From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpio/gpio-zevio.c | 219 ++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 drivers/gpio/gpio-zevio.c (limited to 'drivers/gpio/gpio-zevio.c') diff --git a/drivers/gpio/gpio-zevio.c b/drivers/gpio/gpio-zevio.c new file mode 100644 index 000000000..ce9d12821 --- /dev/null +++ b/drivers/gpio/gpio-zevio.c @@ -0,0 +1,219 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * GPIO controller in LSI ZEVIO SoCs. + * + * Author: Fabian Vogt + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +/* + * Memory layout: + * This chip has four gpio sections, each controls 8 GPIOs. + * Bit 0 in section 0 is GPIO 0, bit 2 in section 1 is GPIO 10. + * Disclaimer: Reverse engineered! + * For more information refer to: + * http://hackspire.unsads.com/wiki/index.php/Memory-mapped_I/O_ports#90000000_-_General_Purpose_I.2FO_.28GPIO.29 + * + * 0x00-0x3F: Section 0 + * +0x00: Masked interrupt status (read-only) + * +0x04: R: Interrupt status W: Reset interrupt status + * +0x08: R: Interrupt mask W: Mask interrupt + * +0x0C: W: Unmask interrupt (write-only) + * +0x10: Direction: I/O=1/0 + * +0x14: Output + * +0x18: Input (read-only) + * +0x20: R: Level interrupt W: Set as level interrupt + * 0x40-0x7F: Section 1 + * 0x80-0xBF: Section 2 + * 0xC0-0xFF: Section 3 + */ + +#define ZEVIO_GPIO_SECTION_SIZE 0x40 + +/* Offsets to various registers */ +#define ZEVIO_GPIO_INT_MASKED_STATUS 0x00 +#define ZEVIO_GPIO_INT_STATUS 0x04 +#define ZEVIO_GPIO_INT_UNMASK 0x08 +#define ZEVIO_GPIO_INT_MASK 0x0C +#define ZEVIO_GPIO_DIRECTION 0x10 +#define ZEVIO_GPIO_OUTPUT 0x14 +#define ZEVIO_GPIO_INPUT 0x18 +#define ZEVIO_GPIO_INT_STICKY 0x20 + +/* Bit number of GPIO in its section */ +#define ZEVIO_GPIO_BIT(gpio) (gpio&7) + +struct zevio_gpio { + struct gpio_chip chip; + spinlock_t lock; + void __iomem *regs; +}; + +static inline u32 zevio_gpio_port_get(struct zevio_gpio *c, unsigned pin, + unsigned port_offset) +{ + unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; + return readl(IOMEM(c->regs + section_offset + port_offset)); +} + +static inline void zevio_gpio_port_set(struct zevio_gpio *c, unsigned pin, + unsigned port_offset, u32 val) +{ + unsigned section_offset = ((pin >> 3) & 3)*ZEVIO_GPIO_SECTION_SIZE; + writel(val, IOMEM(c->regs + section_offset + port_offset)); +} + +/* Functions for struct gpio_chip */ +static int zevio_gpio_get(struct gpio_chip *chip, unsigned pin) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val, dir; + + spin_lock(&controller->lock); + dir = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + if (dir & BIT(ZEVIO_GPIO_BIT(pin))) + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_INPUT); + else + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + spin_unlock(&controller->lock); + + return (val >> ZEVIO_GPIO_BIT(pin)) & 0x1; +} + +static void zevio_gpio_set(struct gpio_chip *chip, unsigned pin, int value) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + if (value) + val |= BIT(ZEVIO_GPIO_BIT(pin)); + else + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); + spin_unlock(&controller->lock); +} + +static int zevio_gpio_direction_input(struct gpio_chip *chip, unsigned pin) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + val |= BIT(ZEVIO_GPIO_BIT(pin)); + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); + + spin_unlock(&controller->lock); + + return 0; +} + +static int zevio_gpio_direction_output(struct gpio_chip *chip, + unsigned pin, int value) +{ + struct zevio_gpio *controller = gpiochip_get_data(chip); + u32 val; + + spin_lock(&controller->lock); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_OUTPUT); + if (value) + val |= BIT(ZEVIO_GPIO_BIT(pin)); + else + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_OUTPUT, val); + val = zevio_gpio_port_get(controller, pin, ZEVIO_GPIO_DIRECTION); + val &= ~BIT(ZEVIO_GPIO_BIT(pin)); + zevio_gpio_port_set(controller, pin, ZEVIO_GPIO_DIRECTION, val); + + spin_unlock(&controller->lock); + + return 0; +} + +static int zevio_gpio_to_irq(struct gpio_chip *chip, unsigned pin) +{ + /* + * TODO: Implement IRQs. + * Not implemented yet due to weird lockups + */ + + return -ENXIO; +} + +static const struct gpio_chip zevio_gpio_chip = { + .direction_input = zevio_gpio_direction_input, + .direction_output = zevio_gpio_direction_output, + .set = zevio_gpio_set, + .get = zevio_gpio_get, + .to_irq = zevio_gpio_to_irq, + .base = 0, + .owner = THIS_MODULE, + .ngpio = 32, + .of_gpio_n_cells = 2, +}; + +/* Initialization */ +static int zevio_gpio_probe(struct platform_device *pdev) +{ + struct zevio_gpio *controller; + int status, i; + + controller = devm_kzalloc(&pdev->dev, sizeof(*controller), GFP_KERNEL); + if (!controller) + return -ENOMEM; + + platform_set_drvdata(pdev, controller); + + /* Copy our reference */ + controller->chip = zevio_gpio_chip; + controller->chip.parent = &pdev->dev; + + controller->regs = devm_platform_ioremap_resource(pdev, 0); + if (IS_ERR(controller->regs)) + return dev_err_probe(&pdev->dev, PTR_ERR(controller->regs), + "failed to ioremap memory resource\n"); + + status = devm_gpiochip_add_data(&pdev->dev, &controller->chip, controller); + if (status) { + dev_err(&pdev->dev, "failed to add gpiochip: %d\n", status); + return status; + } + + spin_lock_init(&controller->lock); + + /* Disable interrupts, they only cause errors */ + for (i = 0; i < controller->chip.ngpio; i += 8) + zevio_gpio_port_set(controller, i, ZEVIO_GPIO_INT_MASK, 0xFF); + + dev_dbg(controller->chip.parent, "ZEVIO GPIO controller set up!\n"); + + return 0; +} + +static const struct of_device_id zevio_gpio_of_match[] = { + { .compatible = "lsi,zevio-gpio", }, + { }, +}; + +static struct platform_driver zevio_gpio_driver = { + .driver = { + .name = "gpio-zevio", + .of_match_table = zevio_gpio_of_match, + .suppress_bind_attrs = true, + }, + .probe = zevio_gpio_probe, +}; +builtin_platform_driver(zevio_gpio_driver); -- cgit v1.2.3