From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/bridge/thc63lvd1024.c | 260 ++++++++++++++++++++++++++++++++++ 1 file changed, 260 insertions(+) create mode 100644 drivers/gpu/drm/bridge/thc63lvd1024.c (limited to 'drivers/gpu/drm/bridge/thc63lvd1024.c') diff --git a/drivers/gpu/drm/bridge/thc63lvd1024.c b/drivers/gpu/drm/bridge/thc63lvd1024.c new file mode 100644 index 000000000..e21078b2f --- /dev/null +++ b/drivers/gpu/drm/bridge/thc63lvd1024.c @@ -0,0 +1,260 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * THC63LVD1024 LVDS to parallel data DRM bridge driver. + * + * Copyright (C) 2018 Jacopo Mondi + */ + +#include +#include +#include +#include +#include +#include +#include + +#include +#include + +enum thc63_ports { + THC63_LVDS_IN0, + THC63_LVDS_IN1, + THC63_RGB_OUT0, + THC63_RGB_OUT1, +}; + +struct thc63_dev { + struct device *dev; + + struct regulator *vcc; + + struct gpio_desc *pdwn; + struct gpio_desc *oe; + + struct drm_bridge bridge; + struct drm_bridge *next; + + struct drm_bridge_timings timings; +}; + +static inline struct thc63_dev *to_thc63(struct drm_bridge *bridge) +{ + return container_of(bridge, struct thc63_dev, bridge); +} + +static int thc63_attach(struct drm_bridge *bridge, + enum drm_bridge_attach_flags flags) +{ + struct thc63_dev *thc63 = to_thc63(bridge); + + return drm_bridge_attach(bridge->encoder, thc63->next, bridge, flags); +} + +static enum drm_mode_status thc63_mode_valid(struct drm_bridge *bridge, + const struct drm_display_info *info, + const struct drm_display_mode *mode) +{ + struct thc63_dev *thc63 = to_thc63(bridge); + unsigned int min_freq; + unsigned int max_freq; + + /* + * The THC63LVD1024 pixel rate range is 8 to 135 MHz in all modes but + * dual-in, single-out where it is 40 to 150 MHz. As dual-in, dual-out + * isn't supported by the driver yet, simply derive the limits from the + * input mode. + */ + if (thc63->timings.dual_link) { + min_freq = 40000; + max_freq = 150000; + } else { + min_freq = 8000; + max_freq = 135000; + } + + if (mode->clock < min_freq) + return MODE_CLOCK_LOW; + + if (mode->clock > max_freq) + return MODE_CLOCK_HIGH; + + return MODE_OK; +} + +static void thc63_enable(struct drm_bridge *bridge) +{ + struct thc63_dev *thc63 = to_thc63(bridge); + int ret; + + ret = regulator_enable(thc63->vcc); + if (ret) { + dev_err(thc63->dev, + "Failed to enable regulator \"vcc\": %d\n", ret); + return; + } + + gpiod_set_value(thc63->pdwn, 0); + gpiod_set_value(thc63->oe, 1); +} + +static void thc63_disable(struct drm_bridge *bridge) +{ + struct thc63_dev *thc63 = to_thc63(bridge); + int ret; + + gpiod_set_value(thc63->oe, 0); + gpiod_set_value(thc63->pdwn, 1); + + ret = regulator_disable(thc63->vcc); + if (ret) + dev_err(thc63->dev, + "Failed to disable regulator \"vcc\": %d\n", ret); +} + +static const struct drm_bridge_funcs thc63_bridge_func = { + .attach = thc63_attach, + .mode_valid = thc63_mode_valid, + .enable = thc63_enable, + .disable = thc63_disable, +}; + +static int thc63_parse_dt(struct thc63_dev *thc63) +{ + struct device_node *endpoint; + struct device_node *remote; + + endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node, + THC63_RGB_OUT0, -1); + if (!endpoint) { + dev_err(thc63->dev, "Missing endpoint in port@%u\n", + THC63_RGB_OUT0); + return -ENODEV; + } + + remote = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + if (!remote) { + dev_err(thc63->dev, "Endpoint in port@%u unconnected\n", + THC63_RGB_OUT0); + return -ENODEV; + } + + if (!of_device_is_available(remote)) { + dev_err(thc63->dev, "port@%u remote endpoint is disabled\n", + THC63_RGB_OUT0); + of_node_put(remote); + return -ENODEV; + } + + thc63->next = of_drm_find_bridge(remote); + of_node_put(remote); + if (!thc63->next) + return -EPROBE_DEFER; + + endpoint = of_graph_get_endpoint_by_regs(thc63->dev->of_node, + THC63_LVDS_IN1, -1); + if (endpoint) { + remote = of_graph_get_remote_port_parent(endpoint); + of_node_put(endpoint); + + if (remote) { + if (of_device_is_available(remote)) + thc63->timings.dual_link = true; + of_node_put(remote); + } + } + + dev_dbg(thc63->dev, "operating in %s-link mode\n", + thc63->timings.dual_link ? "dual" : "single"); + + return 0; +} + +static int thc63_gpio_init(struct thc63_dev *thc63) +{ + thc63->oe = devm_gpiod_get_optional(thc63->dev, "oe", GPIOD_OUT_LOW); + if (IS_ERR(thc63->oe)) { + dev_err(thc63->dev, "Unable to get \"oe-gpios\": %ld\n", + PTR_ERR(thc63->oe)); + return PTR_ERR(thc63->oe); + } + + thc63->pdwn = devm_gpiod_get_optional(thc63->dev, "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(thc63->pdwn)) { + dev_err(thc63->dev, "Unable to get \"powerdown-gpios\": %ld\n", + PTR_ERR(thc63->pdwn)); + return PTR_ERR(thc63->pdwn); + } + + return 0; +} + +static int thc63_probe(struct platform_device *pdev) +{ + struct thc63_dev *thc63; + int ret; + + thc63 = devm_kzalloc(&pdev->dev, sizeof(*thc63), GFP_KERNEL); + if (!thc63) + return -ENOMEM; + + thc63->dev = &pdev->dev; + platform_set_drvdata(pdev, thc63); + + thc63->vcc = devm_regulator_get(thc63->dev, "vcc"); + if (IS_ERR(thc63->vcc)) { + if (PTR_ERR(thc63->vcc) == -EPROBE_DEFER) + return -EPROBE_DEFER; + + dev_err(thc63->dev, "Unable to get \"vcc\" supply: %ld\n", + PTR_ERR(thc63->vcc)); + return PTR_ERR(thc63->vcc); + } + + ret = thc63_gpio_init(thc63); + if (ret) + return ret; + + ret = thc63_parse_dt(thc63); + if (ret) + return ret; + + thc63->bridge.driver_private = thc63; + thc63->bridge.of_node = pdev->dev.of_node; + thc63->bridge.funcs = &thc63_bridge_func; + thc63->bridge.timings = &thc63->timings; + + drm_bridge_add(&thc63->bridge); + + return 0; +} + +static int thc63_remove(struct platform_device *pdev) +{ + struct thc63_dev *thc63 = platform_get_drvdata(pdev); + + drm_bridge_remove(&thc63->bridge); + + return 0; +} + +static const struct of_device_id thc63_match[] = { + { .compatible = "thine,thc63lvd1024", }, + { }, +}; +MODULE_DEVICE_TABLE(of, thc63_match); + +static struct platform_driver thc63_driver = { + .probe = thc63_probe, + .remove = thc63_remove, + .driver = { + .name = "thc63lvd1024", + .of_match_table = thc63_match, + }, +}; +module_platform_driver(thc63_driver); + +MODULE_AUTHOR("Jacopo Mondi "); +MODULE_DESCRIPTION("Thine THC63LVD1024 LVDS decoder DRM bridge driver"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3