From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/fpga/dfl-n3000-nios.c | 588 ++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 588 insertions(+) create mode 100644 drivers/fpga/dfl-n3000-nios.c (limited to 'drivers/fpga/dfl-n3000-nios.c') diff --git a/drivers/fpga/dfl-n3000-nios.c b/drivers/fpga/dfl-n3000-nios.c new file mode 100644 index 000000000..9ddf1d1d3 --- /dev/null +++ b/drivers/fpga/dfl-n3000-nios.c @@ -0,0 +1,588 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * DFL device driver for Nios private feature on Intel PAC (Programmable + * Acceleration Card) N3000 + * + * Copyright (C) 2019-2020 Intel Corporation, Inc. + * + * Authors: + * Wu Hao + * Xu Yilun + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * N3000 Nios private feature registers, named as NIOS_SPI_XX on spec. + * NS is the abbreviation of NIOS_SPI. + */ +#define N3000_NS_PARAM 0x8 +#define N3000_NS_PARAM_SHIFT_MODE_MSK BIT_ULL(1) +#define N3000_NS_PARAM_SHIFT_MODE_MSB 0 +#define N3000_NS_PARAM_SHIFT_MODE_LSB 1 +#define N3000_NS_PARAM_DATA_WIDTH GENMASK_ULL(7, 2) +#define N3000_NS_PARAM_NUM_CS GENMASK_ULL(13, 8) +#define N3000_NS_PARAM_CLK_POL BIT_ULL(14) +#define N3000_NS_PARAM_CLK_PHASE BIT_ULL(15) +#define N3000_NS_PARAM_PERIPHERAL_ID GENMASK_ULL(47, 32) + +#define N3000_NS_CTRL 0x10 +#define N3000_NS_CTRL_WR_DATA GENMASK_ULL(31, 0) +#define N3000_NS_CTRL_ADDR GENMASK_ULL(44, 32) +#define N3000_NS_CTRL_CMD_MSK GENMASK_ULL(63, 62) +#define N3000_NS_CTRL_CMD_NOP 0 +#define N3000_NS_CTRL_CMD_RD 1 +#define N3000_NS_CTRL_CMD_WR 2 + +#define N3000_NS_STAT 0x18 +#define N3000_NS_STAT_RD_DATA GENMASK_ULL(31, 0) +#define N3000_NS_STAT_RW_VAL BIT_ULL(32) + +/* Nios handshake registers, indirect access */ +#define N3000_NIOS_INIT 0x1000 +#define N3000_NIOS_INIT_DONE BIT(0) +#define N3000_NIOS_INIT_START BIT(1) +/* Mode for retimer A, link 0, the same below */ +#define N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK GENMASK(9, 8) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK GENMASK(11, 10) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK GENMASK(13, 12) +#define N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK GENMASK(15, 14) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK GENMASK(17, 16) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK GENMASK(19, 18) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK GENMASK(21, 20) +#define N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK GENMASK(23, 22) +#define N3000_NIOS_INIT_REQ_FEC_MODE_NO 0x0 +#define N3000_NIOS_INIT_REQ_FEC_MODE_KR 0x1 +#define N3000_NIOS_INIT_REQ_FEC_MODE_RS 0x2 + +#define N3000_NIOS_FW_VERSION 0x1004 +#define N3000_NIOS_FW_VERSION_PATCH GENMASK(23, 20) +#define N3000_NIOS_FW_VERSION_MINOR GENMASK(27, 24) +#define N3000_NIOS_FW_VERSION_MAJOR GENMASK(31, 28) + +/* The retimers we use on Intel PAC N3000 is Parkvale, abbreviated to PKVL */ +#define N3000_NIOS_PKVL_A_MODE_STS 0x1020 +#define N3000_NIOS_PKVL_B_MODE_STS 0x1024 +#define N3000_NIOS_PKVL_MODE_STS_GROUP_MSK GENMASK(15, 8) +#define N3000_NIOS_PKVL_MODE_STS_GROUP_OK 0x0 +#define N3000_NIOS_PKVL_MODE_STS_ID_MSK GENMASK(7, 0) +/* When GROUP MASK field == GROUP_OK */ +#define N3000_NIOS_PKVL_MODE_ID_RESET 0x0 +#define N3000_NIOS_PKVL_MODE_ID_4X10G 0x1 +#define N3000_NIOS_PKVL_MODE_ID_4X25G 0x2 +#define N3000_NIOS_PKVL_MODE_ID_2X25G 0x3 +#define N3000_NIOS_PKVL_MODE_ID_2X25G_2X10G 0x4 +#define N3000_NIOS_PKVL_MODE_ID_1X25G 0x5 + +#define N3000_NIOS_REGBUS_RETRY_COUNT 10000 /* loop count */ + +#define N3000_NIOS_INIT_TIMEOUT 10000000 /* usec */ +#define N3000_NIOS_INIT_TIME_INTV 100000 /* usec */ + +#define N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL \ + (N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK | \ + N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_NO)) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_KR)) + +#define N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL \ + (FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_A3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B0_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B1_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B2_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS) | \ + FIELD_PREP(N3000_NIOS_INIT_REQ_FEC_MODE_B3_MSK, \ + N3000_NIOS_INIT_REQ_FEC_MODE_RS)) + +struct n3000_nios { + void __iomem *base; + struct regmap *regmap; + struct device *dev; + struct platform_device *altera_spi; +}; + +static ssize_t nios_fw_version_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int val; + int ret; + + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + return sysfs_emit(buf, "%x.%x.%x\n", + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val), + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_MINOR, val), + (u8)FIELD_GET(N3000_NIOS_FW_VERSION_PATCH, val)); +} +static DEVICE_ATTR_RO(nios_fw_version); + +#define IS_MODE_STATUS_OK(mode_stat) \ + (FIELD_GET(N3000_NIOS_PKVL_MODE_STS_GROUP_MSK, (mode_stat)) == \ + N3000_NIOS_PKVL_MODE_STS_GROUP_OK) + +#define IS_RETIMER_FEC_SUPPORTED(retimer_mode) \ + ((retimer_mode) != N3000_NIOS_PKVL_MODE_ID_RESET && \ + (retimer_mode) != N3000_NIOS_PKVL_MODE_ID_4X10G) + +static int get_retimer_mode(struct n3000_nios *nn, unsigned int mode_stat_reg, + unsigned int *retimer_mode) +{ + unsigned int val; + int ret; + + ret = regmap_read(nn->regmap, mode_stat_reg, &val); + if (ret) + return ret; + + if (!IS_MODE_STATUS_OK(val)) + return -EFAULT; + + *retimer_mode = FIELD_GET(N3000_NIOS_PKVL_MODE_STS_ID_MSK, val); + + return 0; +} + +static ssize_t retimer_A_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &mode); + if (ret) + return ret; + + return sysfs_emit(buf, "0x%x\n", mode); +} +static DEVICE_ATTR_RO(retimer_A_mode); + +static ssize_t retimer_B_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct n3000_nios *nn = dev_get_drvdata(dev); + unsigned int mode; + int ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &mode); + if (ret) + return ret; + + return sysfs_emit(buf, "0x%x\n", mode); +} +static DEVICE_ATTR_RO(retimer_B_mode); + +static ssize_t fec_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + unsigned int val, retimer_a_mode, retimer_b_mode, fec_modes; + struct n3000_nios *nn = dev_get_drvdata(dev); + int ret; + + /* FEC mode setting is not supported in early FW versions */ + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) < 3) + return sysfs_emit(buf, "not supported\n"); + + /* If no 25G links, FEC mode setting is not supported either */ + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_A_MODE_STS, &retimer_a_mode); + if (ret) + return ret; + + ret = get_retimer_mode(nn, N3000_NIOS_PKVL_B_MODE_STS, &retimer_b_mode); + if (ret) + return ret; + + if (!IS_RETIMER_FEC_SUPPORTED(retimer_a_mode) && + !IS_RETIMER_FEC_SUPPORTED(retimer_b_mode)) + return sysfs_emit(buf, "not supported\n"); + + /* get the valid FEC mode for 25G links */ + ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); + if (ret) + return ret; + + /* + * FEC mode should always be the same for all links, as we set them + * in this way. + */ + fec_modes = (val & N3000_NIOS_INIT_REQ_FEC_MODE_MSK_ALL); + if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_NO_ALL) + return sysfs_emit(buf, "no\n"); + else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_KR_ALL) + return sysfs_emit(buf, "kr\n"); + else if (fec_modes == N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL) + return sysfs_emit(buf, "rs\n"); + + return -EFAULT; +} +static DEVICE_ATTR_RO(fec_mode); + +static struct attribute *n3000_nios_attrs[] = { + &dev_attr_nios_fw_version.attr, + &dev_attr_retimer_A_mode.attr, + &dev_attr_retimer_B_mode.attr, + &dev_attr_fec_mode.attr, + NULL, +}; +ATTRIBUTE_GROUPS(n3000_nios); + +static int n3000_nios_init_done_check(struct n3000_nios *nn) +{ + unsigned int val, state_a, state_b; + struct device *dev = nn->dev; + int ret, ret2; + + /* + * The SPI is shared by the Nios core inside the FPGA, Nios will use + * this SPI master to do some one time initialization after power up, + * and then release the control to OS. The driver needs to poll on + * INIT_DONE to see when driver could take the control. + * + * Please note that after Nios firmware version 3.0.0, INIT_START is + * introduced, so driver needs to trigger START firstly and then check + * INIT_DONE. + */ + + ret = regmap_read(nn->regmap, N3000_NIOS_FW_VERSION, &val); + if (ret) + return ret; + + /* + * If Nios version register is totally uninitialized(== 0x0), then the + * Nios firmware is missing. So host could take control of SPI master + * safely, but initialization work for Nios is not done. To restore the + * card, we need to reprogram a new Nios firmware via the BMC chip on + * SPI bus. So the driver doesn't error out, it continues to create the + * spi controller device and spi_board_info for BMC. + */ + if (val == 0) { + dev_err(dev, "Nios version reg = 0x%x, skip INIT_DONE check, but the retimer may be uninitialized\n", + val); + return 0; + } + + if (FIELD_GET(N3000_NIOS_FW_VERSION_MAJOR, val) >= 3) { + /* read NIOS_INIT to check if retimer initialization is done */ + ret = regmap_read(nn->regmap, N3000_NIOS_INIT, &val); + if (ret) + return ret; + + /* check if retimers are initialized already */ + if (val & (N3000_NIOS_INIT_DONE | N3000_NIOS_INIT_START)) + goto nios_init_done; + + /* configure FEC mode per module param */ + val = N3000_NIOS_INIT_START; + + /* + * When the retimer is to be set to 10G mode, there is no FEC + * mode setting, so the REQ_FEC_MODE field will be ignored by + * Nios firmware in this case. But we should still fill the FEC + * mode field cause host could not get the retimer working mode + * until the Nios init is done. + * + * For now the driver doesn't support the retimer FEC mode + * switching per user's request. It is always set to Reed + * Solomon FEC. + * + * The driver will set the same FEC mode for all links. + */ + val |= N3000_NIOS_INIT_REQ_FEC_MODE_RS_ALL; + + ret = regmap_write(nn->regmap, N3000_NIOS_INIT, val); + if (ret) + return ret; + } + +nios_init_done: + /* polls on NIOS_INIT_DONE */ + ret = regmap_read_poll_timeout(nn->regmap, N3000_NIOS_INIT, val, + val & N3000_NIOS_INIT_DONE, + N3000_NIOS_INIT_TIME_INTV, + N3000_NIOS_INIT_TIMEOUT); + if (ret) + dev_err(dev, "NIOS_INIT_DONE %s\n", + (ret == -ETIMEDOUT) ? "timed out" : "check error"); + + ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_A_MODE_STS, &state_a); + if (ret2) + return ret2; + + ret2 = regmap_read(nn->regmap, N3000_NIOS_PKVL_B_MODE_STS, &state_b); + if (ret2) + return ret2; + + if (!ret) { + /* + * After INIT_DONE is detected, it still needs to check if the + * Nios firmware reports any error during the retimer + * configuration. + */ + if (IS_MODE_STATUS_OK(state_a) && IS_MODE_STATUS_OK(state_b)) + return 0; + + /* + * If the retimer configuration is failed, the Nios firmware + * will still release the spi controller for host to + * communicate with the BMC. It makes possible for people to + * reprogram a new Nios firmware and restore the card. So the + * driver doesn't error out, it continues to create the spi + * controller device and spi_board_info for BMC. + */ + dev_err(dev, "NIOS_INIT_DONE OK, but err on retimer init\n"); + } + + dev_err(nn->dev, "PKVL_A_MODE_STS 0x%x\n", state_a); + dev_err(nn->dev, "PKVL_B_MODE_STS 0x%x\n", state_b); + + return ret; +} + +static struct spi_board_info m10_n3000_info = { + .modalias = "m10-n3000", + .max_speed_hz = 12500000, + .bus_num = 0, + .chip_select = 0, +}; + +static int create_altera_spi_controller(struct n3000_nios *nn) +{ + struct altera_spi_platform_data pdata = { 0 }; + struct platform_device_info pdevinfo = { 0 }; + void __iomem *base = nn->base; + u64 v; + + v = readq(base + N3000_NS_PARAM); + + pdata.mode_bits = SPI_CS_HIGH; + if (FIELD_GET(N3000_NS_PARAM_CLK_POL, v)) + pdata.mode_bits |= SPI_CPOL; + if (FIELD_GET(N3000_NS_PARAM_CLK_PHASE, v)) + pdata.mode_bits |= SPI_CPHA; + + pdata.num_chipselect = FIELD_GET(N3000_NS_PARAM_NUM_CS, v); + pdata.bits_per_word_mask = + SPI_BPW_RANGE_MASK(1, FIELD_GET(N3000_NS_PARAM_DATA_WIDTH, v)); + + pdata.num_devices = 1; + pdata.devices = &m10_n3000_info; + + dev_dbg(nn->dev, "%s cs %u bpm 0x%x mode 0x%x\n", __func__, + pdata.num_chipselect, pdata.bits_per_word_mask, + pdata.mode_bits); + + pdevinfo.name = "subdev_spi_altera"; + pdevinfo.id = PLATFORM_DEVID_AUTO; + pdevinfo.parent = nn->dev; + pdevinfo.data = &pdata; + pdevinfo.size_data = sizeof(pdata); + + nn->altera_spi = platform_device_register_full(&pdevinfo); + return PTR_ERR_OR_ZERO(nn->altera_spi); +} + +static void destroy_altera_spi_controller(struct n3000_nios *nn) +{ + platform_device_unregister(nn->altera_spi); +} + +static int n3000_nios_poll_stat_timeout(void __iomem *base, u64 *v) +{ + int loops; + + /* + * We don't use the time based timeout here for performance. + * + * The regbus read/write is on the critical path of Intel PAC N3000 + * image programming. The time based timeout checking will add too much + * overhead on it. Usually the state changes in 1 or 2 loops on the + * test server, and we set 10000 times loop here for safety. + */ + for (loops = N3000_NIOS_REGBUS_RETRY_COUNT; loops > 0 ; loops--) { + *v = readq(base + N3000_NS_STAT); + if (*v & N3000_NS_STAT_RW_VAL) + break; + cpu_relax(); + } + + return (loops > 0) ? 0 : -ETIMEDOUT; +} + +static int n3000_nios_reg_write(void *context, unsigned int reg, unsigned int val) +{ + struct n3000_nios *nn = context; + u64 v; + int ret; + + v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_WR) | + FIELD_PREP(N3000_NS_CTRL_ADDR, reg) | + FIELD_PREP(N3000_NS_CTRL_WR_DATA, val); + writeq(v, nn->base + N3000_NS_CTRL); + + ret = n3000_nios_poll_stat_timeout(nn->base, &v); + if (ret) + dev_err(nn->dev, "fail to write reg 0x%x val 0x%x: %d\n", + reg, val, ret); + + return ret; +} + +static int n3000_nios_reg_read(void *context, unsigned int reg, unsigned int *val) +{ + struct n3000_nios *nn = context; + u64 v; + int ret; + + v = FIELD_PREP(N3000_NS_CTRL_CMD_MSK, N3000_NS_CTRL_CMD_RD) | + FIELD_PREP(N3000_NS_CTRL_ADDR, reg); + writeq(v, nn->base + N3000_NS_CTRL); + + ret = n3000_nios_poll_stat_timeout(nn->base, &v); + if (ret) + dev_err(nn->dev, "fail to read reg 0x%x: %d\n", reg, ret); + else + *val = FIELD_GET(N3000_NS_STAT_RD_DATA, v); + + return ret; +} + +static const struct regmap_config n3000_nios_regbus_cfg = { + .reg_bits = 32, + .reg_stride = 4, + .val_bits = 32, + .fast_io = true, + + .reg_write = n3000_nios_reg_write, + .reg_read = n3000_nios_reg_read, +}; + +static int n3000_nios_probe(struct dfl_device *ddev) +{ + struct device *dev = &ddev->dev; + struct n3000_nios *nn; + int ret; + + nn = devm_kzalloc(dev, sizeof(*nn), GFP_KERNEL); + if (!nn) + return -ENOMEM; + + dev_set_drvdata(&ddev->dev, nn); + + nn->dev = dev; + + nn->base = devm_ioremap_resource(&ddev->dev, &ddev->mmio_res); + if (IS_ERR(nn->base)) + return PTR_ERR(nn->base); + + nn->regmap = devm_regmap_init(dev, NULL, nn, &n3000_nios_regbus_cfg); + if (IS_ERR(nn->regmap)) + return PTR_ERR(nn->regmap); + + ret = n3000_nios_init_done_check(nn); + if (ret) + return ret; + + ret = create_altera_spi_controller(nn); + if (ret) + dev_err(dev, "altera spi controller create failed: %d\n", ret); + + return ret; +} + +static void n3000_nios_remove(struct dfl_device *ddev) +{ + struct n3000_nios *nn = dev_get_drvdata(&ddev->dev); + + destroy_altera_spi_controller(nn); +} + +#define FME_FEATURE_ID_N3000_NIOS 0xd + +static const struct dfl_device_id n3000_nios_ids[] = { + { FME_ID, FME_FEATURE_ID_N3000_NIOS }, + { } +}; +MODULE_DEVICE_TABLE(dfl, n3000_nios_ids); + +static struct dfl_driver n3000_nios_driver = { + .drv = { + .name = "dfl-n3000-nios", + .dev_groups = n3000_nios_groups, + }, + .id_table = n3000_nios_ids, + .probe = n3000_nios_probe, + .remove = n3000_nios_remove, +}; + +module_dfl_driver(n3000_nios_driver); + +MODULE_DESCRIPTION("Driver for Nios private feature on Intel PAC N3000"); +MODULE_AUTHOR("Intel Corporation"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3