From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpio/gpio-it87.c | 412 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 412 insertions(+) create mode 100644 drivers/gpio/gpio-it87.c (limited to 'drivers/gpio/gpio-it87.c') diff --git a/drivers/gpio/gpio-it87.c b/drivers/gpio/gpio-it87.c new file mode 100644 index 000000000..f332341fd --- /dev/null +++ b/drivers/gpio/gpio-it87.c @@ -0,0 +1,412 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GPIO interface for IT87xx Super I/O chips + * + * Author: Diego Elio Pettenò + * Copyright (c) 2017 Google, Inc. + * + * Based on it87_wdt.c by Oliver Schuster + * gpio-it8761e.c by Denis Turischev + * gpio-stmpe.c by Rabin Vincent + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include +#include +#include +#include +#include +#include +#include +#include + +/* Chip Id numbers */ +#define NO_DEV_ID 0xffff +#define IT8613_ID 0x8613 +#define IT8620_ID 0x8620 +#define IT8628_ID 0x8628 +#define IT8718_ID 0x8718 +#define IT8728_ID 0x8728 +#define IT8732_ID 0x8732 +#define IT8761_ID 0x8761 +#define IT8772_ID 0x8772 +#define IT8786_ID 0x8786 + +/* IO Ports */ +#define REG 0x2e +#define VAL 0x2f + +/* Logical device Numbers LDN */ +#define GPIO 0x07 + +/* Configuration Registers and Functions */ +#define LDNREG 0x07 +#define CHIPID 0x20 +#define CHIPREV 0x22 + +/** + * struct it87_gpio - it87-specific GPIO chip + * @chip: the underlying gpio_chip structure + * @lock: a lock to avoid races between operations + * @io_base: base address for gpio ports + * @io_size: size of the port rage starting from io_base. + * @output_base: Super I/O register address for Output Enable register + * @simple_base: Super I/O 'Simple I/O' Enable register + * @simple_size: Super IO 'Simple I/O' Enable register size; this is + * required because IT87xx chips might only provide Simple I/O + * switches on a subset of lines, whereas the others keep the + * same status all time. + */ +struct it87_gpio { + struct gpio_chip chip; + spinlock_t lock; + u16 io_base; + u16 io_size; + u8 output_base; + u8 simple_base; + u8 simple_size; +}; + +static struct it87_gpio it87_gpio_chip = { + .lock = __SPIN_LOCK_UNLOCKED(it87_gpio_chip.lock), +}; + +/* Superio chip access functions; copied from wdt_it87 */ + +static inline int superio_enter(void) +{ + /* + * Try to reserve REG and REG + 1 for exclusive access. + */ + if (!request_muxed_region(REG, 2, KBUILD_MODNAME)) + return -EBUSY; + + outb(0x87, REG); + outb(0x01, REG); + outb(0x55, REG); + outb(0x55, REG); + return 0; +} + +static inline void superio_exit(void) +{ + outb(0x02, REG); + outb(0x02, VAL); + release_region(REG, 2); +} + +static inline void superio_select(int ldn) +{ + outb(LDNREG, REG); + outb(ldn, VAL); +} + +static inline int superio_inb(int reg) +{ + outb(reg, REG); + return inb(VAL); +} + +static inline void superio_outb(int val, int reg) +{ + outb(reg, REG); + outb(val, VAL); +} + +static inline int superio_inw(int reg) +{ + int val; + + outb(reg++, REG); + val = inb(VAL) << 8; + outb(reg, REG); + val |= inb(VAL); + return val; +} + +static inline void superio_set_mask(int mask, int reg) +{ + u8 curr_val = superio_inb(reg); + u8 new_val = curr_val | mask; + + if (curr_val != new_val) + superio_outb(new_val, reg); +} + +static inline void superio_clear_mask(int mask, int reg) +{ + u8 curr_val = superio_inb(reg); + u8 new_val = curr_val & ~mask; + + if (curr_val != new_val) + superio_outb(new_val, reg); +} + +static int it87_gpio_request(struct gpio_chip *chip, unsigned gpio_num) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* not all the IT87xx chips support Simple I/O and not all of + * them allow all the lines to be set/unset to Simple I/O. + */ + if (group < it87_gpio->simple_size) + superio_set_mask(mask, group + it87_gpio->simple_base); + + /* clear output enable, setting the pin to input, as all the + * newly-exported GPIO interfaces are set to input. + */ + superio_clear_mask(mask, group + it87_gpio->output_base); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static int it87_gpio_get(struct gpio_chip *chip, unsigned gpio_num) +{ + u16 reg; + u8 mask; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + reg = (gpio_num / 8) + it87_gpio->io_base; + + return !!(inb(reg) & mask); +} + +static int it87_gpio_direction_in(struct gpio_chip *chip, unsigned gpio_num) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* clear the output enable bit */ + superio_clear_mask(mask, group + it87_gpio->output_base); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static void it87_gpio_set(struct gpio_chip *chip, + unsigned gpio_num, int val) +{ + u8 mask, curr_vals; + u16 reg; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + reg = (gpio_num / 8) + it87_gpio->io_base; + + curr_vals = inb(reg); + if (val) + outb(curr_vals | mask, reg); + else + outb(curr_vals & ~mask, reg); +} + +static int it87_gpio_direction_out(struct gpio_chip *chip, + unsigned gpio_num, int val) +{ + u8 mask, group; + int rc = 0; + struct it87_gpio *it87_gpio = gpiochip_get_data(chip); + + mask = 1 << (gpio_num % 8); + group = (gpio_num / 8); + + spin_lock(&it87_gpio->lock); + + rc = superio_enter(); + if (rc) + goto exit; + + /* set the output enable bit */ + superio_set_mask(mask, group + it87_gpio->output_base); + + it87_gpio_set(chip, gpio_num, val); + + superio_exit(); + +exit: + spin_unlock(&it87_gpio->lock); + return rc; +} + +static const struct gpio_chip it87_template_chip = { + .label = KBUILD_MODNAME, + .owner = THIS_MODULE, + .request = it87_gpio_request, + .get = it87_gpio_get, + .direction_input = it87_gpio_direction_in, + .set = it87_gpio_set, + .direction_output = it87_gpio_direction_out, + .base = -1 +}; + +static int __init it87_gpio_init(void) +{ + int rc = 0, i; + u16 chip_type; + u8 chip_rev, gpio_ba_reg; + char *labels, **labels_table; + + struct it87_gpio *it87_gpio = &it87_gpio_chip; + + rc = superio_enter(); + if (rc) + return rc; + + chip_type = superio_inw(CHIPID); + chip_rev = superio_inb(CHIPREV) & 0x0f; + superio_exit(); + + it87_gpio->chip = it87_template_chip; + + switch (chip_type) { + case IT8613_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 8; /* it8613 only needs 6, use 8 for alignment */ + it87_gpio->output_base = 0xc8; + it87_gpio->simple_base = 0xc0; + it87_gpio->simple_size = 6; + it87_gpio->chip.ngpio = 64; /* has 48, use 64 for convenient calc */ + break; + case IT8620_ID: + case IT8628_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 11; + it87_gpio->output_base = 0xc8; + it87_gpio->simple_size = 0; + it87_gpio->chip.ngpio = 64; + break; + case IT8718_ID: + case IT8728_ID: + case IT8732_ID: + case IT8772_ID: + case IT8786_ID: + gpio_ba_reg = 0x62; + it87_gpio->io_size = 8; + it87_gpio->output_base = 0xc8; + it87_gpio->simple_base = 0xc0; + it87_gpio->simple_size = 5; + it87_gpio->chip.ngpio = 64; + break; + case IT8761_ID: + gpio_ba_reg = 0x60; + it87_gpio->io_size = 4; + it87_gpio->output_base = 0xf0; + it87_gpio->simple_size = 0; + it87_gpio->chip.ngpio = 16; + break; + case NO_DEV_ID: + pr_err("no device\n"); + return -ENODEV; + default: + pr_err("Unknown Chip found, Chip %04x Revision %x\n", + chip_type, chip_rev); + return -ENODEV; + } + + rc = superio_enter(); + if (rc) + return rc; + + superio_select(GPIO); + + /* fetch GPIO base address */ + it87_gpio->io_base = superio_inw(gpio_ba_reg); + + superio_exit(); + + pr_info("Found Chip IT%04x rev %x. %u GPIO lines starting at %04xh\n", + chip_type, chip_rev, it87_gpio->chip.ngpio, + it87_gpio->io_base); + + if (!request_region(it87_gpio->io_base, it87_gpio->io_size, + KBUILD_MODNAME)) + return -EBUSY; + + /* Set up aliases for the GPIO connection. + * + * ITE documentation for recent chips such as the IT8728F + * refers to the GPIO lines as GPxy, with a coordinates system + * where x is the GPIO group (starting from 1) and y is the + * bit within the group. + * + * By creating these aliases, we make it easier to understand + * to which GPIO pin we're referring to. + */ + labels = kcalloc(it87_gpio->chip.ngpio, sizeof("it87_gpXY"), + GFP_KERNEL); + labels_table = kcalloc(it87_gpio->chip.ngpio, sizeof(const char *), + GFP_KERNEL); + + if (!labels || !labels_table) { + rc = -ENOMEM; + goto labels_free; + } + + for (i = 0; i < it87_gpio->chip.ngpio; i++) { + char *label = &labels[i * sizeof("it87_gpXY")]; + + sprintf(label, "it87_gp%u%u", 1+(i/8), i%8); + labels_table[i] = label; + } + + it87_gpio->chip.names = (const char *const*)labels_table; + + rc = gpiochip_add_data(&it87_gpio->chip, it87_gpio); + if (rc) + goto labels_free; + + return 0; + +labels_free: + kfree(labels_table); + kfree(labels); + release_region(it87_gpio->io_base, it87_gpio->io_size); + return rc; +} + +static void __exit it87_gpio_exit(void) +{ + struct it87_gpio *it87_gpio = &it87_gpio_chip; + + gpiochip_remove(&it87_gpio->chip); + release_region(it87_gpio->io_base, it87_gpio->io_size); + kfree(it87_gpio->chip.names[0]); + kfree(it87_gpio->chip.names); +} + +module_init(it87_gpio_init); +module_exit(it87_gpio_exit); + +MODULE_AUTHOR("Diego Elio Pettenò "); +MODULE_DESCRIPTION("GPIO interface for IT87xx Super I/O chips"); +MODULE_LICENSE("GPL"); -- cgit v1.2.3