From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/amd/amdgpu/si_enums.h | 291 ++++++++++++++++++++++++++++++++++ 1 file changed, 291 insertions(+) create mode 100644 drivers/gpu/drm/amd/amdgpu/si_enums.h (limited to 'drivers/gpu/drm/amd/amdgpu/si_enums.h') diff --git a/drivers/gpu/drm/amd/amdgpu/si_enums.h b/drivers/gpu/drm/amd/amdgpu/si_enums.h new file mode 100644 index 000000000..4e935baa7 --- /dev/null +++ b/drivers/gpu/drm/amd/amdgpu/si_enums.h @@ -0,0 +1,291 @@ +/* + * Copyright 2016 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + */ +#ifndef SI_ENUMS_H +#define SI_ENUMS_H + +#define VBLANK_INT_MASK (1 << 0) +#define DC_HPDx_INT_EN (1 << 16) +#define VBLANK_ACK (1 << 4) +#define VLINE_ACK (1 << 4) + +#define CURSOR_WIDTH 64 +#define CURSOR_HEIGHT 64 + +#define VGA_VSTATUS_CNTL 0xFFFCFFFF +#define PRIORITY_MARK_MASK 0x7fff +#define PRIORITY_OFF (1 << 16) +#define PRIORITY_ALWAYS_ON (1 << 20) +#define INTERLEAVE_EN (1 << 0) + +#define LATENCY_WATERMARK_MASK(x) ((x) << 16) +#define DC_LB_MEMORY_CONFIG(x) ((x) << 20) +#define ICON_DEGAMMA_MODE(x) (((x) & 0x3) << 8) + +#define GRPH_ENDIAN_SWAP(x) (((x) & 0x3) << 0) +#define GRPH_ENDIAN_NONE 0 +#define GRPH_ENDIAN_8IN16 1 +#define GRPH_ENDIAN_8IN32 2 +#define GRPH_ENDIAN_8IN64 3 +#define GRPH_RED_CROSSBAR(x) (((x) & 0x3) << 4) +#define GRPH_RED_SEL_R 0 +#define GRPH_RED_SEL_G 1 +#define GRPH_RED_SEL_B 2 +#define GRPH_RED_SEL_A 3 +#define GRPH_GREEN_CROSSBAR(x) (((x) & 0x3) << 6) +#define GRPH_GREEN_SEL_G 0 +#define GRPH_GREEN_SEL_B 1 +#define GRPH_GREEN_SEL_A 2 +#define GRPH_GREEN_SEL_R 3 +#define GRPH_BLUE_CROSSBAR(x) (((x) & 0x3) << 8) +#define GRPH_BLUE_SEL_B 0 +#define GRPH_BLUE_SEL_A 1 +#define GRPH_BLUE_SEL_R 2 +#define GRPH_BLUE_SEL_G 3 +#define GRPH_ALPHA_CROSSBAR(x) (((x) & 0x3) << 10) +#define GRPH_ALPHA_SEL_A 0 +#define GRPH_ALPHA_SEL_R 1 +#define GRPH_ALPHA_SEL_G 2 +#define GRPH_ALPHA_SEL_B 3 + +#define GRPH_DEPTH(x) (((x) & 0x3) << 0) +#define GRPH_DEPTH_8BPP 0 +#define GRPH_DEPTH_16BPP 1 +#define GRPH_DEPTH_32BPP 2 + +#define GRPH_FORMAT(x) (((x) & 0x7) << 8) +#define GRPH_FORMAT_INDEXED 0 +#define GRPH_FORMAT_ARGB1555 0 +#define GRPH_FORMAT_ARGB565 1 +#define GRPH_FORMAT_ARGB4444 2 +#define GRPH_FORMAT_AI88 3 +#define GRPH_FORMAT_MONO16 4 +#define GRPH_FORMAT_BGRA5551 5 +#define GRPH_FORMAT_ARGB8888 0 +#define GRPH_FORMAT_ARGB2101010 1 +#define GRPH_FORMAT_32BPP_DIG 2 +#define GRPH_FORMAT_8B_ARGB2101010 3 +#define GRPH_FORMAT_BGRA1010102 4 +#define GRPH_FORMAT_8B_BGRA1010102 5 +#define GRPH_FORMAT_RGB111110 6 +#define GRPH_FORMAT_BGR101111 7 + +#define GRPH_NUM_BANKS(x) (((x) & 0x3) << 2) +#define GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) +#define GRPH_ARRAY_LINEAR_GENERAL 0 +#define GRPH_ARRAY_LINEAR_ALIGNED 1 +#define GRPH_ARRAY_1D_TILED_THIN1 2 +#define GRPH_ARRAY_2D_TILED_THIN1 4 +#define GRPH_TILE_SPLIT(x) (((x) & 0x7) << 13) +#define GRPH_BANK_WIDTH(x) (((x) & 0x3) << 6) +#define GRPH_BANK_HEIGHT(x) (((x) & 0x3) << 11) +#define GRPH_MACRO_TILE_ASPECT(x) (((x) & 0x3) << 18) +#define GRPH_ARRAY_MODE(x) (((x) & 0x7) << 20) +#define GRPH_PIPE_CONFIG(x) (((x) & 0x1f) << 24) + +#define CURSOR_EN (1 << 0) +#define CURSOR_MODE(x) (((x) & 0x3) << 8) +#define CURSOR_MONO 0 +#define CURSOR_24_1 1 +#define CURSOR_24_8_PRE_MULT 2 +#define CURSOR_24_8_UNPRE_MULT 3 +#define CURSOR_2X_MAGNIFY (1 << 16) +#define CURSOR_FORCE_MC_ON (1 << 20) +#define CURSOR_URGENT_CONTROL(x) (((x) & 0x7) << 24) +#define CURSOR_URGENT_ALWAYS 0 +#define CURSOR_URGENT_1_8 1 +#define CURSOR_URGENT_1_4 2 +#define CURSOR_URGENT_3_8 3 +#define CURSOR_URGENT_1_2 4 +#define CURSOR_UPDATE_PENDING (1 << 0) +#define CURSOR_UPDATE_TAKEN (1 << 1) +#define CURSOR_UPDATE_LOCK (1 << 16) +#define CURSOR_DISABLE_MULTIPLE_UPDATE (1 << 24) + +#define SI_CRTC0_REGISTER_OFFSET 0 +#define SI_CRTC1_REGISTER_OFFSET 0x300 +#define SI_CRTC2_REGISTER_OFFSET 0x2600 +#define SI_CRTC3_REGISTER_OFFSET 0x2900 +#define SI_CRTC4_REGISTER_OFFSET 0x2c00 +#define SI_CRTC5_REGISTER_OFFSET 0x2f00 + +#define DMA0_REGISTER_OFFSET 0x000 +#define DMA1_REGISTER_OFFSET 0x200 +#define ES_AND_GS_AUTO 3 +#define RADEON_PACKET_TYPE3 3 +#define CE_PARTITION_BASE 3 +#define BUF_SWAP_32BIT (2 << 16) + +#define GFX_POWER_STATUS (1 << 1) +#define GFX_CLOCK_STATUS (1 << 2) +#define GFX_LS_STATUS (1 << 3) +#define RLC_BUSY_STATUS (1 << 0) + +#define RLC_PUD(x) ((x) << 0) +#define RLC_PUD_MASK (0xff << 0) +#define RLC_PDD(x) ((x) << 8) +#define RLC_PDD_MASK (0xff << 8) +#define RLC_TTPD(x) ((x) << 16) +#define RLC_TTPD_MASK (0xff << 16) +#define RLC_MSD(x) ((x) << 24) +#define RLC_MSD_MASK (0xff << 24) +#define WRITE_DATA_ENGINE_SEL(x) ((x) << 30) +#define WRITE_DATA_DST_SEL(x) ((x) << 8) +#define EVENT_TYPE(x) ((x) << 0) +#define EVENT_INDEX(x) ((x) << 8) +#define WAIT_REG_MEM_MEM_SPACE(x) ((x) << 4) +#define WAIT_REG_MEM_FUNCTION(x) ((x) << 0) +#define WAIT_REG_MEM_ENGINE(x) ((x) << 8) + +#define GFX6_NUM_GFX_RINGS 1 +#define GFX6_NUM_COMPUTE_RINGS 2 +#define RLC_SAVE_AND_RESTORE_STARTING_OFFSET 0x90 +#define RLC_CLEAR_STATE_DESCRIPTOR_OFFSET 0x3D + +#define TAHITI_GB_ADDR_CONFIG_GOLDEN 0x12011003 +#define VERDE_GB_ADDR_CONFIG_GOLDEN 0x02010002 +#define HAINAN_GB_ADDR_CONFIG_GOLDEN 0x02011003 + +#define PACKET3(op, n) ((RADEON_PACKET_TYPE3 << 30) | \ + (((op) & 0xFF) << 8) | \ + ((n) & 0x3FFF) << 16) +#define PACKET3_COMPUTE(op, n) (PACKET3(op, n) | 1 << 1) +#define PACKET3_NOP 0x10 +#define PACKET3_SET_BASE 0x11 +#define PACKET3_BASE_INDEX(x) ((x) << 0) +#define PACKET3_CLEAR_STATE 0x12 +#define PACKET3_INDEX_BUFFER_SIZE 0x13 +#define PACKET3_DISPATCH_DIRECT 0x15 +#define PACKET3_DISPATCH_INDIRECT 0x16 +#define PACKET3_ALLOC_GDS 0x1B +#define PACKET3_WRITE_GDS_RAM 0x1C +#define PACKET3_ATOMIC_GDS 0x1D +#define PACKET3_ATOMIC 0x1E +#define PACKET3_OCCLUSION_QUERY 0x1F +#define PACKET3_SET_PREDICATION 0x20 +#define PACKET3_REG_RMW 0x21 +#define PACKET3_COND_EXEC 0x22 +#define PACKET3_PRED_EXEC 0x23 +#define PACKET3_DRAW_INDIRECT 0x24 +#define PACKET3_DRAW_INDEX_INDIRECT 0x25 +#define PACKET3_INDEX_BASE 0x26 +#define PACKET3_DRAW_INDEX_2 0x27 +#define PACKET3_CONTEXT_CONTROL 0x28 +#define PACKET3_INDEX_TYPE 0x2A +#define PACKET3_DRAW_INDIRECT_MULTI 0x2C +#define PACKET3_DRAW_INDEX_AUTO 0x2D +#define PACKET3_DRAW_INDEX_IMMD 0x2E +#define PACKET3_NUM_INSTANCES 0x2F +#define PACKET3_DRAW_INDEX_MULTI_AUTO 0x30 +#define PACKET3_INDIRECT_BUFFER_CONST 0x31 +#define PACKET3_INDIRECT_BUFFER 0x3F +#define PACKET3_STRMOUT_BUFFER_UPDATE 0x34 +#define PACKET3_DRAW_INDEX_OFFSET_2 0x35 +#define PACKET3_DRAW_INDEX_MULTI_ELEMENT 0x36 +#define PACKET3_WRITE_DATA 0x37 +#define PACKET3_DRAW_INDEX_INDIRECT_MULTI 0x38 +#define PACKET3_MEM_SEMAPHORE 0x39 +#define PACKET3_MPEG_INDEX 0x3A +#define PACKET3_COPY_DW 0x3B +#define PACKET3_WAIT_REG_MEM 0x3C +#define PACKET3_MEM_WRITE 0x3D +#define PACKET3_COPY_DATA 0x40 +#define PACKET3_CP_DMA 0x41 +# define PACKET3_CP_DMA_DST_SEL(x) ((x) << 20) +# define PACKET3_CP_DMA_ENGINE(x) ((x) << 27) +# define PACKET3_CP_DMA_SRC_SEL(x) ((x) << 29) +# define PACKET3_CP_DMA_CP_SYNC (1 << 31) +# define PACKET3_CP_DMA_DIS_WC (1 << 21) +# define PACKET3_CP_DMA_CMD_SRC_SWAP(x) ((x) << 22) +# define PACKET3_CP_DMA_CMD_DST_SWAP(x) ((x) << 24) +# define PACKET3_CP_DMA_CMD_SAS (1 << 26) +# define PACKET3_CP_DMA_CMD_DAS (1 << 27) +# define PACKET3_CP_DMA_CMD_SAIC (1 << 28) +# define PACKET3_CP_DMA_CMD_DAIC (1 << 29) +# define PACKET3_CP_DMA_CMD_RAW_WAIT (1 << 30) +#define PACKET3_PFP_SYNC_ME 0x42 +#define PACKET3_SURFACE_SYNC 0x43 +# define PACKET3_DEST_BASE_0_ENA (1 << 0) +# define PACKET3_DEST_BASE_1_ENA (1 << 1) +# define PACKET3_CB0_DEST_BASE_ENA (1 << 6) +# define PACKET3_CB1_DEST_BASE_ENA (1 << 7) +# define PACKET3_CB2_DEST_BASE_ENA (1 << 8) +# define PACKET3_CB3_DEST_BASE_ENA (1 << 9) +# define PACKET3_CB4_DEST_BASE_ENA (1 << 10) +# define PACKET3_CB5_DEST_BASE_ENA (1 << 11) +# define PACKET3_CB6_DEST_BASE_ENA (1 << 12) +# define PACKET3_CB7_DEST_BASE_ENA (1 << 13) +# define PACKET3_DB_DEST_BASE_ENA (1 << 14) +# define PACKET3_DEST_BASE_2_ENA (1 << 19) +# define PACKET3_DEST_BASE_3_ENA (1 << 21) +# define PACKET3_TCL1_ACTION_ENA (1 << 22) +# define PACKET3_TC_ACTION_ENA (1 << 23) +# define PACKET3_CB_ACTION_ENA (1 << 25) +# define PACKET3_DB_ACTION_ENA (1 << 26) +# define PACKET3_SH_KCACHE_ACTION_ENA (1 << 27) +# define PACKET3_SH_ICACHE_ACTION_ENA (1 << 29) +#define PACKET3_ME_INITIALIZE 0x44 +#define PACKET3_ME_INITIALIZE_DEVICE_ID(x) ((x) << 16) +#define PACKET3_COND_WRITE 0x45 +#define PACKET3_EVENT_WRITE 0x46 +#define PACKET3_EVENT_WRITE_EOP 0x47 +#define PACKET3_EVENT_WRITE_EOS 0x48 +#define PACKET3_PREAMBLE_CNTL 0x4A +# define PACKET3_PREAMBLE_BEGIN_CLEAR_STATE (2 << 28) +# define PACKET3_PREAMBLE_END_CLEAR_STATE (3 << 28) +#define PACKET3_ONE_REG_WRITE 0x57 +#define PACKET3_LOAD_CONFIG_REG 0x5F +#define PACKET3_LOAD_CONTEXT_REG 0x60 +#define PACKET3_LOAD_SH_REG 0x61 +#define PACKET3_SET_CONFIG_REG 0x68 +#define PACKET3_SET_CONFIG_REG_START 0x00002000 +#define PACKET3_SET_CONFIG_REG_END 0x00002c00 +#define PACKET3_SET_CONTEXT_REG 0x69 +#define PACKET3_SET_CONTEXT_REG_START 0x000a000 +#define PACKET3_SET_CONTEXT_REG_END 0x000a400 +#define PACKET3_SET_CONTEXT_REG_INDIRECT 0x73 +#define PACKET3_SET_RESOURCE_INDIRECT 0x74 +#define PACKET3_SET_SH_REG 0x76 +#define PACKET3_SET_SH_REG_START 0x00002c00 +#define PACKET3_SET_SH_REG_END 0x00003000 +#define PACKET3_SET_SH_REG_OFFSET 0x77 +#define PACKET3_ME_WRITE 0x7A +#define PACKET3_SCRATCH_RAM_WRITE 0x7D +#define PACKET3_SCRATCH_RAM_READ 0x7E +#define PACKET3_CE_WRITE 0x7F +#define PACKET3_LOAD_CONST_RAM 0x80 +#define PACKET3_WRITE_CONST_RAM 0x81 +#define PACKET3_WRITE_CONST_RAM_OFFSET 0x82 +#define PACKET3_DUMP_CONST_RAM 0x83 +#define PACKET3_INCREMENT_CE_COUNTER 0x84 +#define PACKET3_INCREMENT_DE_COUNTER 0x85 +#define PACKET3_WAIT_ON_CE_COUNTER 0x86 +#define PACKET3_WAIT_ON_DE_COUNTER 0x87 +#define PACKET3_WAIT_ON_DE_COUNTER_DIFF 0x88 +#define PACKET3_SET_CE_DE_COUNTERS 0x89 +#define PACKET3_WAIT_ON_AVAIL_BUFFER 0x8A +#define PACKET3_SWITCH_BUFFER 0x8B +#define PACKET3_SEM_WAIT_ON_SIGNAL (0x1 << 12) +#define PACKET3_SEM_SEL_SIGNAL (0x6 << 29) +#define PACKET3_SEM_SEL_WAIT (0x7 << 29) + +#endif -- cgit v1.2.3