From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c | 219 +++++++++++++++++++++++++ 1 file changed, 219 insertions(+) create mode 100644 drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c (limited to 'drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c') diff --git a/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c new file mode 100644 index 000000000..4202fadb2 --- /dev/null +++ b/drivers/gpu/drm/amd/display/dc/dce/dce_hwseq.c @@ -0,0 +1,219 @@ +/* + * Copyright 2016 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +#include "dce_hwseq.h" +#include "reg_helper.h" +#include "hw_sequencer_private.h" +#include "core_types.h" + +#define CTX \ + hws->ctx +#define REG(reg)\ + hws->regs->reg + +#undef FN +#define FN(reg_name, field_name) \ + hws->shifts->field_name, hws->masks->field_name + +void dce_enable_fe_clock(struct dce_hwseq *hws, + unsigned int fe_inst, bool enable) +{ + REG_UPDATE(DCFE_CLOCK_CONTROL[fe_inst], + DCFE_CLOCK_ENABLE, enable); +} + +void dce_pipe_control_lock(struct dc *dc, + struct pipe_ctx *pipe, + bool lock) +{ + uint32_t lock_val = lock ? 1 : 0; + uint32_t dcp_grph, scl, blnd, update_lock_mode, val; + struct dce_hwseq *hws = dc->hwseq; + + /* Not lock pipe when blank */ + if (lock && pipe->stream_res.tg->funcs->is_blanked && + pipe->stream_res.tg->funcs->is_blanked(pipe->stream_res.tg)) + return; + + val = REG_GET_4(BLND_V_UPDATE_LOCK[pipe->stream_res.tg->inst], + BLND_DCP_GRPH_V_UPDATE_LOCK, &dcp_grph, + BLND_SCL_V_UPDATE_LOCK, &scl, + BLND_BLND_V_UPDATE_LOCK, &blnd, + BLND_V_UPDATE_LOCK_MODE, &update_lock_mode); + + dcp_grph = lock_val; + scl = lock_val; + blnd = lock_val; + update_lock_mode = lock_val; + + REG_SET_2(BLND_V_UPDATE_LOCK[pipe->stream_res.tg->inst], val, + BLND_DCP_GRPH_V_UPDATE_LOCK, dcp_grph, + BLND_SCL_V_UPDATE_LOCK, scl); + + if (hws->masks->BLND_BLND_V_UPDATE_LOCK != 0) + REG_SET_2(BLND_V_UPDATE_LOCK[pipe->stream_res.tg->inst], val, + BLND_BLND_V_UPDATE_LOCK, blnd, + BLND_V_UPDATE_LOCK_MODE, update_lock_mode); + + if (hws->wa.blnd_crtc_trigger) { + if (!lock) { + uint32_t value = REG_READ(CRTC_H_BLANK_START_END[pipe->stream_res.tg->inst]); + REG_WRITE(CRTC_H_BLANK_START_END[pipe->stream_res.tg->inst], value); + } + } +} + +#if defined(CONFIG_DRM_AMD_DC_SI) +void dce60_pipe_control_lock(struct dc *dc, + struct pipe_ctx *pipe, + bool lock) +{ + /* DCE6 has no BLND_V_UPDATE_LOCK register */ +} +#endif + +void dce_set_blender_mode(struct dce_hwseq *hws, + unsigned int blnd_inst, + enum blnd_mode mode) +{ + uint32_t feedthrough = 1; + uint32_t blnd_mode = 0; + uint32_t multiplied_mode = 0; + uint32_t alpha_mode = 2; + + switch (mode) { + case BLND_MODE_OTHER_PIPE: + feedthrough = 0; + blnd_mode = 1; + alpha_mode = 0; + break; + case BLND_MODE_BLENDING: + feedthrough = 0; + blnd_mode = 2; + alpha_mode = 0; + multiplied_mode = 1; + break; + case BLND_MODE_CURRENT_PIPE: + default: + if (REG(BLND_CONTROL[blnd_inst]) == REG(BLNDV_CONTROL) || + blnd_inst == 0) + feedthrough = 0; + break; + } + + REG_UPDATE(BLND_CONTROL[blnd_inst], + BLND_MODE, blnd_mode); + + if (hws->masks->BLND_ALPHA_MODE != 0) { + REG_UPDATE_3(BLND_CONTROL[blnd_inst], + BLND_FEEDTHROUGH_EN, feedthrough, + BLND_ALPHA_MODE, alpha_mode, + BLND_MULTIPLIED_MODE, multiplied_mode); + } +} + + +static void dce_disable_sram_shut_down(struct dce_hwseq *hws) +{ + if (REG(DC_MEM_GLOBAL_PWR_REQ_CNTL)) + REG_UPDATE(DC_MEM_GLOBAL_PWR_REQ_CNTL, + DC_MEM_GLOBAL_PWR_REQ_DIS, 1); +} + +static void dce_underlay_clock_enable(struct dce_hwseq *hws) +{ + /* todo: why do we need this at boot? is dce_enable_fe_clock enough? */ + if (REG(DCFEV_CLOCK_CONTROL)) + REG_UPDATE(DCFEV_CLOCK_CONTROL, + DCFEV_CLOCK_ENABLE, 1); +} + +static void enable_hw_base_light_sleep(void) +{ + /* TODO: implement */ +} + +static void disable_sw_manual_control_light_sleep(void) +{ + /* TODO: implement */ +} + +void dce_clock_gating_power_up(struct dce_hwseq *hws, + bool enable) +{ + if (enable) { + enable_hw_base_light_sleep(); + disable_sw_manual_control_light_sleep(); + } else { + dce_disable_sram_shut_down(hws); + dce_underlay_clock_enable(hws); + } +} + +void dce_crtc_switch_to_clk_src(struct dce_hwseq *hws, + struct clock_source *clk_src, + unsigned int tg_inst) +{ + if (clk_src->id == CLOCK_SOURCE_ID_DP_DTO || clk_src->dp_clk_src) { + REG_UPDATE(PIXEL_RATE_CNTL[tg_inst], + DP_DTO0_ENABLE, 1); + + } else if (clk_src->id >= CLOCK_SOURCE_COMBO_PHY_PLL0) { + uint32_t rate_source = clk_src->id - CLOCK_SOURCE_COMBO_PHY_PLL0; + + REG_UPDATE_2(PHYPLL_PIXEL_RATE_CNTL[tg_inst], + PHYPLL_PIXEL_RATE_SOURCE, rate_source, + PIXEL_RATE_PLL_SOURCE, 0); + + REG_UPDATE(PIXEL_RATE_CNTL[tg_inst], + DP_DTO0_ENABLE, 0); + + } else if (clk_src->id <= CLOCK_SOURCE_ID_PLL2) { + uint32_t rate_source = clk_src->id - CLOCK_SOURCE_ID_PLL0; + + REG_UPDATE_2(PIXEL_RATE_CNTL[tg_inst], + PIXEL_RATE_SOURCE, rate_source, + DP_DTO0_ENABLE, 0); + + if (REG(PHYPLL_PIXEL_RATE_CNTL[tg_inst])) + REG_UPDATE(PHYPLL_PIXEL_RATE_CNTL[tg_inst], + PIXEL_RATE_PLL_SOURCE, 1); + } else { + DC_ERR("Unknown clock source. clk_src id: %d, TG_inst: %d", + clk_src->id, tg_inst); + } +} + +/* Only use LUT for 8 bit formats */ +bool dce_use_lut(enum surface_pixel_format format) +{ + switch (format) { + case SURFACE_PIXEL_FORMAT_GRPH_ARGB8888: + case SURFACE_PIXEL_FORMAT_GRPH_ABGR8888: + return true; + default: + return false; + } +} -- cgit v1.2.3