From 5b7c4cabbb65f5c469464da6c5f614cbd7f730f2 Mon Sep 17 00:00:00 2001 From: Linus Torvalds Date: Tue, 21 Feb 2023 18:24:12 -0800 Subject: Merge tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next Pull networking updates from Jakub Kicinski: "Core: - Add dedicated kmem_cache for typical/small skb->head, avoid having to access struct page at kfree time, and improve memory use. - Introduce sysctl to set default RPS configuration for new netdevs. - Define Netlink protocol specification format which can be used to describe messages used by each family and auto-generate parsers. Add tools for generating kernel data structures and uAPI headers. - Expose all net/core sysctls inside netns. - Remove 4s sleep in netpoll if carrier is instantly detected on boot. - Add configurable limit of MDB entries per port, and port-vlan. - Continue populating drop reasons throughout the stack. - Retire a handful of legacy Qdiscs and classifiers. Protocols: - Support IPv4 big TCP (TSO frames larger than 64kB). - Add IP_LOCAL_PORT_RANGE socket option, to control local port range on socket by socket basis. - Track and report in procfs number of MPTCP sockets used. - Support mixing IPv4 and IPv6 flows in the in-kernel MPTCP path manager. - IPv6: don't check net.ipv6.route.max_size and rely on garbage collection to free memory (similarly to IPv4). - Support Penultimate Segment Pop (PSP) flavor in SRv6 (RFC8986). - ICMP: add per-rate limit counters. - Add support for user scanning requests in ieee802154. - Remove static WEP support. - Support minimal Wi-Fi 7 Extremely High Throughput (EHT) rate reporting. - WiFi 7 EHT channel puncturing support (client & AP). BPF: - Add a rbtree data structure following the "next-gen data structure" precedent set by recently added linked list, that is, by using kfunc + kptr instead of adding a new BPF map type. - Expose XDP hints via kfuncs with initial support for RX hash and timestamp metadata. - Add BPF_F_NO_TUNNEL_KEY extension to bpf_skb_set_tunnel_key to better support decap on GRE tunnel devices not operating in collect metadata. - Improve x86 JIT's codegen for PROBE_MEM runtime error checks. - Remove the need for trace_printk_lock for bpf_trace_printk and bpf_trace_vprintk helpers. - Extend libbpf's bpf_tracing.h support for tracing arguments of kprobes/uprobes and syscall as a special case. - Significantly reduce the search time for module symbols by livepatch and BPF. - Enable cpumasks to be used as kptrs, which is useful for tracing programs tracking which tasks end up running on which CPUs in different time intervals. - Add support for BPF trampoline on s390x and riscv64. - Add capability to export the XDP features supported by the NIC. - Add __bpf_kfunc tag for marking kernel functions as kfuncs. - Add cgroup.memory=nobpf kernel parameter option to disable BPF memory accounting for container environments. Netfilter: - Remove the CLUSTERIP target. It has been marked as obsolete for years, and we still have WARN splats wrt races of the out-of-band /proc interface installed by this target. - Add 'destroy' commands to nf_tables. They are identical to the existing 'delete' commands, but do not return an error if the referenced object (set, chain, rule...) did not exist. Driver API: - Improve cpumask_local_spread() locality to help NICs set the right IRQ affinity on AMD platforms. - Separate C22 and C45 MDIO bus transactions more clearly. - Introduce new DCB table to control DSCP rewrite on egress. - Support configuration of Physical Layer Collision Avoidance (PLCA) Reconciliation Sublayer (RS) (802.3cg-2019). Modern version of shared medium Ethernet. - Support for MAC Merge layer (IEEE 802.3-2018 clause 99). Allowing preemption of low priority frames by high priority frames. - Add support for controlling MACSec offload using netlink SET. - Rework devlink instance refcounts to allow registration and de-registration under the instance lock. Split the code into multiple files, drop some of the unnecessarily granular locks and factor out common parts of netlink operation handling. - Add TX frame aggregation parameters (for USB drivers). - Add a new attr TCA_EXT_WARN_MSG to report TC (offload) warning messages with notifications for debug. - Allow offloading of UDP NEW connections via act_ct. - Add support for per action HW stats in TC. - Support hardware miss to TC action (continue processing in SW from a specific point in the action chain). - Warn if old Wireless Extension user space interface is used with modern cfg80211/mac80211 drivers. Do not support Wireless Extensions for Wi-Fi 7 devices at all. Everyone should switch to using nl80211 interface instead. - Improve the CAN bit timing configuration. Use extack to return error messages directly to user space, update the SJW handling, including the definition of a new default value that will benefit CAN-FD controllers, by increasing their oscillator tolerance. New hardware / drivers: - Ethernet: - nVidia BlueField-3 support (control traffic driver) - Ethernet support for imx93 SoCs - Motorcomm yt8531 gigabit Ethernet PHY - onsemi NCN26000 10BASE-T1S PHY (with support for PLCA) - Microchip LAN8841 PHY (incl. cable diagnostics and PTP) - Amlogic gxl MDIO mux - WiFi: - RealTek RTL8188EU (rtl8xxxu) - Qualcomm Wi-Fi 7 devices (ath12k) - CAN: - Renesas R-Car V4H Drivers: - Bluetooth: - Set Per Platform Antenna Gain (PPAG) for Intel controllers. - Ethernet NICs: - Intel (1G, igc): - support TSN / Qbv / packet scheduling features of i226 model - Intel (100G, ice): - use GNSS subsystem instead of TTY - multi-buffer XDP support - extend support for GPIO pins to E823 devices - nVidia/Mellanox: - update the shared buffer configuration on PFC commands - implement PTP adjphase function for HW offset control - TC support for Geneve and GRE with VF tunnel offload - more efficient crypto key management method - multi-port eswitch support - Netronome/Corigine: - add DCB IEEE support - support IPsec offloading for NFP3800 - Freescale/NXP (enetc): - support XDP_REDIRECT for XDP non-linear buffers - improve reconfig, avoid link flap and waiting for idle - support MAC Merge layer - Other NICs: - sfc/ef100: add basic devlink support for ef100 - ionic: rx_push mode operation (writing descriptors via MMIO) - bnxt: use the auxiliary bus abstraction for RDMA - r8169: disable ASPM and reset bus in case of tx timeout - cpsw: support QSGMII mode for J721e CPSW9G - cpts: support pulse-per-second output - ngbe: add an mdio bus driver - usbnet: optimize usbnet_bh() by avoiding unnecessary queuing - r8152: handle devices with FW with NCM support - amd-xgbe: support 10Mbps, 2.5GbE speeds and rx-adaptation - virtio-net: support multi buffer XDP - virtio/vsock: replace virtio_vsock_pkt with sk_buff - tsnep: XDP support - Ethernet high-speed switches: - nVidia/Mellanox (mlxsw): - add support for latency TLV (in FW control messages) - Microchip (sparx5): - separate explicit and implicit traffic forwarding rules, make the implicit rules always active - add support for egress DSCP rewrite - IS0 VCAP support (Ingress Classification) - IS2 VCAP filters (protos, L3 addrs, L4 ports, flags, ToS etc.) - ES2 VCAP support (Egress Access Control) - support for Per-Stream Filtering and Policing (802.1Q, 8.6.5.1) - Ethernet embedded switches: - Marvell (mv88e6xxx): - add MAB (port auth) offload support - enable PTP receive for mv88e6390 - NXP (ocelot): - support MAC Merge layer - support for the the vsc7512 internal copper phys - Microchip: - lan9303: convert to PHYLINK - lan966x: support TC flower filter statistics - lan937x: PTP support for KSZ9563/KSZ8563 and LAN937x - lan937x: support Credit Based Shaper configuration - ksz9477: support Energy Efficient Ethernet - other: - qca8k: convert to regmap read/write API, use bulk operations - rswitch: Improve TX timestamp accuracy - Intel WiFi (iwlwifi): - EHT (Wi-Fi 7) rate reporting - STEP equalizer support: transfer some STEP (connection to radio on platforms with integrated wifi) related parameters from the BIOS to the firmware. - Qualcomm 802.11ax WiFi (ath11k): - IPQ5018 support - Fine Timing Measurement (FTM) responder role support - channel 177 support - MediaTek WiFi (mt76): - per-PHY LED support - mt7996: EHT (Wi-Fi 7) support - Wireless Ethernet Dispatch (WED) reset support - switch to using page pool allocator - RealTek WiFi (rtw89): - support new version of Bluetooth co-existance - Mobile: - rmnet: support TX aggregation" * tag 'net-next-6.3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1872 commits) page_pool: add a comment explaining the fragment counter usage net: ethtool: fix __ethtool_dev_mm_supported() implementation ethtool: pse-pd: Fix double word in comments xsk: add linux/vmalloc.h to xsk.c sefltests: netdevsim: wait for devlink instance after netns removal selftest: fib_tests: Always cleanup before exit net/mlx5e: Align IPsec ASO result memory to be as required by hardware net/mlx5e: TC, Set CT miss to the specific ct action instance net/mlx5e: Rename CHAIN_TO_REG to MAPPED_OBJ_TO_REG net/mlx5: Refactor tc miss handling to a single function net/mlx5: Kconfig: Make tc offload depend on tc skb extension net/sched: flower: Support hardware miss to tc action net/sched: flower: Move filter handle initialization earlier net/sched: cls_api: Support hardware miss to tc action net/sched: Rename user cookie and act cookie sfc: fix builds without CONFIG_RTC_LIB sfc: clean up some inconsistent indentings net/mlx4_en: Introduce flexible array to silence overflow warning net: lan966x: Fix possible deadlock inside PTP net/ulp: Remove redundant ->clone() test in inet_clone_ulp(). ... --- drivers/gpu/drm/display/drm_dp_aux_bus.c | 386 +++++++++++++++++++++++++++++++ 1 file changed, 386 insertions(+) create mode 100644 drivers/gpu/drm/display/drm_dp_aux_bus.c (limited to 'drivers/gpu/drm/display/drm_dp_aux_bus.c') diff --git a/drivers/gpu/drm/display/drm_dp_aux_bus.c b/drivers/gpu/drm/display/drm_dp_aux_bus.c new file mode 100644 index 000000000..f5741b45c --- /dev/null +++ b/drivers/gpu/drm/display/drm_dp_aux_bus.c @@ -0,0 +1,386 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright 2021 Google Inc. + * + * The DP AUX bus is used for devices that are connected over a DisplayPort + * AUX bus. The device on the far side of the bus is referred to as an + * endpoint in this code. + * + * There is only one device connected to the DP AUX bus: an eDP panel. + * Though historically panels (even DP panels) have been modeled as simple + * platform devices, putting them under the DP AUX bus allows the panel driver + * to perform transactions on that bus. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +struct dp_aux_ep_device_with_data { + struct dp_aux_ep_device aux_ep; + int (*done_probing)(struct drm_dp_aux *aux); +}; + +/** + * dp_aux_ep_match() - The match function for the dp_aux_bus. + * @dev: The device to match. + * @drv: The driver to try to match against. + * + * At the moment, we just match on device tree. + * + * Return: True if this driver matches this device; false otherwise. + */ +static int dp_aux_ep_match(struct device *dev, struct device_driver *drv) +{ + return !!of_match_device(drv->of_match_table, dev); +} + +/** + * dp_aux_ep_probe() - The probe function for the dp_aux_bus. + * @dev: The device to probe. + * + * Calls through to the endpoint driver probe. + * + * Return: 0 if no error or negative error code. + */ +static int dp_aux_ep_probe(struct device *dev) +{ + struct dp_aux_ep_driver *aux_ep_drv = to_dp_aux_ep_drv(dev->driver); + struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev); + struct dp_aux_ep_device_with_data *aux_ep_with_data = + container_of(aux_ep, struct dp_aux_ep_device_with_data, aux_ep); + int ret; + + ret = dev_pm_domain_attach(dev, true); + if (ret) + return dev_err_probe(dev, ret, "Failed to attach to PM Domain\n"); + + ret = aux_ep_drv->probe(aux_ep); + if (ret) + goto err_attached; + + if (aux_ep_with_data->done_probing) { + ret = aux_ep_with_data->done_probing(aux_ep->aux); + if (ret) { + /* + * The done_probing() callback should not return + * -EPROBE_DEFER to us. If it does, we treat it as an + * error. Passing it on as-is would cause the _panel_ + * to defer. + */ + if (ret == -EPROBE_DEFER) { + dev_err(dev, + "DP AUX done_probing() can't defer\n"); + ret = -EINVAL; + } + goto err_probed; + } + } + + return 0; +err_probed: + if (aux_ep_drv->remove) + aux_ep_drv->remove(aux_ep); +err_attached: + dev_pm_domain_detach(dev, true); + + return ret; +} + +/** + * dp_aux_ep_remove() - The remove function for the dp_aux_bus. + * @dev: The device to remove. + * + * Calls through to the endpoint driver remove. + */ +static void dp_aux_ep_remove(struct device *dev) +{ + struct dp_aux_ep_driver *aux_ep_drv = to_dp_aux_ep_drv(dev->driver); + struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev); + + if (aux_ep_drv->remove) + aux_ep_drv->remove(aux_ep); + dev_pm_domain_detach(dev, true); +} + +/** + * dp_aux_ep_shutdown() - The shutdown function for the dp_aux_bus. + * @dev: The device to shutdown. + * + * Calls through to the endpoint driver shutdown. + */ +static void dp_aux_ep_shutdown(struct device *dev) +{ + struct dp_aux_ep_driver *aux_ep_drv; + + if (!dev->driver) + return; + + aux_ep_drv = to_dp_aux_ep_drv(dev->driver); + if (aux_ep_drv->shutdown) + aux_ep_drv->shutdown(to_dp_aux_ep_dev(dev)); +} + +static struct bus_type dp_aux_bus_type = { + .name = "dp-aux", + .match = dp_aux_ep_match, + .probe = dp_aux_ep_probe, + .remove = dp_aux_ep_remove, + .shutdown = dp_aux_ep_shutdown, +}; + +static ssize_t modalias_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + return of_device_modalias(dev, buf, PAGE_SIZE); +} +static DEVICE_ATTR_RO(modalias); + +static struct attribute *dp_aux_ep_dev_attrs[] = { + &dev_attr_modalias.attr, + NULL, +}; +ATTRIBUTE_GROUPS(dp_aux_ep_dev); + +/** + * dp_aux_ep_dev_release() - Free memory for the dp_aux_ep device + * @dev: The device to free. + */ +static void dp_aux_ep_dev_release(struct device *dev) +{ + struct dp_aux_ep_device *aux_ep = to_dp_aux_ep_dev(dev); + struct dp_aux_ep_device_with_data *aux_ep_with_data = + container_of(aux_ep, struct dp_aux_ep_device_with_data, aux_ep); + + kfree(aux_ep_with_data); +} + +static struct device_type dp_aux_device_type_type = { + .groups = dp_aux_ep_dev_groups, + .uevent = of_device_uevent_modalias, + .release = dp_aux_ep_dev_release, +}; + +/** + * of_dp_aux_ep_destroy() - Destroy an DP AUX endpoint device + * @dev: The device to destroy. + * @data: Not used + * + * This is just used as a callback by of_dp_aux_depopulate_bus() and + * is called for _all_ of the child devices of the device providing the AUX bus. + * We'll only act on those that are of type "dp_aux_bus_type". + * + * This function is effectively an inverse of what's in + * of_dp_aux_populate_bus(). NOTE: since we only populate one child + * then it's expected that only one device will match all the "if" tests in + * this function and get to the device_unregister(). + * + * Return: 0 if no error or negative error code. + */ +static int of_dp_aux_ep_destroy(struct device *dev, void *data) +{ + struct device_node *np = dev->of_node; + + if (dev->bus != &dp_aux_bus_type) + return 0; + + if (!of_node_check_flag(np, OF_POPULATED)) + return 0; + + of_node_clear_flag(np, OF_POPULATED); + of_node_put(np); + + device_unregister(dev); + + return 0; +} + +/** + * of_dp_aux_depopulate_bus() - Undo of_dp_aux_populate_bus + * @aux: The AUX channel whose device we want to depopulate + * + * This will destroy the device that was created + * by of_dp_aux_populate_bus(). + */ +void of_dp_aux_depopulate_bus(struct drm_dp_aux *aux) +{ + device_for_each_child_reverse(aux->dev, NULL, of_dp_aux_ep_destroy); +} +EXPORT_SYMBOL_GPL(of_dp_aux_depopulate_bus); + +/** + * of_dp_aux_populate_bus() - Populate the endpoint device on the DP AUX + * @aux: The AUX channel whose device we want to populate. It is required that + * drm_dp_aux_init() has already been called for this AUX channel. + * @done_probing: Callback functions to call after EP device finishes probing. + * Will not be called if there are no EP devices and this + * function will return -ENODEV. + * + * This will populate the device (expected to be an eDP panel) under the + * "aux-bus" node of the device providing the AUX channel (AKA aux->dev). + * + * When this function finishes, it is _possible_ (but not guaranteed) that + * our sub-device will have finished probing. It should be noted that if our + * sub-device returns -EPROBE_DEFER or is probing asynchronously for some + * reason that we will not return any error codes ourselves but our + * sub-device will _not_ have actually probed successfully yet. + * + * In many cases it's important for the caller of this function to be notified + * when our sub device finishes probing. Our sub device is expected to be an + * eDP panel and the caller is expected to be an eDP controller. The eDP + * controller needs to be able to get a reference to the panel when it finishes + * probing. For this reason the caller can pass in a function pointer that + * will be called when our sub-device finishes probing. + * + * If this function succeeds you should later make sure you call + * of_dp_aux_depopulate_bus() to undo it, or just use the devm version + * of this function. + * + * Return: 0 if no error or negative error code; returns -ENODEV if there are + * no children. The done_probing() function won't be called in that + * case. + */ +int of_dp_aux_populate_bus(struct drm_dp_aux *aux, + int (*done_probing)(struct drm_dp_aux *aux)) +{ + struct device_node *bus = NULL, *np = NULL; + struct dp_aux_ep_device *aux_ep; + struct dp_aux_ep_device_with_data *aux_ep_with_data; + int ret; + + /* drm_dp_aux_init() should have been called already; warn if not */ + WARN_ON_ONCE(!aux->ddc.algo); + + if (!aux->dev->of_node) + return -ENODEV; + bus = of_get_child_by_name(aux->dev->of_node, "aux-bus"); + if (!bus) + return -ENODEV; + + np = of_get_next_available_child(bus, NULL); + of_node_put(bus); + if (!np) + return -ENODEV; + + if (of_node_test_and_set_flag(np, OF_POPULATED)) { + dev_err(aux->dev, "DP AUX EP device already populated\n"); + ret = -EINVAL; + goto err_did_get_np; + } + + aux_ep_with_data = kzalloc(sizeof(*aux_ep_with_data), GFP_KERNEL); + if (!aux_ep_with_data) { + ret = -ENOMEM; + goto err_did_set_populated; + } + + aux_ep_with_data->done_probing = done_probing; + + aux_ep = &aux_ep_with_data->aux_ep; + aux_ep->aux = aux; + aux_ep->dev.parent = aux->dev; + aux_ep->dev.bus = &dp_aux_bus_type; + aux_ep->dev.type = &dp_aux_device_type_type; + aux_ep->dev.of_node = of_node_get(np); + dev_set_name(&aux_ep->dev, "aux-%s", dev_name(aux->dev)); + + ret = device_register(&aux_ep->dev); + if (ret) { + dev_err(aux->dev, "Failed to create AUX EP for %pOF: %d\n", np, ret); + + /* + * As per docs of device_register(), call this instead + * of kfree() directly for error cases. + */ + put_device(&aux_ep->dev); + + goto err_did_set_populated; + } + + return 0; + +err_did_set_populated: + of_node_clear_flag(np, OF_POPULATED); + +err_did_get_np: + of_node_put(np); + + return ret; +} +EXPORT_SYMBOL_GPL(of_dp_aux_populate_bus); + +static void of_dp_aux_depopulate_bus_void(void *data) +{ + of_dp_aux_depopulate_bus(data); +} + +/** + * devm_of_dp_aux_populate_bus() - devm wrapper for of_dp_aux_populate_bus() + * @aux: The AUX channel whose device we want to populate + * @done_probing: Callback functions to call after EP device finishes probing. + * Will not be called if there are no EP devices and this + * function will return -ENODEV. + * + * Handles freeing w/ devm on the device "aux->dev". + * + * Return: 0 if no error or negative error code; returns -ENODEV if there are + * no children. The done_probing() function won't be called in that + * case. + */ +int devm_of_dp_aux_populate_bus(struct drm_dp_aux *aux, + int (*done_probing)(struct drm_dp_aux *aux)) +{ + int ret; + + ret = of_dp_aux_populate_bus(aux, done_probing); + if (ret) + return ret; + + return devm_add_action_or_reset(aux->dev, + of_dp_aux_depopulate_bus_void, aux); +} +EXPORT_SYMBOL_GPL(devm_of_dp_aux_populate_bus); + +int __dp_aux_dp_driver_register(struct dp_aux_ep_driver *drv, struct module *owner) +{ + drv->driver.owner = owner; + drv->driver.bus = &dp_aux_bus_type; + + return driver_register(&drv->driver); +} +EXPORT_SYMBOL_GPL(__dp_aux_dp_driver_register); + +void dp_aux_dp_driver_unregister(struct dp_aux_ep_driver *drv) +{ + driver_unregister(&drv->driver); +} +EXPORT_SYMBOL_GPL(dp_aux_dp_driver_unregister); + +static int __init dp_aux_bus_init(void) +{ + int ret; + + ret = bus_register(&dp_aux_bus_type); + if (ret) + return ret; + + return 0; +} + +static void __exit dp_aux_bus_exit(void) +{ + bus_unregister(&dp_aux_bus_type); +} + +subsys_initcall(dp_aux_bus_init); +module_exit(dp_aux_bus_exit); + +MODULE_AUTHOR("Douglas Anderson "); +MODULE_DESCRIPTION("DRM DisplayPort AUX bus"); +MODULE_LICENSE("GPL v2"); -- cgit v1.2.3