From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpio/gpio-f7188x.c | 666 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 666 insertions(+) create mode 100644 drivers/gpio/gpio-f7188x.c (limited to 'drivers/gpio/gpio-f7188x.c') diff --git a/drivers/gpio/gpio-f7188x.c b/drivers/gpio/gpio-f7188x.c new file mode 100644 index 000000000..9effa7769 --- /dev/null +++ b/drivers/gpio/gpio-f7188x.c @@ -0,0 +1,666 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * GPIO driver for Fintek and Nuvoton Super-I/O chips + * + * Copyright (C) 2010-2013 LaCie + * + * Author: Simon Guinot + */ + +#define DRVNAME "gpio-f7188x" +#define pr_fmt(fmt) DRVNAME ": " fmt + +#include +#include +#include +#include +#include +#include + +/* + * Super-I/O registers + */ +#define SIO_LDSEL 0x07 /* Logical device select */ +#define SIO_DEVID 0x20 /* Device ID (2 bytes) */ + +#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */ +#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */ + +/* + * Fintek devices. + */ +#define SIO_FINTEK_DEVREV 0x22 /* Fintek Device revision */ +#define SIO_FINTEK_MANID 0x23 /* Fintek ID (2 bytes) */ + +#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */ + +#define SIO_F71869_ID 0x0814 /* F71869 chipset ID */ +#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */ +#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */ +#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */ +#define SIO_F71889A_ID 0x1005 /* F71889A chipset ID */ +#define SIO_F81866_ID 0x1010 /* F81866 chipset ID */ +#define SIO_F81804_ID 0x1502 /* F81804 chipset ID, same for F81966 */ +#define SIO_F81865_ID 0x0704 /* F81865 chipset ID */ + +#define SIO_LD_GPIO_FINTEK 0x06 /* GPIO logical device */ + +/* + * Nuvoton devices. + */ +#define SIO_NCT6116D_ID 0xD283 /* NCT6116D chipset ID */ + +#define SIO_LD_GPIO_NUVOTON 0x07 /* GPIO logical device */ + + +enum chips { + f71869, + f71869a, + f71882fg, + f71889a, + f71889f, + f81866, + f81804, + f81865, + nct6116d, +}; + +static const char * const f7188x_names[] = { + "f71869", + "f71869a", + "f71882fg", + "f71889a", + "f71889f", + "f81866", + "f81804", + "f81865", + "nct6116d", +}; + +struct f7188x_sio { + int addr; + int device; + enum chips type; +}; + +struct f7188x_gpio_bank { + struct gpio_chip chip; + unsigned int regbase; + struct f7188x_gpio_data *data; +}; + +struct f7188x_gpio_data { + struct f7188x_sio *sio; + int nr_bank; + struct f7188x_gpio_bank *bank; +}; + +/* + * Super-I/O functions. + */ + +static inline int superio_inb(int base, int reg) +{ + outb(reg, base); + return inb(base + 1); +} + +static int superio_inw(int base, int reg) +{ + int val; + + outb(reg++, base); + val = inb(base + 1) << 8; + outb(reg, base); + val |= inb(base + 1); + + return val; +} + +static inline void superio_outb(int base, int reg, int val) +{ + outb(reg, base); + outb(val, base + 1); +} + +static inline int superio_enter(int base) +{ + /* Don't step on other drivers' I/O space by accident. */ + if (!request_muxed_region(base, 2, DRVNAME)) { + pr_err("I/O address 0x%04x already in use\n", base); + return -EBUSY; + } + + /* According to the datasheet the key must be send twice. */ + outb(SIO_UNLOCK_KEY, base); + outb(SIO_UNLOCK_KEY, base); + + return 0; +} + +static inline void superio_select(int base, int ld) +{ + outb(SIO_LDSEL, base); + outb(ld, base + 1); +} + +static inline void superio_exit(int base) +{ + outb(SIO_LOCK_KEY, base); + release_region(base, 2); +} + +/* + * GPIO chip. + */ + +static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset); +static int f7188x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value); +static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value); +static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config); + +#define F7188X_GPIO_BANK(_base, _ngpio, _regbase, _label) \ + { \ + .chip = { \ + .label = _label, \ + .owner = THIS_MODULE, \ + .get_direction = f7188x_gpio_get_direction, \ + .direction_input = f7188x_gpio_direction_in, \ + .get = f7188x_gpio_get, \ + .direction_output = f7188x_gpio_direction_out, \ + .set = f7188x_gpio_set, \ + .set_config = f7188x_gpio_set_config, \ + .base = _base, \ + .ngpio = _ngpio, \ + .can_sleep = true, \ + }, \ + .regbase = _regbase, \ + } + +#define f7188x_gpio_dir(base) ((base) + 0) +#define f7188x_gpio_data_out(base) ((base) + 1) +#define f7188x_gpio_data_in(base) ((base) + 2) +/* Output mode register (0:open drain 1:push-pull). */ +#define f7188x_gpio_out_mode(base) ((base) + 3) + +#define f7188x_gpio_dir_invert(type) ((type) == nct6116d) +#define f7188x_gpio_data_single(type) ((type) == nct6116d) + +static struct f7188x_gpio_bank f71869_gpio_bank[] = { + F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 6, 0x90, DRVNAME "-6"), +}; + +static struct f7188x_gpio_bank f71869a_gpio_bank[] = { + F7188X_GPIO_BANK(0, 6, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), + F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), +}; + +static struct f7188x_gpio_bank f71882_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 4, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 4, 0xB0, DRVNAME "-4"), +}; + +static struct f7188x_gpio_bank f71889a_gpio_bank[] = { + F7188X_GPIO_BANK(0, 7, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 7, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), + F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), +}; + +static struct f7188x_gpio_bank f71889_gpio_bank[] = { + F7188X_GPIO_BANK(0, 7, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 7, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 5, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), + F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), +}; + +static struct f7188x_gpio_bank f81866_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-6"), + F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-7"), + F7188X_GPIO_BANK(80, 8, 0x88, DRVNAME "-8"), +}; + + +static struct f7188x_gpio_bank f81804_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-3"), + F7188X_GPIO_BANK(60, 8, 0x90, DRVNAME "-4"), + F7188X_GPIO_BANK(70, 8, 0x80, DRVNAME "-5"), + F7188X_GPIO_BANK(90, 8, 0x98, DRVNAME "-6"), +}; + +static struct f7188x_gpio_bank f81865_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xF0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE0, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xD0, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xC0, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xB0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 8, 0xA0, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 5, 0x90, DRVNAME "-6"), +}; + +static struct f7188x_gpio_bank nct6116d_gpio_bank[] = { + F7188X_GPIO_BANK(0, 8, 0xE0, DRVNAME "-0"), + F7188X_GPIO_BANK(10, 8, 0xE4, DRVNAME "-1"), + F7188X_GPIO_BANK(20, 8, 0xE8, DRVNAME "-2"), + F7188X_GPIO_BANK(30, 8, 0xEC, DRVNAME "-3"), + F7188X_GPIO_BANK(40, 8, 0xF0, DRVNAME "-4"), + F7188X_GPIO_BANK(50, 8, 0xF4, DRVNAME "-5"), + F7188X_GPIO_BANK(60, 8, 0xF8, DRVNAME "-6"), + F7188X_GPIO_BANK(70, 1, 0xFC, DRVNAME "-7"), +}; + +static int f7188x_gpio_get_direction(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, sio->device); + + dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); + + superio_exit(sio->addr); + + if (f7188x_gpio_dir_invert(sio->type)) + dir = ~dir; + + if (dir & BIT(offset)) + return GPIO_LINE_DIRECTION_OUT; + + return GPIO_LINE_DIRECTION_IN; +} + +static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, sio->device); + + dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); + + if (f7188x_gpio_dir_invert(sio->type)) + dir |= BIT(offset); + else + dir &= ~BIT(offset); + superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir); + + superio_exit(sio->addr); + + return 0; +} + +static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir, data; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, sio->device); + + dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); + dir = !!(dir & BIT(offset)); + if (f7188x_gpio_data_single(sio->type) || dir) + data = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); + else + data = superio_inb(sio->addr, f7188x_gpio_data_in(bank->regbase)); + + superio_exit(sio->addr); + + return !!(data & BIT(offset)); +} + +static int f7188x_gpio_direction_out(struct gpio_chip *chip, + unsigned offset, int value) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 dir, data_out; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, sio->device); + + data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); + if (value) + data_out |= BIT(offset); + else + data_out &= ~BIT(offset); + superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out); + + dir = superio_inb(sio->addr, f7188x_gpio_dir(bank->regbase)); + if (f7188x_gpio_dir_invert(sio->type)) + dir &= ~BIT(offset); + else + dir |= BIT(offset); + superio_outb(sio->addr, f7188x_gpio_dir(bank->regbase), dir); + + superio_exit(sio->addr); + + return 0; +} + +static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value) +{ + int err; + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 data_out; + + err = superio_enter(sio->addr); + if (err) + return; + superio_select(sio->addr, sio->device); + + data_out = superio_inb(sio->addr, f7188x_gpio_data_out(bank->regbase)); + if (value) + data_out |= BIT(offset); + else + data_out &= ~BIT(offset); + superio_outb(sio->addr, f7188x_gpio_data_out(bank->regbase), data_out); + + superio_exit(sio->addr); +} + +static int f7188x_gpio_set_config(struct gpio_chip *chip, unsigned offset, + unsigned long config) +{ + int err; + enum pin_config_param param = pinconf_to_config_param(config); + struct f7188x_gpio_bank *bank = gpiochip_get_data(chip); + struct f7188x_sio *sio = bank->data->sio; + u8 data; + + if (param != PIN_CONFIG_DRIVE_OPEN_DRAIN && + param != PIN_CONFIG_DRIVE_PUSH_PULL) + return -ENOTSUPP; + + err = superio_enter(sio->addr); + if (err) + return err; + superio_select(sio->addr, sio->device); + + data = superio_inb(sio->addr, f7188x_gpio_out_mode(bank->regbase)); + if (param == PIN_CONFIG_DRIVE_OPEN_DRAIN) + data &= ~BIT(offset); + else + data |= BIT(offset); + superio_outb(sio->addr, f7188x_gpio_out_mode(bank->regbase), data); + + superio_exit(sio->addr); + return 0; +} + +/* + * Platform device and driver. + */ + +static int f7188x_gpio_probe(struct platform_device *pdev) +{ + int err; + int i; + struct f7188x_sio *sio = dev_get_platdata(&pdev->dev); + struct f7188x_gpio_data *data; + + data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + switch (sio->type) { + case f71869: + data->nr_bank = ARRAY_SIZE(f71869_gpio_bank); + data->bank = f71869_gpio_bank; + break; + case f71869a: + data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank); + data->bank = f71869a_gpio_bank; + break; + case f71882fg: + data->nr_bank = ARRAY_SIZE(f71882_gpio_bank); + data->bank = f71882_gpio_bank; + break; + case f71889a: + data->nr_bank = ARRAY_SIZE(f71889a_gpio_bank); + data->bank = f71889a_gpio_bank; + break; + case f71889f: + data->nr_bank = ARRAY_SIZE(f71889_gpio_bank); + data->bank = f71889_gpio_bank; + break; + case f81866: + data->nr_bank = ARRAY_SIZE(f81866_gpio_bank); + data->bank = f81866_gpio_bank; + break; + case f81804: + data->nr_bank = ARRAY_SIZE(f81804_gpio_bank); + data->bank = f81804_gpio_bank; + break; + case f81865: + data->nr_bank = ARRAY_SIZE(f81865_gpio_bank); + data->bank = f81865_gpio_bank; + break; + case nct6116d: + data->nr_bank = ARRAY_SIZE(nct6116d_gpio_bank); + data->bank = nct6116d_gpio_bank; + break; + default: + return -ENODEV; + } + data->sio = sio; + + platform_set_drvdata(pdev, data); + + /* For each GPIO bank, register a GPIO chip. */ + for (i = 0; i < data->nr_bank; i++) { + struct f7188x_gpio_bank *bank = &data->bank[i]; + + bank->chip.parent = &pdev->dev; + bank->data = data; + + err = devm_gpiochip_add_data(&pdev->dev, &bank->chip, bank); + if (err) { + dev_err(&pdev->dev, + "Failed to register gpiochip %d: %d\n", + i, err); + return err; + } + } + + return 0; +} + +static int __init f7188x_find(int addr, struct f7188x_sio *sio) +{ + int err; + u16 devid; + u16 manid; + + err = superio_enter(addr); + if (err) + return err; + + err = -ENODEV; + + sio->device = SIO_LD_GPIO_FINTEK; + devid = superio_inw(addr, SIO_DEVID); + switch (devid) { + case SIO_F71869_ID: + sio->type = f71869; + break; + case SIO_F71869A_ID: + sio->type = f71869a; + break; + case SIO_F71882_ID: + sio->type = f71882fg; + break; + case SIO_F71889A_ID: + sio->type = f71889a; + break; + case SIO_F71889_ID: + sio->type = f71889f; + break; + case SIO_F81866_ID: + sio->type = f81866; + break; + case SIO_F81804_ID: + sio->type = f81804; + break; + case SIO_F81865_ID: + sio->type = f81865; + break; + case SIO_NCT6116D_ID: + sio->device = SIO_LD_GPIO_NUVOTON; + sio->type = nct6116d; + break; + default: + pr_info("Unsupported Fintek device 0x%04x\n", devid); + goto err; + } + + /* double check manufacturer where possible */ + if (sio->type != nct6116d) { + manid = superio_inw(addr, SIO_FINTEK_MANID); + if (manid != SIO_FINTEK_ID) { + pr_debug("Not a Fintek device at 0x%08x\n", addr); + goto err; + } + } + + sio->addr = addr; + err = 0; + + pr_info("Found %s at %#x\n", f7188x_names[sio->type], (unsigned int)addr); + if (sio->type != nct6116d) + pr_info(" revision %d\n", superio_inb(addr, SIO_FINTEK_DEVREV)); + +err: + superio_exit(addr); + return err; +} + +static struct platform_device *f7188x_gpio_pdev; + +static int __init +f7188x_gpio_device_add(const struct f7188x_sio *sio) +{ + int err; + + f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1); + if (!f7188x_gpio_pdev) + return -ENOMEM; + + err = platform_device_add_data(f7188x_gpio_pdev, + sio, sizeof(*sio)); + if (err) { + pr_err("Platform data allocation failed\n"); + goto err; + } + + err = platform_device_add(f7188x_gpio_pdev); + if (err) { + pr_err("Device addition failed\n"); + goto err; + } + + return 0; + +err: + platform_device_put(f7188x_gpio_pdev); + + return err; +} + +/* + * Try to match a supported Fintek device by reading the (hard-wired) + * configuration I/O ports. If available, then register both the platform + * device and driver to support the GPIOs. + */ + +static struct platform_driver f7188x_gpio_driver = { + .driver = { + .name = DRVNAME, + }, + .probe = f7188x_gpio_probe, +}; + +static int __init f7188x_gpio_init(void) +{ + int err; + struct f7188x_sio sio; + + if (f7188x_find(0x2e, &sio) && + f7188x_find(0x4e, &sio)) + return -ENODEV; + + err = platform_driver_register(&f7188x_gpio_driver); + if (!err) { + err = f7188x_gpio_device_add(&sio); + if (err) + platform_driver_unregister(&f7188x_gpio_driver); + } + + return err; +} +subsys_initcall(f7188x_gpio_init); + +static void __exit f7188x_gpio_exit(void) +{ + platform_device_unregister(f7188x_gpio_pdev); + platform_driver_unregister(&f7188x_gpio_driver); +} +module_exit(f7188x_gpio_exit); + +MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889A, F71889F and F81866"); +MODULE_AUTHOR("Simon Guinot "); +MODULE_LICENSE("GPL"); -- cgit v1.2.3