DCMF2_MASK GENMASK_ULL(31, 0) +#define RSU_DCMF3_MASK GENMASK_ULL(63, 32) +#define RSU_DCMF0_STATUS_MASK GENMASK_ULL(15, 0) +#define RSU_DCMF1_STATUS_MASK GENMASK_ULL(31, 16) +#define RSU_DCMF2_STATUS_MASK GENMASK_ULL(47, 32) +#define RSU_DCMF3_STATUS_MASK GENMASK_ULL(63, 48) + +#define RSU_TIMEOUT (msecs_to_jiffies(SVC_RSU_REQUEST_TIMEOUT_MS)) + +#define INVALID_RETRY_COUNTER 0xFF +#define INVALID_DCMF_VERSION 0xFF +#define INVALID_DCMF_STATUS 0xFFFFFFFF + +typedef void (*rsu_callback)(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data); +/** + * struct stratix10_rsu_priv - rsu data structure + * @chan: pointer to the allocated service channel + * @client: active service client + * @completion: state for callback completion + * @lock: a mutex to protect callback completion state + * @status.current_image: address of image currently running in flash + * @status.fail_image: address of failed image in flash + * @status.version: the interface version number of RSU firmware + * @status.state: the state of RSU system + * @status.error_details: error code + * @status.error_location: the error offset inside the image that failed + * @dcmf_version.dcmf0: Quartus dcmf0 version + * @dcmf_version.dcmf1: Quartus dcmf1 version + * @dcmf_version.dcmf2: Quartus dcmf2 version + * @dcmf_version.dcmf3: Quartus dcmf3 version + * @dcmf_status.dcmf0: dcmf0 status + * @dcmf_status.dcmf1: dcmf1 status + * @dcmf_status.dcmf2: dcmf2 status + * @dcmf_status.dcmf3: dcmf3 status + * @retry_counter: the current image's retry counter + * @max_retry: the preset max retry value + */ +struct stratix10_rsu_priv { + struct stratix10_svc_chan *chan; + struct stratix10_svc_client client; + struct completion completion; + struct mutex lock; + struct { + unsigned long current_image; + unsigned long fail_image; + unsigned int version; + unsigned int state; + unsigned int error_details; + unsigned int error_location; + } status; + + struct { + unsigned int dcmf0; + unsigned int dcmf1; + unsigned int dcmf2; + unsigned int dcmf3; + } dcmf_version; + + struct { + unsigned int dcmf0; + unsigned int dcmf1; + unsigned int dcmf2; + unsigned int dcmf3; + } dcmf_status; + + unsigned int retry_counter; + unsigned int max_retry; +}; + +/** + * rsu_status_callback() - Status callback from Intel Service Layer + * @client: pointer to service client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for RSU status request. Status is + * only updated after a system reboot, so a get updated status call is + * made during driver probe. + */ +static void rsu_status_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + struct arm_smccc_res *res = (struct arm_smccc_res *)data->kaddr1; + + if (data->status == BIT(SVC_STATUS_OK)) { + priv->status.version = FIELD_GET(RSU_VERSION_MASK, + res->a2); + priv->status.state = FIELD_GET(RSU_STATE_MASK, res->a2); + priv->status.fail_image = res->a1; + priv->status.current_image = res->a0; + priv->status.error_location = + FIELD_GET(RSU_ERROR_LOCATION_MASK, res->a3); + priv->status.error_details = + FIELD_GET(RSU_ERROR_DETAIL_MASK, res->a3); + } else { + dev_err(client->dev, "COMMAND_RSU_STATUS returned 0x%lX\n", + res->a0); + priv->status.version = 0; + priv->status.state = 0; + priv->status.fail_image = 0; + priv->status.current_image = 0; + priv->status.error_location = 0; + priv->status.error_details = 0; + } + + complete(&priv->completion); +} + +/** + * rsu_command_callback() - Update callback from Intel Service Layer + * @client: pointer to client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for RSU commands. + */ +static void rsu_command_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + + if (data->status == BIT(SVC_STATUS_NO_SUPPORT)) + dev_warn(client->dev, "Secure FW doesn't support notify\n"); + else if (data->status == BIT(SVC_STATUS_ERROR)) + dev_err(client->dev, "Failure, returned status is %lu\n", + BIT(data->status)); + + complete(&priv->completion); +} + +/** + * rsu_retry_callback() - Callback from Intel service layer for getting + * the current image's retry counter from the firmware + * @client: pointer to client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for retry counter, which is used by + * user to know how many times the images is still allowed to reload + * itself before giving up and starting RSU fail-over flow. + */ +static void rsu_retry_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + unsigned int *counter = (unsigned int *)data->kaddr1; + + if (data->status == BIT(SVC_STATUS_OK)) + priv->retry_counter = *counter; + else if (data->status == BIT(SVC_STATUS_NO_SUPPORT)) + dev_warn(client->dev, "Secure FW doesn't support retry\n"); + else + dev_err(client->dev, "Failed to get retry counter %lu\n", + BIT(data->status)); + + complete(&priv->completion); +} + +/** + * rsu_max_retry_callback() - Callback from Intel service layer for getting + * the max retry value from the firmware + * @client: pointer to client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for max retry. + */ +static void rsu_max_retry_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + unsigned int *max_retry = (unsigned int *)data->kaddr1; + + if (data->status == BIT(SVC_STATUS_OK)) + priv->max_retry = *max_retry; + else if (data->status == BIT(SVC_STATUS_NO_SUPPORT)) + dev_warn(client->dev, "Secure FW doesn't support max retry\n"); + else + dev_err(client->dev, "Failed to get max retry %lu\n", + BIT(data->status)); + + complete(&priv->completion); +} + +/** + * rsu_dcmf_version_callback() - Callback from Intel service layer for getting + * the DCMF version + * @client: pointer to client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for DCMF version number + */ +static void rsu_dcmf_version_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + unsigned long long *value1 = (unsigned long long *)data->kaddr1; + unsigned long long *value2 = (unsigned long long *)data->kaddr2; + + if (data->status == BIT(SVC_STATUS_OK)) { + priv->dcmf_version.dcmf0 = FIELD_GET(RSU_DCMF0_MASK, *value1); + priv->dcmf_version.dcmf1 = FIELD_GET(RSU_DCMF1_MASK, *value1); + priv->dcmf_version.dcmf2 = FIELD_GET(RSU_DCMF2_MASK, *value2); + priv->dcmf_version.dcmf3 = FIELD_GET(RSU_DCMF3_MASK, *value2); + } else + dev_err(client->dev, "failed to get DCMF version\n"); + + complete(&priv->completion); +} + +/** + * rsu_dcmf_status_callback() - Callback from Intel service layer for getting + * the DCMF status + * @client: pointer to client + * @data: pointer to callback data structure + * + * Callback from Intel service layer for DCMF status + */ +static void rsu_dcmf_status_callback(struct stratix10_svc_client *client, + struct stratix10_svc_cb_data *data) +{ + struct stratix10_rsu_priv *priv = client->priv; + unsigned long long *value = (unsigned long long *)data->kaddr1; + + if (data->status == BIT(SVC_STATUS_OK)) { + priv->dcmf_status.dcmf0 = FIELD_GET(RSU_DCMF0_STATUS_MASK, + *value); + priv->dcmf_status.dcmf1 = FIELD_GET(RSU_DCMF1_STATUS_MASK, + *value); + priv->dcmf_status.dcmf2 = FIELD_GET(RSU_DCMF2_STATUS_MASK, + *value); + priv->dcmf_status.dcmf3 = FIELD_GET(RSU_DCMF3_STATUS_MASK, + *value); + } else + dev_err(client->dev, "failed to get DCMF status\n"); + + complete(&priv->completion); +} + +/** + * rsu_send_msg() - send a message to Intel service layer + * @priv: pointer to rsu private data + * @command: RSU status or update command + * @arg: the request argument, the bitstream address or notify status + * @callback: function pointer for the callback (status or update) + * + * Start an Intel service layer transaction to perform the SMC call that + * is necessary to get RSU boot log or set the address of bitstream to + * boot after reboot. + * + * Returns 0 on success or -ETIMEDOUT on error. + */ +static int rsu_send_msg(struct stratix10_rsu_priv *priv, + enum stratix10_svc_command_code command, + unsigned long arg, + rsu_callback callback) +{ + struct stratix10_svc_client_msg msg; + int ret; + + mutex_lock(&priv->lock); + reinit_completion(&priv->completion); + priv->client.receive_cb = callback; + + msg.command = command; + if (arg) + msg.arg[0] = arg; + + ret = stratix10_svc_send(priv->chan, &msg); + if (ret < 0) + goto status_done; + + ret = wait_for_completion_interruptible_timeout(&priv->completion, + RSU_TIMEOUT); + if (!ret) { + dev_err(priv->client.dev, + "timeout waiting for SMC call\n"); + ret = -ETIMEDOUT; + goto status_done; + } else if (ret < 0) { + dev_err(priv->client.dev, + "error %d waiting for SMC call\n", ret); + goto status_done; + } else { + ret = 0; + } + +status_done: + stratix10_svc_done(priv->chan); + mutex_unlock(&priv->lock); + return ret; +} + +/* + * This driver exposes some optional features of the Intel Stratix 10 SoC FPGA. + * The sysfs interfaces exposed here are FPGA Remote System Update (RSU) + * related. They allow user space software to query the configuration system + * status and to request optional reboot behavior specific to Intel FPGAs. + */ + +static ssize_t current_image_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08lx\n", priv->status.current_image); +} + +static ssize_t fail_image_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08lx\n", priv->status.fail_image); +} + +static ssize_t version_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->status.version); +} + +static ssize_t state_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->status.state); +} + +static ssize_t error_location_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->status.error_location); +} + +static ssize_t error_details_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->status.error_details); +} + +static ssize_t retry_counter_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->retry_counter); +} + +static ssize_t max_retry_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return scnprintf(buf, sizeof(priv->max_retry), + "0x%08x\n", priv->max_retry); +} + +static ssize_t dcmf0_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf0); +} + +static ssize_t dcmf1_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf1); +} + +static ssize_t dcmf2_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf2); +} + +static ssize_t dcmf3_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf3); +} + +static ssize_t dcmf0_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + if (priv->dcmf_status.dcmf0 == INVALID_DCMF_STATUS) + return -EIO; + + return sprintf(buf, "0x%08x\n", priv->dcmf_status.dcmf0); +} + +static ssize_t dcmf1_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + if (priv->dcmf_status.dcmf1 == INVALID_DCMF_STATUS) + return -EIO; + + return sprintf(buf, "0x%08x\n", priv->dcmf_status.dcmf1); +} + +static ssize_t dcmf2_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + if (priv->dcmf_status.dcmf2 == INVALID_DCMF_STATUS) + return -EIO; + + return sprintf(buf, "0x%08x\n", priv->dcmf_status.dcmf2); +} + +static ssize_t dcmf3_status_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + + if (!priv) + return -ENODEV; + + if (priv->dcmf_status.dcmf3 == INVALID_DCMF_STATUS) + return -EIO; + + return sprintf(buf, "0x%08x\n", priv->dcmf_status.dcmf3); +} +static ssize_t reboot_image_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + unsigned long address; + int ret; + + if (!priv) + return -ENODEV; + + ret = kstrtoul(buf, 0, &address); + if (ret) + return ret; + + ret = rsu_send_msg(priv, COMMAND_RSU_UPDATE, + address, rsu_command_callback); + if (ret) { + dev_err(dev, "Error, RSU update returned %i\n", ret); + return ret; + } + + return count; +} + +static ssize_t notify_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct stratix10_rsu_priv *priv = dev_get_drvdata(dev); + unsigned long status; + int ret; + + if (!priv) + return -ENODEV; + + ret = kstrtoul(buf, 0, &status); + if (ret) + return ret; + + ret = rsu_send_msg(priv, COMMAND_RSU_NOTIFY, + status, rsu_command_callback); + if (ret) { + dev_err(dev, "Error, RSU notify returned %i\n", ret); + return ret; + } + + /* to get the updated state */ + ret = rsu_send_msg(priv, COMMAND_RSU_STATUS, + 0, rsu_status_callback); + if (ret) { + dev_err(dev, "Error, getting RSU status %i\n", ret); + return ret; + } + + ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0, rsu_retry_callback); + if (ret) { + dev_err(dev, "Error, getting RSU retry %i\n", ret); + return ret; + } + + return count; +} + +static DEVICE_ATTR_RO(current_image); +static DEVICE_ATTR_RO(fail_image); +static DEVICE_ATTR_RO(state); +static DEVICE_ATTR_RO(version); +static DEVICE_ATTR_RO(error_location); +static DEVICE_ATTR_RO(error_details); +static DEVICE_ATTR_RO(retry_counter); +static DEVICE_ATTR_RO(max_retry); +static DEVICE_ATTR_RO(dcmf0); +static DEVICE_ATTR_RO(dcmf1); +static DEVICE_ATTR_RO(dcmf2); +static DEVICE_ATTR_RO(dcmf3); +static DEVICE_ATTR_RO(dcmf0_status); +static DEVICE_ATTR_RO(dcmf1_status); +static DEVICE_ATTR_RO(dcmf2_status); +static DEVICE_ATTR_RO(dcmf3_status); +static DEVICE_ATTR_WO(reboot_image); +static DEVICE_ATTR_WO(notify); + +static struct attribute *rsu_attrs[] = { + &dev_attr_current_image.attr, + &dev_attr_fail_image.attr, + &dev_attr_state.attr, + &dev_attr_version.attr, + &dev_attr_error_location.attr, + &dev_attr_error_details.attr, + &dev_attr_retry_counter.attr, + &dev_attr_max_retry.attr, + &dev_attr_dcmf0.attr, + &dev_attr_dcmf1.attr, + &dev_attr_dcmf2.attr, + &dev_attr_dcmf3.attr, + &dev_attr_dcmf0_status.attr, + &dev_attr_dcmf1_status.attr, + &dev_attr_dcmf2_status.attr, + &dev_attr_dcmf3_status.attr, + &dev_attr_reboot_image.attr, + &dev_attr_notify.attr, + NULL +}; + +ATTRIBUTE_GROUPS(rsu); + +static int stratix10_rsu_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct stratix10_rsu_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->client.dev = dev; + priv->client.receive_cb = NULL; + priv->client.priv = priv; + priv->status.current_image = 0; + priv->status.fail_image = 0; + priv->status.error_location = 0; + priv->status.error_details = 0; + priv->status.version = 0; + priv->status.state = 0; + priv->retry_counter = INVALID_RETRY_COUNTER; + priv->dcmf_version.dcmf0 = INVALID_DCMF_VERSION; + priv->dcmf_version.dcmf1 = INVALID_DCMF_VERSION; + priv->dcmf_version.dcmf2 = INVALID_DCMF_VERSION; + priv->dcmf_version.dcmf3 = INVALID_DCMF_VERSION; + priv->max_retry = INVALID_RETRY_COUNTER; + priv->dcmf_status.dcmf0 = INVALID_DCMF_STATUS; + priv->dcmf_status.dcmf1 = INVALID_DCMF_STATUS; + priv->dcmf_status.dcmf2 = INVALID_DCMF_STATUS; + priv->dcmf_status.dcmf3 = INVALID_DCMF_STATUS; + + mutex_init(&priv->lock); + priv->chan = stratix10_svc_request_channel_byname(&priv->client, + SVC_CLIENT_RSU); + if (IS_ERR(priv->chan)) { + dev_err(dev, "couldn't get service channel %s\n", + SVC_CLIENT_RSU); + return PTR_ERR(priv->chan); + } + + init_completion(&priv->completion); + platform_set_drvdata(pdev, priv); + + /* get the initial state from firmware */ + ret = rsu_send_msg(priv, COMMAND_RSU_STATUS, + 0, rsu_status_callback); + if (ret) { + dev_err(dev, "Error, getting RSU status %i\n", ret); + stratix10_svc_free_channel(priv->chan); + } + + /* get DCMF version from firmware */ + ret = rsu_send_msg(priv, COMMAND_RSU_DCMF_VERSION, + 0, rsu_dcmf_version_callback); + if (ret) { + dev_err(dev, "Error, getting DCMF version %i\n", ret); + stratix10_svc_free_channel(priv->chan); + } + + ret = rsu_send_msg(priv, COMMAND_RSU_DCMF_STATUS, + 0, rsu_dcmf_status_callback); + if (ret) { + dev_err(dev, "Error, getting DCMF status %i\n", ret); + stratix10_svc_free_channel(priv->chan); + } + + ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0, rsu_retry_callback); + if (ret) { + dev_err(dev, "Error, getting RSU retry %i\n", ret); + stratix10_svc_free_channel(priv->chan); + } + + ret = rsu_send_msg(priv, COMMAND_RSU_MAX_RETRY, 0, + rsu_max_retry_callback); + if (ret) { + dev_err(dev, "Error, getting RSU max retry %i\n", ret); + stratix10_svc_free_channel(priv->chan); + } + + return ret; +} + +static int stratix10_rsu_remove(struct platform_device *pdev) +{ + struct stratix10_rsu_priv *priv = platform_get_drvdata(pdev); + + stratix10_svc_free_channel(priv->chan); + return 0; +} + +static struct platform_driver stratix10_rsu_driver = { + .probe = stratix10_rsu_probe, + .remove = stratix10_rsu_remove, + .driver = { + .name = "stratix10-rsu", + .dev_groups = rsu_groups, + }, +}; + +module_platform_driver(stratix10_rsu_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("Intel Remote System Update Driver"); +MODULE_AUTHOR("Richard Gong "); -- cgit v1.2.3