From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/fpga/microchip-spi.c | 399 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 399 insertions(+) create mode 100644 drivers/fpga/microchip-spi.c (limited to 'drivers/fpga/microchip-spi.c') diff --git a/drivers/fpga/microchip-spi.c b/drivers/fpga/microchip-spi.c new file mode 100644 index 000000000..7436976ea --- /dev/null +++ b/drivers/fpga/microchip-spi.c @@ -0,0 +1,399 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Microchip Polarfire FPGA programming over slave SPI interface. + */ + +#include +#include +#include +#include +#include +#include + +#define MPF_SPI_ISC_ENABLE 0x0B +#define MPF_SPI_ISC_DISABLE 0x0C +#define MPF_SPI_READ_STATUS 0x00 +#define MPF_SPI_READ_DATA 0x01 +#define MPF_SPI_FRAME_INIT 0xAE +#define MPF_SPI_FRAME 0xEE +#define MPF_SPI_PRG_MODE 0x01 +#define MPF_SPI_RELEASE 0x23 + +#define MPF_SPI_FRAME_SIZE 16 + +#define MPF_HEADER_SIZE_OFFSET 24 +#define MPF_DATA_SIZE_OFFSET 55 + +#define MPF_LOOKUP_TABLE_RECORD_SIZE 9 +#define MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET 0 +#define MPF_LOOKUP_TABLE_BLOCK_START_OFFSET 1 + +#define MPF_COMPONENTS_SIZE_ID 5 +#define MPF_BITSTREAM_ID 8 + +#define MPF_BITS_PER_COMPONENT_SIZE 22 + +#define MPF_STATUS_POLL_RETRIES 10000 +#define MPF_STATUS_BUSY BIT(0) +#define MPF_STATUS_READY BIT(1) +#define MPF_STATUS_SPI_VIOLATION BIT(2) +#define MPF_STATUS_SPI_ERROR BIT(3) + +struct mpf_priv { + struct spi_device *spi; + bool program_mode; +}; + +static int mpf_read_status(struct spi_device *spi) +{ + u8 status = 0, status_command = MPF_SPI_READ_STATUS; + struct spi_transfer xfers[2] = { 0 }; + int ret; + + /* + * HW status is returned on MISO in the first byte after CS went + * active. However, first reading can be inadequate, so we submit + * two identical SPI transfers and use result of the later one. + */ + xfers[0].tx_buf = &status_command; + xfers[1].tx_buf = &status_command; + xfers[0].rx_buf = &status; + xfers[1].rx_buf = &status; + xfers[0].len = 1; + xfers[1].len = 1; + xfers[0].cs_change = 1; + + ret = spi_sync_transfer(spi, xfers, 2); + + if ((status & MPF_STATUS_SPI_VIOLATION) || + (status & MPF_STATUS_SPI_ERROR)) + ret = -EIO; + + return ret ? : status; +} + +static enum fpga_mgr_states mpf_ops_state(struct fpga_manager *mgr) +{ + struct mpf_priv *priv = mgr->priv; + struct spi_device *spi; + bool program_mode; + int status; + + spi = priv->spi; + program_mode = priv->program_mode; + status = mpf_read_status(spi); + + if (!program_mode && !status) + return FPGA_MGR_STATE_OPERATING; + + return FPGA_MGR_STATE_UNKNOWN; +} + +static int mpf_ops_parse_header(struct fpga_manager *mgr, + struct fpga_image_info *info, + const char *buf, size_t count) +{ + size_t component_size_byte_num, component_size_byte_off, + components_size_start, bitstream_start, + block_id_offset, block_start_offset; + u8 header_size, blocks_num, block_id; + u32 block_start, component_size; + u16 components_num, i; + + if (!buf) { + dev_err(&mgr->dev, "Image buffer is not provided\n"); + return -EINVAL; + } + + header_size = *(buf + MPF_HEADER_SIZE_OFFSET); + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + /* + * Go through look-up table to find out where actual bitstream starts + * and where sizes of components of the bitstream lies. + */ + blocks_num = *(buf + header_size - 1); + block_id_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_ID_OFFSET; + block_start_offset = header_size + MPF_LOOKUP_TABLE_BLOCK_START_OFFSET; + + header_size += blocks_num * MPF_LOOKUP_TABLE_RECORD_SIZE; + if (header_size > count) { + info->header_size = header_size; + return -EAGAIN; + } + + components_size_start = 0; + bitstream_start = 0; + + while (blocks_num--) { + block_id = *(buf + block_id_offset); + block_start = get_unaligned_le32(buf + block_start_offset); + + switch (block_id) { + case MPF_BITSTREAM_ID: + bitstream_start = block_start; + info->header_size = block_start; + if (block_start > count) + return -EAGAIN; + + break; + case MPF_COMPONENTS_SIZE_ID: + components_size_start = block_start; + break; + default: + break; + } + + if (bitstream_start && components_size_start) + break; + + block_id_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + block_start_offset += MPF_LOOKUP_TABLE_RECORD_SIZE; + } + + if (!bitstream_start || !components_size_start) { + dev_err(&mgr->dev, "Failed to parse header look-up table\n"); + return -EFAULT; + } + + /* + * Parse bitstream size. + * Sizes of components of the bitstream are 22-bits long placed next + * to each other. Image header should be extended by now up to where + * actual bitstream starts, so no need for overflow check anymore. + */ + components_num = get_unaligned_le16(buf + MPF_DATA_SIZE_OFFSET); + + for (i = 0; i < components_num; i++) { + component_size_byte_num = + (i * MPF_BITS_PER_COMPONENT_SIZE) / BITS_PER_BYTE; + component_size_byte_off = + (i * MPF_BITS_PER_COMPONENT_SIZE) % BITS_PER_BYTE; + + component_size = get_unaligned_le32(buf + + components_size_start + + component_size_byte_num); + component_size >>= component_size_byte_off; + component_size &= GENMASK(MPF_BITS_PER_COMPONENT_SIZE - 1, 0); + + info->data_size += component_size * MPF_SPI_FRAME_SIZE; + } + + return 0; +} + +/* Poll HW status until busy bit is cleared and mask bits are set. */ +static int mpf_poll_status(struct spi_device *spi, u8 mask) +{ + int status, retries = MPF_STATUS_POLL_RETRIES; + + while (retries--) { + status = mpf_read_status(spi); + if (status < 0) + return status; + + if (status & MPF_STATUS_BUSY) + continue; + + if (!mask || (status & mask)) + return status; + } + + return -EBUSY; +} + +static int mpf_spi_write(struct spi_device *spi, const void *buf, size_t buf_size) +{ + int status = mpf_poll_status(spi, 0); + + if (status < 0) + return status; + + return spi_write(spi, buf, buf_size); +} + +static int mpf_spi_write_then_read(struct spi_device *spi, + const void *txbuf, size_t txbuf_size, + void *rxbuf, size_t rxbuf_size) +{ + const u8 read_command[] = { MPF_SPI_READ_DATA }; + int ret; + + ret = mpf_spi_write(spi, txbuf, txbuf_size); + if (ret) + return ret; + + ret = mpf_poll_status(spi, MPF_STATUS_READY); + if (ret < 0) + return ret; + + return spi_write_then_read(spi, read_command, sizeof(read_command), + rxbuf, rxbuf_size); +} + +static int mpf_ops_write_init(struct fpga_manager *mgr, + struct fpga_image_info *info, const char *buf, + size_t count) +{ + const u8 program_mode[] = { MPF_SPI_FRAME_INIT, MPF_SPI_PRG_MODE }; + const u8 isc_en_command[] = { MPF_SPI_ISC_ENABLE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + u32 isc_ret = 0; + int ret; + + if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) { + dev_err(dev, "Partial reconfiguration is not supported\n"); + return -EOPNOTSUPP; + } + + spi = priv->spi; + + ret = mpf_spi_write_then_read(spi, isc_en_command, sizeof(isc_en_command), + &isc_ret, sizeof(isc_ret)); + if (ret || isc_ret) { + dev_err(dev, "Failed to enable ISC: spi_ret %d, isc_ret %u\n", + ret, isc_ret); + return -EFAULT; + } + + ret = mpf_spi_write(spi, program_mode, sizeof(program_mode)); + if (ret) { + dev_err(dev, "Failed to enter program mode: %d\n", ret); + return ret; + } + + priv->program_mode = true; + + return 0; +} + +static int mpf_ops_write(struct fpga_manager *mgr, const char *buf, size_t count) +{ + u8 spi_frame_command[] = { MPF_SPI_FRAME }; + struct spi_transfer xfers[2] = { 0 }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret, i; + + if (count % MPF_SPI_FRAME_SIZE) { + dev_err(dev, "Bitstream size is not a multiple of %d\n", + MPF_SPI_FRAME_SIZE); + return -EINVAL; + } + + spi = priv->spi; + + xfers[0].tx_buf = spi_frame_command; + xfers[0].len = sizeof(spi_frame_command); + + for (i = 0; i < count / MPF_SPI_FRAME_SIZE; i++) { + xfers[1].tx_buf = buf + i * MPF_SPI_FRAME_SIZE; + xfers[1].len = MPF_SPI_FRAME_SIZE; + + ret = mpf_poll_status(spi, 0); + if (ret >= 0) + ret = spi_sync_transfer(spi, xfers, ARRAY_SIZE(xfers)); + + if (ret) { + dev_err(dev, "Failed to write bitstream frame %d/%zu\n", + i, count / MPF_SPI_FRAME_SIZE); + return ret; + } + } + + return 0; +} + +static int mpf_ops_write_complete(struct fpga_manager *mgr, + struct fpga_image_info *info) +{ + const u8 isc_dis_command[] = { MPF_SPI_ISC_DISABLE }; + const u8 release_command[] = { MPF_SPI_RELEASE }; + struct mpf_priv *priv = mgr->priv; + struct device *dev = &mgr->dev; + struct spi_device *spi; + int ret; + + spi = priv->spi; + + ret = mpf_spi_write(spi, isc_dis_command, sizeof(isc_dis_command)); + if (ret) { + dev_err(dev, "Failed to disable ISC: %d\n", ret); + return ret; + } + + usleep_range(1000, 2000); + + ret = mpf_spi_write(spi, release_command, sizeof(release_command)); + if (ret) { + dev_err(dev, "Failed to exit program mode: %d\n", ret); + return ret; + } + + priv->program_mode = false; + + return 0; +} + +static const struct fpga_manager_ops mpf_ops = { + .state = mpf_ops_state, + .initial_header_size = 71, + .skip_header = true, + .parse_header = mpf_ops_parse_header, + .write_init = mpf_ops_write_init, + .write = mpf_ops_write, + .write_complete = mpf_ops_write_complete, +}; + +static int mpf_probe(struct spi_device *spi) +{ + struct device *dev = &spi->dev; + struct fpga_manager *mgr; + struct mpf_priv *priv; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->spi = spi; + + mgr = devm_fpga_mgr_register(dev, "Microchip Polarfire SPI FPGA Manager", + &mpf_ops, priv); + + return PTR_ERR_OR_ZERO(mgr); +} + +static const struct spi_device_id mpf_spi_ids[] = { + { .name = "mpf-spi-fpga-mgr", }, + {}, +}; +MODULE_DEVICE_TABLE(spi, mpf_spi_ids); + +#if IS_ENABLED(CONFIG_OF) +static const struct of_device_id mpf_of_ids[] = { + { .compatible = "microchip,mpf-spi-fpga-mgr" }, + {}, +}; +MODULE_DEVICE_TABLE(of, mpf_of_ids); +#endif /* IS_ENABLED(CONFIG_OF) */ + +static struct spi_driver mpf_driver = { + .probe = mpf_probe, + .id_table = mpf_spi_ids, + .driver = { + .name = "microchip_mpf_spi_fpga_mgr", + .of_match_table = of_match_ptr(mpf_of_ids), + }, +}; + +module_spi_driver(mpf_driver); + +MODULE_DESCRIPTION("Microchip Polarfire SPI FPGA Manager"); +MODULE_AUTHOR("Ivan Bornyakov "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3