From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c | 843 +++++++++++++++++++++++++++ 1 file changed, 843 insertions(+) create mode 100644 drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c (limited to 'drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c') diff --git a/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c new file mode 100644 index 000000000..a2bb5b916 --- /dev/null +++ b/drivers/gpu/drm/atmel-hlcdc/atmel_hlcdc_dc.c @@ -0,0 +1,843 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * Copyright (C) 2014 Traphandler + * Copyright (C) 2014 Free Electrons + * Copyright (C) 2014 Atmel + * + * Author: Jean-Jacques Hiblot + * Author: Boris BREZILLON + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "atmel_hlcdc_dc.h" + +#define ATMEL_HLCDC_LAYER_IRQS_OFFSET 8 + +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9n12_layers[] = { + { + .name = "base", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x40, + .id = 0, + .type = ATMEL_HLCDC_BASE_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .xstride = { 2 }, + .default_color = 3, + .general_config = 4, + }, + .clut_offset = 0x400, + }, +}; + +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9n12 = { + .min_width = 0, + .min_height = 0, + .max_width = 1280, + .max_height = 860, + .max_spw = 0x3f, + .max_vpw = 0x3f, + .max_hpw = 0xff, + .conflicting_output_formats = true, + .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9n12_layers), + .layers = atmel_hlcdc_at91sam9n12_layers, +}; + +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_at91sam9x5_layers[] = { + { + .name = "base", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x40, + .id = 0, + .type = ATMEL_HLCDC_BASE_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .xstride = { 2 }, + .default_color = 3, + .general_config = 4, + .disc_pos = 5, + .disc_size = 6, + }, + .clut_offset = 0x400, + }, + { + .name = "overlay1", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x100, + .id = 1, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0x800, + }, + { + .name = "high-end-overlay", + .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, + .regs_offset = 0x280, + .id = 2, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x4c, + .layout = { + .pos = 2, + .size = 3, + .memsize = 4, + .xstride = { 5, 7 }, + .pstride = { 6, 8 }, + .default_color = 9, + .chroma_key = 10, + .chroma_key_mask = 11, + .general_config = 12, + .scaler_config = 13, + .csc = 14, + }, + .clut_offset = 0x1000, + }, + { + .name = "cursor", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x340, + .id = 3, + .type = ATMEL_HLCDC_CURSOR_LAYER, + .max_width = 128, + .max_height = 128, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0x1400, + }, +}; + +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_at91sam9x5 = { + .min_width = 0, + .min_height = 0, + .max_width = 800, + .max_height = 600, + .max_spw = 0x3f, + .max_vpw = 0x3f, + .max_hpw = 0xff, + .conflicting_output_formats = true, + .nlayers = ARRAY_SIZE(atmel_hlcdc_at91sam9x5_layers), + .layers = atmel_hlcdc_at91sam9x5_layers, +}; + +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d3_layers[] = { + { + .name = "base", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x40, + .id = 0, + .type = ATMEL_HLCDC_BASE_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .xstride = { 2 }, + .default_color = 3, + .general_config = 4, + .disc_pos = 5, + .disc_size = 6, + }, + .clut_offset = 0x600, + }, + { + .name = "overlay1", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x140, + .id = 1, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xa00, + }, + { + .name = "overlay2", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x240, + .id = 2, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xe00, + }, + { + .name = "high-end-overlay", + .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, + .regs_offset = 0x340, + .id = 3, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x4c, + .layout = { + .pos = 2, + .size = 3, + .memsize = 4, + .xstride = { 5, 7 }, + .pstride = { 6, 8 }, + .default_color = 9, + .chroma_key = 10, + .chroma_key_mask = 11, + .general_config = 12, + .scaler_config = 13, + .phicoeffs = { + .x = 17, + .y = 33, + }, + .csc = 14, + }, + .clut_offset = 0x1200, + }, + { + .name = "cursor", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x440, + .id = 4, + .type = ATMEL_HLCDC_CURSOR_LAYER, + .max_width = 128, + .max_height = 128, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + .scaler_config = 13, + }, + .clut_offset = 0x1600, + }, +}; + +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d3 = { + .min_width = 0, + .min_height = 0, + .max_width = 2048, + .max_height = 2048, + .max_spw = 0x3f, + .max_vpw = 0x3f, + .max_hpw = 0x1ff, + .conflicting_output_formats = true, + .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d3_layers), + .layers = atmel_hlcdc_sama5d3_layers, +}; + +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sama5d4_layers[] = { + { + .name = "base", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x40, + .id = 0, + .type = ATMEL_HLCDC_BASE_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .xstride = { 2 }, + .default_color = 3, + .general_config = 4, + .disc_pos = 5, + .disc_size = 6, + }, + .clut_offset = 0x600, + }, + { + .name = "overlay1", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x140, + .id = 1, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xa00, + }, + { + .name = "overlay2", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x240, + .id = 2, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xe00, + }, + { + .name = "high-end-overlay", + .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, + .regs_offset = 0x340, + .id = 3, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x4c, + .layout = { + .pos = 2, + .size = 3, + .memsize = 4, + .xstride = { 5, 7 }, + .pstride = { 6, 8 }, + .default_color = 9, + .chroma_key = 10, + .chroma_key_mask = 11, + .general_config = 12, + .scaler_config = 13, + .phicoeffs = { + .x = 17, + .y = 33, + }, + .csc = 14, + }, + .clut_offset = 0x1200, + }, +}; + +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sama5d4 = { + .min_width = 0, + .min_height = 0, + .max_width = 2048, + .max_height = 2048, + .max_spw = 0xff, + .max_vpw = 0xff, + .max_hpw = 0x3ff, + .nlayers = ARRAY_SIZE(atmel_hlcdc_sama5d4_layers), + .layers = atmel_hlcdc_sama5d4_layers, +}; + +static const struct atmel_hlcdc_layer_desc atmel_hlcdc_sam9x60_layers[] = { + { + .name = "base", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x60, + .id = 0, + .type = ATMEL_HLCDC_BASE_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .xstride = { 2 }, + .default_color = 3, + .general_config = 4, + .disc_pos = 5, + .disc_size = 6, + }, + .clut_offset = 0x600, + }, + { + .name = "overlay1", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x160, + .id = 1, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xa00, + }, + { + .name = "overlay2", + .formats = &atmel_hlcdc_plane_rgb_formats, + .regs_offset = 0x260, + .id = 2, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x2c, + .layout = { + .pos = 2, + .size = 3, + .xstride = { 4 }, + .pstride = { 5 }, + .default_color = 6, + .chroma_key = 7, + .chroma_key_mask = 8, + .general_config = 9, + }, + .clut_offset = 0xe00, + }, + { + .name = "high-end-overlay", + .formats = &atmel_hlcdc_plane_rgb_and_yuv_formats, + .regs_offset = 0x360, + .id = 3, + .type = ATMEL_HLCDC_OVERLAY_LAYER, + .cfgs_offset = 0x4c, + .layout = { + .pos = 2, + .size = 3, + .memsize = 4, + .xstride = { 5, 7 }, + .pstride = { 6, 8 }, + .default_color = 9, + .chroma_key = 10, + .chroma_key_mask = 11, + .general_config = 12, + .scaler_config = 13, + .phicoeffs = { + .x = 17, + .y = 33, + }, + .csc = 14, + }, + .clut_offset = 0x1200, + }, +}; + +static const struct atmel_hlcdc_dc_desc atmel_hlcdc_dc_sam9x60 = { + .min_width = 0, + .min_height = 0, + .max_width = 2048, + .max_height = 2048, + .max_spw = 0xff, + .max_vpw = 0xff, + .max_hpw = 0x3ff, + .fixed_clksrc = true, + .nlayers = ARRAY_SIZE(atmel_hlcdc_sam9x60_layers), + .layers = atmel_hlcdc_sam9x60_layers, +}; + +static const struct of_device_id atmel_hlcdc_of_match[] = { + { + .compatible = "atmel,at91sam9n12-hlcdc", + .data = &atmel_hlcdc_dc_at91sam9n12, + }, + { + .compatible = "atmel,at91sam9x5-hlcdc", + .data = &atmel_hlcdc_dc_at91sam9x5, + }, + { + .compatible = "atmel,sama5d2-hlcdc", + .data = &atmel_hlcdc_dc_sama5d4, + }, + { + .compatible = "atmel,sama5d3-hlcdc", + .data = &atmel_hlcdc_dc_sama5d3, + }, + { + .compatible = "atmel,sama5d4-hlcdc", + .data = &atmel_hlcdc_dc_sama5d4, + }, + { + .compatible = "microchip,sam9x60-hlcdc", + .data = &atmel_hlcdc_dc_sam9x60, + }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, atmel_hlcdc_of_match); + +enum drm_mode_status +atmel_hlcdc_dc_mode_valid(struct atmel_hlcdc_dc *dc, + const struct drm_display_mode *mode) +{ + int vfront_porch = mode->vsync_start - mode->vdisplay; + int vback_porch = mode->vtotal - mode->vsync_end; + int vsync_len = mode->vsync_end - mode->vsync_start; + int hfront_porch = mode->hsync_start - mode->hdisplay; + int hback_porch = mode->htotal - mode->hsync_end; + int hsync_len = mode->hsync_end - mode->hsync_start; + + if (hsync_len > dc->desc->max_spw + 1 || hsync_len < 1) + return MODE_HSYNC; + + if (vsync_len > dc->desc->max_spw + 1 || vsync_len < 1) + return MODE_VSYNC; + + if (hfront_porch > dc->desc->max_hpw + 1 || hfront_porch < 1 || + hback_porch > dc->desc->max_hpw + 1 || hback_porch < 1 || + mode->hdisplay < 1) + return MODE_H_ILLEGAL; + + if (vfront_porch > dc->desc->max_vpw + 1 || vfront_porch < 1 || + vback_porch > dc->desc->max_vpw || vback_porch < 0 || + mode->vdisplay < 1) + return MODE_V_ILLEGAL; + + return MODE_OK; +} + +static void atmel_hlcdc_layer_irq(struct atmel_hlcdc_layer *layer) +{ + if (!layer) + return; + + if (layer->desc->type == ATMEL_HLCDC_BASE_LAYER || + layer->desc->type == ATMEL_HLCDC_OVERLAY_LAYER || + layer->desc->type == ATMEL_HLCDC_CURSOR_LAYER) + atmel_hlcdc_plane_irq(atmel_hlcdc_layer_to_plane(layer)); +} + +static irqreturn_t atmel_hlcdc_dc_irq_handler(int irq, void *data) +{ + struct drm_device *dev = data; + struct atmel_hlcdc_dc *dc = dev->dev_private; + unsigned long status; + unsigned int imr, isr; + int i; + + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_IMR, &imr); + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr); + status = imr & isr; + if (!status) + return IRQ_NONE; + + if (status & ATMEL_HLCDC_SOF) + atmel_hlcdc_crtc_irq(dc->crtc); + + for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) { + if (ATMEL_HLCDC_LAYER_STATUS(i) & status) + atmel_hlcdc_layer_irq(dc->layers[i]); + } + + return IRQ_HANDLED; +} + +static void atmel_hlcdc_dc_irq_postinstall(struct drm_device *dev) +{ + struct atmel_hlcdc_dc *dc = dev->dev_private; + unsigned int cfg = 0; + int i; + + /* Enable interrupts on activated layers */ + for (i = 0; i < ATMEL_HLCDC_MAX_LAYERS; i++) { + if (dc->layers[i]) + cfg |= ATMEL_HLCDC_LAYER_STATUS(i); + } + + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, cfg); +} + +static void atmel_hlcdc_dc_irq_disable(struct drm_device *dev) +{ + struct atmel_hlcdc_dc *dc = dev->dev_private; + unsigned int isr; + + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IDR, 0xffffffff); + regmap_read(dc->hlcdc->regmap, ATMEL_HLCDC_ISR, &isr); +} + +static int atmel_hlcdc_dc_irq_install(struct drm_device *dev, unsigned int irq) +{ + int ret; + + atmel_hlcdc_dc_irq_disable(dev); + + ret = devm_request_irq(dev->dev, irq, atmel_hlcdc_dc_irq_handler, 0, + dev->driver->name, dev); + if (ret) + return ret; + + atmel_hlcdc_dc_irq_postinstall(dev); + + return 0; +} + +static void atmel_hlcdc_dc_irq_uninstall(struct drm_device *dev) +{ + atmel_hlcdc_dc_irq_disable(dev); +} + +static const struct drm_mode_config_funcs mode_config_funcs = { + .fb_create = drm_gem_fb_create, + .atomic_check = drm_atomic_helper_check, + .atomic_commit = drm_atomic_helper_commit, +}; + +static int atmel_hlcdc_dc_modeset_init(struct drm_device *dev) +{ + struct atmel_hlcdc_dc *dc = dev->dev_private; + int ret; + + drm_mode_config_init(dev); + + ret = atmel_hlcdc_create_outputs(dev); + if (ret) { + dev_err(dev->dev, "failed to create HLCDC outputs: %d\n", ret); + return ret; + } + + ret = atmel_hlcdc_create_planes(dev); + if (ret) { + dev_err(dev->dev, "failed to create planes: %d\n", ret); + return ret; + } + + ret = atmel_hlcdc_crtc_create(dev); + if (ret) { + dev_err(dev->dev, "failed to create crtc\n"); + return ret; + } + + dev->mode_config.min_width = dc->desc->min_width; + dev->mode_config.min_height = dc->desc->min_height; + dev->mode_config.max_width = dc->desc->max_width; + dev->mode_config.max_height = dc->desc->max_height; + dev->mode_config.funcs = &mode_config_funcs; + dev->mode_config.async_page_flip = true; + + return 0; +} + +static int atmel_hlcdc_dc_load(struct drm_device *dev) +{ + struct platform_device *pdev = to_platform_device(dev->dev); + const struct of_device_id *match; + struct atmel_hlcdc_dc *dc; + int ret; + + match = of_match_node(atmel_hlcdc_of_match, dev->dev->parent->of_node); + if (!match) { + dev_err(&pdev->dev, "invalid compatible string\n"); + return -ENODEV; + } + + if (!match->data) { + dev_err(&pdev->dev, "invalid hlcdc description\n"); + return -EINVAL; + } + + dc = devm_kzalloc(dev->dev, sizeof(*dc), GFP_KERNEL); + if (!dc) + return -ENOMEM; + + dc->desc = match->data; + dc->hlcdc = dev_get_drvdata(dev->dev->parent); + dev->dev_private = dc; + + ret = clk_prepare_enable(dc->hlcdc->periph_clk); + if (ret) { + dev_err(dev->dev, "failed to enable periph_clk\n"); + return ret; + } + + pm_runtime_enable(dev->dev); + + ret = drm_vblank_init(dev, 1); + if (ret < 0) { + dev_err(dev->dev, "failed to initialize vblank\n"); + goto err_periph_clk_disable; + } + + ret = atmel_hlcdc_dc_modeset_init(dev); + if (ret < 0) { + dev_err(dev->dev, "failed to initialize mode setting\n"); + goto err_periph_clk_disable; + } + + drm_mode_config_reset(dev); + + pm_runtime_get_sync(dev->dev); + ret = atmel_hlcdc_dc_irq_install(dev, dc->hlcdc->irq); + pm_runtime_put_sync(dev->dev); + if (ret < 0) { + dev_err(dev->dev, "failed to install IRQ handler\n"); + goto err_periph_clk_disable; + } + + platform_set_drvdata(pdev, dev); + + drm_kms_helper_poll_init(dev); + + return 0; + +err_periph_clk_disable: + pm_runtime_disable(dev->dev); + clk_disable_unprepare(dc->hlcdc->periph_clk); + + return ret; +} + +static void atmel_hlcdc_dc_unload(struct drm_device *dev) +{ + struct atmel_hlcdc_dc *dc = dev->dev_private; + + drm_kms_helper_poll_fini(dev); + drm_atomic_helper_shutdown(dev); + drm_mode_config_cleanup(dev); + + pm_runtime_get_sync(dev->dev); + atmel_hlcdc_dc_irq_uninstall(dev); + pm_runtime_put_sync(dev->dev); + + dev->dev_private = NULL; + + pm_runtime_disable(dev->dev); + clk_disable_unprepare(dc->hlcdc->periph_clk); +} + +DEFINE_DRM_GEM_DMA_FOPS(fops); + +static const struct drm_driver atmel_hlcdc_dc_driver = { + .driver_features = DRIVER_GEM | DRIVER_MODESET | DRIVER_ATOMIC, + DRM_GEM_DMA_DRIVER_OPS, + .fops = &fops, + .name = "atmel-hlcdc", + .desc = "Atmel HLCD Controller DRM", + .date = "20141504", + .major = 1, + .minor = 0, +}; + +static int atmel_hlcdc_dc_drm_probe(struct platform_device *pdev) +{ + struct drm_device *ddev; + int ret; + + ddev = drm_dev_alloc(&atmel_hlcdc_dc_driver, &pdev->dev); + if (IS_ERR(ddev)) + return PTR_ERR(ddev); + + ret = atmel_hlcdc_dc_load(ddev); + if (ret) + goto err_put; + + ret = drm_dev_register(ddev, 0); + if (ret) + goto err_unload; + + drm_fbdev_generic_setup(ddev, 24); + + return 0; + +err_unload: + atmel_hlcdc_dc_unload(ddev); + +err_put: + drm_dev_put(ddev); + + return ret; +} + +static int atmel_hlcdc_dc_drm_remove(struct platform_device *pdev) +{ + struct drm_device *ddev = platform_get_drvdata(pdev); + + drm_dev_unregister(ddev); + atmel_hlcdc_dc_unload(ddev); + drm_dev_put(ddev); + + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int atmel_hlcdc_dc_drm_suspend(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + struct atmel_hlcdc_dc *dc = drm_dev->dev_private; + struct regmap *regmap = dc->hlcdc->regmap; + struct drm_atomic_state *state; + + state = drm_atomic_helper_suspend(drm_dev); + if (IS_ERR(state)) + return PTR_ERR(state); + + dc->suspend.state = state; + + regmap_read(regmap, ATMEL_HLCDC_IMR, &dc->suspend.imr); + regmap_write(regmap, ATMEL_HLCDC_IDR, dc->suspend.imr); + clk_disable_unprepare(dc->hlcdc->periph_clk); + + return 0; +} + +static int atmel_hlcdc_dc_drm_resume(struct device *dev) +{ + struct drm_device *drm_dev = dev_get_drvdata(dev); + struct atmel_hlcdc_dc *dc = drm_dev->dev_private; + + clk_prepare_enable(dc->hlcdc->periph_clk); + regmap_write(dc->hlcdc->regmap, ATMEL_HLCDC_IER, dc->suspend.imr); + + return drm_atomic_helper_resume(drm_dev, dc->suspend.state); +} +#endif + +static SIMPLE_DEV_PM_OPS(atmel_hlcdc_dc_drm_pm_ops, + atmel_hlcdc_dc_drm_suspend, atmel_hlcdc_dc_drm_resume); + +static const struct of_device_id atmel_hlcdc_dc_of_match[] = { + { .compatible = "atmel,hlcdc-display-controller" }, + { }, +}; + +static struct platform_driver atmel_hlcdc_dc_platform_driver = { + .probe = atmel_hlcdc_dc_drm_probe, + .remove = atmel_hlcdc_dc_drm_remove, + .driver = { + .name = "atmel-hlcdc-display-controller", + .pm = &atmel_hlcdc_dc_drm_pm_ops, + .of_match_table = atmel_hlcdc_dc_of_match, + }, +}; +drm_module_platform_driver(atmel_hlcdc_dc_platform_driver); + +MODULE_AUTHOR("Jean-Jacques Hiblot "); +MODULE_AUTHOR("Boris Brezillon "); +MODULE_DESCRIPTION("Atmel HLCDC Display Controller DRM Driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:atmel-hlcdc-dc"); -- cgit v1.2.3