From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/bridge/nxp-ptn3460.c | 350 +++++++++++++++++++++++++++++++++++ 1 file changed, 350 insertions(+) create mode 100644 drivers/gpu/drm/bridge/nxp-ptn3460.c (limited to 'drivers/gpu/drm/bridge/nxp-ptn3460.c') diff --git a/drivers/gpu/drm/bridge/nxp-ptn3460.c b/drivers/gpu/drm/bridge/nxp-ptn3460.c new file mode 100644 index 000000000..0851101a8 --- /dev/null +++ b/drivers/gpu/drm/bridge/nxp-ptn3460.c @@ -0,0 +1,350 @@ +// SPDX-License-Identifier: GPL-2.0-only +/* + * NXP PTN3460 DP/LVDS bridge driver + * + * Copyright (C) 2013 Google, Inc. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define PTN3460_EDID_ADDR 0x0 +#define PTN3460_EDID_EMULATION_ADDR 0x84 +#define PTN3460_EDID_ENABLE_EMULATION 0 +#define PTN3460_EDID_EMULATION_SELECTION 1 +#define PTN3460_EDID_SRAM_LOAD_ADDR 0x85 + +struct ptn3460_bridge { + struct drm_connector connector; + struct i2c_client *client; + struct drm_bridge bridge; + struct drm_bridge *panel_bridge; + struct gpio_desc *gpio_pd_n; + struct gpio_desc *gpio_rst_n; + u32 edid_emulation; + bool enabled; +}; + +static inline struct ptn3460_bridge * + bridge_to_ptn3460(struct drm_bridge *bridge) +{ + return container_of(bridge, struct ptn3460_bridge, bridge); +} + +static inline struct ptn3460_bridge * + connector_to_ptn3460(struct drm_connector *connector) +{ + return container_of(connector, struct ptn3460_bridge, connector); +} + +static int ptn3460_read_bytes(struct ptn3460_bridge *ptn_bridge, char addr, + u8 *buf, int len) +{ + int ret; + + ret = i2c_master_send(ptn_bridge->client, &addr, 1); + if (ret <= 0) { + DRM_ERROR("Failed to send i2c command, ret=%d\n", ret); + return ret; + } + + ret = i2c_master_recv(ptn_bridge->client, buf, len); + if (ret <= 0) { + DRM_ERROR("Failed to recv i2c data, ret=%d\n", ret); + return ret; + } + + return 0; +} + +static int ptn3460_write_byte(struct ptn3460_bridge *ptn_bridge, char addr, + char val) +{ + int ret; + char buf[2]; + + buf[0] = addr; + buf[1] = val; + + ret = i2c_master_send(ptn_bridge->client, buf, ARRAY_SIZE(buf)); + if (ret <= 0) { + DRM_ERROR("Failed to send i2c command, ret=%d\n", ret); + return ret; + } + + return 0; +} + +static int ptn3460_select_edid(struct ptn3460_bridge *ptn_bridge) +{ + int ret; + char val; + + /* Load the selected edid into SRAM (accessed at PTN3460_EDID_ADDR) */ + ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_SRAM_LOAD_ADDR, + ptn_bridge->edid_emulation); + if (ret) { + DRM_ERROR("Failed to transfer EDID to sram, ret=%d\n", ret); + return ret; + } + + /* Enable EDID emulation and select the desired EDID */ + val = 1 << PTN3460_EDID_ENABLE_EMULATION | + ptn_bridge->edid_emulation << PTN3460_EDID_EMULATION_SELECTION; + + ret = ptn3460_write_byte(ptn_bridge, PTN3460_EDID_EMULATION_ADDR, val); + if (ret) { + DRM_ERROR("Failed to write EDID value, ret=%d\n", ret); + return ret; + } + + return 0; +} + +static void ptn3460_pre_enable(struct drm_bridge *bridge) +{ + struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge); + int ret; + + if (ptn_bridge->enabled) + return; + + gpiod_set_value(ptn_bridge->gpio_pd_n, 1); + + gpiod_set_value(ptn_bridge->gpio_rst_n, 0); + usleep_range(10, 20); + gpiod_set_value(ptn_bridge->gpio_rst_n, 1); + + /* + * There's a bug in the PTN chip where it falsely asserts hotplug before + * it is fully functional. We're forced to wait for the maximum start up + * time specified in the chip's datasheet to make sure we're really up. + */ + msleep(90); + + ret = ptn3460_select_edid(ptn_bridge); + if (ret) + DRM_ERROR("Select EDID failed ret=%d\n", ret); + + ptn_bridge->enabled = true; +} + +static void ptn3460_disable(struct drm_bridge *bridge) +{ + struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge); + + if (!ptn_bridge->enabled) + return; + + ptn_bridge->enabled = false; + + gpiod_set_value(ptn_bridge->gpio_rst_n, 1); + gpiod_set_value(ptn_bridge->gpio_pd_n, 0); +} + + +static struct edid *ptn3460_get_edid(struct drm_bridge *bridge, + struct drm_connector *connector) +{ + struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge); + bool power_off; + u8 *edid; + int ret; + + power_off = !ptn_bridge->enabled; + ptn3460_pre_enable(&ptn_bridge->bridge); + + edid = kmalloc(EDID_LENGTH, GFP_KERNEL); + if (!edid) { + DRM_ERROR("Failed to allocate EDID\n"); + goto out; + } + + ret = ptn3460_read_bytes(ptn_bridge, PTN3460_EDID_ADDR, edid, + EDID_LENGTH); + if (ret) { + kfree(edid); + edid = NULL; + goto out; + } + +out: + if (power_off) + ptn3460_disable(&ptn_bridge->bridge); + + return (struct edid *)edid; +} + +static int ptn3460_connector_get_modes(struct drm_connector *connector) +{ + struct ptn3460_bridge *ptn_bridge = connector_to_ptn3460(connector); + struct edid *edid; + int num_modes; + + edid = ptn3460_get_edid(&ptn_bridge->bridge, connector); + drm_connector_update_edid_property(connector, edid); + num_modes = drm_add_edid_modes(connector, edid); + kfree(edid); + + return num_modes; +} + +static const struct drm_connector_helper_funcs ptn3460_connector_helper_funcs = { + .get_modes = ptn3460_connector_get_modes, +}; + +static const struct drm_connector_funcs ptn3460_connector_funcs = { + .fill_modes = drm_helper_probe_single_connector_modes, + .destroy = drm_connector_cleanup, + .reset = drm_atomic_helper_connector_reset, + .atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state, + .atomic_destroy_state = drm_atomic_helper_connector_destroy_state, +}; + +static int ptn3460_bridge_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct ptn3460_bridge *ptn_bridge = bridge_to_ptn3460(bridge); + int ret; + + /* Let this driver create connector if requested */ + ret = drm_bridge_attach(bridge->encoder, ptn_bridge->panel_bridge, + bridge, flags | DRM_BRIDGE_ATTACH_NO_CONNECTOR); + if (ret < 0) + return ret; + + if (flags & DRM_BRIDGE_ATTACH_NO_CONNECTOR) + return 0; + + if (!bridge->encoder) { + DRM_ERROR("Parent encoder object not found"); + return -ENODEV; + } + + ptn_bridge->connector.polled = DRM_CONNECTOR_POLL_HPD; + ret = drm_connector_init(bridge->dev, &ptn_bridge->connector, + &ptn3460_connector_funcs, DRM_MODE_CONNECTOR_LVDS); + if (ret) { + DRM_ERROR("Failed to initialize connector with drm\n"); + return ret; + } + drm_connector_helper_add(&ptn_bridge->connector, + &ptn3460_connector_helper_funcs); + drm_connector_register(&ptn_bridge->connector); + drm_connector_attach_encoder(&ptn_bridge->connector, + bridge->encoder); + + drm_helper_hpd_irq_event(ptn_bridge->connector.dev); + + return ret; +} + +static const struct drm_bridge_funcs ptn3460_bridge_funcs = { + .pre_enable = ptn3460_pre_enable, + .disable = ptn3460_disable, + .attach = ptn3460_bridge_attach, + .get_edid = ptn3460_get_edid, +}; + +static int ptn3460_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct ptn3460_bridge *ptn_bridge; + struct drm_bridge *panel_bridge; + int ret; + + ptn_bridge = devm_kzalloc(dev, sizeof(*ptn_bridge), GFP_KERNEL); + if (!ptn_bridge) { + return -ENOMEM; + } + + panel_bridge = devm_drm_of_get_bridge(dev, dev->of_node, 0, 0); + if (IS_ERR(panel_bridge)) + return PTR_ERR(panel_bridge); + + ptn_bridge->panel_bridge = panel_bridge; + ptn_bridge->client = client; + + ptn_bridge->gpio_pd_n = devm_gpiod_get(&client->dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(ptn_bridge->gpio_pd_n)) { + ret = PTR_ERR(ptn_bridge->gpio_pd_n); + dev_err(dev, "cannot get gpio_pd_n %d\n", ret); + return ret; + } + + /* + * Request the reset pin low to avoid the bridge being + * initialized prematurely + */ + ptn_bridge->gpio_rst_n = devm_gpiod_get(&client->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(ptn_bridge->gpio_rst_n)) { + ret = PTR_ERR(ptn_bridge->gpio_rst_n); + DRM_ERROR("cannot get gpio_rst_n %d\n", ret); + return ret; + } + + ret = of_property_read_u32(dev->of_node, "edid-emulation", + &ptn_bridge->edid_emulation); + if (ret) { + dev_err(dev, "Can't read EDID emulation value\n"); + return ret; + } + + ptn_bridge->bridge.funcs = &ptn3460_bridge_funcs; + ptn_bridge->bridge.ops = DRM_BRIDGE_OP_EDID; + ptn_bridge->bridge.type = DRM_MODE_CONNECTOR_LVDS; + ptn_bridge->bridge.of_node = dev->of_node; + drm_bridge_add(&ptn_bridge->bridge); + + i2c_set_clientdata(client, ptn_bridge); + + return 0; +} + +static void ptn3460_remove(struct i2c_client *client) +{ + struct ptn3460_bridge *ptn_bridge = i2c_get_clientdata(client); + + drm_bridge_remove(&ptn_bridge->bridge); +} + +static const struct i2c_device_id ptn3460_i2c_table[] = { + {"ptn3460", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ptn3460_i2c_table); + +static const struct of_device_id ptn3460_match[] = { + { .compatible = "nxp,ptn3460" }, + {}, +}; +MODULE_DEVICE_TABLE(of, ptn3460_match); + +static struct i2c_driver ptn3460_driver = { + .id_table = ptn3460_i2c_table, + .probe = ptn3460_probe, + .remove = ptn3460_remove, + .driver = { + .name = "nxp,ptn3460", + .of_match_table = ptn3460_match, + }, +}; +module_i2c_driver(ptn3460_driver); + +MODULE_AUTHOR("Sean Paul "); +MODULE_DESCRIPTION("NXP ptn3460 eDP-LVDS converter driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3