From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- .../drm/amd/display/dc/dce110/dce110_compressor.c | 471 +++++++++++++++++++++ 1 file changed, 471 insertions(+) create mode 100644 drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c (limited to 'drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c') diff --git a/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c b/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c new file mode 100644 index 000000000..d241ee13b --- /dev/null +++ b/drivers/gpu/drm/amd/display/dc/dce110/dce110_compressor.c @@ -0,0 +1,471 @@ +/* + * Copyright 2012-15 Advanced Micro Devices, Inc. + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + * + * Authors: AMD + * + */ + +#include "dm_services.h" + +#include "dce/dce_11_0_d.h" +#include "dce/dce_11_0_sh_mask.h" +#include "gmc/gmc_8_2_sh_mask.h" +#include "gmc/gmc_8_2_d.h" + +#include "include/logger_interface.h" + +#include "dce110_compressor.h" + +#define DC_LOGGER \ + cp110->base.ctx->logger +#define DCP_REG(reg)\ + (reg + cp110->offsets.dcp_offset) +#define DMIF_REG(reg)\ + (reg + cp110->offsets.dmif_offset) + +static const struct dce110_compressor_reg_offsets reg_offsets[] = { +{ + .dcp_offset = (mmDCP0_GRPH_CONTROL - mmDCP0_GRPH_CONTROL), + .dmif_offset = + (mmDMIF_PG0_DPG_PIPE_DPM_CONTROL + - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL), +}, +{ + .dcp_offset = (mmDCP1_GRPH_CONTROL - mmDCP0_GRPH_CONTROL), + .dmif_offset = + (mmDMIF_PG1_DPG_PIPE_DPM_CONTROL + - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL), +}, +{ + .dcp_offset = (mmDCP2_GRPH_CONTROL - mmDCP0_GRPH_CONTROL), + .dmif_offset = + (mmDMIF_PG2_DPG_PIPE_DPM_CONTROL + - mmDMIF_PG0_DPG_PIPE_DPM_CONTROL), +} +}; + +static uint32_t align_to_chunks_number_per_line(uint32_t pixels) +{ + return 256 * ((pixels + 255) / 256); +} + +static void reset_lb_on_vblank(struct compressor *compressor, uint32_t crtc_inst) +{ + uint32_t value; + uint32_t frame_count; + uint32_t status_pos; + uint32_t retry = 0; + struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor); + + cp110->offsets = reg_offsets[crtc_inst]; + + status_pos = dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_POSITION)); + + + /* Only if CRTC is enabled and counter is moving we wait for one frame. */ + if (status_pos != dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_POSITION))) { + /* Resetting LB on VBlank */ + value = dm_read_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL)); + set_reg_field_value(value, 3, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL); + set_reg_field_value(value, 1, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL2); + dm_write_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL), value); + + frame_count = dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_FRAME_COUNT)); + + + for (retry = 10000; retry > 0; retry--) { + if (frame_count != dm_read_reg(compressor->ctx, DCP_REG(mmCRTC_STATUS_FRAME_COUNT))) + break; + udelay(10); + } + if (!retry) + dm_error("Frame count did not increase for 100ms.\n"); + + /* Resetting LB on VBlank */ + value = dm_read_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL)); + set_reg_field_value(value, 2, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL); + set_reg_field_value(value, 0, LB_SYNC_RESET_SEL, LB_SYNC_RESET_SEL2); + dm_write_reg(compressor->ctx, DCP_REG(mmLB_SYNC_RESET_SEL), value); + } +} + +static void wait_for_fbc_state_changed( + struct dce110_compressor *cp110, + bool enabled) +{ + uint32_t counter = 0; + uint32_t addr = mmFBC_STATUS; + uint32_t value; + + while (counter < 1000) { + value = dm_read_reg(cp110->base.ctx, addr); + if (get_reg_field_value( + value, + FBC_STATUS, + FBC_ENABLE_STATUS) == enabled) + break; + udelay(100); + counter++; + } + + if (counter == 1000) { + DC_LOG_WARNING("%s: wait counter exceeded, changes to HW not applied", + __func__); + } else { + DC_LOG_SYNC("FBC status changed to %d", enabled); + } + + +} + +void dce110_compressor_power_up_fbc(struct compressor *compressor) +{ + uint32_t value; + uint32_t addr; + + addr = mmFBC_CNTL; + value = dm_read_reg(compressor->ctx, addr); + set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN); + set_reg_field_value(value, 1, FBC_CNTL, FBC_EN); + set_reg_field_value(value, 2, FBC_CNTL, FBC_COHERENCY_MODE); + if (compressor->options.bits.CLK_GATING_DISABLED == 1) { + /* HW needs to do power measurement comparison. */ + set_reg_field_value( + value, + 0, + FBC_CNTL, + FBC_COMP_CLK_GATE_EN); + } + dm_write_reg(compressor->ctx, addr, value); + + addr = mmFBC_COMP_MODE; + value = dm_read_reg(compressor->ctx, addr); + set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_RLE_EN); + set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_DPCM4_RGB_EN); + set_reg_field_value(value, 1, FBC_COMP_MODE, FBC_IND_EN); + dm_write_reg(compressor->ctx, addr, value); + + addr = mmFBC_COMP_CNTL; + value = dm_read_reg(compressor->ctx, addr); + set_reg_field_value(value, 1, FBC_COMP_CNTL, FBC_DEPTH_RGB08_EN); + dm_write_reg(compressor->ctx, addr, value); + /*FBC_MIN_COMPRESSION 0 ==> 2:1 */ + /* 1 ==> 4:1 */ + /* 2 ==> 8:1 */ + /* 0xF ==> 1:1 */ + set_reg_field_value(value, 0xF, FBC_COMP_CNTL, FBC_MIN_COMPRESSION); + dm_write_reg(compressor->ctx, addr, value); + compressor->min_compress_ratio = FBC_COMPRESS_RATIO_1TO1; + + value = 0; + dm_write_reg(compressor->ctx, mmFBC_IND_LUT0, value); + + value = 0xFFFFFF; + dm_write_reg(compressor->ctx, mmFBC_IND_LUT1, value); +} + +void dce110_compressor_enable_fbc( + struct compressor *compressor, + struct compr_addr_and_pitch_params *params) +{ + struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor); + + if (compressor->options.bits.FBC_SUPPORT && + (!dce110_compressor_is_fbc_enabled_in_hw(compressor, NULL))) { + + uint32_t addr; + uint32_t value, misc_value; + + addr = mmFBC_CNTL; + value = dm_read_reg(compressor->ctx, addr); + set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN); + /* params->inst is valid HW CRTC instance start from 0 */ + set_reg_field_value( + value, + params->inst, + FBC_CNTL, FBC_SRC_SEL); + dm_write_reg(compressor->ctx, addr, value); + + /* Keep track of enum controller_id FBC is attached to */ + compressor->is_enabled = true; + /* attached_inst is SW CRTC instance start from 1 + * 0 = CONTROLLER_ID_UNDEFINED means not attached crtc + */ + compressor->attached_inst = params->inst + CONTROLLER_ID_D0; + + /* Toggle it as there is bug in HW */ + set_reg_field_value(value, 0, FBC_CNTL, FBC_GRPH_COMP_EN); + dm_write_reg(compressor->ctx, addr, value); + + /* FBC usage with scatter & gather for dce110 */ + misc_value = dm_read_reg(compressor->ctx, mmFBC_MISC); + + set_reg_field_value(misc_value, 1, + FBC_MISC, FBC_INVALIDATE_ON_ERROR); + set_reg_field_value(misc_value, 1, + FBC_MISC, FBC_DECOMPRESS_ERROR_CLEAR); + set_reg_field_value(misc_value, 0x14, + FBC_MISC, FBC_SLOW_REQ_INTERVAL); + + dm_write_reg(compressor->ctx, mmFBC_MISC, misc_value); + + /* Enable FBC */ + set_reg_field_value(value, 1, FBC_CNTL, FBC_GRPH_COMP_EN); + dm_write_reg(compressor->ctx, addr, value); + + wait_for_fbc_state_changed(cp110, true); + } +} + +void dce110_compressor_disable_fbc(struct compressor *compressor) +{ + struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor); + uint32_t crtc_inst = 0; + + if (compressor->options.bits.FBC_SUPPORT) { + if (dce110_compressor_is_fbc_enabled_in_hw(compressor, &crtc_inst)) { + uint32_t reg_data; + /* Turn off compression */ + reg_data = dm_read_reg(compressor->ctx, mmFBC_CNTL); + set_reg_field_value(reg_data, 0, FBC_CNTL, FBC_GRPH_COMP_EN); + dm_write_reg(compressor->ctx, mmFBC_CNTL, reg_data); + + /* Reset enum controller_id to undefined */ + compressor->attached_inst = 0; + compressor->is_enabled = false; + + wait_for_fbc_state_changed(cp110, false); + } + + /* Sync line buffer which fbc was attached to dce100/110 only */ + if (crtc_inst > CONTROLLER_ID_UNDEFINED && crtc_inst < CONTROLLER_ID_D3) + reset_lb_on_vblank(compressor, + crtc_inst - CONTROLLER_ID_D0); + } +} + +bool dce110_compressor_is_fbc_enabled_in_hw( + struct compressor *compressor, + uint32_t *inst) +{ + /* Check the hardware register */ + uint32_t value; + + value = dm_read_reg(compressor->ctx, mmFBC_STATUS); + if (get_reg_field_value(value, FBC_STATUS, FBC_ENABLE_STATUS)) { + if (inst != NULL) + *inst = compressor->attached_inst; + return true; + } + + value = dm_read_reg(compressor->ctx, mmFBC_MISC); + if (get_reg_field_value(value, FBC_MISC, FBC_STOP_ON_HFLIP_EVENT)) { + value = dm_read_reg(compressor->ctx, mmFBC_CNTL); + + if (get_reg_field_value(value, FBC_CNTL, FBC_GRPH_COMP_EN)) { + if (inst != NULL) + *inst = + compressor->attached_inst; + return true; + } + } + return false; +} + + +void dce110_compressor_program_compressed_surface_address_and_pitch( + struct compressor *compressor, + struct compr_addr_and_pitch_params *params) +{ + struct dce110_compressor *cp110 = TO_DCE110_COMPRESSOR(compressor); + uint32_t value = 0; + uint32_t fbc_pitch = 0; + uint32_t compressed_surf_address_low_part = + compressor->compr_surface_address.addr.low_part; + + cp110->offsets = reg_offsets[params->inst]; + + /* Clear content first. */ + dm_write_reg( + compressor->ctx, + DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH), + 0); + dm_write_reg(compressor->ctx, + DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS), 0); + + /* Write address, HIGH has to be first. */ + dm_write_reg(compressor->ctx, + DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS_HIGH), + compressor->compr_surface_address.addr.high_part); + dm_write_reg(compressor->ctx, + DCP_REG(mmGRPH_COMPRESS_SURFACE_ADDRESS), + compressed_surf_address_low_part); + + fbc_pitch = align_to_chunks_number_per_line(params->source_view_width); + + if (compressor->min_compress_ratio == FBC_COMPRESS_RATIO_1TO1) + fbc_pitch = fbc_pitch / 8; + else + DC_LOG_WARNING("%s: Unexpected DCE11 compression ratio", + __func__); + + /* Clear content first. */ + dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), 0); + + /* Write FBC Pitch. */ + set_reg_field_value( + value, + fbc_pitch, + GRPH_COMPRESS_PITCH, + GRPH_COMPRESS_PITCH); + dm_write_reg(compressor->ctx, DCP_REG(mmGRPH_COMPRESS_PITCH), value); + +} + +void dce110_compressor_set_fbc_invalidation_triggers( + struct compressor *compressor, + uint32_t fbc_trigger) +{ + /* Disable region hit event, FBC_MEMORY_REGION_MASK = 0 (bits 16-19) + * for DCE 11 regions cannot be used - does not work with S/G + */ + uint32_t addr = mmFBC_CLIENT_REGION_MASK; + uint32_t value = dm_read_reg(compressor->ctx, addr); + + set_reg_field_value( + value, + 0, + FBC_CLIENT_REGION_MASK, + FBC_MEMORY_REGION_MASK); + dm_write_reg(compressor->ctx, addr, value); + + /* Setup events when to clear all CSM entries (effectively marking + * current compressed data invalid) + * For DCE 11 CSM metadata 11111 means - "Not Compressed" + * Used as the initial value of the metadata sent to the compressor + * after invalidation, to indicate that the compressor should attempt + * to compress all chunks on the current pass. Also used when the chunk + * is not successfully written to memory. + * When this CSM value is detected, FBC reads from the uncompressed + * buffer. Set events according to passed in value, these events are + * valid for DCE11: + * - bit 0 - display register updated + * - bit 28 - memory write from any client except from MCIF + * - bit 29 - CG static screen signal is inactive + * In addition, DCE11.1 also needs to set new DCE11.1 specific events + * that are used to trigger invalidation on certain register changes, + * for example enabling of Alpha Compression may trigger invalidation of + * FBC once bit is set. These events are as follows: + * - Bit 2 - FBC_GRPH_COMP_EN register updated + * - Bit 3 - FBC_SRC_SEL register updated + * - Bit 4 - FBC_MIN_COMPRESSION register updated + * - Bit 5 - FBC_ALPHA_COMP_EN register updated + * - Bit 6 - FBC_ZERO_ALPHA_CHUNK_SKIP_EN register updated + * - Bit 7 - FBC_FORCE_COPY_TO_COMP_BUF register updated + */ + addr = mmFBC_IDLE_FORCE_CLEAR_MASK; + value = dm_read_reg(compressor->ctx, addr); + set_reg_field_value( + value, + fbc_trigger, + FBC_IDLE_FORCE_CLEAR_MASK, + FBC_IDLE_FORCE_CLEAR_MASK); + dm_write_reg(compressor->ctx, addr, value); +} + +struct compressor *dce110_compressor_create(struct dc_context *ctx) +{ + struct dce110_compressor *cp110 = + kzalloc(sizeof(struct dce110_compressor), GFP_KERNEL); + + if (!cp110) + return NULL; + + dce110_compressor_construct(cp110, ctx); + return &cp110->base; +} + +void dce110_compressor_destroy(struct compressor **compressor) +{ + kfree(TO_DCE110_COMPRESSOR(*compressor)); + *compressor = NULL; +} + +void get_max_support_fbc_buffersize(unsigned int *max_x, unsigned int *max_y) +{ + *max_x = FBC_MAX_X; + *max_y = FBC_MAX_Y; + + /* if (m_smallLocalFrameBufferMemory == 1) + * { + * *max_x = FBC_MAX_X_SG; + * *max_y = FBC_MAX_Y_SG; + * } + */ +} + +static const struct compressor_funcs dce110_compressor_funcs = { + .power_up_fbc = dce110_compressor_power_up_fbc, + .enable_fbc = dce110_compressor_enable_fbc, + .disable_fbc = dce110_compressor_disable_fbc, + .set_fbc_invalidation_triggers = dce110_compressor_set_fbc_invalidation_triggers, + .surface_address_and_pitch = dce110_compressor_program_compressed_surface_address_and_pitch, + .is_fbc_enabled_in_hw = dce110_compressor_is_fbc_enabled_in_hw +}; + + +void dce110_compressor_construct(struct dce110_compressor *compressor, + struct dc_context *ctx) +{ + + compressor->base.options.raw = 0; + compressor->base.options.bits.FBC_SUPPORT = true; + + /* for dce 11 always use one dram channel for lpt */ + compressor->base.lpt_channels_num = 1; + compressor->base.options.bits.DUMMY_BACKEND = false; + + /* + * check if this system has more than 1 dram channel; if only 1 then lpt + * should not be supported + */ + + + compressor->base.options.bits.CLK_GATING_DISABLED = false; + + compressor->base.ctx = ctx; + compressor->base.embedded_panel_h_size = 0; + compressor->base.embedded_panel_v_size = 0; + compressor->base.memory_bus_width = ctx->asic_id.vram_width; + compressor->base.allocated_size = 0; + compressor->base.preferred_requested_size = 0; + compressor->base.min_compress_ratio = FBC_COMPRESS_RATIO_INVALID; + compressor->base.banks_num = 0; + compressor->base.raw_size = 0; + compressor->base.channel_interleave_size = 0; + compressor->base.dram_channels_num = 0; + compressor->base.lpt_channels_num = 0; + compressor->base.attached_inst = CONTROLLER_ID_UNDEFINED; + compressor->base.is_enabled = false; + compressor->base.funcs = &dce110_compressor_funcs; + +} + -- cgit v1.2.3